installation filtek system overview v2
TRANSCRIPT
General Information Sheet:
Typical installation - Filtek system
GeneralThis sheet does NOT serve as an installation manual but rather as a high level overview of atypical approved installation. Each installation may differ due to space constraints and varyingcanopy designs.
*NOTE: Once a system has been approved for high volume deployment exact hose lengths forboth the fuel and oil canisters will be provided.
Superior Filtration Solutions
For detailed installation instructionsPlease request or download: ‘Installation Manual-Filtek System.PDF’
Typical installation overview
Fuel Canister Oil Canister
System mountingBracket.Mounts both the canisters and the FAD.
Filtek Auto-oil dispenser (FAD)
Bracket must allow for height adjustment to correct sump level.
Adjust to correct sump level via visible window.
Fuel in/out connections to pump and OEM filter.
Oil in/out connections from sender unit and return to sump.
Ball valve for ease in removing used oil when service is due.
FAD hose must NOT be higher than sump level – always equal too or below.
System Mounting Bracket
More concepts…
FAD – sump level adjustment slots.
Filtek Industries LimitedEbène House, 3rd Floor, 33 Cybercity,Ebène, Mauritius.
Website URL: www.filtek.coContact email: [email protected] cell : +27 72 059 9363
+27 83 451 3647
Canisters