installation guide of K-TAG 7.003 KTM100 2.13 software

http://vipprogrammer.blogs

pot.com/2015/06/how-to-i

nstall-k-tag-7003-ktm100-k.

html

China Clone KTAG 7.003 firmware has newly launched, New2.13 KTM100 software is the

replacement of 2.13 K-Suite which brings brand-new interface and makes easier operation. Here,

vipprogrammer.com share the installation guide of K-TAG 7.003 K-Suite 2.13 software, this

step-by-step instruction guide will help you.

Software: KTM100 V2.13 (better than Ksuite software)

Firmware: V7.003

Language: English, Italian, Portuguese

NOTE: KTM100 software can only be work with KTAG firmware V7.003

New KATG KTM100 V2.13 Firmware 7.003 new added feature:

1) New add BMW F chassis petrol and Mercedes-Benz W222 models

2) Software is much easier to use and is very stable. After you connect the car, just choose the

large type, KTM100 will recognize the ECU detailed type via ID automatically.

Disable both local network and wireless connection (Very important!!!)

1). Install KTAG KTM100 V2.13 setup:

Open KTM100 setup in the CD software on My computer

Open KTM100 file, then open KTM100 English file (1st file).

Open KTAG KTM100 setup and install Microsoft Visual C++2005.

Install Adobe Reader 7.0.8.

Confirm Setup settings and copy file to Local Disk C automatically.

2). Install K-tag KTM100 V2.13 driver

Open Driver folder on KTM100 folder and install it.

Select Driver language.

Click Next.

Click Next in Read Me File window

Press Next to start installation.

Driver installation is completed, press Finish button.

3) Connect ktag 2.13 with ktag firmware V7.003 from obd2tuning.com.

Connect the K-TAG ECU programmer with vehicle and wait the system to find the hardware driver

and install it.

Open My Computer>>Manager>>Device Manager>>Universal Serial Bus

controllers>>DimSport-New Trasdata Device to check and make sure there is good

communication between K-tag and computer.

4) Run obd2tuning.com Ktag KTM100 V2.13 software.

Open KTM100 software on the desktop.

Press OK when system display an message “Error during the server .connection” to continue.

Select Options tab to choose the language you want.

Check vehicle and ECU type list on Info Plugins tab.

Select certain ECU brand and tick Checksum Info button on the bottom, another window will

bring the checksum information.

Select Interface tab, and select vehicle make, model, engine and year information. Here is

example of program VW Bosch EDC17 ECU. Then press ID button, confirm you have selected the

correct connection mode.

Then the ECU information will fully displayed on the REPORT column.

Select read/write ECU via Micro, EEPROM etc on OPERATION part, click on Read.

After complete read ECU, save your file to a certain folder.

Check ECU plugin and tick Manual icon to view detail plugin.