installation guide - midland valley · pdf filemove link for petrel v2014.1..... 13 system...
TRANSCRIPT
Installation Guide
(Version 2014.1)
Midland Valley Exploration Ltd
144 West George Street
Glasgow G2 2HG United Kingdom
Tel: +44 (0) 141 3322681
Fax: +44 (0) 141 3326792 www.mve.com
Table of Contents
1. Move2014 Software and Supporting Documentation ............................................... 3
Contents: .................................................................................................................. 3
2. System Requirements ............................................................................................. 4
Operating Systems ..................................................................................................... 4
Graphics Card ............................................................................................................ 4
Hardware .................................................................................................................. 5
Workstation/Desktop .................................................................................................. 5
Laptop/Notebook ........................................................................................................ 5
Screen/Monitor .......................................................................................................... 5
3. Installing Move ....................................................................................................... 6
Installing on Windows ................................................................................................. 6
License Agreement ..................................................................................................... 6
Installation Folder ...................................................................................................... 6
License Manager Components ...................................................................................... 7
Uninstalling Move on Windows ..................................................................................... 7
Uninstalling Licensing Service on Windows .................................................................... 7
Using Windows Remote Desktop .................................................................................. 8
Installing on Linux ...................................................................................................... 9
Extracting the software ............................................................................................... 9
Running the setup scripts ............................................................................................ 9
License Agreement ................................................................................................... 10
License Manager Components .................................................................................... 10
Uninstalling Move on Linux ........................................................................................ 10
Uninstalling Licensing Service on Linux ....................................................................... 10
Configuring OpenGL on Linux ..................................................................................... 10
Installing on MacOS X ............................................................................................... 11
License Manager Component ..................................................................................... 11
Uninstalling Move on MacOS X ................................................................................... 11
4. Move licensing ....................................................................................................... 12
5. Move Link for Petrel v2014.1 ................................................................................. 13
System Requirements ............................................................................................... 13
Software ................................................................................................................. 13
Operating System .................................................................................................... 13
Installation .............................................................................................................. 13
6. Move Link for OpenWorks R5000........................................................................... 15
Introduction............................................................................................................. 15
Software ................................................................................................................. 15
Operating System .................................................................................................... 15
Installation (client) ................................................................................................... 15
7. Contacting Midland Valley ..................................................................................... 17
Midland Valley Move2014.1 Installation Guide
3
1. Move2014 Software and Supporting
Documentation
Contents:
Move installer
MoveViewer installer
FieldMove installer
Midland Valley Licence Manager (FLEXnet 11.1) software
Move Link for Petrel installer
Move2014 Software Installers
Move2014.1.0/Windows64 Installers for Windows (64-bit)
Move2014.1.0/Linux64 Archive for Linux (64-bit)
Move2014.1.0/Mac64 Installers for Mac (64-bit)
FieldMove2014 Software Installers
Move2014.1.0/Windows64 Installers for Windows (64-bit)
Move2014.1.0/Mac64 Installers for Mac (64-bit)
MoveViewer 2014 Software Installers
Move2014.1.0/Windows64 Installers for Windows (64-bit)
Move2014.1.0/Linux64 Archive for Linux (64-bit)
Move2014.1.0/Mac64 Installers for Mac (64-bit)
License Manager Software
LicenseManager/FLEXnet11.1/Windows64 Licence Manager for Windows (64-bit)
LicenseManager/FLEXnet11.1/Linux64 Licence Manager for Linux (64-bit)
LicenseManager/FLEXnet11.1/Mac64 Licence Manager for Mac (64-bit) LicenseManager/FLEXnet11.1/docs License Manager Documentation
Move2014.1 documentation
The following documents are provided with Move2014 and also can be found in the Client section of our website (www.mve.com/clients).
Move2014 Release Notes
Move2014 Installation Guide
Move2014 Licensing Guide
Move2014 Tutorials
MoveViewer 2014 Installation Guide
FieldMove2014 Installation Guide
Midland Valley Move2014.1 Installation Guide
4
2. System Requirements
Operating Systems
Please check to ensure you have at least the minimum specification before installing:
Windows: 64-bit versions of Windows Vista, Windows 7 or Windows 8 Windows requires .NET Framework 4.0 or higher.
Recommend Windows 7 64-bit, SP1, Enterprise or Ultimate editions.
Linux: Linux Red Hat Enterprise 5 and 6 (64-bit only).
Move may run on other distributions of Linux however, these have not been tested. For optimal video performance with OpenGL when using an NVIDIA video card under Linux, it is recommended that you use the accelerated drivers provided by NVIDIA on their website www.nvidia.com.
Mac: OS X 10.7 and up (64-bit only).
Using Move in a virtual machine (with Mac OSX as guest) is not supported.
Graphics Card
Move is a graphics intensive application and takes advantage of modern hardware GPUs in order to speed up 3D rendering. In some algorithmic operations Move also offloads parallel operations to the GPU to deliver faster computational results. The more memory on the graphics card the better Move will handle larger DEM and Image/Seismic data.
Graphics Card requirements (Notebook or Workstation):
1GB of RAM
Graphics card drivers fully up to date
Run pixel shader 2 or later
Be OpenGL compatible
Workstation Graphics Card Recommended:
NVIDIA with 2GB RAM
Workstation Graphics Card Preferred:
NVIDIA with > 2GB RAM - Quadro 6000, K5000, 4000, 2000
Notebook Graphics Card Recommended:
NVIDIA with 1GB RAM
5
Notebook Graphics Card Preferred:
NVIDIA with > 2GB RAM - Quadro M series, NVIDIA Geforce GTX/GT M series
Move will take advantage of standard GPU processing on the graphics card for 3D rendering. The Move Sediment Modelling module will optionally run a CUDA GPU version for maximum speed
depending on the hardware available. See the Sediment Modelling section in the Release Notes for further information.
Hardware
The following list of is provided as a general guide only. If your system configuration is different
and you are unsure of its capability then please email us: [email protected] with your system
details for further information. The hardware requirements greatly depend on the size of data sets you are using. If you are working with large data sets and utilising Move applications simultaneously then we would strongly suggest the following recommendations.
Workstation/Desktop
For example, Dell Precision T7610/T5610/T3610;Apple iMac, Apple Mac Pro.
Specification Recommended Minimum Recommended Ideal
CPU Single 2.0 GHz
Dual core CPU
One or Two 2.5+ GHz or faster CPUs
Each CPU Dual/Quad/Six-core
Memory 4 GB 8-32GB+
Laptop/Notebook
For example Dell Precision M3800 15”, M4800 15”, M6800 17”; Apple Macbook Pro 15”.
Specification Recommended Minimum Recommended Ideal
CPU 1.8 GHz Dual-core CPU 1.8 GHz+ Dual/Quad/Six core CPU
Memory 4 GB 4-16 GB
Screen/Monitor
Minimum screen resolution is a single monitor/screen with 1280x1024 pixels.
Move is a graphics intensive application supporting multiple simultaneous views of your data model, and we recommend as much screen space as you can afford in order to maximise your
experience and attention to detail.
Move will support dual monitors which are recommended at 24” in size and above.
Move supports the Macbook Pro Retina display, which is recommended.
Midland Valley Move2014.1 Installation Guide
6
3. Installing Move
Windows, Linux and Mac have different installation instructions. Please refer to the
appropriate section below.
Installing on Windows
We recommend that you should be a power/administrator user on Windows to install or
with UAC elevated to administrator to install on Windows Vista and Windows 7.
To begin the installation process you must browse to the installer file, for example:
USB-Drive:\Move2014.1\Windows64\move_2014_1_windows_64-bit.exe
License Agreement
To continue with installation please accept the terms of the license agreement and click
Next.
Installation Folder
Select the folder in which you wish to install Move. You may select your own location by
clicking Choose or by typing the explicit location in the input box. You may accept the
default location which is C:\Program Files\Midland Valley\Move2014.1
7
License Manager Components
The Move installer will install a FLEXnet License Manager Windows Service as part of the
post-install process. This service MUST be installed. If you wish to run Move from a
network drive location, or copy/script a custom Move set-up, then please contact
Midland Valley for further instructions. Upon successful installation you should see
something like this in the Windows Services via the Administration Tool:
Uninstalling Move on Windows
Please use the Control Panel to uninstall Move.
Uninstalling Licensing Service on Windows
Upon successful installation you should see something like this in the Windows Services
via the Administration Tool.
You can remove the Windows Service using the above tool.
Alternatively you can remove the FLEXnet service via a Command Console:
C:\ sc delete "FLEXnet Licensing Service 64"
C:\ sc delete "FLEXnet Licensing Service"
Midland Valley Move2014.1 Installation Guide
8
Using Windows Remote Desktop
When connecting to a remote system using Microsoft’s Remote Desktop Services you
may experience issues when using larger models. This is due to limitations with the
software OpenGL driver that is used when using the remote connection. There are
several ways to work around such issues:
Use another remote display application that uses the hardware capabilities of the host
machine.
Start Move on the host machine BEFORE connecting to it. This requires physical access
to the host system.
Use the alternate software OpenGL drivers provided with Move. These are located in the
bin/mesa3d folder inside the location where Move was installed. When Move senses that
it is running remotely then it will prompt the user that the software drivers are being
copied into the bin folder and being utilised.
9
Installing on Linux
We recommend you should have root permission or be the root user on Linux to install.
Installing Move on Linux is a straight forward process of extracting the software from the
archive and running a script which will prompt for required input at the appropriate time.
The software can be installed anywhere, the following instructions assume it will be
installed in /opt/MVE.
Extracting the software
Move is bundled in compressed tar archive. To extract the software, follow these steps:
1. Go to destination directory:
prompt# mkdir -p /opt/MVE ; cd /opt/MVE
2. Copy tgz file:
prompt# cp USB_Drive/Move2014.1/Linux64/ move_2014.1_linux_66-
bit.tgz .
3. Extract archive
prompt# tar zxf move_2014.1_linux_64-bit.tgz
This will create a Move2014.1 folder containing the software.
Running the setup scripts
You now need to run the setup script which will complete the installation process.
1. Go to license_bin_utils directory:
prompt# cd /opt/MVE/Move2014.1/license
2. Run FLEXnet License Service set-up script
prompt# ./install_fnp.sh
3. Go to bin directory:
prompt# cd /opt/MVE/Move2014.1/bin
4. Run Move set-up script
prompt# ./setup.sh
Do you wish to install Move in '/opt/MVE/Move2014.1/bin' [Y/n]?
Do accept the terms of the license agreement [Y/n/v]?
Do you wish to install the Move tutorials [Y/n]?
Do you wish to clean up the intermediate files [Y/n]?
5. As shown above, you will be prompted for various information. The default
answer is shown in upper case; hit the Return key to accept it. Otherwise, type y
or n and hit the Return key to accept it.
Confirm location
Intermediary files (archives containing examples) can be removed to free up
disk space. It may however be useful to keep them as end users may wish to
install local copies elsewhere.
Midland Valley Move2014.1 Installation Guide
10
6. Once the setup script completes, it will display the installation log (saved in
/opt/MVE/Move2014.1/install.log). Any errors will be saved in that file.
7. To start Move, please use the ‘move’ script generated during the installation (do
not run the Move application directly).
prompt# /opt/MVE/Move2014.1/bin/move
License Agreement
To continue with installation accept the terms of the license agreement and click Next.
License Manager Components
The process outlined above will install a FLEXnet License Manager Service as part of the
pre-install process –using the setup_fnp.sh script. This service MUST be installed. If
you wish to run Move from a network location, or script a custom Move set-up, then
please contact Midland Valley for further instructions.
Uninstalling Move on Linux
Remove the entire installation directory using the following command:
prompt# /bin/rm -rf /opt/MVE/Move2014.1
Uninstalling Licensing Service on Linux
Remove the entire installation directory using the following command depending on 32-
bit or 64-bit:
prompt# /bin/rm –rf /usr/local/share/FNP/service64/11.11.0 OR
prompt# /bin/rm –rf /usr/local/share/FNP/service/11.11.0
Configuring OpenGL on Linux
On systems using nVidia Quadro 4* series cards, the drive may need to be configured to
disable VBlank and flipping. As illustrated below, open nvidia-settings application and
make sure both check boxes are NOT ticked.
11
Installing on MacOS X
MacOS distribution comes in three separate DMG archives. To install any one:
Double click on the dmg file in Finder,
Accept the terms of the licensing agreement,
Drag and Drop the application in the new window to the /Applications folder.
License Manager Component
Move will require license configuration after first launch. See details in the Move2014.1 Licensing Guide. If set it up is required manually, the install_fnp.sh script can be
found in the DMG inside the Utilities/license folder.
Uninstalling Move on MacOS X
Drag and drop the Move application from the /Applications folder into the Trash.
Midland Valley Move2014.1 Installation Guide
12
4. Move licensing
Please refer to the Move2014.1 Licensing Guide which can be found on the release
USB package and in the Client section of www.mve.com.
Midland Valley Move2014.1 Installation Guide
13
5. Move Link for Petrel v2014.1
The Move Link for Petrel provides a means for Petrel* users to share and transfer data
with Midland Valley's Move product.
Once installed, the Link allows the Petrel user to specify objects within the input tree to
send across to the Move application of the Move Suite. Once in Move, it is then possible
to perform model building, editing and analysis or utilise functionality within the
modelling modules to perform restoration, validation, balancing, geomechanical
modelling, fracture modelling and sediment modelling on the transferred objects (if
licenses for these modules have been purchased and are available).
*Mark of Schlumberger
System Requirements
Software
To use the Move Link for Petrel (version 2014.1), users are required to have a valid
licence of:
Midland Valley’s Move application 2014.1
Schlumberger’s Petrel seismic to simulation software version 2013.x or 2012.x
Move Link for Petrel version 2014.1 from Midland Valley. For clarification on
compatibility please email [email protected].
Operating System
Petrel is a Windows only product and therefore the Move Link for Petrel will only be
available where all products are running on Windows. See the Move system
requirements and the Petrel software system requirements for details.
Installation
As of Petrel 2011, Move Link for Petrel is installed via the Ocean Plugin manager.
To install for Petrel 2013:
Select Ocean Plugin Manager from the help menu.
Select Install plugin.
Browse to MoveLink.pip from the installation disk.
Close down Petrel.
When Petrel is restarted, the Move Link will be visible in the Processes pane.
Midland Valley Move2014.1 Installation Guide
14
It is recommended that the plugin is installed using administrator privileges.
Move Version Petrel Version Move Link for Petrel Version (via pip or msi)
2014.1 (64-bit) 2013.x (64-bit) Move_2014.1_link_for_Petrel_2013_64-bit
2014.1 (64-bit) 2012.x (64-bit) Move_2014.1_link_for_Petrel_2012_64-bit
Midland Valley Move2014.1 Installation Guide
15
6. Move Link for OpenWorks R5000
Introduction
The Move Link for OpenWorks R5000 provides a means for Landmark OpenWorks users
to share and transfer data with Midland Valley's Move Application of the Move Suite.
The Link allows the Move user to directly import objects within an OpenWorks R5000
database via the input tree to send them across to Move. Once in Move, it is then
possible to perform model building, editing and analysis or utilise functionality within the
modelling modules to perform restoration, validation, balancing, geomechanical
modelling, fracture modelling and sediment modelling on the transferred objects (if
licenses for these modules have been purchased and are available).
Software
To use the Move Link for OpenWorks R5000, users are required to have a licence of:
Move Link for OpenWorks R5000 software from Midland Valley.
Move software from version Move2014.1 from Midland Valley.
Linux - Landmark OpenWorks software from version 5000.8.3.0 back.
Windows - Landmark OpenWorks software from version 5000.8.3.0 back.
Oracle software version 11g onwards.
For clarification on compatibility please email [email protected].
Operating System
Please check to ensure you have at least the minimum specification before installing:
Windows: Microsoft Windows Vista, Windows 7 (64-bit).
Linux: Linux Red Hat Enterprise 5 and 6 (64-bit).
Installation (client)
The Link will work whether running Move from the same machine as OpenWorks is
installed on or alternatively from a client machine on the network that can see the
OpenWorks and Oracle installations.
Linux Move clients should ensure that Oracle and OpenWorks installations are on your
PATH and LD_LIBRARY_PATH and visible on the network. Optionally on Linux you can
install a local client of Oracle software.
Windows clients MUST install Oracle client and OpenWorks client software before you run
Move. See the installation guides from these products for more information. Midland
Midland Valley Move2014.1 Installation Guide
16
Valley do not supply Oracle or Landmark OpenWorks clients; these can be obtained as
part of your own OpenWorks installation - contact your own local OpenWorks
administrator.
Some environment variables that need to be set or will help set-up include:
OWHOME, OW_ORACLE_USER OW_HOME_DIR
Midland Valley Move2014.1 Installation Guide
17
7. Contacting Midland Valley
Support Email address
Licensing & Technical [email protected]
Geological [email protected]
Additional Licences [email protected]
Contact Details
Midland Valley Exploration Ltd +44 (0) 141 332 2681
144 West George Street +44 (0) 141 332 6792
Glasgow
G2 2HG [email protected]
UNITED KINGDOM www.mve.com
Copyright © 2014 Midland Valley
Move, 2DMove, 3DMove, FieldMove and MoveViewer are either registered trademarks or
trademarks of Midland Valley Exploration Ltd.
Petrel, *Mark of Schlumberger