influence of dbd plasma modification in the dyeing process of polyamide fernando ribeiro oliveira...
Post on 19-Dec-2015
219 views
TRANSCRIPT
![Page 1: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/1.jpg)
1
INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING
PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira
Textile Engineering DepartmentUniversity of Minho, Guimarães/Portugal
Semana da Engenharia UMA ESCOLA A
REINVENTAR O FUTURO 24-27 Outubro de 2011
![Page 2: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/2.jpg)
2
Presentation Outline
ObjectivesIntroduction
– What is Plasma?
– DBD Plasma Machines
Materials and MethodsResults and DiscussionsConclusions
![Page 3: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/3.jpg)
3
Objectives
1. To study the physical and chemical surface modifications on polyamide 6.6 after DBD plasma treatment.
2. To dye these fabrics (untreated and plasma treated) with non conventional dye regarding polyamide (direct dye).
3. To verify the dyeing behaviour (exhaustion, fixation, kinetics and washing fastness).
![Page 4: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/4.jpg)
4
Plasma is described as the fourth state of matter and is often defined as a partly or fully ionized gas.
Gas Diagram
Plasma Diagram
What is Plasma?
![Page 5: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/5.jpg)
Sir William Crookes was the first to, in 1879, identify a fourth state of matter where the individual atoms break apart into electrons and positively charged ions.
Plasma is the dynamic mixture of energetic species such as ions, electrons, free radicals, excited atoms, molecular and polymeric fragments, ultraviolet, visible and Infra-Red photons.
Plasma
Dep. Engenharia Têtxtil
![Page 6: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/6.jpg)
DBD Plasma consists on the application of an electrical discharge of high voltage (around 10.000V) through air between two electrodes, using frequencies around 40kHz, at normal atmospheric, temperature and pressure, on dry material, moving continuously at controlled velocity.Several researchers have explored the use of plasma technology to study the dyeing behaviour of several textile materials, such as (PET, PA, PAC, AC, CO, PP, JUTE....).
Plasma
Dep. Engenharia Têtxtil
![Page 7: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/7.jpg)
7
Semi-Industrial DBD PrototypeInstalled at Textile Department, University of Minho
Prototype “Lisboa-Softal” adapted to work in continuous
for woven and knitted fabrics with 50 cm width.
![Page 8: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/8.jpg)
8
Continuous DBD MachineInstalled in Lameirinho SA - Portugal
Patent University Minho/Softal PCT/PT 2004/000008 (2004)
![Page 9: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/9.jpg)
9
Materials and Methods
Fabrics
Weft density (thread/cm)
Warp density (thread/cm)
Specific weight (g/m2)
Yarn count Weft (Tex)
61 95 135
8 18 37
Yarn count Warp (Tex) 8 8 18
42 – PA 6.6 42 – PA 6.6 40 – PA 6.6
32 – PA 6 30 – PA 6.6 18 – PA 6.6
Dye Commercial Name: Sirius Orange 3GDL
PA1 PA2 PA3
![Page 10: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/10.jpg)
Power (W) Passages Numbers
Velocity (m/min) Dosage (W.min/m2)
1000 1 4,0 5001000 2 4,0 10001000 3 4,0 15001000 4 4,0 20001000 5 4,0 25001000 6 4,0 30001000 7 4,0 35001000 8 4,0 40001000 9 4,0 4500
Dosage = (Power x Number of passage) / (Velocity x 0,5m)
10
Materials and Methods
![Page 11: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/11.jpg)
11
Scanning Electron MicroscopyUltra-high resolution Field Emission Gun Scanning Electron Microscopy (FEG-SEM), NOVA 200 Nano SEM;
Atomic Force MicroscopyA multimode SPM microscope controlled by a Nanoscope III; (Ra) - average surface roughness(Rq) – rootmean-square surface roughness
Energy Dispersive SpectroscopyEDAX Si(Li) detector and aceleration of 5kV;
Materials and Methods
Dep. Engenharia Têtxtil
![Page 12: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/12.jpg)
12
X-Ray Photoelectron SpectroscopyVG Scientific ESCALAB 200A equipment;
Contact Angle Measurement Dataphysics equipment using OCA software;
Conductivity and pH of Aqueous ExtractWTW pH meter 538;
Materials and Methods
Dep. Engenharia Têtxtil
![Page 13: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/13.jpg)
13
Dyeing Method
0 20 40 60 80 100 1200
20
40
60
80
100
120
1
4
2
3
5 6 7 8 9
10
Time (min)
Te
mp
era
ture
(ºC
)
Dyeing tests were performed for different temperatures (80ºC and 98ºC).Dye concentrations owf (1%, 2% and 3%). All the samples were dyed with a liquor ratio of 40:1. The pH of dye solution was between 4.5 and 5.0.No auxiliaries reagents were used.
1 – 10 Samples taken during dyeing process.
Materials and Methods
Dep. Engenharia Têtxtil
![Page 14: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/14.jpg)
14
Color Strength (K/S) on Dyed Fabric
Datacolor Spectraflash SF 600 Plus CT spectrophotometer for D65 illuminant and 10º observer;
Washing Fastness
Standard ISO 105 C06, method A1S;
R
RSK
2
)1(/
2
Materials and Methods
Dep. Engenharia Têtxtil
![Page 15: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/15.jpg)
Results and Discussion
15
SEM and AFM
Samples Ra (nm) Rq (nm) Rmax (nm)
Untreated 2.36 3.21 29.2
Treated 6.50 7.99 48.0
PA1 PA2 PA3
PA1TreatedUntreated
![Page 16: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/16.jpg)
16
Results and Discussion
Energy Dispersive Spectroscopy
AtomsPA 1
At (%)PA2
At (%)UT T UT T
Carbon 67.38 64.05 67.56 63.55Nitrogen 9.95 10.82 10.40 11.39Oxygen 22.67 25.13 22.04 25.06
Ratio O/C 0.33 0.39 0.33 0.39Ratio N/C 0.15 0.17 0.15 0.18
X-Ray Photoelectron Spectroscopy
SampleAt (%) Atomic Ratio
C O N O/C N/C
Untreated 74.67 17.75 7.58 0.23 0.10
DBD Treated 70.25 19.83 9.92 0.28 0.14
Oxygen Nitrogen Carbon
![Page 17: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/17.jpg)
17
Results and Discussion
Contact Angle Dosage
kW.min.m-2 0 0.5 1.0 1.5 2.0 2.5 3.0
PA1
PA2
instantaneous instantaneous instantaneous
PA3
instantaneous instantaneous
140.3º 82.6º
67.5º
83.1º 52.0º
44.4º
45.6º
29.3º
41.4º 39.6º
145.8º
55.3º
90.4º
53.4 153.0º 75.16º
![Page 18: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/18.jpg)
18
Results and DiscussionWetting time
Untreated 2500 W.min.m-20
50100150200250300350400450500
404
70
Polyamide 1
Ads
orpti
on time (s
)
Untreated 2500 W.min.m-20
1020304050607080
63
1
Polyamide 2
Ads
orpti
on time (s)
Untreated 2500 W.min.m-20
102030405060708090
77
1
Polyamide 3
Ads
ortio
n tim
e (s)
ST 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5234567
PA1 PA2Dosage kW.min.m-2
pH
ST 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.54080
120160200240
PA1 PA2Dosage kW.min.m-2Co
nduti
vity (m
V)
Conductivity and pH of aqueous extraction
![Page 19: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/19.jpg)
19
Results and Discussion
Dyeing – Influence of dosage applied
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.50
4080
120160200240280 Polyamide 1
1% 3%Dosage kW.min.m-2
K/S
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.50
4080
120160200240280 Polyamide 2
1% 3%Dosagem kW.min.m-2
K/S
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.50
4080
120160200240280 Polyamide 3
1% 3%Dosage kW.min.m-2
K/S
![Page 20: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/20.jpg)
20Without Treatment
With Treatment
Results and Discussion
1 2 3 4 5 6 7 8 9 100
25
50
75
100
125
150
Dyed at 98ºC - 2,5 kW.min.m-2Dyed at 80ºC - 2,5 kW.min.m-2
K/S
1 2 3 4 5 6 7 8 9 100
25
50
75
100
125
150
Dyed at 98ºC - 2,5 kW.min.m-2 Dyed at 80ºC - 2,5 kW.min.m-2
Dyed at 98ºC - Untreated Dyed at 80ºC - Untreated
K/S
Dyeing – Samples taken during dyeing process
Polyamide 1 Polyamide 2
Dyeing – Fluorescence Microscopy 1 – 22ºC 4 – 68ºC 5 – 80ºC 6 – 98ºC 7 – 98ºC 9 – 98ºC 10 – 70ºC
![Page 21: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/21.jpg)
21
Results and Discussion
Dyeing – Exhaustion
0.010.0
22.034.0
46.058.0
70.082.0
94.0106.0
118.00
20
40
60
80
100
PA2 - (2,5 Kw.min.m-2) - 2%PA2 - (Untreated) - 2%
Time (min)
% Exh
austi
on
0.010.0
22.034.0
46.058.0
70.082.0
94.0106.0
118.00
20
40
60
80
100
PA2 - (2,5 Kw.min.m-2) - 1%PA2 - (Untreated) - 1%
Time (min)
% Exh
austi
on
0.010.0
22.034.0
46.058.0
70.082.0
94.0106.0
118.00
20
40
60
80
100
PA2 - (2,5 Kw.min.m-2) - 3%PA2 - (Untreated) - 3%
Time (min)
% Exh
austi
on
99.7%99.7%
99.7%75.6%
99.7%96.9%
99.7%36.7%
99.7%75.9%
99.7%29.8%
![Page 22: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/22.jpg)
22
Results and Discussion
Dyeing – Washing Fastness
SamplesDye
Concentration (%)
AC CO PA PES PAC WO
Color Change
PA1 (Untreated - Treated)
1% 5 - 5 4/5 - 5 5 - 5 5 - 5 5 - 5 5 - 5 4/5 - 5
2% 5 - 5 4/5 - 5 5 - 5 5 - 5 5 - 5 5 - 5 5 - 5
3% 5 - 5 4 - 4 5 - 5 5 - 5 5 - 5 5 - 5 5 - 4/5
PA2 (Untreated - Treated)
1% 5 - 5 4/5 - 5 5 - 5 5 - 5 5 - 5 5 - 5 5 - 4/5
2% 5 - 5 4/5 - 4 5 - 5 5 - 5 5 - 5 5 - 5 4/5 - 4/5
3% 5 - 5 4/5 - 4 5 - 5 5 - 5 5 - 5 5 - 5 4/5 - 5
PA3 (Untreated - Treated)
1% 5 - 5 4/5 - 5 5 - 5 5 - 5 5 - 5 5 - 5 5 - 5
2% 5 - 5 4/5 - 4 5 - 5 5 - 5 5 - 5 5 - 5 5 - 5
3% 5 - 5 4/5 - 4 5 - 5 5 - 5 5 - 5 5 - 5 5 - 5
![Page 23: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/23.jpg)
Conclusions
SEM and AFM techniques detected an increase of roughness in polyamide fabrics treated with plasma.
According to EDS and XPS measurements, plasma reactions change the chemistry of the polyamide surface with an increase of polar groups with oxygen and nitrogen.
The treated polyamide fabrics showed significant improvement in wettability.
23
![Page 24: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/24.jpg)
Conclusions
The static contact angle and the wetting time values have a correlation with the dosage applied, higher dosage implies lower contact angle and lower time of water absorption.
Conductivity and pH of the aqueous extract show an increase of the polar groups at the surface after DBD plasma treatment.
Atmospheric plasma treatment is able to modify either chemically or physically the polyamide fibers.
24Dep. Engenharia Têtxtil
![Page 25: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/25.jpg)
Conclusions
All these modifications of the fiber led to a remarkable increase in dyeing rate and the equilibrium exhaustion was established in a much faster way and it reaches almost the maximum value.
When DBD treatment is applied to polyamide in the dyeing process, lower temperature, dye concentration and operation time can be used, which is an excellent opportunity to reduce costs in energy, dyes and chemicals, promoting sustainable solutions for industrial application.
25Dep. Engenharia Têtxtil
![Page 26: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/26.jpg)
Authors want to acknowledge:
for the financial support FCT - The Science and Technology Foundation of Portugal, for the
doctoral grant SFRH / BD / 65254 / 2009
Dep. Engenharia Têtxtil
![Page 27: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/27.jpg)
27
Thank you for your attention!
University of Minho, Guimarães / PortugalTextile Engineering [email protected]
Dep. Engenharia Têtxtil
![Page 28: INFLUENCE OF DBD PLASMA MODIFICATION IN THE DYEING PROCESS OF POLYAMIDE Fernando Ribeiro Oliveira Textile Engineering Department University of Minho, Guimarães/Portugal](https://reader038.vdocuments.mx/reader038/viewer/2022103123/56649d2d5503460f94a04ba8/html5/thumbnails/28.jpg)
28