1

NORTH AMERICAN EDITION

HEADQUARTERS - www.deltalight.com - USA - www.deltalight.us - CANADA - www.deltalight.ca

Installation instruction SPY CLIP HP

Application Ceiling semi recessed mounted

Finishing section to be used with DELTA LIGHT rough-in housing, plasterframe

or mounting kitFor indoor use only

Color FinishW - W = White cilinder - White ceiling plate

W - B = White cilinder - Black ceiling plate

B - B = Black cilinder - Black ceiling plate

Light sourceOne 18W POWERLED WHITE included

Power SupplyListed remote current controled class 2 power supply required (not supplied).

Max 500mA, typical forward voltage 34,4V.

Specification featuresPowder coated aluminum assembly

Pre-installed springs for easy installation

Suitable for dry or damp locations

DimensionsHeight: 111mm = 4”-3/8

Diameter: Ø62mm = Ø2”-7/16

Ceiling Cut out: 51mm = 2”

Required options for non-class 2 power limited circuitsHousing for IC and/or airtight applications

Plasterframe for IC applications

For remodel application414 90 01 MOUNTING KIT FLUSH SPY

Required accessories414 01 00 SPY TUBE

Accessories not supplied (option)413 03 01 HONEYCOMB 50

413 03 02 LINEAR SPREAD LENS 50

413 03 03 SPREAD LENS 50

413 03 04 SOFTENING LENS 50

413 03 05 GLASS SBL

SPY CLIP HP 83033

6 414 341 21 831

= B-B / W-B / W-W

SPY CLIP HP 82733

6 414 341 21 821

= B-B / W-B / W-W

SPY CLIP HP 93033

6 414 341 21 931

= B-B / W-B / W-W

SPY CLIP HP 92733

6 414 341 21 921

= B-B / W-B / W-W

2 = 3000K

3 = 2700K

Color temperature

35mm

1”-3/8

2mm

1/16"

111mm

4”-3/8 Ø62mm

Ø2”7/16

Ø58mm

Ø2”-5/16

355°

90°

1 - Bar hangers standard0 - No bar hangers

1 - 120V2 - 277V3 - 120-277V

Range Installation type

Voltage Mounting Option

202

202

6

6

87 Plate D50

95 ( Flush !nish)

1 - Bar hangers standard

1 - Bar hangers standard

06 - IC Plasterframe S

06 - IC Plasterframe S

00 -

00 -

0

0

Power & Dimming Opening

OR

OR

7 - IC AT Housing S

7 - IC AT Housing S

6

6

202

202

00 -

00 -

87 Plate D50

95 ( Flush !nish)

0

0

1 - Bar hangers standard

1 - Bar hangers standard

1 - Bar hangers standard0 - No bar hangers

1 - 120V2 - 277V3 - 120-277V

Range Installation type

Power & Dimming Opening

Voltage Mounting Option

Conforms to ANSI/UL Std. 2108

Cert. to CAN/CSA Std. 22.2 No. 250.0

ICICAT

Last Update ALLU 19/12/2017

Installation instruction

2

NORTH AMERICAN EDITION

HEADQUARTERS - www.deltalight.com - USA - www.deltalight.us - CANADA - www.deltalight.ca

A

B

A

B

SAVE!

B

A

INSTALLATION LUMINAIRE

SPY CLIP HP

if not installed in a class 2 power limited circuit

ICAT

HOUSING PLASTERFRAME

Not Supplied Rough-in Housing or Plasterframe

Required

Accessories

MOUNTING KIT

1X2X

RED

1

4

5

3

2+ +

- -

+

+

--

1 UNIT

+

+

-

-

i

+ -

+

>1 UNIT

ELECTRICAL CONNECTION

+ +- - -...

6

CAUTION!

CLASS 2 POWER LIMITED CIRCUITS ONLY

ATTENTION!

SEULEMENT POUR RESEAUS CLASS 2,

A PUISSANCE LIMITE

MAX 500mA DC (red/rouge: +, black/noir: -)

IC IC

3

NORTH AMERICAN EDITION

HEADQUARTERS - www.deltalight.com - USA - www.deltalight.us - CANADA - www.deltalight.ca

Installation instruction

INSTALLATION LUMINAIRE

SPY CLIP HP

8 9

on

o�

10

355°

90

- Use only power supplies that are certi�ed according to the applicable IEC or UL safety standards.

- Use only SELV power supplies.

- Check the ratings of the power supply with those of the luminaire.

The maximum current rating must be taken into account.

The indicated typical voltage must not be used to select a constant voltage power supply but is indented to used

to select a constant current power supply that is able to cover that typical voltage.

- Take appropriate ESD measures. Avoid touching bare conductors.

- Leds or led luminaires that require a current controlled power supply must never be connected in parallel.

- Leds can be damaged by the contact with certain chemicals or chemical gasses.

Therefore led domes or led engines should never be cleaned with chemical substances.

The following substances have proven to have a negative in�uence on the performance and

must not be used in the direct environment of a led luminaire.

Methyl acetate or ethyl acetate (i.e., nail polish remover)

Cyanoacrylates (i.e., “Superglue”)

Glycol ethers (including Radio Shack® Precision Electronics Cleaner - dipropylene glycol monomethyl ether)

Formaldehyde or butadiene (including Ashland PLIOBOND® adhesive)

Dymax 984-LVUF conformal coating

Loctite Sumo Glue

Gorilla Glue

Bleach, Bleach-containing cleaners, sprays

Loctite 384 adhesive

Loctite 7387 activator

Loctite 242 threadlocker

- Remove insulation and/or provide su�cient ventilation so that the indicated max Tc is not surpassed.

- Leds are susceptible to switching transients. Therefore switching must be done in the primary circuit

of the power supply.

- DELTA LIGHT recommands to use the power supplies that are indicated in the Lighting Bible.

- Respect polarity

- Don’t test LED luminaires one by one on a powersupply that is switched on.

DO NOT TOUCH OR CLEAN THE LED ARRAY!

!

ACCESSORIES

2 3Used as

replacement

lens

1

HONEYCOMB 50

413 03 01

LINEAR SPREAD LENS 50

413 03 02

SPREAD LENS 50

413 03 03

SOFTENING LENS 50

413 03 04

GLASS SBL 50

413 03 05

SPY TUBE

414 01 00

Click!!

FLAT SIDE

ROUGH SIDE

SPY TUBE

414 01 00

Click!!

NO SECONDARY SWITCHING

AC DC

AC DC

ATTENTION

OBSERVE PRECAUTIONS FOR

HANDLING ELECTROSTATIC

DISCHARGE SENSITIVE

DEVICES