innovative emi shielding...2016/02/25 · clip-on gasket 6500 series 140 db d.c 50h 10kh 1mh 100mh...
TRANSCRIPT
Clip-on gasket 6500 series
140dB
50HzD.C 1MHz10kHz 100MHz 1GHz 90GHz
innovative EMI shielding
solutions
Holland Shielding Systems BV
Index
Conductive flexible edge protector
Sealing section
Conductive edge protector
Dynamic section
page 4 & 5
page 6 & 7
page 8
page 9 t/m 11
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
2
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
3
Clip-on gaskets 65OO
Type H
Type F
Type W
dB reduction
0,01
20
0
40
60
80
100
120
140
1
Mhz
10 100 10.00 40.000
Introduction
This newly developed clip-on gasket programme is extremely easy to mount and provides a solid mechanical attachment of the EMI shielding gasket. The gaskets can be assembled without the need of tools, simply by pressing the section by hand onto the metal flange of your enclosure without the use of any adhesive’s. The clamp mounted feature results in superb shielding performance, no degradation of shielding effect overtime and tremendous cost savings on production lines.
The clip-on range comes in three flavors:• Type W series
(Clip-on shielding gasket with water seal• Type F series
(Fully wrapped EMI shielding gasket)• Type H series
(For heavy duty applications)
Shielding performance
Our proven conductive textile provides over 96dB of broadband noise attenuation that is crucial for mid to high range shielding applications. For tough environmental applications, we recommend half-wrapped parts (Type W), however full-wrapped profiles are also available for specific applications (Type F). When high shielding demands are made in the low-frequency area we recommend to use Type H. Shielding effectiveness depends on surface, shape of gaskets and materials used.
Temperature resistance
An EPDM core with an operating temperature up to 100 deg. C and good resistance to UV, water, acids make the clip-on shielding gaskets the right choice for outdoor applications.
Applications
Special shapes and materials excel in dynamic or high cycling applications such as Faraday cage doors or access panels with low compression rates and very limited compression set.
Note: Gasket geometry and application determine the actual shielding effectiveness
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
4
Clip-on gaskets 65OO
Available types
Type F (Fully wrapped EMI shielding gasket)
The type-F clip-on gasket series has been specially designed to provide both EMI shielding and electrical conductivity. The conductive textile is fully wrapped around the gasket, resulting in higher shielding performance than the type-W (half wrapped version) only at the expense of water resistance.
Type W (Clip-on shielding gasket with water seal)
The type W clip-on gasket series has been specially designed to provide environmental (water) sealing as well as EMI shielding for outdoor electronics and telecom cabinet manufacturers. The conductive textile is half wrapped around the gasket, dividing the gasket in two parts, a part for electrical conductance / EMI shielding (made of highly conductive textile), and a part for water sealing. The half wrapped conductive textile provides over 96dB of broadband noise attenuation that is crucial for mid to high range shielding applications.
Type H (For heavy duty applications)
The type H clip-on gasket series has been specially designed for heavy duty applications and provides in addition EMI shielding also low frequency magnetic shielding. The type H series is covered with a high conductive metal cladding, the metal cladding is outdoor proof and suited for harsh environments making it suitable for military, medical and all other applications were high demands are made to the EMI shielding in the magnetic low-frequency area.
half conductive textile
knitted wire mesh
Conductivetextile
Type W Type F Type H
Example
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
5
Clip-on gaskets 65OO
Conductive flexible edge protector
5,6
8,5
2,05
2,05
9,5
4,62,3
15
10,5
52,1
14
10,5
22
17
1010
10
3515
15
3015
20
2015
15
9 7
32
14
9
32
12
12575
2580
2515
30
7,5
6,52
152
4515
30
6,5
2,01,6
9,5
510
30
9,5
2,22,2
14
Conductive flexible edge protector
The gasket is designed to slide easily over metal flanges to help reduce installation costs and is a good choice for retrofit applications.
Applications
• Connecting plates• ESD (static discharge)• EMI shielding
Benefits
• Easy gasket installation• Resistance to heat, humidity,
salt fog, corrosion and rain
* The red line is an indication of the conductive layer.
Partnumber 6501Available typeClamping rangeMaterial
F, H1 mmPVC
Partnumber 6504Available typeClamping rangeMaterial
F, H6 - 8 mmPVC
Partnumber 6508Available typeClamping rangeMaterial
F, H1 - 3 mmPVC
Partnumber 6507Available typeClamping rangeMaterial
F, H1 - 4 mmPVC
Partnumber 6503Available typeClamping rangeMaterial
F, H1 - 3 mmPVC
Partnumber 6502Available typeClamping rangeMaterial
F, H1 - 2 mmPVC
Partnumber 6506Available typeClamping rangeMaterial
F, H1 - 3 mmPVC
Partnumber 6505Available typeClamping rangeMaterial
F, H1 - 4 mmPVC
Partnumber 6509Available typeClamping rangeMaterial
F, H4 - 6 mmPVC
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
6
Conductive flexible edge protector
Clip-on gaskets 65OO
7,5
152
21,4
3015
20
10
14,4
3,5
2,4
1,54,9
9,3
29,3
5
2,2
14,35
Orderinginformation
When you want to order a conductive flexible edge protector please specify the following
For example
17
7
15
2
5020
2020
10
3,52,2
14,5
Partnumber 6510Available typeClamping rangeMaterial
F, H9 - 12 mmPVC
Partnumber 6514Available typeClamping rangeMaterial
F, H1 - 3 mmPVC
Partnumber 6511Available typeClamping rangeMaterial
F, H1 - 4 mmPVC
Partnumber 6512Available typeClamping rangeMaterial
F, H18 - 20 mmPVC
Partnumber 6513Available typeClamping rangeMaterial
F, H1 - 2 mmPVC
Part number Type
W : water sealF : fully wrappedH : heavy duty
6501 F
Technical datasheetTechnical datasheet
Clip-on gaskets 65OO
Sealing section
3,510
2,2
21,5 14,5
710
16
510
2,2
16,5
14,5
35250
60150
19,4
510
2,2
14,5 14,2 80
100
60120
14
2,510
2,2
2314
,5
5070
150
22
2,510
2,2
16,6
15,6
14,5
15
2,510
2,2
20
14,5
50180
55150
6080
55120
6,5
214
,59,
5
6,6
4010
40
18,5
2,510
2,2
14,2
20,5
14,5
10080
50
23
510
2,2
2317
6
14,5
10075
50275
16
21,5
2
1530
1540
6515
80
Sealing section
This combination of materials decreases the number of gaskets needed per cabinet. This makes the sealing section a economic solution for application where an environmental seal as well as EMI shielding is needed.
Features
• High performance solutiovvn• Very cost efficient solution
Partnumber 6522Available typeClamping rangeMaterial
W, F, H1 - 4 mmPVC
Partnumber 6526Available typeClamping rangeMaterial
W, F, H1 - 4 mmPVC
Partnumber 6525Available typeClamping rangeMaterial
W, F, H1 - 4 mmPVC
Partnumber 6521Available typeClamping rangeMaterial
F, H1 - 4 mmPVC
Partnumber 6524Available typeClamping rangeMaterial
W, F, H1 - 2 mmPVC
Partnumber 6523Available typeClamping rangeMaterial
W, F, H1 - 4 mmPVC
Partnumber 6530Available typeClamping rangeMaterial
W, F, H1 - 4 mmPVC
Partnumber 6529Available typeClamping rangeMaterial
W, F, H1 - 4 mmPVC
Partnumber 6528Available typeClamping rangeMaterial
W, F, H1 - 2 mmPVC
Partnumber 6527Available typeClamping rangeMaterial
W, F, H1 - 4 mmPVC
7
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
6
11,4
1
4,9
23,8
13,5
17,5
27
7
3,214,1 18,5
5,5
4
2,2
12
12,7
15,1
2
1,6
7,9
7
8,1
5,6 19,8
16,5
10
12,514
,7
5,5
2,2
14
12,3
21,2
5
6
35
54-5
8
17,3
5
105,5
16,6 2,2
12
14,5 65150
50125
Partnumber 6531Available typeClamping rangeMaterial
W, F, H2 - 4 mmPVC
Partnumber 6534Available typeClamping rangeMaterial
F, H2 - 4 mmPVC
Partnumber 6537Available typeClamping rangeMaterial
W, F, H1 - 3 mmPVC
Partnumber 6532Available typeClamping rangeMaterial
W, F, H2 - 4 mmPVC
Partnumber 6535Available typeClamping rangeMaterial
W, F, H1 - 4 mmPVC
Partnumber 6538Available typeClamping rangeMaterial
W, F, H1 - 4 mmPVC
Partnumber 6533Available typeClamping rangeMaterial
F, H2 - 4 mmPVC
Partnumber 6536Available typeClamping rangeMaterial
W, F, H1 - 2 mmPVC
Partnumber 6539Available typeClamping rangeMaterial
W, F, H2 - 4 mmPVC
410
2,2
12,5
15,5
14
30020
Clip-on gaskets 65OO
Sealing section
8
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
Technical datasheet
9
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
Clip-on gaskets 65OO
Conductive edge protector
14,8
8,614
,92,
3
11
5,2
152,
3
16
9,4
9,5
7,5
2
6
7,4
2,3
9,7
1,9
Orderinginformation
When you want to order a conductive flexible edge protector
please specify the following.For example
Conductive edge protector
This is a very rigid profile, used to protect sharp edges from damaging and still preserve the electrical conductance.This type is also suitable for connecting two steel plates or for static discharge.
Partnumber 6540Available typeClamping rangeMaterial
F, H0,5 - 2 mmEPDM, 70 ± 5 shore A
Partnumber 6544Available typeClamping rangeMaterial
F, H-EPDM, 60 ± 5 shore A
Partnumber 6543Available typeClamping rangeMaterial
F, H1,2 - 1,8 mmEPDM, 60 ± 5 shore A
Partnumber 6542Available typeClamping rangeMaterial
F, H1,2 - 1,8 mmEPDM, 70 ± 5 shore A
Partnumber 6541Available typeClamping rangeMaterial
F, H2 - 5 mmEPDM, 70 ± 5 shore A
Part number Type
6540 F
Please specify the type from the tables
W : water sealF : fully wrappedH : heavy duty
Technical datasheet
6,5
5,49,8
1210
,4
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
10
Clip-on gaskets 65OO
Dynamic section
3 7,2
1314
16,5
8025
25060
3,67,6 14
2
12
65100
30
4,59,7
15
30,7
15
14,523
,2
160200
250
2,512,5
20,5
29,5
11,717,5
70180
125200
38,8
33,5
10,7
22,8
12515
15
4020
100
3,68,6
24
1013
6080
35
37
3310
,722
,3
2,48,3
12,5
7,5
9
15020
20
6020
25020
Partnumber 6551Available typeClamping rangeMaterial
W, F, H0,8 - 3 mmEPDM, 60 ± 5 shore
Partnumber 6555Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore
Partnumber 6554Available typeClamping rangeMaterial
F, H1 - 2 mmEPDM, 60 ± 5 shore
Partnumber 6552Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore
Partnumber 6556Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore
Partnumber 6557Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore
Partnumber 6558Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore
Partnumber 6553Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore
Partnumber 6559Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore
Dynamic section Simple clip-on installation for doorjambs and similar needs, edge mounts, low and high deflection.
For applications where a small dynamic range is required and a clip-on mounthing is preferred. Mounts simply bij pressing into position.
The gasket comes with retaining lances lo look into desired position.
* The red line is an indication of the conductive layer.
Technical datasheet
11
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
Clip-on gaskets 65OO
Dynamic section
7
11,9
5,49,8
10,4 6,5
11
5,49,8
7,1
10,4
8,8
5040
80
5,42,2
9,8
11
10,4
10
5050
10050
37,4
10,5
10,6
20
6070
160150
14,220,7
7,22,7
12,418
11,5 8070
25150
11,616,5
5,42,2
9,5
16
12,814
10065
30190
8
1,2
1,8
12,56,2
11,5
9
2060
2055
26
12
515
4,5
250250
70
4,912,18,9
10,6
13,7
20075
30200
5,4
9,8
2,2
10,4
21
5020
7020
2,7
8,9
9,316
,2
4515
80
3035
1580
Partnumber 6563Available typeClamping rangeMaterial
F, H1 - 4 mmEPDM, 60 ± 5 shore A
Partnumber 6567Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6568Available typeClamping rangeMaterial
W, F, H3 - 5 mmEPDM, 60 ± 5 shore A
Partnumber 6569Available typeClamping rangeMaterial
W, F, H1 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6570Available typeClamping rangeMaterial
W, F, H1 - 2 mmEPDM, 60 ± 5 shore A
Partnumber 6565Available typeClamping rangeMaterial
W, F, H1 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6566Available typeClamping rangeMaterial
W, F, H0,5 - 2 mmEPDM, 60 ± 5 shore A
Partnumber 6561Available typeClamping rangeMaterial
W, F, H1 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6562Available typeClamping rangeMaterial
W, F, H1 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6564Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6560Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore A
Technical datasheet
9,85,4
2,2
10,4
27
16,6
12
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
Clip-on gaskets 65OO
Dynamic section
22
8,94,2
10,613,7
184,9
4575
10250
8020
15020
10
311
31,9
14
20
20
15
80
19,4
5
16,6
12,9
11
125150
35
18,7
4,5
14,612
4575
30150
40,7
5,42,2
10
11
105
21,512,5
5020
12020
11,1
4,51,911,3
9,714,6
3
15030
65
26,1
4
2,4
17,814,916
,2
19,9
2580
25125
15,6
5,49,8
31,9
10
10055
18040
13,5
4,59,8
14,512
16
1,580
70
25180
Partnumber 6571Available typeClamping rangeMaterial
F, H2,5 - 3,5 mmEPDM, 60 ± 5 shore A
Partnumber 6575Available typeClamping rangeMaterial
F, H2 - 4 mmEPDM, 70 ± 5 shore A
Partnumber 6572Available typeClamping rangeMaterial
F, H1,5 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6576Available typeClamping rangeMaterial
F, H2 - 4 mmEPDM, 60 ± 5 shore A
Partnumber 6579Available typeClamping rangeMaterial
W, F, H1 - 3 mmEPDM, 70 ± 5 shore A
Partnumber 6573Available typeClamping rangeMaterial
F, H2 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6577Available typeClamping rangeMaterial
F, H2 - 4 mmEPDM, 60 ± 5 shore A
Partnumber 6580Available typeClamping rangeMaterial
W, F, H1 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6574Available typeClamping rangeMaterial
W, F, H1 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6578Available typeClamping rangeMaterial
F, H2 - 4 mmEPDM, 60 ± 5 shore A
Partnumber 6581Available typeClamping rangeMaterial
W, F, H1 - 2,5 mmEPDM, 60 ± 5 shore A
Technical datasheet
13
Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - [email protected] - www.hollandshielding.com
Clip-on gaskets 65OO
Dynamic section
1,6
62
7,59,
55,
5
1510
7010
18,8
5,52,531,5
z
� 20
13,5
50
4,5
14
1214,6
5,49,8
12
12,4
4,2
2
13,3
14
9
21 3 10,5
1,5 7
10
1,5
1,2 10,5
7,5
21,5
26
21,5
13,6
49
Orderinginformation
When you want to order a conductive flexible edge protector
please specify the following.For example
Partnumber 6582Available typeClamping rangeMaterial
F, H1 - 2 mmEPDM, 60 ± 5 shore A
Partnumber 6583Available typeClamping rangeMaterial
F, H1,5 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6584Available typeClamping rangeMaterial
W, F, H1 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6589Available typeClamping rangeMaterial
F, H0,5 - 1,5 mmEPDM, 60 ± 5 shore A
Partnumber 6587Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 60 ± 5 shore A
Partnumber 6588Available typeClamping rangeMaterial
F, H1 - 3 mmEPDM, 70 ± 5 shore A
Partnumber 6586Available typeClamping rangeMaterial
W, F, H1 - 3,5 mmEPDM, 60 ± 5 shore A
Partnumber 6591Available typeClamping rangeMaterial
F, H0,5 - 2 mmEPDM, 60 ± 5 shore A
Part number Type
6551 F
Please specify the type from the tables
W : water sealF : fully wrappedH : heavy duty
Holland Shielding Systems BV
Send a drawing of the overall enclosure with fixings and details of the gap/gasket location; enclose yourfull address + tel./fax nrs.we will send a sample within 24 hrs.
EMC helpdeskphone +31-78 613 13 [email protected]
Send type or drawings and quantitiesin m/pcs, if possible with specifications or product type of any competitor.
Holland Shielding Systems BVP.O. Box 730NL - 33OO AS DordrechtThe NetherlandsPhone : +31-78-613 13 66Fax : +31-78-614 95 85Internet: http://www.hollandshielding.comE-mail : [email protected]
innovative shielding
award
24 - hrs quote service
24 - hrs sample service