installation & un-installation of msg to mbox converter€¦ · installation guide of msg to...
TRANSCRIPT
P a g e 1 | 16
Installation Guide of MSG to MBOX Converter
Installation & Un-Installation of MSG to MBOX
Converter
P a g e 2 | 16
Installation Guide of MSG to MBOX Converter
Table of Contents
1. Introduction…………………………………………
2. System Requirements……………………………
3. Installing MSG to MBOX Converter………………………………………
4. Uninstalling MSG to MBOX
Converter………………………………………………………
a. Uninstalling the MSG to MBOX Converter from Start
Menu………………
b. Uninstalling the MSG to MBOX Converter from Control
Panel…………….
P a g e 3 | 16
Installation Guide of MSG to MBOX Converter
1. Introduction
Welcome to the Installation Guide of Birdie MSG to MBOX Converter
In this Software installation manual, we are going to give the installation
steps of Birdie MSG to MBOX Converter. Apart from software installation,
un-installation process of MSG to MBOX Converter is also included in this
guide.
2. System Requirements of the Installation
Before installing the Birdie MSG to MBOX Converter software, please check
that your machine should meets the basic requirements.
1. Windows Operating Systems, supports Windows 8.1 and all below
Windows OS versions
2. 2.4 GHZ Processer is recommended
3. 1 GB of RAM is Recommended
4. 4.94 MB of FREE hard disk space is required
P a g e 4 | 16
Installation Guide of MSG to MBOX Converter
3. Installing Birdie MSG to MBOX Converter software
For installing the MSG to MBOX Converter software you need software
installer file on your machine/system/computer. If you do not have the
software installer file, then you can get the file form -
http://www.birdiesoftware.com/msg-to-mbox/
After downloading the installer file, follow the following steps
P a g e 5 | 16
Installation Guide of MSG to MBOX Converter
1. Double Click on installer file >> Next
P a g e 6 | 16
Installation Guide of MSG to MBOX Converter
2. Select the “I accept the agreement” option >> Next
P a g e 7 | 16
Installation Guide of MSG to MBOX Converter
3. Now choose the location, where you want the software to be
installed. To change the destination, click on Browse option and
choose the preferred location. And click on Next button, once you
are done with selecting location.
P a g e 8 | 16
Installation Guide of MSG to MBOX Converter
4. Tool let you modify the shortcut folder. Click on “Next” option once
you’re done
P a g e 9 | 16
Installation Guide of MSG to MBOX Converter
5. Now, Software is ready to be install, Click on “Install” option
P a g e 10 | 16
Installation Guide of MSG to MBOX Converter
6. Software Installation will be started
P a g e 11 | 16
Installation Guide of MSG to MBOX Converter
7. When the software installation process is complete, this message will
show “Completing the MSG to MBOX Converter Setup Wizard”. Now
click on “Finish” button.
P a g e 12 | 16
Installation Guide of MSG to MBOX Converter
8. After Clicking on finish button, software will launch the first screen.
Welcome screen of Birdie MSG to MBOX Converter will appear like
this.
Now, to learn how to use the software, visit to software guide page:
http://www.birdiesoftware.com/msg-to-mbox/how-to.html
P a g e 13 | 16
Installation Guide of MSG to MBOX Converter
5. Uninstalling the MSG to MBOX Converter software
To uninstall the MSG to MBOX Converter follows the instruction:
Before software un-installation, make sure that, software is not running in
system background.
You can uninstall the software from your system by following two ways –
Uninstall by Windows start menu
Uninstall by Control Panel
P a g e 14 | 16
Installation Guide of MSG to MBOX Converter
To remove the software from Start menu follow the steps
Click on Start button >> All Program >>Birdie MSG to MBOX Converter >>
Uninstall
If you are sure about uninstalling the software, click on Yes Button.
After this software un-installing process will start and after completing the
un-installation process, this Message will be shown>> click on OK
P a g e 15 | 16
Installation Guide of MSG to MBOX Converter
Second, Uninstall software from control panel
Go to start menu >> Control Panel >> Programs >> Double Click on MSG to
MBOX Converter >> Click on Yes
P a g e 16 | 16
Installation Guide of MSG to MBOX Converter
After this software un-installing process will start and after completing the
un-installation process, Message will be shown>> click on OK
After this you can successfully remove MSG to MBOX Converter software
from you system.