instruction manual easy step bed stair series-pg9760.pdfparts list for 3-step check that you have...
TRANSCRIPT
To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP [email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet™
INSTRUCTION MANUAL
EASY STEP BED STAIRPG9760
EASY STEP BED STAIR • PG97602
INSTRUCTIONS
You will be assembling two separate sets of stairs for our Easy Step Bed Stairs. The 3-step and the 2-step.
3-Step
2-Step
3EASY STEP BED STAIR • PG9760
PARTS LIST FOR 2-STEP
Check that you have all the parts shown BEFORE assembling your product.If any parts are missing, call Customer Service.
Dowel
Risers
Top Stair Bottom Stair
A B
C
E F
D
with Straight Edge with Curved Side
LEFT PANEL RIGHT PANEL
4 EASY STEP BED STAIR • PG9760
ASSEMBLY INSTRUCTIONS FOR 2-STEP
Step 1Place right panel, part (B) on floor with PET GEAR Logo facing the floor and insert top stair, part (E).
Keep the STRAIGHT EDGE toward the back and rug facing the top. Make sure there are no gaps between parts after inserting. (If inserting part is difficult put a little dish soap on doweled end before inserting.)
Step 2Insert riser, part (C). Make sure there are no gaps between parts after inserting.
Step 3Insert bottom stair, part (F). Note the CURVED SIDE direction. Make sure there are no gaps between parts after inserting.
Step 4Insert riser, part (C). Make sure there are no gaps between parts after inserting.
E
B
C
F
C
Stra
ight
Edg
e
Curved Side
5EASY STEP BED STAIR • PG9760
ASSEMBLY INSTRUCTIONS FOR 2-STEP
Step 5Insert dowel, part (D). Make sure there are no gaps between parts after inserting.
D
Step 6Attach left panel, part (A). Align all holes before pushing panel down. Make sure there are no gaps between parts after inserting.
A
B
B
EASY STEP BED STAIR • PG97606
PARTS LIST FOR 3-STEP
Check that you have all the parts shown BEFORE assembling your product.If any parts are missing, call Customer Service.
Dowels
Second Stair
with Curved Side
Carpet
Hidden Storage Panel
FRONT VIEWOF PARTS
Risers
D
N
Q
O
M
PR
C
I J
K L
Front Flat Panel
A
with Straight Edge
Top StairH G
Back Support Bar
Bottom Stair
LEFT PANEL RIGHT PANEL
EASY STEP BED STAIR • PG9760 7
PARTS LIST FOR 3-STEP
Check that you have all the parts shown BEFORE assembling your product.If any parts are missing, call Customer Service.
BACK VIEWOF PARTS
P
N M
OB
AB
RisersA
A
B
B
OP
IJ
A
J I
K L
D CG H
Second Stair
with Curved Side
CD
with Straight Edge
Top StairHG
KL
Front Flat Panel
Hidden Storage Panel
M N
Back Support Bar
Bottom Stair
LEFT PANEL RIGHT PANEL
8
ASSEMBLY INSTRUCTIONS FOR 3-STEP
LEFT PANEL
G
Step 1Place LEFT PANEL on floor with PET GEAR Logo facing the floor and insert top stair, PART G/H.
Keep the STRAIGHT EDGE toward the back and rug facing the top. Make sure there are no gaps between parts after inserting. (If inserting part is difficult put a little dish soap on doweled end before inserting.)
Step 2Insert RISER, PART B. Make sure there are no gaps between parts after inserting.
Step 3Insert SECOND STAIR, PART D/C. Note the CURVED SIDE direction. Make sure there are no gaps between parts after inserting.
B
LEFT PANEL
LEFT PANEL
D
EASY STEP BED STAIR • PG9760
Stra
ight
Edg
e
Curved Side
9
Step 6Insert FRONT FLAT PANEL, PART K/L. Make sure there are no gaps between parts after inserting.
ASSEMBLY INSTRUCTIONS FOR 3-STEP
B
LEFT PANEL
Step 4Insert RISER, PART B. Make sure there are no gaps between parts after inserting.
Step 5Insert BOTTOM STAIR, PART J/I. Note the CURVED SIDE direction. Make sure there are no gaps between parts after inserting.
LEFT PANEL
LEFT PANEL
J
K
EASY STEP BED STAIR • PG9760
Curved Side
10 EASY STEP BED STAIR • PG9760
ASSEMBLY INSTRUCTIONS FOR 3-STEP
Step 7Insert BACK SUPPORT BAR, PART P/O. Make sure there are no gaps between parts after inserting.
Insert 2 DOWELS, PART Q, as shown, right .
(If inserting part is difficult put a little dish soap on doweled end before inserting.)
Step 8Insert HIDDEN STORAGE PANEL PART N/M. Make sure there are no gaps between parts after inserting.
Step 9Attach RIGHT PANEL. Align all holes before pushing panel down. Make sure there are no gaps between parts after inserting.
P
Q Q
LEFT PANEL
N
LEFT PANEL
11EASY STEP BED STAIR • PG9760
ASSEMBLY INSTRUCTIONS FOR 3-STEP
Step 11Attach the CARPET, PART R, on the Velcro® strips to the 2-step, as shown above.
Back View.
2-Step
2-Step
Step 10Place the CARPET, PART R, on the Velcro® strips on the bottom step, as shown below.
12
WARNING!
FOR PETS ONLY.Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw
aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive, immature or untrained animals. Do not use near an open or exposed flame. Failure to follow these
warnings and the instructions could result in serious injury or death.
REPLACEMENT PARTS
EASY STEP BED STAIR • PG9760
Use only PET GEAR replacement parts.Please have your model number ready before calling.
You can also request parts: http://www.petgearinc.com/main.asp?sel=2
192 Sheldon Avenue • West Rutland, VT 05777 • 877-752-9123 • www.petgearinc.com