innerzone 3 - grainger industrial supply - mro … · and nfpa 1971-2007, including the 500°f for...
TRANSCRIPT
esseyepro.com© 2013 Eye Safety Systems, a subsidiary of Oakley, Inc. All rights reserved. This product may be covered by one or more U.S. patents, as found on www.esseyepro.com/patents. (06-28-13)
KEY FEATURES All goggle components are extremely heat resistant
1-piece wrap-around Nomex® strap system with Velcro tabs
Advanced ESS ClearZoneTM FlowCoat lenses eliminate fog inside & prevent scratches outside
Full-perimeter ventilation & filtration system minimizes lens fogging & filters smoke & airborne particles
Patented Speed-ClipTM system facilitates quick strap adjustment
Interchangeable 2.6mm high-impact Polycarbonate lenses
Distortion-free optics & 100% UVA/UVB protection
Roomy frame fits over most prescription eyewear
AVAILABLE CONFIGURATIONS Innerzone 3TM Kit: Includes Frame w/ 1-Piece Strap & Clear Lens
Innerzone 3 (Gray) Model: #740-0273
PRODUCT DESCRIPTIONThe ESS Innerzone 3TM features a wrap-around strap system that
secures with two Velcro tabs to any type of helmet. This system
allows the goggles to be stowed on the front of a helmet. The patented
Speed-ClipTM strap system facilitates quick strap adjustment, even
with gloves on.
The Innerzone 3TM is compliant with U.S. Federal OSHA, ANSI Z87.1+,
and NFPA 1971-2007, including the 500°F for 5-minute oven test.
BALLISTIC PROTECTION STANDARDSCompliant With: NFPA 1971-2007 Edition, ANSI Z87.1-2010,
CE EN 166, U.S. Federal OSHA
COLORSFrame: Gray
Available Lens Colors: Clear
INNERZONE 3TM
NFPA 1971 COMPLIANT STRUCTURAL GOGGLE WITH WRAP-AROUND STRAP
ESS® (Eye Safety Systems) P.O. Box 1017, Sun Valley, ID 83353 USA
+1.208.726.4072 | +1.208.726.4563 (Fax) www.esseyepro.com | facebook.com/esseyepro | twitter: @esseyepro [email protected]
INNERZONE 3TM FEATURES
INNERZONE 3TM PRODUCT DETAIL
Nomex® HeatSleeveTM
Optional protection for goggle & lens, guards against
scratches & heat
Wrap-around Strap System
Secures with two Velcro® tabs to any type of helmet and allows goggles to be stowed on
the front of a helmet
PPE ComplianceThe Innerzone 3TM is compliant
with U.S. Federal OSHA,ANSI Z87.1+, CE EN 166,
and NFPA 1971-2007, including the 500°F for
5-minute oven test
ESS ProtectionESS’ extra-thick Polycarbonate lenses resist impacts—in this case blasts from a 12-gauge shotgun firing #6-shot from
10 meters—dimpling but not penetrating the lenses
Roomy Frame FitsOver Most
Prescription Eyewear
Full-perimeter Ventilation &
Filtration System
Patented Speed-ClipTM System For Quick Strap Adjustment
Advanced ClearZoneTM FlowCoat Anti-fog & Anti-scratch Lens
Coatings