installation & operating manual...• front hinged door, with ¼ turn thumb latch, to access...

INSTALLATION&OPERATINGMANUAL REVISION:07/2020|page1of16

CONTENTS:

Chapter Description Page

1. Introduction .......................................................... 1

2. ModelsandSpecifications .................................... 3

3. ProductSafety ...................................................... 4

4. Structure ............................................................... 5

5. LocationAdvice ..................................................... 5

8. GeneralMaintenance ......................................... 13

9. AfterSalesandServiceSupport ......................... 13

10. Warranty ............................................................. 13

Chapter1.INTRODUCTION

ThankyouforpurchasingMechline’sBaSixTMmobilehandwashstation.Whencorrectlyinstalled,andoperatedinaccordancewiththisOperatorManual,itwillprovidemanyyearsofservice.

Mechline’shygienichand-washingsolutionshelpoperationsmeettheirrequirementstoprovidehand-washfacilitiesforstaffandcustomersonsite.Bygivingtoolstomakeiteasierandfaster,goodandsafehabitsaremoreeasilyfollowedandenforced.

Hands-freetechnologyimproveshealthandsafety,byremovingtheneedformanualcontactandpreventingthespreadofgermsbyhand.

Hand-washingisthenumberonepreventionagainstthespreadofviruses,bacteriaandotherpathogens.Goodhand-washinghabitscanbeencouragedwiththerightequipmentinstalledinthecorrectposition.

Spoutwithwatersavingdiffuser–OurBSX-MHB-Xmodelwillprovideapprox.223handwashcyclesfrom1x12.5Lwatercontainer.Ifthealternativeultrawater-savingdiffuserisfittedtothespout,thiswouldprovideapprox.304handwashcyclesfrom1x12.5Lwatercontainer.OurBSX-MHB-HWCandHWC-Tmodelscanreduceyourwaterconsumptiontoaslittleas0.6lpmwhenconnectedtomainswater(testedat3barpressure).

Portable–Allmodelscanbetransportedwitheaseusingthecastorsandgrabhandle.Idealforuseatentrancestobuildings/operations.Thecastorscanberemovedtoallowflushtowallfittingifdesired.

LEAVE THIS MANUAL WITH THE OPERATOR AFTER INSTALLATION

6. INSTALLATIONINSTRUCTIONS ............................. 6

7. OPERATINGINSTRUCTIONS ................................ 12

INSTALLATION & OPERATING MANUALMODELS: BSX-MHB-X / BSX-MHB-HCW / BSX-MHB-HCW-T

Mobile Hand Wash Station

REVISION:07/2020|page2of16INSTALLATION&OPERATINGMANUAL


INSTALLATION&OPERATINGMANUALREVISION:07/2020|page3of16

Chapter2.MODELSandSPECIFICATIONS

Modelnumbers BSX-MHB-X BSX-MHB-HCW BSX-MHB-HCW-T

Region UK/International

MODELFEATURESStandard • 2xremovablecastors

• Splashbackwithintegratedgrabhandle

• Fronthingeddoor,with¼turnthumblatch,toaccessstoredcontainers

• Built-inslotsinsidepanelsforhangingbinandtoweldispenseroptions

• 2x12.5Lcontainersforwaterfeedandwastewatercollection

• ReinforcedPVCwaterhoses

• Flexiblewasteconnection• Manualfootpumpvalve

• Spoutfittedwithwater-savingdiffuser

• Alternativeultrawater-savingspoutdiffusersupplied

• 2xremovablecastors• Splashbackwith

integratedgrabhandle

• Fronthingeddoor,with¼turnthumblatch,toaccessservicesandinternallowerstorageshelf


• Built-incut-outswithremovablecoverstotherearandsidepanels-forwasteandwaterservicesconnection

• Timeflowfootvalve• Manualmixervalve


• 2xremovablecastors• Splashbackwith

integratedgrabhandle

• Fronthingeddoor,with¼turnthumblatch,toaccessservicesandinternallowerstorageshelf


• Built-incut-outswithremovablecoverstotherearandsidepanels-forwasteandwaterservicesconnection

• Timeflowfootvalve• Thermostaticmixervalve


Optional

• Deckmountedsoapdispenser

• Spare12.5Lcontainers

• Hangingbinand/ortoweldispenser





SITE&INSTALLREQUIREMENTS

Site

NOwater/wasteconnectionorelectricity

required.NB:COLDwateroperationonlyviastoredcontainers

Hotandcoldwater(minimum1.5bar)and

wasteconnection

Hotandcoldwater(minimum1.5bar)and

wasteconnection

Installation ! Freestanding! Wallfixing-optional

MATERIALS

Mainbody 430stainlesssteel

Basinbowl 304stainlesssteel

Footplate Reinforced,heavy-dutystainlesssteel

DIMENSIONS&WEIGHTS

Dimensions 1222mm(H)X382mm(W)X360mm(D)

Netweight 15.5kg 15.6kg 15.6kg



Chapter3.PRODUCTSAFETY

3.1SYMBOLS

MEANING/DESCRIPTION SYMBOL

UsePPETheuseofsuitablePPE,suchasgloves,isrecommendedwhencleaningormaintainingthisproduct.

Warning/CautionAnappropriatesafetyinstructionshouldbefollowedorcautiontoapotentialhazardexists.

RefertoManualRefertotherelevantinstructionsdetailedwithintheproductmanual.

Beforeoperatingtheunit,readtheseinstructionscarefully.Correctinstallationandoperationwillprovideoptimumperformanceandalongerlife.

3.2SAFETYINSTRUCTIONS

3.3PRODUCTCONFORMITY

3.3.1 ThemobilehandwashstationrangeissuppliedtothemarketplacehavingbeenproducedunderthecontrolofourcomprehensiveBSIISO9001:2015QualityManagementSystem(certificateFS616985).

3.2.1 Childrenshouldbesupervisedwhileusingthemobilehandwashrange.

3.2.2 Unitsshouldbeusedasintendedandnotbetamperedwithoralteredasthesafetyoftheunitmaybecompromised.

3.2.3 TheBSX-MHB-Xversionisdesignedtobeusedindoorsandoutdoors.Werecommendstorageindoorswhenproductisnotinuse.



Chapter4.STRUCTURE

Chapter5.LOCATIONADVICE

• TheBSX-MHB-Xmodelisdesignedtobeusedindoorsandoutdoors.Werecommendstorageindoorswhenproductisnotinuse.

• Modelscanbefreestandingorwallfixed.

BSX-MHB-X BSX-MHB-HCW BSX-MHB-HCW-TA SplashbackB GrabhandleC SpoutD Water-savingdiffuser

E Built-insideslotsonbothsides-foroptionalhangingbinand/ortoweldispenser

F Built-inhatchesonbothsideswith

removablepanels-forwasteandwaterservicesconnection

G DoorH ¼turnthumblatch

IInternalshelf

forwater/wastecontainers

Internalstorageshelf

J ProtectiveedgetrimK 2xCastors

L ReinforcedPVCHoses Stainlesssteelbraidedhose

M Manualfootpumpvalve Timeflowfootvalve

N Barbedhoseconnection

Manualmixingvalve

Thermostaticmixingvalve

O Reinforced,stainlesssteelfootplate

PWastewater

container(storedleft)

QFreshwatercontainer

(storedright)

R Flexiblewasteconnection

S Optionaldeckmountedsoapdispenser

A C

B

N D

E

G

H

G

H

I

I

J K

L

L

M

M

BSX-MHB-HCW

BSX-MHB-HCW-T

BSX-MHB-X

O

O

E

S

S

R

P Q

J

A

B

C

D

F

K

N

N



Chapter6.INSTALLATIONINSTRUCTIONS

6.1 Equipmentneeded:

6.2 Installspout-usespannertotighten.

6.3 Laysplashbackonaflatsurface.Removescrewsandputaside.



6.4 Slideframestoaligntop2holeswithsplashbackholes.Withholesaligned,fitscrews.

6.5 Splashbackisnowreadytobefittedontothemainbody.



6.6 Slidefittedsplashbackontomainbodyasshown.Ensurebowlsplashbacksitsbehindmainbodysplashback.Oncethesplashbackisplacedintopositionandholesalign,fitscrews.

Splashbackisnowinstalled.

6.7 Ifneeded,fitcastors.

Bowlsplashback



6.8 Ifneeded,removecoverplatestorunwaterandwasteservices,asappropriate.

6.9 Modelsaresuppliedwithawater-savingdiffuserreadyfittedinthespout.FormodelsBSX-MHB-HCWandBSX-MHB-HCW-Tthewater-savingdiffusercanbeswappedfortheSTANDARDdiffuser.FortheBSX-MHB-Xmodelthewater-savingdiffusercanbeswappedfortheULTRAwater-savingdiffuser.

HOWTOREPLACEDIFFUSER:Manuallyunscrewthediffuser,removethewasherandtheinsert(diffuser).Replacewiththealternativediffuser,ensuringthattheexistingwasherisre-usedwhenfitting.

6.10 FormodelsBSX-MHB-HCWandBSX-MHB-HCW-Tfinalconnectionstomainswaterfeedandwaste(1¼inch)

tobecompletedbytheinstaller.

6.11 ForinstallingandoperatingmixingvalvesforBSX-MHB-HCWandBSX-MHB-HCW-Tseesections6.12or6.13.

Washer



6.12 MANUALMIXINGVALVE–suppliedwithmodelBSX-MHB-HCW

6.12.1 Technicalfeatures

• Balancedwaterpressuresuppliesrequired.Pressurerange1.5-3Bar.Holdandcoldpressureshouldbenomorethan1barflowdifferential.

• JointsealstobemadeusingPTFEtapeONLY.

• NOJOINTINGCOMPOUNDStobeusedunderanycircumstances.

• Thepreferredlocationforthemanualmixingvalveisnexttothetimeflowfootvalve.However,ifdesired,thiscanbeinstalledattheinletendofthewatersupply.

6.12.2 Installation

NOTE:Installmanualmixingvalvewithadjustablevalvesfacingtheinstaller.

• Recommendedpressurerange1.5-3Bar.

• ConnectthecoldwatersupplytotheinletontheLHSasviewedfromtheviewinpictureabove.

• ConnectthehotwatersupplytotheinletontheRHSasviewedfromtheviewinpictureabove.

6.12.3 Calibratingthetemperature

Afterinstallationturntheadjustmentsscrewsusinga3mmAllenkeyuntilthedesiredwatertemperaturedeliverytothespoutisachieved.Turnclock-wisetoclosethevalveandanti-clockwisetoopenthevalve.

INPUT COLD

INPUT HOT

Adjustmentscrews



6.13 THERMOSTATICMIXINGVALVE–suppliedwithmodelBSX-MHB-HCW-T

6.13.1 Technicalfeatures

• Integratednon-returnvalvesandfilters.

• Pre-setat38°C(CWandHWpressure3bar).

• Minimummixedwatertemperature:34°C.

• Anti-scaldingfail-safeactivatesif:o themixedwatertemperatureexceeds42°C.o thedifferencebetweentheHWandCWisgreaterthan15°C.

NOTE:Responsetime~2seconds.

• Thepreferredlocationforthethermostaticmixingvalveisnexttothetimeflowfootvalve,underthefootplate.However,ifdesired,thiscanbeinstalledattheinletendofthewatersupply.

6.13.2 Installation

• Recommendeddynamicpressure:1-5bar.

• HWsupplytemperature:55-85°C.

• CWsupplytemperature:5-20°C.

• BalancetheHW/CWpressure(∆P<1bar).

• PREMIXNANOcanbeinstalledinanyposition.

• Connectthehotwatersupplytotheinletwitharedmarkerandthecoldwatertotheinletwithabluemarker.

6.13.3 Calibratingthetemperature

Itispossibletochangethemixedwatertemperatureby:

• Removingthecap

• Turningthescrewwitha5mmAllenkey-clockwisetoreducethetemperatureandanti-clockwisetoincreasethetemperature.

NOTE:Theadjustorscrewturnscontinuouslybelow34°C.

• Oncethedesiredtemperaturehasbeenachieved,replacethecap.

Adjustmentscrews

Cap



Chapter7.OPERATINGINSTRUCTIONS

7.1 ModelsBSX-MHB-HCWandBSX-MHB-HCW-T

Important!Followinginstallation,thetimeflowvalveneedstobeprimedtoremoveairfromthehose.

Actuatetimeflowvalvebycompressingandreleasingbyfoot.At3barwaterpressure,eachactuationwillprovidearuntimeof8to12seconds.Repeatasnecessary.7.2 ModelBSX-MHB-X

Important!Followinginstallation,orfollowingwatercontainerrefill,themanualfootpumpneedstobeprimedtoremoveairfromthehose.Actuatemanualfootpumpbycompressingandreleasing.Eachcompressionwilldeliverwatertothespout.Repeatasnecessary.

7.2.1 Removeemptywaterfeedcontainer.Liftoutfeedhose.

7.2.2 Liftflexiblewastehoseoutofwastecontainer.

7.2.3 Removewastecontainerfromunit.Ensurecontainerscrewcapisreplaced.Disposeofwastewater.NOTE:Becarefultomanoeuvrethecontainersaroundtheflexiblewastefittingstopreventdamage.NOTE:Wastewaterisdirtyandmustbedisposedofresponsibly.

7.2.4 EnsureemptywastecontainerisreplacedintotheLHSoftheunitwithneckfacingfrontandscrewcapremoved.Reinsertflexiblewastehoseintoneckofthecontainer.

7.2.5 Oncerefilled,replacewaterhoseintofreshwatercontainerandreinsertintotheRHSoftheunitwiththeneckofthecontainerfacingtherear.NOTE:Becarefultomanoeuvrethecontainersaroundtheflexiblewastefittingstopreventdamage.NOTE:Whentransportingfullwatercontainersensurescrewcapisfitted.

7.2.6 Followingeachwatercontainerrefillmanualfootpumpneedstobeprimedtoremoveairfromthehose.



Chapter7.OPERATINGINSTRUCTIONS

7.1 ModelsBSX-MHB-HCWandBSX-MHB-HCW-T

Important!Followinginstallation,thetimeflowvalveneedstobeprimedtoremoveairfromthehose.

Actuatetimeflowvalvebycompressingandreleasingbyfoot.At3barwaterpressure,eachactuationwillprovidearuntimeof8to12seconds.Repeatasnecessary.7.2 ModelBSX-MHB-X

Important!Followinginstallation,orfollowingwatercontainerrefill,themanualfootpumpneedstobeprimedtoremoveairfromthehose.Actuatemanualfootpumpbycompressingandreleasing.Eachcompressionwilldeliverwatertothespout.Repeatasnecessary.

7.2.1 Removeemptywaterfeedcontainer.Liftoutfeedhose.

7.2.2 Liftflexiblewastehoseoutofwastecontainer.

7.2.3 Removewastecontainerfromunit.Ensurecontainerscrewcapisreplaced.Disposeofwastewater.NOTE:Becarefultomanoeuvrethecontainersaroundtheflexiblewastefittingstopreventdamage.NOTE:Wastewaterisdirtyandmustbedisposedofresponsibly.

7.2.4 EnsureemptywastecontainerisreplacedintotheLHSoftheunitwithneckfacingfrontandscrewcapremoved.Reinsertflexiblewastehoseintoneckofthecontainer.

7.2.5 Oncerefilled,replacewaterhoseintofreshwatercontainerandreinsertintotheRHSoftheunitwiththeneckofthecontainerfacingtherear.NOTE:Becarefultomanoeuvrethecontainersaroundtheflexiblewastefittingstopreventdamage.NOTE:Whentransportingfullwatercontainersensurescrewcapisfitted.

7.2.6 Followingeachwatercontainerrefillmanualfootpumpneedstobeprimedtoremoveairfromthehose.


Chapter8.GENERALMAINTENANCE

RefertoChapter3ofthismanual,relatingtosafety.

Thegradeofstainlesssteelusedtomanufacturethisappliance(430ASI)hasbeenchosentoofferenhancedcorrosionprotection.However,allgradesofstainlesssteelcanstainanddiscolourthroughgeneraluse.InordertokeepyourBaSixproductingoodcondition,itshouldbekeptascleanaspossible.Withpropercare,yourBaSixproductwillgivemanyyearsofservicelife.

Careshouldbetakenduringinstallationtoensurethatsurfacecontaminationisavoided.Thebestwaytodothisistoleavetheprotectiveplasticfilminplaceifpossible,duringinstallation,andthenremoveitjustbeforetheproductisused.

Forgeneralcleaning,usesoaporamilddetergentandwateronasponge.Rinsewithcleanwaterandwipedryifnecessary.Avoidabrasivecleaningproductssuchasscourers.Themobilebasinrangemustbeinstalledandoperatedincompliancewiththesuppliedinstructions.

• TheuseofsuitablePPE,suchasgloves,isrecommendedwhencleaningormaintainingthisproduct.

• Donotuseabrasive,chlorineoracid-basedcleaningproducts.Avoidcontactwithconcentratedbleach.Cleanwithsoapywaterusingaclothorsponge.

Chapter9.AFTERSALESandSERVICESUPPORT

TECHNICALASSISTANCE

Call:+44(0)1908251511andaskfortheTechnicalHelpdesk.

Or,e-mail:[email protected]

Chapter10.WARRANTY

Themobilehandwashstationiscoveredbya12monthpartsonlymanufacturer’swarrantyfromthedateofinvoice,againstdefectiveworkmanshiporfaultyparts.Termsandconditionsapply.

Pleasecontactyourlocaldistributororvisitwww.mechline.comforsparepartrequests.



NOTES ..............................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

.........................................................................................................................................................................................

©2020 All rights reserved. All material on these pages, including and without limitation text, logos, icons, photographs and all other artwork, is copyright material of Mechline Developments Ltd, unless otherwise stated. Commercial use of this material may only be made with the express, prior, written permission of Mechline. This includes material provided by any third party, including material obtained through links to other sites from Mechline’s pages or its affiliates and commercial associates. Material and information included are correct at time of print. Intending buyers and users must satisfy themselves as to the suitability and safety of the products for their particular purposes and duties. Dimensions shown in mm unless otherwise stated. Product accreditation may not apply to all products in the relevant range. Please contact Mechline to confirm. Unless otherwise stated, all products carry a warranty of twelve (12) months against manufacturing defect or workmanship on parts with no inclusion for labour or site attendance. (MHWB-14) Rev. 07/2020

MECHLINE DEVELOPMENTS LIMITED | Telephone: +44 (0)1908 261511 | Email: [email protected] | Web: www.mechline.com

Distributed by:

installation & operating manual...• front hinged door, with ¼ turn thumb latch, to access...

Documents