Nana Wall Systems, Inc.

100 Meadowcreek Drive #250

Corte Madera, CA 94925

800 873 5673

415 383 3148

Fax 415 383 0312

info@nanawall.com nanawall.com

©2020 Nana Wall Systems, Incr09.2020

Installation Manual PrivaSEESingle Track Sliding Frameless System

Level at least 6'0"

516 "

8Drill1 14 "

32

Core Drill Bitfor Pivot Point

Crowbar Soft Face Hammer

1"25

Core Drill Bitfor Eccentric Floor Socket

2,5mm allen wrench

3mm allen wrench

4mm allen wrench

5mm allen wrench

6mm allen wrench

Metric Tape Measure

2mm allen wrench

Page

Required Tools1. Rough Opening and Unit Dimensions2. Head Track in "kd" (knocked down) Condition3. Head Track Connector for Sidejamb4. Assembly of Head Track 5. Head Track Shimming6. Installation of Floor Closer for Single Action Offset End Panel7. Installation Sequence of Panels8. Panel Alignment and Height Adjustment9. Drilling Holes for Floor Sockets 10. Panel Installation for non-entry Single Action Offset End Panel11.

and Single Action End Panel with Floor Closer Field Applying Vertical H- and h-gaskets and 12.

Height Adjustment of Bottom Compression Seal Installation of Mortise Cylinder (on Inside only)13.

TOOLSTable of ContentsRev. October 14 2020

NanaWall Product Drawing

Wrench22mm

Wrench19mm

Wrench17mm

Wrench11mm

Wrench10mm

Metric Tools Supplied in Accessory Box

Installation ManualSHEET 1 OF 13PrivaSEE

#1 #2 #3

34 "19

12 "13

34 "19

12 "13

Rough Opening Dimensions- after applying all deadloads max. deflection of header the lesser of L/720 or 1/4"- the weight of a panel with 1/2" glass is 8 lbs/sqft

Unit Dimensions- leave enough shim space to surrounding condition

SHEET 2 OF 13Installation ManualPrivaSEE

9 1316 "250

9 1316 "250

9 1316 "250

12 "13

38 "9

14 "6

recommendednot recommended

IF YOU WANT TO RECESS THE HEAD TRACK INTO THE CEILING, WE RECOMMEND TO LEAVE 1/4" (6MM) VISIBLE TO AVOID SCRUB MARKS FROM THE TOP BRUSH SEALS IN THE AREA OF THESWING PANEL, STACKING BAYS AND 90° CORNER TURNS.

[2"]50

[2"]50

L-Profile for drop down ceiling can't be installed where a radius is located

9 1316 "250

9 1316 "250

9 1316 "250

Top Track Comes Pre-Drilled

Head Track in "kd" Condition

NanaWall does not provide nor take responsibility for sizes, location or frequency of perimeter fasteners.

L-Profile in 9'6" length(2900mm) for drop down ceiling to be cut in the fieldoptional by NanaWall

SHEET 3 OF 13Installation ManualPrivaSEE

HWHW

1'2 18 "358

4 18 "105

2"51

2 58 "66

Wall

1'1 716 "

341

2 18 "54

3 116 "78

2 12 "63

HY

JB

JD

JG

JH

11 14 "285

2 18 "54

11 78 "302

4 516 "109

2"51

3 14 "82

Installation of Floor Closer for Single Action Offset End Panel

Step 1Mark or measureposition for center point of floor closer axle

Step 2Take off side jamb

Step 3Cut out hole for floor closer

Step 4Install floor closer and fix it temporarily in place

Step 5Reinstall side jamb

SHEET 7 OF 13Installation ManualPrivaSEE

Panel #1 Panel #2 Step 2 Step 1

Installation Sequence of Panels

RHT(Sheet 5)

Panel#2

Panel#2

SCALE 1 : 16

Panel#1

Shown on Top of the Elevation of Product Drawing

RHT(Sheet 5)

Step 0 Step 1 Step 2 Step 3

Panel Installation Sequence

Rollers are supplied lose in theaccessory box and need to beinstalled in the field Attention: don't install set screw until roller is finaLly adjusted in height.

SHEET 8 OF 13Installation ManualPrivaSEE

non-entry Single Action Offset End Panel

HH

2 58 "66

HTJD

Set screw to secure axle from turning

Panel-Height adjustment

Single Action Offset End Panel with Floor Closer

Height adjustment screws inside floor closer

Panel Installation for non-entry Single Action Offset End Panel and Single Action Offset End Panel with Floor Closer

SHEET 11 OF 13Installation ManualPrivaSEE

0 PrivaSEE Installation Manual v171 PrivaSEE Installation Manual v19Sheet1Drawing View7Drawing View14Drawing View18Drawing View20Drawing View53Drawing View54Drawing View253Drawing View256Drawing View258Drawing View260Drawing View263Drawing View265Drawing View592Drawing View745Drawing View746Drawing View748Drawing View749Drawing View751Drawing View765Drawing View766

2 PrivaSEE Installation Manual v17Sheet2Drawing View27Detail View û (1 : 4)Drawing View75Drawing View164Drawing View165Detail View EU (1 : 4)Drawing View477Drawing View478Drawing View615Drawing View899Detail View HL (1 : 2)Detail View HM (1 : 2)Drawing View903

3 PrivaSEE Installation Manual v20Sheet3Drawing View30Detail View CH (1 : 4)Drawing View471Drawing View545Detail View FN (1 : 4)Drawing View549Drawing View551

4 PrivaSEE Installation Manual v16Sheet10Drawing View891Detail View JA (1 : 2)

5 PrivaSEE Installation Manual v16Sheet4Drawing View41Drawing View42Detail View T (1 : 3)Detail View U (1 : 3)Drawing View84Detail View AF (1 : 5)Drawing View86Drawing View87Drawing View88Drawing View89Detail View AH (1.5 : 1)Drawing View96Drawing View536Detail View FG (1 : 2)Drawing View693Drawing View903Drawing View904Detail View HT (1 : 4)Drawing View908Drawing View910Drawing View912Detail View HW (2 : 5)Detail View HY (2 : 5)Detail View JA (2 : 5)Drawing View916Drawing View917Drawing View918

6 PrivaSEE Installation Manual v16Sheet5Drawing View57Detail View V (1 : 2)Drawing View59Detail View W (1 : 1.5)Drawing View63Detail View AA (1 : 2)Drawing View65Drawing View67Detail View AC (1 : 1.5)Drawing View69Drawing View71Drawing View72Drawing View73Drawing View74Detail View AG (1 : 1.5)Drawing View93Drawing View94Drawing View162Drawing View270Drawing View479Drawing View480Drawing View481Detail View FK (1 : 4)Detail View FM (1 : 4)Detail View HT (1 : 4)Drawing View546Detail View HU (1 : 4)Drawing View548Drawing View550Drawing View551

7 PrivaSEE Installation Manual v18Sheet10Drawing View894Drawing View898Section View HW-HWDrawing View902Drawing View903Drawing View913Detail View HY (1 : 7)Drawing View919Detail View JB (1 : 7)Drawing View923Detail View JD (1 : 7)Drawing View926Detail View JG (1 : 7)Drawing View928Detail View JH (1 : 7)Drawing View930Drawing View931Drawing View932

8 PrivaSEE Installation Manual v20Sheet6Drawing View100Drawing View101Drawing View104Drawing View105Detail View AJ (1 : 4)Drawing View110Drawing View111Detail View AL (1 : 4)Drawing View113Drawing View114Drawing View116Drawing View121Drawing View277Drawing View684Detail View GU (1 : 4)Detail View GV (1 : 4)Drawing View887

9 PrivaSEE Installation Manual v16Sheet7Drawing View149Detail View BF (1 : 2)Drawing View151Drawing View153Drawing View155Drawing View156Drawing View157Drawing View158Drawing View485Drawing View487Drawing View489Drawing View905Detail View HP (1 : 2)Detail View HR (1 : 2)Drawing View915Section View HW-HWDrawing View920Drawing View924

10 PrivaSEE Installation Manual v16Sheet9Drawing View201Drawing View202Drawing View209Drawing View213Drawing View214Drawing View217Drawing View299Drawing View490Drawing View491Drawing View497Drawing View499Drawing View500Drawing View501Detail View EY (1 : 1)Drawing View504Detail View FA (1 : 2)Detail View FB (1 : 2.5)Detail View FC (1 : 2)Drawing View508Drawing View509Drawing View510Drawing View563Drawing View565Drawing View566Drawing View567Detail View HU (1 : 3)

11 PrivaSEE Installation Manual v17bSheet10Drawing View848Drawing View873Drawing View882Drawing View883Detail View HH (1 : 2)Detail View HJ (1 : 3)Drawing View889Drawing View895Detail View HT (1 : 5)Drawing View906Drawing View907Drawing View910Drawing View912Drawing View923Detail View JD (1 : 5)Detail View JE (1 : 4)Drawing View926Drawing View929Drawing View930

12 PrivaSEE Installation Manual v16Sheet12Drawing View925Drawing View932Detail View HY (2 : 2.5)Drawing View938Detail View JC (2 : 2.5)Detail View JD (2 : 2.5)

13 PrivaSEE Installation Manual v16Sheet11Drawing View766Drawing View767Drawing View769Drawing View774Drawing View910Drawing View911Drawing View913Drawing View914Detail View HU (1 : 2)Detail View HV (3 : 1)Drawing View917