installation instructions for storm drain systemnew zealand-dux industries ltd. phone 0800 367 389....
TRANSCRIPT
IMG0
442R
P im
agri.
com
.au
02/
08
Easy Installation in 4 simple steps
Installation Instructions for Storm Drain System
1. Dig the trench• Form trench for Reln Storm
Drain System allowing for a 50mm bed of packed sand and wide enough for a minimum of 100mm backfill of concrete on each side.
• Allow slope of approximately 30cm to every 20m.
2. Insert End Cap or End Outlet• Join Reln Storm Drain System.
Joins and End Caps may be sealed with silicone. Use Reln End Cap at highest point of Reln Storm Drain Channel. Connect the low end of the Storm Drain Channel to a Rainwater Pit, or, using 90mm PVC pipe use built in Bottom Outlet, or fit an End Outlet to allow water to clear.
• Lay Storm Drain Channel out with 90˚ Corner Piece or Tee Piece connected and End Cap fitted prior to concreting.
3. Snap together lengths• Storm Drain Channel can be
cut to length with a hacksaw, install with grate fitted.
• Protect grate with masking tape during concrete pour.
4. Finish.
• Top of grate must be 2mm below concrete or paver surface.
• Allow 72 hours for concrete to cure before vehicle use or removal of grates.
www.reln.com.au
Reln Pty Ltd. 14B Williamson Road Ingleburn NSW 2565
Phone 1300 137 356 Fax 1300 137 358 Email [email protected]
New Zealand-Dux Industries Ltd. Phone 0800 367 389.
www.reln.com.au
D.I.Y Drainage System
Easy to install!
Storm Drain Technical Details. Length Width Height Weight
Storm Drain with Plastic Grate 1010mm 120mm 129mm 2.3kg
Storm Drain with Stainless Steel Grate 1010mm 120mm 129mm 3.2kg
Storm Drain End Outlet 35mm 120mm 123mm 50gms
Storm Drain 90° Corner 170mm 170mm 127mm 400gms
Designed to withstand 5 tonne vehicle weight without
moving in concrete
Drainage System Components
Slim-line Pit Joiner and 3m Channel& End Outlet 90˚ Corner End Cap Tee Piece 1m Channel Bottom Outlet Channel Options Grate OptionsLeaf Guard
Bottom outlet on the Slim-line Pit or Channel can be cut or drilled to allow more flexibility with paving.
Sizes available: 1 metre and 3 metre lengths. Also available as a Garage Pack which includes 4 x 1 metre lengths with black grates plus a BONUS End Cap and End Outlet.Garage Pack Product Code: 003141
• Coloured grates available in: black, stainless steel, sandstone, terracotta, portland grey, heritage green
• Heavy Duty Grates (Class C Ductile Iron)
• Available in 1m lengths only
• Designed for fast easy connection to Reln Storm Drain.
• When installed the Slim-line Pit looks like part of the Channel.
Product Code: 003430
• Tough, durable & lightweight• Available in 1m or 3m lengths for greater flexibility• Joiner included for 3m ChannelProduct Code: 003301
• Fits 90mm PVC pipe• Easy to install to end of
Channel• PredrilledProduct Code: 003408
• Corner peice connects Channels to make 90 degree corners and T-intersections
• Tough, durable, lightweightProduct Code: 003401
• End Cap slips into Storm Drain at either end of Channel
• Used to seal high end of drain
Product Code: 003407
• The quick and easy way to create a branch line with Channel
Product Code: 003121
• Tough, durable & lightweight
• Available in 1m or 3m lengths for greater flexibility
Product Code: 003101
• Prevents passage of leaves and debris entering stormwater systems and waterways
Product Code: 003410
1 2 3 4 5 6 7 8 9
D.I.Y Drainage System
Pre drilled End Outlet is quicker
to install PVC stormwater pipe.
Bottom outlet can be cut or drilled to allow more flexibility with paving.
Easy clip out grate for cleaning
90° Corner allows left or right hand extension of the
Reln Storm Drain.
Joiner2
3m Channel3
LeafGuard
4
90° Corner6
End Cap7Tee Piece8
1m Channel9
Preformed pipe outlets allow for quick and easy glueing
of ø90mm PVC stormwater pipe
Leaf Guard prevents
leaves from blocking
outlets and pipes.
Slim-line Pit 1
Easy joining
ø90mm PVC Stormwater Pipe
End Outlet5
Designed to withstand 5 tonne vehicle weight without moving in concrete