installation installation instructions instructions … · 2014-11-17 · installation instructions...
TRANSCRIPT
INSTALLATION INSTRUCTIONS
HAIL GUARD
1HG0413
INSTALLATION
INSTRUCTIONS
SEPTEMBER 27, 2010 652348-UAI-A-0910
The Hail Guard ZF072/ZS-A6/JA6ZF is designed to prevent damage to the condenser coil of the unit.The following parts are required:
1 ea. - Small Side Hail Guard1 ea. - Top Panel2 ea. - Hood Sides1 ea. - Expanded Screen
1 ea. - Medium Side Hail Guard1 ea. - Top Panel2 ea. - Hood Sides1 ea. - Expanded Screen
1 ea. - Large Front Hail Guard1 ea. - Top Panel2 ea. - Hood Sides1 ea. - Expanded Screen
1 ea. - Hardware Package18 ea. - #10- 16 x ½ Screw18 ea. - #10- 16 x ½ TEC Screw1 ea. - Installation Instruction
29
MEDIUM SIDE HAIL GUARD
LARGE FRONT HAIL GUARD
Step 1:Check for correct model number and number of parts above:Step 2:Take one side panel of small side hail guard and align hol es with corner post of unit and secure. Repeat with opposite sidepanel.Step 3:Open the clips on side panels and slide expanded screen between flange on side panel and clips. Then close the clips tohold screen.Step 4:Then take top panel and align holes with side panels and secure.Step 5:Repeat steps 2 thru 4 with remaining large front hail guard and medium side hail guard.
HOOD SIDES
EXPANDEDSCREEN
TOP PANEL
27 38
36 78
17 38
SMALL SIDE HAIL GUARD
SCREEN CLIPS