installation and service manual · 2018. 11. 29. · ki-60475 ta 25°c glass surface temp ki-60475...

2
TOOL 4 1 2 3 OK YES NO NO FRONT SURFACE RING KI-60465 FRONT RECESS RING KI-60475 Ta 25°c Glass surface temp KI-60475 = 30°c Ta 25°c Glass surface temp KI-60465 = 30°c Drive over 2,500kg. at max. 50km/h. IP67 IK10 CLASS I 0.5m INSTALLATION AND SERVICE MANUAL Product drawing (dimensions) For Installation of Kios Inground uplight square 220mm. and square 216mm. Model. KI-60465 and KI-60475 L i g m a n L i g h t i n g Technical amendments and modifications techniques reserved. LIGMAN standard products are supplied with the control gear 220-240V 50/60Hz. The control gear for other voltages and frequencies is available upon request, please consult us for more details. LIGMAN luminaires are designed to conform IEC 60598 2-13 standard. FM-TS-13-1/13-03-2561/REV.4 M KI-60465/30/09/16/REV.3 1/2 Europe Headquarters Ligman Europe s.r.o. VGP Park Usti nad Labem, P 2 Prestanov 113 403 17 Prestanov Czech Republic Tel. +420 608 740 504 | [email protected] www.ligman.com Ligman Ltd Regus House, Victory Way Crossways Business Park Dartford DA2 6QD Tel. 0800 975 0622 [email protected] Thailand Headquarters Ligman Lighting Co., Ltd. 17/2 Moo 4, Monthong, Bangnampreaw Chachoengsao 24150 Thailand Tel : +66 (2) 7339140 [email protected]

Upload: others

Post on 27-Feb-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: INSTALLATION AND SERVICE MANUAL · 2018. 11. 29. · KI-60475 Ta 25°c Glass surface temp KI-60475 = 30°c Ta 25°c Glass surface temp KI-60465 = 30°c Drive over 2,500kg. at max

TOOL

4

1 2 3

OKYES

NO NO

FRONT SURFACE RINGKI-60465

FRONT RECESS RINGKI-60475

Ta 25°cGlass surface tempKI-60475 = 30°c

Ta 25°cGlass surface tempKI-60465 = 30°c

Drive over 2,500kg. at max. 50km/h.IP67 IK10 CLASS I 0.5m

INSTALLATION AND SERVICE MANUAL

Product drawing (dimensions)

For Installation of Kios Inground uplight square 220mm. and square 216mm.Model. KI-60465 and KI-60475

L i g m a n L i g h t i n gTechnical amendments and modifications techniques reserved.

■ LIGMAN standard products are supplied with the control gear 220-240V 50/60Hz. The control gear for other voltages and frequencies is available upon request, please consult us for more details.■ LIGMAN luminaires are designed to conform IEC 60598 2-13 standard.

FM-TS-13-1/13-03-2561/REV.4M KI-60465/30/09/16/REV.3

1/2

Europe HeadquartersLigman Europe s.r.o.VGP Park Usti nad Labem, P 2Prestanov 113403 17 PrestanovCzech RepublicTel. +420 608 740 504 | [email protected]

www.ligman.com

Ligman LtdRegus House, Victory WayCrossways Business ParkDartford DA2 6QDTel. 0800 975 [email protected]

Thailand HeadquartersLigman Lighting Co., Ltd.17/2 Moo 4, Monthong, BangnampreawChachoengsao 24150 ThailandTel : +66 (2) [email protected]

Page 2: INSTALLATION AND SERVICE MANUAL · 2018. 11. 29. · KI-60475 Ta 25°c Glass surface temp KI-60475 = 30°c Ta 25°c Glass surface temp KI-60465 = 30°c Drive over 2,500kg. at max

7 8 9

10 11 12

L N

14

4 5 6Cable ODMin 6mm.Max 12mm.

13

6

20 30

CABLE SIZE : 3x1.0mm ²

Push

Torque:6.25Nm.

Torque :3.0Nm.Torque :2.0Nm. Torque :4.3Nm.

Torque :4.3Nm.

Note : Brush finish stainless steel products requirement to wipe the product periodically with a light oil (WD40 or equivalent) to remove any staining.

M KI-60465/30/09/16/REV.32/2