K-73838IN

1243005-IN01-A -1-

13-3/8" (34 cm)

10-1

/16"

(25.5

cm

)

7-7

/8"

(20 c

m)

21-5/8" (55 cm)

14

-3/1

6"

(36 c

m)

17-5/16"(44 cm)

15-3

/4"

(40 c

m)

Ø4"

(10.2

cm

)Ø

2-3

/16"

(5.5

cm

) P-TrapUnit: Inches (cm)

7-1/16" (18 cm)

13-7

/16"

(34

.2 c

m)*

*

12-1

/16"

(30.7

cm

)**

8-1

/8"

(20.7

cm

)**

ROUGHING-IN

Measuring Tape

RECOMMENDED TOOLS AND MATERIALS

Teflon Tape

Silicon Sealant File

Hacksaw Spirit Level 10” Adjustable Wrench

BEFORE YOU BEGIN

WARNING: Risk of personal injury or product damage. Handle with care.

Vitreous China can break or chip if the bolts and nuts are over-tightened, or if the product is handled carelessly.

FOREFRONT

Observe all local plumbing and building codes.

Carefully inspect the new toilet for any damage.

If the In-wall tank is not installed, refer to the manufacturer's instructions before installation.

INSTALLATION INSTRUCTIONSVITREOUS CHINA WALL-HUNG P-TRAP TOILET

K-72835IN-S

ORDERING INFORMATION FOREFRONT

* (Available in “-0 (White) & “-96” (Biscuit)

RECOMMENDED TANKS

NOTES:

· Fixture dimensions are nominal and conform to tolerances as per ASME Standard A112. 19.2M.

· Product illustrations shown are representative only; actual products may vary.

· Kohler reserves the right to make changes in product characteristics, packaging or availability at

any time without notice.

CAUTION : Do not use white cement or high lime-content cement to install this toilet.

The expansion of cement due to rise in temperature may cause the toilet to crack or

be damaged. Kohler is not responsible for any damage due to installation with the use

of cement.

** - indicates WC mounting dimension

11-7

/16"

(29.1

cm

)

14"

(35.5

cm

)

FOREFRONT

Wall-hung Toilet W/QC Seat.........................................K-72835IN-S* Includes Toilet Bowl......................................................K-72838IN* Includes Quiet-close Toilet Seat....................................K-72839IN*

Wall-hung Toilet W/Pureclean.......................................K-77017IN* Includes Toilet Bowl......................................................K-72838IN* Includes Pureclean Bidet Seat.......................................K-96001IN*

Description Inwall Tank Cover/ Face PlateK-4178IN-2-NAHydro Tower 310 In-wall tank 3/6 L

Hydro Tower 310 In-wall tank 3/4.5 L K-4179IN-2-NAHydro Tower 310 In-wall tank 3/6 L Side Inlet

Hydro Tower 310 In-wall tank 2/4 L Side Inlet

K-4178IN-2S-NAK-4179IN-2S-NA

K-4177IN-2**K-8857IN-2**

Hydro Tower 310 In-wall tank 3/4.5 L Side InletK-75595IN-2S-NA

**Indicates finishes:- “CP - Chrome Plating” “MS1 - Satin Chrome” “B04 - White Matt” “B07 - White Matt with gold logo” “AF - French Gold”

KOHLER RECOMMENDED SUPPORTS FOR TOILET INSTALLATION (NOT SUPPLIED)

SKU Description M12 Rack Bolt M16 Rack Bolt Wall Bracket M12 Chair Bracket In Wall Tank with frame

1213309-0 1223947-0 1224238-IN-0 1225108-0 75897IN-NA1213309-1CP-0 1223947-1CP-01213309-1BLM-0 1223947-1BLM-0

SKU Code 75898IN-NA

Cut bolts if needed. File bolt ends.

35mm

in

Inds

Mount the sleeve on the bolts and remove inlet plug.

5Inds

6Slide the inlet pipe into the wall openingsfor water inlet. Test fit the toilet.

7 Remove the toilet. Cut and file the inlet pipeto the proper length by removing excess

8

Inds

13

Mount the toilet on the wall.

14accessories using allen key. Close the installation holes using the caps.

Flush the toilet. Check for leaks. Seal connections if required.

15 Seal around the edges. Do not use cement.

9

Slide the outlet pipe into the wall openings for waste pipe. Test fit the toilet.

Inds

10 11Remove the toilet. Cut and file the outlet length by removing pipe to the proper

12Add silicon sealant in the gasket grooves.

1243005-IN01-A -2-

INSTALLATION GUIDELINE

in

Toll Free 1800 103 2244

Wall Installation Kit***E5534-CP

***Wall Installation kit shown above is supplied with toilet.

Level the toilet and tighten

Note the distance between the wall and the toilet at the location shown.Measure excess length “A” for the inlet pipe.

Note the distance between the wall and the toilet at the location shown. Measure

excess length “B” for the outlet pipe.

Install the accessory kit into the

installation hole of the toilet.

10

Slide the gaskets on the inlet & outlet pipeas shown.

3

length “A”.

excess length “B”.

11695071169504

1046327

1046327-S

Recommended Installation Parts:

Inlet Connection (Not Supplied)

Outlet Connection(Not Supplied)

Recommended supports*** for Toilet installation :

Note:- Dimension A and B (as shown in picture 6 to 10 above) to be adjusted as per specific site requirements

1213309-0/1213309-1CP-0/1213309-1BLM-0/1223947-0/1223947-1CP-0/1223947-1BLM-0

1224238-IN-0 1225108IN-0

{{

M12

M16

75897IN-NA 75898IN-NA