INNOVATIVE PLASTICS Sundance Supply, LLC 888-775-6176

https://www.sundancesupply.com

saBIc’s sPecIaLty FILm & sheet BusIness oFFers hIGh quaLIty, enGIneered thermoPLastIc soLId and muLtIWaLL sheet Products across a WIde varIety oF IndustrIes, ranGInG From BuILdInG and constructIon, LamInatIon to transPortatIon.

sPecIaLty FILm & sheet

certification by providing natural light, optimizing energy performance, and utilizing recycled content.

offering superb energy efficiency, 1000-mm-width LeXan™ thermocLIck™ 50-mm sheet delivers a thermal insulation u-value that can reduce energy consumption up to 17 percent vs. high-return, double-pane glass glazing. LeXan™ soLar controL™ Ir and thermocLear softLite* light-diffusing multiwall sheet products reduce build-up of interior heat while increasing natural light transmission. the company’s continuing investment in these and other environmentally responsible solutions helps customers create the next generation of sustainable designs.

saBIc’s specialty Film & sheet business offers a robust, fast-growing portfolio of LeXan™ thermocLear™ polycarbonate (Pc) sheet systems, which are driving sustainable building designs through energy conservation and improved working/living environments. these lightweight, flame-retardant materials, available in monolithic and multiwall configurations, are used worldwide for roofing, cladding and glazing massive stadiums, hotels, and other impressive structures. saBIc’s LeXan™ thermocLear™ sheet products can help architects and designers succeed in the lucrative green building space and have potential to contribute to Leed (Leadership in energy and environmental design)

the sustainable building movement is a rapidly accelerating, $12-billion sector in which saBIc’s advanced materials technologies are playing an increasingly critical role. the company’s LeXan™ thermocLear™ sheet materials are a natural fit for sustainable design because they help our customers meet global environmental and safety standards and facilitate awe-inspiring green architectural design. With a huge array of colors, finishes, sizes and configurations, our sheet products open virtually limitless design possibilities.

WInnInG Leed credIts WIth LeXan™ sheet

sustaInaBLe sItes: credit 8 – Light Pollution reduction (1 point): Lexan thermoclear softLite sheet, a new addition to saBIc Innovative Plastics’ portfolio, offers light-diffusing characteristics that prevent direct-beam illumination from leaving the building interior. also, opaque Lexan sheet and Lexan thermoclear multiwall sheet can block up to 100 percent of light pollution.  enerGy & atmosPhere: credit 1 – optimize energy Performance (1 point each, up to 10 points): the X-wall structure of the saBIc Innovative Plastics’ Lexan thermoclear sheet creates additional air pockets between the exterior and interior of the building while enhancing strength and stiffness. this configuration helps the material deliver energy efficiency year round while transmitting diffused daylight.  

the Leed program is the most popular standard for green building and its silver, gold and platinum certifications are highly prized. Incorporating saBIc Innovative Plastics’ Lexan thermoclear sheet glazing, roofing and cladding solutions into the design may help builders win Leed credits (points counting toward certification) in several categories.

materIaLs & resources: credits 4.1 and 4.2 – recycled content (1 point each): Lexan sheet may utilize different percentages of pre-consumer recycled content that can help builders to obtain these credits.  Indoor envIronmentaL quaLIty: credit 6.2 – controllability of systems (1 point): Lexan solar control Ir sheet (monolithic and multiwall versions) can help reduce interior heat build-up by 25 percent, while increasing light transmission by as much as 60 percent compared to other glazing products. credits 8.1 and 8.2 – daylight & views (1 point each): Lexan sheet for walls, curtainwalls and window replacement systems can easily integrate fixed and operable windows glazed with Pc sheet for connection to the outdoors.

enhanced saFety and PerFormance

For safety, Lexan thermoclick 40 mm sheet system and thermoclear sheet products1 made in north america comply with cc1 (astm d635) and class a (astm e-84) smoke and fire ratings and are impact-resistant. they are available with uv-resistant coatings to protect people from ultraviolet radiation. another important benefit of X-structure Lexan thermoclear sheet is its light weight, which makes it less expensive to transport and easier to handle and install compared to heavy glass panes. also, the material can be used with a lighter supporting steel framework than glass requires, which can reduce material and shipping costs.  Both sides of Lexan thermoclear sheet are treated with proprietary uv protection against outdoor weathering. In accelerated 4,000-hour weathering tests (dIn53387 / astm G26) – comparable to 10 years of outdoor exposure in moderate climate conditions – results obtained by saBIc Innovative Plastics demonstrate Lexan thermoclear sheet’s superior ability to maintain color, light transmission and impact strength vs. competitive products. Lexan thermoclear sheet offers different warranties to fulfill different needs: a 10-year limited written warranty, Lexan thermoclear sheet, Plus grade that provides superior performance with a yellowing index of two and light transmission; XP grade offer a 15-year limited written warranty against discoloration, loss of light transmission and loss of impact strength due to weathering.

WIde choIce oF sPecIaL ProPertIes In addition to Lexan sheet’s excellent resistance to impact, uv and flame, select monolithic grades offer anti-graffiti properties or compliance with building codes established by the International conference of Building officials (IcBo). to provide different visual effects, the Lexan thermoclear sheet product line is available in clear, opal white, solar control blue, bronze, gray, two green shades as well as a variety of other colors. a variety of specialty coatings from saBIc Innovative Plastics are also available. they include easy clean grade with a proprietary technology that allows Lexan sheet to be easily cleaned with rainwater, resulting in significant cost savings. Lexan thermoclear dripgard* sheet with a specially developed hydrophilic coating on the inner surface prevents dripping from condensation build-up in greenhouses.  applications for Lexan thermoclear sheet include building cladding, architectural interiors, partition walls, commercial-, residential- and stadium roof glazing, swimming pool enclosures, greenhouses and sunrooms.

SuStainable SiteS Possible points 26

Prereq 1 Construction Activity Pollution Prevention required

credit 1 Site Selection 1

credit 2 Development Density & Community Connectivity 5

credit 3 Brownfield Redevelopment 1

credit 4 Alternative Transportation 1 to 12

credit 5 Site Development 1 to 2

credit 6 Stormwater Design 1 to 2

credit 7.1 Heat Island Effect, Non-Roof 1

credit 7.2 Heat Island Effect, Roof 1

credit 8 Light Pollution Reduction 1

energy & atmoSPhere Possible points 35

Prereq 1 Fundamental Commissioning of the Building Energy Systems required

Prereq 2 Minimum Energy Performance required

Prereq 3 Fundamental Refrigerant Management required

credit 1 Optimize Energy Performance 1 to 19

12% New Building or 8% Existing Building Renovations 1

14% New Building or 10% Existing Building Renovations 1

16% New Building or 12% Existing Building Renovations 1

18% New Building or 14% Existing Building Renovations 1

20% New Building or 16% Existing Building Renovations 1

22% New Building or 18% Existing Building Renovations 1

24% New Building or 20% Existing Building Renovations 1

26% New Building or 22% Existing Building Renovations 1

28% New Building or 24% Existing Building Renovations 1

30% New Building or 26% Existing Building Renovations 1

32% New Building or 28% Existing Building Renovations 1

34% New Building or 30% Existing Building Renovations 1

36% New Building or 32% Existing Building Renovations 1

38% New Building or 34% Existing Building Renovations 1

40% New Building or 36% Existing Building Renovations 1

42% New Building or 38% Existing Building Renovations 1

44% New Building or 40% Existing Building Renovations 1

46% New Building or 42% Existing Building Renovations 1

48% New Building or 44% Existing Building Renovations 1

credit 2 On-Site Renewable Energy 1 to 7

1% renewable energy 1

3% renewable energy 1

5% renewable energy 1

7% renewable energy 1

9% renewable energy 1

11% renewable energy 1

13% renewable energy 1

credit 3 Enhanced Commissioning 2

credit 4 Enhanced Refrigerant Management 2

credit 5 Measurement & Verification 3

credit 6 Green Power 2

PoInt contrIButIon

materialS & reSourceS Possible points 14

Prereq 1 Storage & Collection of Recyclables required

credit 1 Building Reuse 1 to 4

credit 2 Construction Waste Management 1 to 2

credit 3 Materials Reuse 1 to 2

credit 4 Recycled Content, 10% (post-consumer + 1/2 pre-consumer) 1

Recycled Content, 20% (post-consumer + 1/2 pre-consumer) 1

credit 5 Regional Materials, 10% Extracted, Processed & Manufactured Regionally 1

Regional Materials, 20% Extracted, Processed & Manufactured Regionally 1

credit 6 Rapidly Renewable Materials 1

credit 7 Certified Wood 1

indoor environmental Quality Possible points 15

Prereq 1 Minimum Indoor Air Quality (IAQ) Performance required

Prereq 2 Environmental Tobacco Smoke (ETS) Control required

credit 1 Outdoor Air Delivery Monitoring 1

credit 2 Increased Ventilation 1

credit 3 Construction IAQ Management Plan 1 to 2

credit 4 Low-Emitting Materials 1 to 4

credit 5 Indoor Chemical & Pollutant Source Control 1

credit 6.1 Controllability of Systems, Lighting 1

credit 6.2 Controllability of Systems, Thermal Comfort 1

credit 7.1 Thermal Comfort, Design 1

credit 7.2 Thermal Comfort, Verification 1

credit 8.1 Daylight & Views, Daylight 1 to 2

credit 8.2 Daylight & Views, Views 1

innovation & deSign Possible points 6

credit 1 Innovation in Design: Provide Specific Title 1 to 5

credit 2 LEED® Accredited Professional 1

regional Priority creditS Possible points 4

credit 1 Regional Priority Credit 1 to 4

Water efficiency Possible points 10

Prereq 1 Water Use Reduction required

credit 1 Water Efficient Landscaping 2 to 4

credit 2 Innovative Wastewater Technologies 2

credit 3 Water Use Reduction 2 to 4

total PoSSible Project Score Possible points 110

Certified Silver Gold Platinum

40-49 points 50-59 points 60-79 points 80+ points

SABIC-SFS-XXXX-ENwww.sabic.com/sfs

CONTACT USMiddle East and AfricaSABIC Global HeadquartersPO Box 5101Riyadh 11422Saudi ArabiaT +966 (0) 1 225 8000F +966 (0) 1 225 9000E info@sabic.com

AmericasSpecialty Film & SheetOne Plastics AvenuePittsfield, MA 01201USAToll-free1 800 323 3783 T 1 413 448 6665F (888) 443 2033 E spinside.sales@sabic.com

EuropeSpecialty Film & SheetPlasticslaan 14612 PX Bergen op ZoomThe NetherlandsT +31 (0)164 293678F +31 (0)164 293272E sfs.info@sabic-ip.com

Asia PacificSpecialty Film & Sheet2550 Xiupu RoadPudong201319 ShanghaiChinaT +86 21 3222 4500F +86 21 6289 8998E sfs.info@sabic-ip.com

Emailsfs.info@sabic-ip.com

DISCLAIMER:  THE MATERIALS, PRODUCTS AND SERVICES OF SAUDI BASIC INDUSTRIES CORPORATION (SABIC) OR ITS SUBSIDIARIES OR AFFILIATES (“SELLER”) ARE SOLD SUBJECT TO SELLER’S STANDARD CONDITIONS OF SALE, WHICH ARE AVAILABLE UPON REQUEST. INFORMATION AND RECOMMENDATIONS CONTAINED IN THIS DOCUMENT ARE GIVEN IN GOOD FAITH. HOWEVER, SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATION, WARRANTY OR GUARANTEE (i) THAT ANY RESULTS DESCRIBED IN THIS DOCUMENT WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN OR APPLICATION INCORPORATING SELLER’S MATERIALS, PRODUCTS, SERVICES OR RECOMMENDATIONS.  UNLESS OTHERWISE PROVIDED IN SELLER’S STANDARD CONDITIONS OF SALE, SELLER SHALL NOT BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS, SERVICES OR RECOMMENDATIONS DESCRIBED IN THIS DOCUMENT.  Each user is responsible for making its own determination as to the suitability of Seller’s materials, products, services or recommendations for the user’s particular use through appropriate end-use and other testing and analysis.  Nothing in any document or oral statement shall be deemed to alter or waive any provision of Seller’s Standard Conditions of Sale or this Disclaimer, unless it is specifically agreed to in a writing signed by Seller.  Statements by Seller concerning a possible use of any material, product, service or design do not, are not intended to, and should not be construed to grant any license under any patent or other intellectual property right of Seller or as a recommendation for the use of any material, product, service or design in a manner that infringes any patent or other intellectual property right.

SABIC and brands marked with ™ are trademarks of SABIC or its subsidiaries or affiliates.© 2015 SABIC. All Rights Reserved.