installation, removal, maintaining flange coupling rfn 5571 en
TRANSCRIPT
Partner for performancewww.ringfeder.com
RfN 5571 Version A RfN 5571 Version B
Installation, Removal, MaintainingFlange coupling RfN 5571
EN01|2015
2/21
! TA!
MoS2
MoS21 1
RfN 5571 Version A RfN 5571 Version B
EN 01.2015
Flange coupling RfN 5571
Safety instructions
Rotating machine parts may injure operators and service staff!Therefore:
• Switch off the drive before assembly work.
• Safeguard the machine against accidental switch-on.
• Mount all covers and protection devices before switching on the machine.
• RINGFEDER® products may only be mounted by specialist staff and for suitable applications.
Installation, Removal, Maintaining
Attention
• Study the assembly instructions thoroughly.
• Contravention of assembly or safety instructions will void all claims under warranty.
• RINGFEDER® reserves the right to technical changes to improve the product.
• RINGFEDER® flange couplings are accepted state of the art.
For any questions or technical problems, please contact our technicians and engineers. See overleaf for contact details.
Lubricants used ex factory (cone and bolt)
Legend
Removal Maintaining Cleaning
Repeat the described procedure as many times as specified (left – tighten clockwise, right – tighten crosswise).
Loosen bolts slightly.
Attention! Absolutely observe!
Refer to the current shrink disc catalogue for data on the required torques. Please check whether the ma-nufacturer of the machine / plant has specified different torques.
Check for permissible peak-to-valley height.
Oil hub and shaft lightly, if necessary (do not use oil containing MoS2).
Grease marked surfaces with Molykote.
Installation
Designation CAS number (ROHS):
Molykote “G Rapid Plus” or comparable lubricant (µ = 0.05) 1305-62-0
3/21
RfN 5571 Version A
1
4
2
5
3
4
5
2
1
3
EN 01.2015
Flange with outside centering
Flange with inside centering
Flange screw connection
Shrink disc
Shaft
4/21
RfN 5571 Version A
2
3
1
!
4
1
5
1.1.
2.
2.
MoS22
EN 01.2015
5/21
RfN 5571 Version A
7
81/3 TA
TA
TA!
1
≥3
2/3 TA9
1
23
10
6
11
EN 01.2015
6/21
RfN 5571 Version A
1312TA
TA!
≥2
EN 01.2015
7/21
RfN 5571 Version B
2
4
5
1
4
2
5
3
1
3
EN 01.2015
Flange with outside centering
Flange with inside centering
Flange screw connection
Shrink disc
Shaft
8/21
RfN 5571 Version B
2
3
1
!
4
MoS2
1
2
5
1.
3.
3.1.
2.2.
EN 01.2015
9/21
RfN 5571 Version B
7
81/3 TA
TA
TA!
1
≥3
2/3 TA9
10
1
23
6
11
EN 01.2015
10/21
RfN 5571 Version B
1312TA
TA!
≥2
EN 01.2015
11/21
RfN 5571 Version A
1
2
!
≥3
EN 01.2015
12/21
RfN 5571 Version A
43
5
EN 01.2015
13/21
RfN 5571 Version B
1
2
!
≥3
EN 01.2015
14/21
RfN 5571 Version B
43
5
EN 01.2015
15/21
RfN 5571 Version A
1
!
MoS2
2
5
MoS2
1
2
43
Ra ≤ 3,2 µm
EN 01.2015
16/21
RfN 5571 Version A
8
6 7
1.1.
2.
2.
9
101/3 TA
TA
TA!
1
≥3
2/3 TA
1
23
11
EN 01.2015
17/21
RfN 5571 Version A
12 13
14TA
TA!
≥2
EN 01.2015
18/21
RfN 5571 Version B
43
Ra ≤ 3,2 µm
1
!
MoS2
2
5
MoS2
1
2
EN 01.2015
19/21
RfN 5571 Version B
6 7
1.
3.
3.1.
2.2.
9
10
TA
TA!
1
≥3
2/3 TA
1
23
8
11
EN 01.2015
20/21
RfN 5571 Version B
12 13
14TA
TA!
≥2
EN 01.2015
www.ringfeder.comRINGFEDER POWER TRANSMISSION
RINGFEDER POWER TRANSMISSION GMBHWerner-Heisenberg-Straße 18, D-64823 Groß-Umstadt, Germany · Phone: +49 (0) 6078 9385-0 · Fax: +49 (0) 6078 9385-100 E-mail: [email protected]
RINGFEDER POWER TRANSMISSION TSCHAN GMBHZweibrücker Strasse 104, D-66538 Neunkirchen, Germany · Phone: +49 (0) 6821 866-0 · Fax: +49 (0) 6821 866-4111 E-mail: [email protected]
RINGFEDER POWER TRANSMISSION USA CORPORATION165 Carver Avenue, Westwood, NJ 07675, USA · Toll Free: +1 888 746-4333 · Phone: +1 201 666 3320Fax: +1 201 664 6053 · E-mail: [email protected]
RINGFEDER POWER TRANSMISSION INDIA PRIVATE LIMITEDPlot No. 4, Door No. 220, Mount - Poonamallee Road, Kattupakkam, Chennai – 600 056, IndiaPhone: +91 (0) 44-2679-1411 · Fax: +91 (0) 44-2679-1422 · E-mail: [email protected]
KUNSHAN RINGFEDER POWER TRANSMISSION COMPANY LIMITEDGerman Industry Park, No. 10 Dexin Road, Zhangpu 215321, Kunshan, Jiangsu Province, P.R. ChinaPhone: +86 (0) 512-5745-3960 · Fax: +86 (0) 512-5745-3961 · E-mail: [email protected]