innovarÉ systems - ashegroup.co.uk©... · ioar sstes innoarÉ systems our approach compete...

A PROSPECTUS FOR COLLABORATIONJULY 2015

A PARTNERSHIP APPROACH

INNOVARÉ SYSTEMS

INNOVARÉ SYSTEMS

INNOVARÉ SYSTEMS

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

Work on construction sites is slowly being replaced by highly controlled factory environments, for reasons of speed, quality, safety and the unpredictability of on-site labour and materials supply.

Innovaré is meeting the challenges of today’s construction environment by providing a radically quicker speed of build than traditional construction, which translates into reduced preliminaries and holistic cost savings for you.

Our i-SIP system simplifies construction and makes it easy to optimise the airtightness and thermal performance of your new build. From simply complying with guidelines, to meeting the highest specifications for sustainability.

But that is the minimum you expect.

What you will value most is our service. A single partner with the Complete Delivery. The only major provider in the UK of a totally integrated service in the design, engineering, manufacture, supply and installation of energy efficient SIP structures.

We have all the processes and systems in place to deliver in partnership schemes that exceed today’s construction demands.

THE WAY BUILDINGS ARE BUILT IS CHANGING...

INNOVARÉ: OUR APPROACH

WHAT WILL OUR PARTNERSHIP DELIVER?We offer you energy efficient structures with the speed of off-site construction and the security of a single partner in charge of the complete delivery process.

Our aim is to make you successful through unparalleled levels of service, quality, efficiency and safety.

So our commitment to you is to engage with you from the very beginning, so we can evolve design-led solutions which make the most of our unique offering.

All this whilst always achieving and exceeding the performance criteria of specific schemes on the most cost viable route.

“

”

INNOVARÉ IS THE ONLY MAJOR SIP

MANUFACTURER IN THE UK TO DESIGN, ENGINEER, MANUFACTURE, DELIVER AND INSTALL THEIR OWN SYSTEM. THE RESULT IS A CONTROL OVER WHAT IS DELIVERED AND A BUILDING SYSTEM WITH A CLEAR SUPPLY CHAIN OTHERS CANNOT HAVE, WHICH RESULTS IN A RESPONSE AND UNDERSTANDING THAT IS SECOND TO NONE.

Peter Blunt Managing Director

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS


STRUCTURAL INSULATED PANELSLet’s start with the basics.

SIPs are prefabricated, high performance, lightweight building components used in walls and roofs to provide sustainable buildings with high thermal performance and airtightness.

The panels are made by sandwiching two layers of orientated strand board structurally adhered to a core of Expanded Polystyrene (EPS).

SIP walls can bear considerable vertical and horizontal loads with reduced internal studding. The load carried by the SIP is transferred to ground by the OSB skins, held in position by the core.

It’s a system that is extremely strong, energy efficient and cost effective to use. Not to mention quick to assemble on site...

KEY BENEFITS

• Strong thermal envelope – U values as low as 0.10W/m²K• Eliminates cold bridging, greatly reducing heat losses• Assists air tightness strategy• High speed of construction• Low post construction snagging

WHAT ARE SIPS? SPEEDI-SIP BY INNOVARÉ THERMAL

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS


The i-SIP system is produced in our specialist manufacturing facility in Coventry.

We don’t believe in off-the-shelf, or take it or leave it solutions. We custom design and engineer the i-SIP to your needs.

Strict quality control procedures ensure quality and consistency of panels. All project batches have pull out tests, backed by a suite of ISO management procedures.

2 x 11mm OSB is adhered to an EPS foam insulation core, with variable thicknesses depending on performance requirements.

Design-wise, i-SIP is remarkably flexible and we can adapt it to suit any number of configurations and geometric designs.

Maximum panel length - 5980mm Maximum panel height - 2770mm (panel can be rotated 90o to install)

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

WHAT ARE SIPS?

LARGE FORMAT

SPEEDI-SIP BY INNOVARÉ THERMAL

by

PRODUCT DIMENSIONSOverall thicknesses 111 mm 136 mm 162 mm 206 mm 257 mm 297 mm 329 mm


LARGE FORMAT PANELSFew methods of build can match the speed and air permeability levels achievable due to the large format nature of our panels. The only ones of its type manufactured in in the UK, they can measure up to almost 6 x 3 metres.

Fewer structural joints and connections make our system one of the easier ways to achieve low levels of air leakage (as low as 0.6 m3/m2hr@ 50 Pa) with proven products and details unique to us.

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS


27

70

5980

by


Design and Engineering Off Site Construction in Factory

On site installation

Handover TIME SAVINGS

THE BENEFITS OF BUILDING QUICKERThere are costs to being on the building site. The quicker you can build means the earlier you can access revenues. The less the risk to health & safety.

The factory takes much of the burden of risk and hassle from the building site into a highly controlled environment where it can be safely managed.

• Less labour, less materials and less deliveries causing on site disruption;

• Reduced prelims and holistic cost savings of shortening the build programme;

• Less working at height, reduction of risk, noise and dust.

BUILDING AT THE SPEED OF I-SIP

Design and Engineering Site Development & Foundations

Structural Frame Construction Handover

I-SIP CONSTRUCTION

SITE BUILT CONSTRUCTION

Site Development & Foundations

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

QUICK WEATHERPROOF ENVELOPE



QUICK WEATHERPROOF ENVELOPEA quicker weather-tight structure provides a safe and dry working environment for follow on trades to start and finish much earlier.

This reduces pre-lim costs and make them more predictable.

It also has the benefit of taking brick off the critical path.

This offers a more weather resistant programme compared to traditional construction. Low temperatures and wet weather will not hinder progress.

We help co-ordinate the interfacing of trades, who have a much simpler system to understand and work with.

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS



BUILD FOR ANY THERMAL PERFORMANCEBuilding regulations have changed. Fabric energy efficiency standards is now an essential part of the equation, demanding much more of the industry and driving the market for SIP building systems.

It’s simple. Highly insulated buildings keep heat in. Low carbon construction – throughout the building envelope – needs insulation, airtightness and junction performance, as well as the balancing required from building services and ventilation.

Our Fabric First approach puts sustainability into the heart of the design. We can build for any desired thermal performance, achieving U-values as low as 0.10W/m²•K

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS


WHAT DETERMINES HEAT LOSS?

Ventilation37%

Fabric40%

Bridging23%

U-value (W/m2K)

Service void Standard Standard Reflective VCL

Reflective VCL

External cavity

Standard Breather

Reflective Breather

Standard Breather

Reflective Breather

SIP thickness 111 0.261 0.261 0.232 0.198

136 0.215 0.183 0.194 0.170

162 0.181 0.158 0.166 0.148

Full Timber 206 0.143 0.128 0.134 0.122

257 0.115 0.105 0.109 0.101


THERMAL BRIDGINGWith a typical Y-value of 0.025 W/m²•K, we exceed the accredited and enhanced construction details values of 0.08 and 0.04 W/m²•K respectively

THERMAL MASSBy including phase change material into the system, we combat against overheating by increasing the thermal mass and encouraging night-time purge

THERMAL MODELINGWe provide a free service. On the right is an example of where careful detailing of a steel beam enabled a 50% reduction in heat loss. The bottom picture shows where 25mm insulation was used to encase the steel

We calculate psi-values, Y-values, U-values and model thermal bridging and cold bridging on request

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS


– 28.3

– 27.3

– 26.3

– 25.3

– 24.3

– 23.3

– 22.3

– 21.3

– 20.3

29.00C

19.90C

– 22.6

– 20.0

– 17.5

– 15.5

21.40C

11.00C

Frame

SIP

INNOVARÉ: COMPLETE DELIVERY

OUR SERVICE

WE ARE A SINGLE SOURCE SIP SUPPLIER. THE ONLY MAJOR PROVIDER TO CONTROL THE COMPLETE CONSTRUCTION PROCESS.

Only by doing this can we harmonise and optimise every aspect of our delivery process to your needs, ruthlessly engineer out inefficiency and deliver the best value construction.

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

DESIGN

ENGINEER

MANUFACTURE

SUPPLY

INSTALL

PROJECT MANAGEMENT

DESIGN

SUPPLYENGINEER INSTALLMANUFACTUREDESIGN

ENGINEER MANUFACTURE SUPPLY INSTALL


INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

DESIGNOur Design Team gets involved with you early in the design, so you can get the most out of the unique benefits of our system.

This leads to few design concessions and opens up more opportunities for clever value engineering.

We assist wherever possible, for example by providing a full thermal modeling service that can bring a new perspective to the design process.

We don’t just have a comprehensive BIM library, but we design in BIM in incredible detail. We produce 3D modeling compliant with BIM processes on request.

The end result is super efficient buildings and more cost effective construction.

DESIGN ENGINEER MANUFACTURE SUPPLY INSTALL


INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

ENGINEERi-SIP is a product engineered for performance. Its design principles make best use of materials whilst engineering out waste and inefficiency from the finished product.

It follows the principle of composite material construction to deliver a product whose load bearing capacity, structural integrity and hygrothermal, fire resistance and acoustic performance exceeds any individual component it is made up of.

Our structural engineers provide detailed calculations to ensure that designs using our system are practical and cost-effective.



INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

MANUFACTUREOur specialist manufacturing facility in Coventry is a result of serious investment and R&D in manufacturing systems.

Hi-tech production lines take construction from the building site to a highly controlled environment overseen by professional line operators.

CNC drill technology driven by industry-leading software gives you the flexibility to create any number of bespoke elements that bring value to your design.

All materials are sustainably sourced and manufactured under international certification schemes.



INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

SUPPLYDelivery is carefully scheduled to match assembly to reduce build times and minimise storage on-site.

A clear project management schedule is made available to everyone - architect, main contractor and clients - along with detailed drawings and structural calculations supported by BBA certification.

Our off-site delivery programme offers a more robust and predictable procurement route, less affected by macroenvironmental factors such changing market conditions over time, on-site materials and labour supply and risks which can affect how and when sites may need to be developed.

Therefore, we are able to respond fast to changing local needs and circumstances.



INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

INSTALLInstallation is quick, simple and efficient.

On site assembly is co-ordinated by your Innovaré Systems Project Manager who supports you throughout.

Full risk assessments and Health and Safety plans are provided.

Our teams are CSCS accredited, with SSSTS team leader’s CPCS lift supervisors, slinger banksmen, First Aid training and relevant training to suit on site fall arrest systems.

We work closely with our approved installation teams, building long term relationships which ensure a smooth installation process on site to suit your programme.


Kender Estate Complete Structure

Kidwells Estate infill

There are two fundamental i-SIP solutions

COMPLETE STRUCTUREThe i-SIP building system provides the complete dry structure of the building including internal and external walls, floors, truss and panelised roofs.

INFILL AND WRAPPINGi-SIP infill is a practical and economic way of adding thermal insulation and infill structure to steel or concrete frames, allowing rapid cladding of the structural core and a variety of finishes.

They can sit inside, or outside the frame itself to take out frame cladding.

In all cases the product will be engineered for load bearing capability, racking resistance and wind loading in accordance with the test results on our delivered schemes.

INNOVARÉ: OUR PACKAGE

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

WALLS

M&E INTEGRATION

ROOFSFLOORS CLADDING


I-SIP EXTERNAL WALLSi-SIP walls can bear considerable vertical and horizontal loads with reduced internal studding and provide racking and bending resistance against wind loads.

They are used for external walls with heights up to 4 storeys.

Walls are manufactured either as small panels, or as large format panels with pre cut window and door apertures.

Size and location of window apertures are considered in the our site specific structural calculations for racking resistance, made by our in house design team.

Large format panels up to 6m can provide double height spaces or simply for fast speed of installation.

Wall panels bear onto the foundations via a treated timber sole plate firmly secured to the sub-structure

INTERNAL STUD PARTITIONSWe include internal stud partitions for load bearing or non-load bearing partition walls as required, constructed of timber studwork with timber sheathing boards if needed.

This is cost-effective, allowing for easy installation of services and management of acoustics for room partitions.

STRUCTURAL BEAMS AND COLUMNSWhere required, Innovaré can provide steel or timber beams, columns or frames to enhance the structural frame of the building.

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

WALLS

M&E INTEGRATION



ENGINEERED JOISTSOpen web joists, I-joists or solid engineered timbers are used to frame the floor or roof and deck with timber board. We pre-assemble joists and deck into cassettes to improve speed and safety of installation. Acoustically, they are superior and will reduce floor thickness.

Metal web joists allow installation of services and soil pipe without the need for drilling and removes the risk of over adaption onsite from electricians and plumbers, which would otherwise result in structural failure.

We appreciate a solid feel to floors. So we recommended the use of an anhydrite screed such as SCREEDFLO, a CE certified product comprising anhydrite binder mixed with selected sharp sand and water.

DIFFERENTIAL MOVEMENT This is only a concern when working with standard timber frame systems. TRADA guidelines allow 8-10mm differential movement per floor. i-SIP has 0 differential movement, but for connections and floor zones we allow 3-4mm per floor.

i-SIP does not experience any significant dimensional changes. This means the building you design better reflects the complete building’s performance. i.e. no performance gap.

This makes SIPs more popular with those concerned by the differential movement in timber buildings.

The metal web joists we use reduce settlement, as they’re top hung cord.

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

WALLS

M&E INTEGRATION



PITCHED / MONO / SAWTOOTH ROOFS

I-SIP can form pitched, mono-pitched, sawtooth roofs and can be finished with any normal roof covering.

They usually consist of large panels supported on purlins and ridge beams.

Roofs resist dead and live loads with clear spans up to 3.5m.

Pitched SIP roofs have advantages over traditional cut or trussed rafter roofs. They provide an open, unobstructed roof void that is part of the thermal envelope of the building, ideal for use as a room in roof structure.

Openings for roof lights are formed in the same way as walls. Additional or new openings can be formed with relative ease under the guidance of the structural engineer.

ENGINEERED TRUSSES are provided to create a cold roof structure, attic roof or to support an i-SIP roof.

Trussed rafter or cut pitched roofs or timber joisted flat roofs can equally be used, and would be of the same design and construction as for any other build method.

FLAT ROOFS We deliver flat roof structures with timber roof cassettes, either insulated above by the Main Contractor or closed insulated stress skinned cassettes which can be finished with any form of normal roof coverings.

We assess all roofs on an individual project by project basis, tied back to your specific needs and drivers.

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

WALLS

M&E INTEGRATION



CLADDING INTERFACESi-SIP can be clad with anything, anywhere on the panel, supporting weight up to 50kg/m².

With low bearing brickwork, standard ties for SIP walls can be fixed anywhere on the panel.

Light weight cladding, e.g. timber or render systems, can be supported directly off the i-SIP structure.

Cladding type may affect the structural design loads of the building and should be considered during the design.

As there are minimal solid timber studs to fix the cladding, fixings used must provide adequate pull out resistance which we will advise you on a project by project basis.

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

WALLS

M&E INTEGRATION


Cladding SIP buildings can be clad with any type of material, As with loadbearing studwork timber framed buildings, the cladding forms a rain screen for the structure behind. Masonry cladding will require wall ties secured to the iSIP and built into the masonry cladding. Light weight cladding, e.g. timber or render systems, can be supported directly off the iSIP structure. Cladding type may affect the structural design loads of the building and should be considered during the design. As there are minimal solid timber studs to fix the cladding, fixings used must provide adequate pull out resistance which we will and advise Lend Lease on a project by project basis.

Services Our system does not allow services to be run within the thickness of the SIP, this only affects external walls and requires a service baton, we can price to fix this in the factory . Chasing out of a SIP to accommodate services compromises the structural performance of the panel and is not permitted. Once services are installed, wall linings are fixed to the battens by Lend Lease follow on trades.








M&E INTEGRATIONAn optimised structural grid provides flexibility for ventilation and M&E strategy.

We work closely with M&E subcontractors during design to provide a fully integrated solution.

Whilst our system does not allow services to be run within the panel itself, which would affect the structural performance, this only affects external walls and requires a service baton which we can price to fix in the factory.

Once services are installed, wall linings are fixed to the battens by your follow on trades.

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

WALLS

M&E INTEGRATION


INNOVARÉ: WHO WE ARE

Our panel system gives the freedom to choose from the universe of designs and provides the flexibility to meet the exact specification needed for the job, large or small.

Our approach combines mass production with individual customisation, meaning we can produce consistent and precise results whilst creating the bespoke elements that can make bring real value to your design.

And if we can make it, we can build it.

We try to make things simpler. Therefore, i-SIP is inherently simpler than most other building systems. We’ve engineered complexity out.

Being in control of the whole process means you can reach the full potential of one of the most simple and efficient building components known to man.

Our streamlined delivery process, means the benefits are delivered to you consistently every time.

Working at height. Delays. Deliveries. Health and safety. Weather. There are costs and risks to being on site longer than you have to.

The fast assembly made possible by our large format i-SIP system lowers overall build time and construction costs by keeping time spent on-site to a minimum.

The result is a more efficient building and more cost effective construction.

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

OUR PRINCIPLES OUR CULTUREOUR PEOPLE ACCREDITATION

USING INNOVATION TO DELIVER FLEXIBILITY AND STRENGTH

BUILD SIMPLICITY AND SUSTAINABILITY

SAVING YOU TIME AND MONEY


MANAGEMENT TEAMPete Blunt – Managing Director

COMMERCIAL Jason Bassett – Commercial Manager

BUSINESS DEVELOPMENTPaul Inch – Business Development Manager [email protected] M: 07527 470083

PROJECT DEVELOPMENTAlex Banks – Project & Design Manager Graeme Parkin – Project Manager Nick Clarke – Design Coordinator

TECHNICALSam Dawe– Technical Manager

SUPPLY CHAIN Craig Lee - Supply Chain Manager

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS



OUR CULTURE CORE VALUESAs a company which puts ethics first, the way we work reflects our values and serves as a common thread throughout the service we deliver.

Our service is founded on openness, honesty, always being dependable and collaborative, continually adapting to your needs and taking pride in and achieving excellence in everything that we do for you.

INTEGRITYAlways be honest and treat others as you would like to be treated

QUALITYBe professional and do a job of which everyone can be proud

OPENNESSBe open with each other and be prepared to listen

CARINGEncourage, support, understand and respect each other

PROGRESSIVEContinually adapting and improving the best

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS



IN TERMS OF RISK MANAGEMENT, OUR SYSTEMS AND PROCESSES ARE:

• Fully testing and accreditation by British Board of Agrément BBA for the Design, Engineering, Manufacture and Installation of both our Complete Structure and Infill/Wrap systems.

This covers the system with a 60 year lifetime guarantee, as well as BRE, NHBC, LABC and ISO:9001

• Independently audited quality control procedures through ISO:9001 and BBA

• Fully CSCS accredited, SSSTS and SMSTS with first aid training

OUR COMPLETE DELIVERY PROCESS IS BACKED BY A SOLID ISO QUALITY MANAGEMENT SYSTEM:

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS


FIRST CLASS PERFORMANCE IN HSEQThe following statements detail our commitments to Health, Safety, Environment and Quality:

COMMITMENT TO HEALTH:Striving to eliminate all work-related ill health by:

• Continually reviewing health risks and advising employees on all work-related health matters.

• Preventing exposure to physical, chemical and biological hazards in the workplace and controlling it as far as reasonably practicable.

• Addressing health needs arising from employees’ disabilities or special needs

COMMITMENT TO SAFETY:Striving to eliminate all work-related injuries and promote a safety-conscious culture by:

• Identifying the safety risks and continually striving to eliminate them.

• Communicating to all employees and contractors any hazard risk and best practice.

COMMITMENT TO ENVIRONMENT:Safeguarding our global environment for future generations by:

• Continually looking for ways to use resources more efficiently through good design, use of sustainable materials and reducing waste.

• Preventing pollution by complying with environmental legislation, policies, charters and by continually improving the systems that help to reduce the risk of environmental incidents.

• Communicating to all employees environmental risks and best practice.

COMMITMENT TO QUALITY:Continually improving customer satisfaction by:

• Ensuring that all work is carried out in accordance with regulatory requirements, industry standards and meets the requirements of ISO 9001:2008.

• Applying an integrated approach that ensures a consistent and high standard of service is provided

• Regularly reviewing our processes and procedures to improve the clarity and efficiency of everything we do.

INNOVARÉ: HEALTH & SAFETY

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

PEOPLEWe will foster healthy, safe and environmentally responsible behaviours by all employees. Personal ownership of safety is a fundamental part of working for Innovaré.

Consequently, everyone has an obligation to ensure that their actions never put themselves, their colleagues or the public at risk.

IMPACTSWe will assess and mitigate the potential impacts of all our activities against our health, safety, environment and quality framework.

CONTINUOUS IMPROVEMENTWe will continuously improve our quality of service through the monitoring of our performance against clear goals and specific criteria.

STAKEHOLDERS We will pro-actively engage with stakeholders to understand their risks and needs, communicating the impact and opportunities delivered by our operations on their business.

COMPLIANCE

We will develop and implement programmes to assure and exceed compliance with applicable environmental, health and safety regulations.

INNOVARÉ: HEALTH & SAFETY

”

OUR ENTIRE STAFF SHARE A

CULTURE OF COMMITMENT TO QUALITY THROUGH CUSTOMER SATISFACTION, CONTINUAL IMPROVEMENT AND GOOD HEALTH, SAFETY AND ENVIRONMENTAL PRACTICES.

Peter Blunt Managing Director

“INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

TIMBER FROM GENUINELY WELL MANAGED FORESTSInnovaré aspires to be a sustainable organisation and recognises its responsibility to procure materials from sustainable sources.

We aim to procure all the timber materials used on our projects so that we have a positive environmental, social and economic impact.

More specifically we will work with our stakeholders to ensure that on projects we:

• Eliminate the use of illegal timber• Eliminate the use of timber from

uncertified high conservation value forests

• Always achieve Full Forest Stewardship Council® (FsC) Project Chain of Custody Certification

We always provide full FsC Chain of Custody documentation to prove the point of origin of our sustainably sourced timber.

Innovaré FSC certificate number TT-COC-004446

Zero Ozone Depletion Potential (ODP)

Zero Global Warming Potential (GWP)

Zero HCFC/CFC

BRE Green Guide ‘A+’ Rated

Products

100% recyclable

INNOVARÉ: SUSTAINABILITY

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

OUR SUPPLY CHAIN IS IMPORTANT TO USWe pay people we trade with on time. Our stakeholders know what to expect when they engage with us, which builds confidence in us and improves our relationships.

The success of our projects is based on how carefully we vet our supply chain. We have long term and meaningful relationships based on collaboration and the desire to work only with ethical partners.

BUILDING A SUSTAINABLE FUTURE THROUGH ENERGY EFFICIENT BUILDINGSEven with an uncertain future, higher standards for insulation and airtightness are guaranteed. We need to provide end users with buildings that remain comfortable and save energy.

SAP is the Government’s Standard Assessment Procedure for Energy Rating of Dwellings.

An assessment of the i-SIP compared to traditional construction found a 48% reduction in space heating fuel costs was generated by the improved thermal performance of the i-SIP system.


INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

SEQUESTERED CARBONis carbon that might otherwise be in the form of atmospheric CO2 which has been safely trapped within timber building materials.

Buildings made out of SIPs become a form of carbon storage. The carbon is locked up until the building is demolished and the carbon released.

This helps offset carbon, essential for meeting the zero carbon homes standard.

The long lifespan of our buildings make them ideal for this carbon storage purpose in a way which can be more easily observed and measured.

We will calculate carbon expenditure and advise on methods for further reduction.

Responsibly increasing the use of timber in construction can result in more carbon savings and if managed correctly stimulate the creation of more forests.


Carbon Sequestration

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

THE GREEN MAN A BUILDING FOR EVERYONE

SCOPEi-SIP roof and walls for a timber hybrid structure

NET CARBON SEQUESTRATIONTotal timber used 119m3 Sequestered CO2 95.2 (tonnes) Embodied CO2 30.8 (tonnes)

Net CO2 sequestration 64.4 tonnes

Client PHOENIX HOUSING ASSOCIATION Contractor OSBORNE Architect BLACK ARCHITECTURE Value £5M

HOW TO INSTALL IN SIPS – COMPLETE STRUCTUREExternal SIPs panels, internal timber frame, first floor cassette floors, glulam timber support beams, roof trusses, steel frame, SIPs roof panels.

INNOVARÉ: INSTALLATION

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

Example of installation of full structure using external Sips panels, internal timber frame, 1st

floor cassette floors, glulam timber support beams, roof trusses, steel frame, sips roof panels.

Block and beam floor installed.

Full height scaffold erected, soleplate being installed

Ground floor panels being off load with crane and lifted into position

Ground floor external sips panels being installed

Ground floor panels fixed and braced

Example of installation of full structure using external Sips panels, internal timber frame, 1st

floor cassette floors, glulam timber support beams, roof trusses, steel frame, sips roof panels.

Block and beam floor installed.

Full height scaffold erected, soleplate being installed

Ground floor panels being off load with crane and lifted into position

Ground floor external sips panels being installed

Ground floor panels fixed and braced

FULL HEIGHT SCAFFOLD ERECTEDAND SOLEPLATE INSTALLATION

GROUND FLOOR EXTERNAL SIPS PANELS INSTALLATION

GROUND FLOOR PANELS

CRANE OFF LOAD AND LIFTED INTO POSITION

BLOCK AND BEAM FLOOR INSTALLED


INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

Internal timber frame panels being fitted

Steel frame along with glulam timber support beams installed ready to take sips roof panels

Roof sips panel being craned into position.

Roof membrane fitted ready for battens.

Internal timber frame panels being fitted

Steel frame along with glulam timber support beams installed ready to take sips roof panels

Roof sips panel being craned into position.

Roof membrane fitted ready for battens.

STEEL FRAME ALONG WITH GLULAM TIMBER SUPPORT BEAMS INSTALLED READY TO TAKE I-SIP ROOF PANELS

INTERNAL TIMBER FRAME PANELS BEING FITTED

ROOF I-SIP PANEL BEING CRANED INTO POSITION


INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

Roof cassette to the main entrance block craned into position .

Roof cassette to the main entrance block craned into position .

ROOF CASSETTE TO THE MAIN ENTRANCE BLOCK CRANED INTO POSITION

ROOF MEMBRANE FITTED READY FOR BATTENS

HANDOVER & FINISHES

CONTACTS

CONTACT

Paul Inch – Head of Business Development [email protected] M: 07527 470083

Andrew Cook – Business Development Manager [email protected] M: 07736 597064

Peter Blunt – Managing Director [email protected] M: 0797 200 7938

Alex Banks – Project Manager and Design lead [email protected] M: 07527 470 048

Jason Bassett – Commercial Manager [email protected] M: 07875 177 753

Thomas Joiner – Development Manager [email protected] M: 07527 470 095

Sam Dawe– Tecnical Manager [email protected] M: 07736 597 345

INNOVARÉ SYSTEMS LTD

Unit B, Earlplace Business Park Fletchamstead Highway Coventry CV4 9XL

www.innovaresystems.co.uk

T: 0845 674 0020 E: [email protected]

INTRODUCTION

OUR APPROACH

COMPLETE DELIVERY

OUR PACKAGE

WHO WE ARE

HEALTH AND SAFETY

SUSTAINABILITY

INSTALLATION

CONTACTS

innovarÉ systems - ashegroup.co.uk©... · ioar sstes innoarÉ systems our approach compete...

Documents