Industrial Products Division

Taconic manufactures PTFE and silicone rubber coated fiberglass belts that offer exceptional release properties,

outstanding flexibility and superior temperature resistance. Our experienced team will assess your application and

find the right belting solution that offers high performance and maximum value.

Choosing the Right Belting Material

Key factors to consider:

u Temperature Range Our PTFE and silicone rubber coated belts can withstand continuous temperatures of

-100 °F to 500 °F (-73 °C to 260 °C).

u Pliability If the material is to track around pulleys that drive the belt, the diameter of the pulley is critical.

The smaller the roller, the more flexible the belt must be. Taconic’s thinner materials (0.010" and under) are more pliable than heavier coated fabrics.

u Release Qualities The surface finishes of our belts range from a rough, semi-porous finish to a super smooth surface.

u Strength (Tensile/Tear) Tensile and tear strength must be suitable for the load weight carried by the belt, its speed and

tension.

u Fabric Thickness For most conveying applications, .010 - .014" belts are preferred. Lighter, thinner belts (.003 -

.006") are employed in heat sealing applications that require superior flexibility and heat transfer properties, particularly in two-ply applications. Heavier, thicker belts (.015 - .042" are used in high strength/load carrying applications.

Taconic PTFE Fiberglass & Silicone Rubber Coated Belts

FeatureslDurabilitylTemperature ResistancelChemical ResistancelOptimal Release, even for wheat-based food productslDimensional Stability

ApplicationslFood ProcessinglPackaginglScreen PrintinglApparellPlastic Film LaminationlHeat SealinglRubber ProcessinglTextileslCarpet Fabrication

The advantages of PTFE and silicone rubber coatings on fiberglass fabric are as numerous as the

applications for which Taconic’s engineered fabrics are suited. PTFE coated fiberglass is lightweight,

durable and non-flammable as well as chemical and temperature resistant. It provides a nonstick

surface, dimensional stability, weather resistance and is also a good electrical/thermal insulator.

Silicone rubber coated fabric offers a tough coated surface with high flex and slip

coefficient properties. It is an excellent electrical insulator in harsh environments,

offers outstanding release properties as well as chemical and abrasion resistance.

Liquid Silicone Rubber (LSR) fabric offers a non-slip surface

and some grades are approved for direct food contact.

ApplicationslAerospace

lFood Processing

lQuick Service Restaurants

lChemical Processing

lPackaging

lAutomotive

lPVC Welding

lLamination

lComposite Molding

Taconic PTFE & Silicone Rubber Coated Fabrics

PTFE & Silicone Rubber Coated Fabric Typical ValuesWe offer fabric in several grades to cost effectively meet your application requirements.

Description Part NumberOverall

Thickness (inches)

Coated Weight (lbs/sq yd)

Tensile StrengthWarp/Fill (lbs/inch)

Tear Strength Warp/Fill (lbf)

Dielectric Strength

(volts/mil)

Operating Temp. Min/Max °F

FDA Compliant

Standard Widths (inches)

Premium Grade

7039 0.0029 0.26 105 / 75 3.0 / 2.0 1350 -100 / 500 Y 38, 50, 60

7059 0.0049 0.50 170 / 160 5.0 / 4.5 1100 -100 / 500 Y 40, 50, 60

7069-TW-GRN 0.0059 0.58 165 / 155 4.3 / 3.9 1200 -100 / 500 N 42

7069 0.0060 0.59 175 / 160 5.0 / 4.0 1200 -100 / 500 Y 40, 50, 60

7109 0.0095 1.00 325 / 180 12.0 / 8.0 850 -100 / 500 Y 37.5, 50, 60

7119 0.0105 1.09 300 / 175 10.0 / 7.0 700 -100 / 500 Y 44

7149 0.0140 1.44 450 / 275 15.0 / 10.0 550 -100 / 500 Y 37.5

7279 0.0250 1.98 410 / 600 25.0 / 20.0 225 -100 / 500 Y 110Heavy Weight Premium

Smooth A1048 0.0245 2.15 600 / 575 40.0 / 40.0 190 -100 / 500 N 126

Standard Grade

7038 0.0026 0.24 100 / 75 2.0 / 1.5 1350 -100 / 500 Y 38, 50, 60

7048 0.0036 0.35 150 / 75 4.0 / 2.0 1450 -100 / 500 Y 38

7058 0.0045 0.44 160 / 150 5.0 / 5.0 1000 -100 / 500 Y 40, 50, 60

7068 0.0055 0.55 170 / 165 4.5 / 4.0 1200 -100 / 500 Y 40, 50, 60

7108 0.0090 0.91 310 / 175 12.0 / 7.0 810 -100 / 500 Y 37.5, 50, 60

7148 0.0135 1.35 500 / 300 20.0 / 15.0 550 -100 / 500 Y 37

7208 0.0185 1.55 400 / 300 20.0 / 15.0 250 -100 / 500 N 140

7278 0.0245 1.76 425 / 500 50.0 / 55.0 210 -100 / 500 Y 110, 189

Mechanical Grade

7037 0.0025 0.22 95 / 70 3.5 / 2.5 1300 -100 / 500 N 38, 60

7057 0.0040 0.38 160 / 150 5.5 / 5.0 950 -100 / 500 N 40, 50

7107 0.0080 0.80 260 / 160 14.0 / 7.0 650 -100 / 500 N 37.5, 50

7147 0.0115 1.13 450 / 270 20.0 / 15.0 500 -100 / 500 N 37.5

Economy Grade

7036 0.0024 0.17 100 / 80 3.2 / 2.0 1200 -100 / 500 N 38, 40

7056 0.0040 0.34 145 / 140 6.5 / 6.0 900 -100 / 500 N 40

7106 0.0075 0.68 250 / 170 15.0 / 10.0 525 -100 / 500 N 37.5

10-69-128 0.0085 0.70 230 / 185 20.0 / 15.0 420 -100 / 500 N 44

7146 0.0105 0.95 335 / 235 30.0 / 15.0 375 -100 / 500 N 37.5

7226 0.0200 1.31 350 / 300 80.0 / 75.0 165 -100 / 500 Y 126

7356 0.0336 2.07 600 / 450 85.0 / 60.0 140 -100 / 500 N 72

Tac-Black™

7053 0.0046 0.45 170 / 150 4.5 / 3.5 800 -100 / 500 N 38

7063 0.0056 0.55 180 / 170 5.0 / 4.5 550 -100 / 500 N 37.5

7103 0.0090 0.91 300 / 190 15.0 / 10.0 350 -100 / 500 N 37, 50

7143 0.0140 1.36 425 / 325 20.0 / 15.0 180 -100 / 500 N 80

Crease & Tear Resistant

7054 0.0045 0.43 170 / 160 7.0 / 6.5 1000 -100 / 500 N 43, 56

7064 0.0050 0.50 180 / 175 10.5 / 8.5 850 -100 / 500 N 40

A924 0.0100 0.94 300 / 165 15.0 / 10.0 350 -100 / 500 Y 50

7274 0.0245 1.78 475 / 520 70.0 / 90.0 250 -100 / 500 N 72

Pigmented PTFE w/LSR on one side A1075 0.0095 0.79 155 / 145 3.5 / 3.2 N/A -100 / 450 Y 38

Silicone Rubber Coated Fiberglass Fabric

7102W 0.0093 0.63 74 / N/A N/A N/A -100 / 450 N 39

7152 0.0150 1.00 229 / N/A N/A N/A -100 / 450 N 39

7202R 0.0203 1.38 263 / N/A N/A N/A -100 / 450 N 38

7242 0.0220 1.40 285 / N/A N/A N/A -100 / 450 N 39

7231R 0.0230 1.51 350 / N/A N/A N/A -100 / 450 N 37.5

7322 0.0295 1.99 286 / N/A N/A N/A -100 / 450 N 39

7322R 0.0300 1.99 286 / N/A N/A N/A -100 / 450 N 39

7422W 0.0400 2.58 410 / N/A N/A N/A -100 / 450 N 39

Ant

i-Sta

tic

Tac-Black™

7053AS 0.0046 0.45 155 / 150 4.0 / 3.5 N/A -100 / 500 N 40

7063AS 0.0055 0.54 175 / 165 5.5 / 5.0 N/A -100 / 500 N 40

7103AS 0.0090 0.91 285 / 190 12.0 / 8.0 N/A -100 / 500 N 37, 50, 60

7143AS 0.0140 1.34 475 / 350 25.0 / 15.0 N/A -100 / 500 N 60

Kevlar® Black 7305KAS 0.0250 0.54 275 / N/A N/A N/A -100 / 500 N 126

Porous

7025 0.0023 0.12 60 / 55 N/A 1275 -100 / 500 Y 38, 50, 60

7115 0.0125 0.78 220 / 190 45.0 / 60.0 250 -100 / 500 N 104

7255 0.0291 0.82 170 / N/A N/A N/A -100 / 500 N 126

Ope

n M

esh

Glass Tan 7195 0.0200 0.93 300 / N/A N/A N/A -100 / 500 N 72

Kevlar® Gold 7305K 0.0250 0.58 275 / N/A N/A N/A -100 / 500 Y 126

Glass Black 7303 0.0330 0.88 230 / N/A N/A N/A -100 / 500 Y 84, 189

Glass Brown 7308 0.0330 0.88 230 / N/A N/A N/A -100 / 500 Y 84, 189

Glass Tan A970 0.0330 0.88 240 / N/A N/A N/A -100 / 500 Y 84, 189

Kevlar® Glass Brown A1087 0.0390 0.68 600 / N/A N/A N/A -100 / 500 N 42

Kevlar® Glass Gold 7305KG 0.0440 1.27 475 / N/A N/A N/A -100 / 500 N 137

Kevlar® is a registered trademark of E. I. du Pont de Nemours and CompanyThe data herein are averages based on the authoritative testing of several lot numbers. This information is intended for comparison purposes only.

Fabric GradesuPremium Featuring a heavy coating of PTFE that offers optimum release and durability, this grade is

designed for extreme environments where superior release and extended life are critical.

lReusable pan liners for cooking/baking

lLaminate separator sheets

lTortilla and pizza crust belts

lSpecialized heat sealing

lApplications where fabric weave impression is undesirable

uStandard Used in the widest range of applications due to its combination of high performance and

moderate price.

lRelease sheets on heat sealing machines and laminate presses

lNonstick surfaces for paints, adhesives and food products

lGaskets, seals and bearings for chemicals, oils and gases

lThermal insulation for high temperature and chemical resistant applications

lCovers for hot platens, chutes, hoppers and troughs

uMechanical With a medium coating of PTFE, this grade is preferred in applications where economy is

more important than maximum resistance to chemicals and solvents and where increased surface texture is useful.

lChemical resistant laboratory aprons

lProtective curtains for paint spraying and bottle washing, acid protection and food packaging

uEconomy Provides a light coating of PTFE for large volume applications that require cost-efficiency and high performance.

lLeaders for processing paper, plastics, metallic foils and cloth

lSeparator sheets for processing uncured rubber

lManufacturing of abrasive wheels

uPorous Bleeder & Filter Cloth Promotes drying by allowing airflow through the fabric. Available with a wide range of porosity and allows outgassing of volatile products.

lRelease cloth in vacuum molding

lFiltration

lPollution abatement

lStrainers

uOpen Mesh Fabric Used for belts to allow outgassing of volatile products and promote drying since airflow can move through the belt. These belts are ideal for curing and bonding inks, pigments and powders to fabrics and non-woven materials.

Rev. 07-15

800-833-1805www.4taconic.com

ISO 9001 Registered

Fabric Grades uTac-Black™ & Tac-Black™ Anti-Static/Conductive Fabric

Tac-Black™ is a pigmented fabric for use in applications where a natural fabric is not suitable. Tac-Black™ Anti-Static (AS) is provided with carbon loading which offers semi-conductive and anti-static properties.

lRelease sheets

lConveyor belts for fusing machines to bond woven and non-woven fabrics

uCrease & Tear Resistant Offers substantially higher tear strength and flexibility for high speed applications.

lHigh speed packaging belts

lEdge reinforcement for industrial belts in the packaging and plastics industries

uSilicone Rubber Coated Fiberglass Fabric Outstanding dielectric properties, superior release and high abrasion and flex resis-tance make silicone rubber coated fabrics ideal for demanding environments.

lElectrical insulation tapes and gaskets

lHeater covers

lSafety curtains

lConveyor belts for foam manufacturing, shrink tunnels and industrial processes

lRelease and separator sheets for viscous processes in the chemical, rubber, plastic, electrical and aerospace industries

uLiquid Silicone Rubber (LSR) Fabric A chemically inert fabric with excellent release properties that is available with liquid silicone rubber on both sides or with PTFE on one side and liquid silicone rubber on the other.

lDirect food contact applications

lNon-food contact applications

The advantages of PTFE and silicone rubber coatings on fiberglass fabric are as numerous as the

applications for which Taconic’s engineered fabrics are suited. PTFE coated fiberglass is lightweight,

durable and non-flammable as well as chemical and temperature resistant. It provides a nonstick

surface, dimensional stability, weather resistance and is also a good electrical/thermal insulator.

Silicone rubber coated fabric offers a tough coated surface with high flex and slip

coefficient properties. It is an excellent electrical insulator in harsh environments,

offers outstanding release properties as well as chemical and abrasion resistance.

Liquid Silicone Rubber (LSR) fabric offers a non-slip surface

and some grades are approved for direct food contact.

ApplicationslAerospace

lFood Processing

lQuick Service Restaurants

lChemical Processing

lPackaging

lAutomotive

lPVC Welding

lLamination

lComposite Molding

Taconic PTFE & Silicone Rubber Coated Fabrics

PTFE & Silicone Rubber Coated Fabric Typical ValuesWe offer fabric in several grades to cost effectively meet your application requirements.

Description Part NumberOverall

Thickness (inches)

Coated Weight (lbs/sq yd)

Tensile StrengthWarp/Fill (lbs/inch)

Tear Strength Warp/Fill (lbf)

Dielectric Strength

(volts/mil)

Operating Temp. Min/Max °F

FDA Compliant

Standard Widths (inches)

Premium Grade

7039 0.0029 0.26 105 / 75 3.0 / 2.0 1350 -100 / 500 Y 38, 50, 60

7059 0.0049 0.50 170 / 160 5.0 / 4.5 1100 -100 / 500 Y 40, 50, 60

7069-TW-GRN 0.0059 0.58 165 / 155 4.3 / 3.9 1200 -100 / 500 N 42

7069 0.0060 0.59 175 / 160 5.0 / 4.0 1200 -100 / 500 Y 40, 50, 60

7109 0.0095 1.00 325 / 180 12.0 / 8.0 850 -100 / 500 Y 37.5, 50, 60

7119 0.0105 1.09 300 / 175 10.0 / 7.0 700 -100 / 500 Y 44

7149 0.0140 1.44 450 / 275 15.0 / 10.0 550 -100 / 500 Y 37.5

7279 0.0250 1.98 410 / 600 25.0 / 20.0 225 -100 / 500 Y 110Heavy Weight Premium

Smooth A1048 0.0245 2.15 600 / 575 40.0 / 40.0 190 -100 / 500 N 126

Standard Grade

7038 0.0026 0.24 100 / 75 2.0 / 1.5 1350 -100 / 500 Y 38, 50, 60

7048 0.0036 0.35 150 / 75 4.0 / 2.0 1450 -100 / 500 Y 38

7058 0.0045 0.44 160 / 150 5.0 / 5.0 1000 -100 / 500 Y 40, 50, 60

7068 0.0055 0.55 170 / 165 4.5 / 4.0 1200 -100 / 500 Y 40, 50, 60

7108 0.0090 0.91 310 / 175 12.0 / 7.0 810 -100 / 500 Y 37.5, 50, 60

7148 0.0135 1.35 500 / 300 20.0 / 15.0 550 -100 / 500 Y 37

7208 0.0185 1.55 400 / 300 20.0 / 15.0 250 -100 / 500 N 140

7278 0.0245 1.76 425 / 500 50.0 / 55.0 210 -100 / 500 Y 110, 189

Mechanical Grade

7037 0.0025 0.22 95 / 70 3.5 / 2.5 1300 -100 / 500 N 38, 60

7057 0.0040 0.38 160 / 150 5.5 / 5.0 950 -100 / 500 N 40, 50

7107 0.0080 0.80 260 / 160 14.0 / 7.0 650 -100 / 500 N 37.5, 50

7147 0.0115 1.13 450 / 270 20.0 / 15.0 500 -100 / 500 N 37.5

Economy Grade

7036 0.0024 0.17 100 / 80 3.2 / 2.0 1200 -100 / 500 N 38, 40

7056 0.0040 0.34 145 / 140 6.5 / 6.0 900 -100 / 500 N 40

7106 0.0075 0.68 250 / 170 15.0 / 10.0 525 -100 / 500 N 37.5

10-69-128 0.0085 0.70 230 / 185 20.0 / 15.0 420 -100 / 500 N 44

7146 0.0105 0.95 335 / 235 30.0 / 15.0 375 -100 / 500 N 37.5

7226 0.0200 1.31 350 / 300 80.0 / 75.0 165 -100 / 500 Y 126

7356 0.0336 2.07 600 / 450 85.0 / 60.0 140 -100 / 500 N 72

Tac-Black™

7053 0.0046 0.45 170 / 150 4.5 / 3.5 800 -100 / 500 N 38

7063 0.0056 0.55 180 / 170 5.0 / 4.5 550 -100 / 500 N 37.5

7103 0.0090 0.91 300 / 190 15.0 / 10.0 350 -100 / 500 N 37, 50

7143 0.0140 1.36 425 / 325 20.0 / 15.0 180 -100 / 500 N 80

Crease & Tear Resistant

7054 0.0045 0.43 170 / 160 7.0 / 6.5 1000 -100 / 500 N 43, 56

7064 0.0050 0.50 180 / 175 10.5 / 8.5 850 -100 / 500 N 40

A924 0.0100 0.94 300 / 165 15.0 / 10.0 350 -100 / 500 Y 50

7274 0.0245 1.78 475 / 520 70.0 / 90.0 250 -100 / 500 N 72

Pigmented PTFE w/LSR on one side A1075 0.0095 0.79 155 / 145 3.5 / 3.2 N/A -100 / 450 Y 38

Silicone Rubber Coated Fiberglass Fabric

7102W 0.0093 0.63 74 / N/A N/A N/A -100 / 450 N 39

7152 0.0150 1.00 229 / N/A N/A N/A -100 / 450 N 39

7202R 0.0203 1.38 263 / N/A N/A N/A -100 / 450 N 38

7242 0.0220 1.40 285 / N/A N/A N/A -100 / 450 N 39

7231R 0.0230 1.51 350 / N/A N/A N/A -100 / 450 N 37.5

7322 0.0295 1.99 286 / N/A N/A N/A -100 / 450 N 39

7322R 0.0300 1.99 286 / N/A N/A N/A -100 / 450 N 39

7422W 0.0400 2.58 410 / N/A N/A N/A -100 / 450 N 39

Ant

i-Sta

tic

Tac-Black™

7053AS 0.0046 0.45 155 / 150 4.0 / 3.5 N/A -100 / 500 N 40

7063AS 0.0055 0.54 175 / 165 5.5 / 5.0 N/A -100 / 500 N 40

7103AS 0.0090 0.91 285 / 190 12.0 / 8.0 N/A -100 / 500 N 37, 50, 60

7143AS 0.0140 1.34 475 / 350 25.0 / 15.0 N/A -100 / 500 N 60

Kevlar® Black 7305KAS 0.0250 0.54 275 / N/A N/A N/A -100 / 500 N 126

Porous

7025 0.0023 0.12 60 / 55 N/A 1275 -100 / 500 Y 38, 50, 60

7115 0.0125 0.78 220 / 190 45.0 / 60.0 250 -100 / 500 N 104

7255 0.0291 0.82 170 / N/A N/A N/A -100 / 500 N 126

Ope

n M

esh

Glass Tan 7195 0.0200 0.93 300 / N/A N/A N/A -100 / 500 N 72

Kevlar® Gold 7305K 0.0250 0.58 275 / N/A N/A N/A -100 / 500 Y 126

Glass Black 7303 0.0330 0.88 230 / N/A N/A N/A -100 / 500 Y 84, 189

Glass Brown 7308 0.0330 0.88 230 / N/A N/A N/A -100 / 500 Y 84, 189

Glass Tan A970 0.0330 0.88 240 / N/A N/A N/A -100 / 500 Y 84, 189

Kevlar® Glass Brown A1087 0.0390 0.68 600 / N/A N/A N/A -100 / 500 N 42

Kevlar® Glass Gold 7305KG 0.0440 1.27 475 / N/A N/A N/A -100 / 500 N 137

Kevlar® is a registered trademark of E. I. du Pont de Nemours and CompanyThe data herein are averages based on the authoritative testing of several lot numbers. This information is intended for comparison purposes only.

Fabric GradesuPremium Featuring a heavy coating of PTFE that offers optimum release and durability, this grade is

designed for extreme environments where superior release and extended life are critical.

lReusable pan liners for cooking/baking

lLaminate separator sheets

lTortilla and pizza crust belts

lSpecialized heat sealing

lApplications where fabric weave impression is undesirable

uStandard Used in the widest range of applications due to its combination of high performance and

moderate price.

lRelease sheets on heat sealing machines and laminate presses

lNonstick surfaces for paints, adhesives and food products

lGaskets, seals and bearings for chemicals, oils and gases

lThermal insulation for high temperature and chemical resistant applications

lCovers for hot platens, chutes, hoppers and troughs

uMechanical With a medium coating of PTFE, this grade is preferred in applications where economy is

more important than maximum resistance to chemicals and solvents and where increased surface texture is useful.

lChemical resistant laboratory aprons

lProtective curtains for paint spraying and bottle washing, acid protection and food packaging

uEconomy Provides a light coating of PTFE for large volume applications that require cost-efficiency and high performance.

lLeaders for processing paper, plastics, metallic foils and cloth

lSeparator sheets for processing uncured rubber

lManufacturing of abrasive wheels

uPorous Bleeder & Filter Cloth Promotes drying by allowing airflow through the fabric. Available with a wide range of porosity and allows outgassing of volatile products.

lRelease cloth in vacuum molding

lFiltration

lPollution abatement

lStrainers

uOpen Mesh Fabric Used for belts to allow outgassing of volatile products and promote drying since airflow can move through the belt. These belts are ideal for curing and bonding inks, pigments and powders to fabrics and non-woven materials.

Rev. 07-15

800-833-1805www.4taconic.com

ISO 9001 Registered

Fabric Grades uTac-Black™ & Tac-Black™ Anti-Static/Conductive Fabric

Tac-Black™ is a pigmented fabric for use in applications where a natural fabric is not suitable. Tac-Black™ Anti-Static (AS) is provided with carbon loading which offers semi-conductive and anti-static properties.

lRelease sheets

lConveyor belts for fusing machines to bond woven and non-woven fabrics

uCrease & Tear Resistant Offers substantially higher tear strength and flexibility for high speed applications.

lHigh speed packaging belts

lEdge reinforcement for industrial belts in the packaging and plastics industries

uSilicone Rubber Coated Fiberglass Fabric Outstanding dielectric properties, superior release and high abrasion and flex resis-tance make silicone rubber coated fabrics ideal for demanding environments.

lElectrical insulation tapes and gaskets

lHeater covers

lSafety curtains

lConveyor belts for foam manufacturing, shrink tunnels and industrial processes

lRelease and separator sheets for viscous processes in the chemical, rubber, plastic, electrical and aerospace industries

uLiquid Silicone Rubber (LSR) Fabric A chemically inert fabric with excellent release properties that is available with liquid silicone rubber on both sides or with PTFE on one side and liquid silicone rubber on the other.

lDirect food contact applications

lNon-food contact applications

Splices Taconic offers metallic, non-metallic, endless and open splices to accommodate your unique requirements.

u Endless Splices Material ends are

butted together and reinforced with a durable backing strip that provides a smooth working surface.

Alligator Lacing Clipper Lacing

u Non-Metallic Splices When metal lacing cannot be used, a fabric

notched splice, peek lacing, self loop or smart loop splice offers durability and flexibility. A smart loop splice or peek lacing is recommend-ed when maximum airflow is needed.

Fabric Notched Splice

Peek Lacing

Smart Loop Splice

Self Loop Splice

u Metallic Splices Alligator and clipper splices are the most durable and easy to use. Belts can be in-

stalled without taking machinery apart and a cover-flap can be added to these splices to reduce mark-off and heat transfer to your material.

Fabrication Options

Fabric Gradesu Premium These fabrics have a heavy coating of PTFE to provide the easiest release and the highest chemical resistance and electrical

strength. Preferred for applications where fabric weave impression is undesirable and sticky materials are conveyed.

u Standard Offering a smooth surface and excellent nonstick properties, this grade is the most widely used PTFE-Glass belt.

u Mechanical & Economy Light PTFE coating offers economy in applications where increased surface texture is useful.

u Crease & Tear Resistant This grade offers substantially higher tear strength for high speed applications.

u Anti-Static/Conductive Specially treated fabric reduces static build-up.

u Porous/Open Mesh These materials allow outgassing of volatile products and promote drying by allowing airflow through the belt. These belts are ideal for drying, curing and bonding inks, pigments and powders to fabrics and non-woven materials.

u Silicone Rubber Coated Fiberglass These belts offer excellent release properties up to 500 ˚F, superior abrasion, flex and chemical resistance and outstanding dielectric properties in demanding environments. Silicone belts are ideal in applications where high flexibility and a high slip coefficient are required. Available coated on one or two sides in red or white.

Material ends are cut straight or diagonally, over-lapped and heat sealed, providing a very durable seam.

Belt ends are tapered to minimize thickness at the splice area, overlapped and heat sealed.Butt Splice Overlap Splice Scarfed Splice

Edge ReinforcementsTaconic belts can be supplied with strips of heat-sealed film or fabric on one or both edges of your belt. This reinforcement serves a dual purpose: it reduces fraying of belt edges which rub on guiding rollers and it also provides the strongest possible anchor for guiding pins, snaps and grommets. Edge reinforcement is standard for belts with pins or grommets and for open mesh belts. After heat sealing, fabric edge strips can also be sewn for additional strength.

u Heat Sealed PTFE Film Edge PTFE film strips are heat sealed to the top and bottom edges of the belt for a 1/2" or 1" (standard) surface.

The PTFE film is available in 3 mil black or clear and 10 mil tan (1" surface only).

Tracking & Guiding DevicesTaconic offers a variety of options to guide belts on your machine. These devices can be placed on one or both edges of your belts.

0.055"

0.200"0.240"

0.800"

Two-Ply BeltsTwo plies of PTFE coated fiberglass are laminated together with staggered splices to provide a smooth, continuous thickness along the entire belt length. This guarantees a uniform seal in packaging and heat sealing applications. The belts are typically available in widths of ½" to 3".

u Heat Sealed Fabric Edge Six mil fabric is heat sealed to the top and bottom edges of the belt for a 1" (standard) or 2" surface. Fabric

edges are available either tan or black.

u Fabric Edge, Sewn & Sealed For extra reinforcement, our 6 mil heat-sealed fabric edge can also be sewn if desired. This reinforcement

is commonly used on open mesh belting.

u Grommets Nickel plated brass grommets

are offered in three sizes: .1875" I.D., .3125" I.D. and .375" I.D.

u Guide Snaps Nickel plated brass snaps

are available in .37" diameter and .12" deep.

u Silicone Rubber Guides A silicone rubber guide is also available to

assist with accurate tracking.

Taconic offers belts in custom widths to meet your specific requirements.

For added flexibility, belting materials are also supplied open ended for customers

who require this for installation. Hand-held heat sealing irons are available in two sizes

for on-site belt splicing. Please contact customer service for more information.

Description Part Number

Overall Thickness(inches)

Coated Weight

(lbs/sq yd)

Tensile Strength Warp/Fill (lbs/inch )

Tear Strength Warp/Fill

(lbf)

Maximum ContinuousOperating

Temp. °F/°C

Heavy Weight Belting

Premium Smooth

8039 0.0029 0.26 105 / 75 3.0 / 2.0 500 / 260

A952 0.0030 0.29 95 / 70 3.5 / 2.5 500 / 260

TL-7300 0.0070 0.70 200 / 150 13.0 / 11.0 500 / 260

8109 0.0095 1.00 325 / 180 12.0 / 8.0 500 / 260

A1139 0.0098 1.00 300 / 165 12.0 / 9.0 500 / 260

A1048 0.0245 2.15 600 / 575 40.0 / 40.0 500 / 260

Premium Textured 8279 0.0250 1.98 410 / 600 25.0 / 20.0 500 / 260

Standard Smooth

8038 0.0026 0.24 100 / 75 2.0 / 1.5 500 / 260

8108 0.0090 0.91 310 / 175 12.0 / 7.0 500 / 260

8148 0.0135 1.35 500 / 300 20.0 / 15.0 500 / 260

Standard Textured8208 0.0185 1.55 400 / 300 20.0 / 15.0 500 / 260

8278 0.0245 1.76 425 / 500 50.0 / 55.0 500 / 260

Economy Textured8226 0.0200 1.31 350 / 300 80.0 / 75.0 500 / 260

8356 0.0336 2.07 600 / 450 85.0 / 60.0 500 / 260

Porous 8115 0.0125 0.78 220 / 190 45.0 / 60.0 500 / 260

Crease & Tear Resistant Smooth

8054 0.0045 0.43 170 / 160 7.0 / 6.5 500 / 260

8064 0.0050 0.50 180 / 175 10.5 / 8.5 500 / 260

Crease & Tear Resistant Textured 8274 0.0245 1.78 475 / 520 70.0 / 90.0 500 / 260

Tac-Black™8103 0.0090 0.91 300 / 190 15.0 / 10.0 500 / 260

8143 0.0140 1.36 425 / 325 20.0 / 15.0 500 / 260

Tac-Black™ Anti-Static8103AS 0.0090 0.91 285 / 190 12.0 / 8.0 500 / 260

8143AS 0.0140 1.34 475 / 350 25.0 / 15.0 500 / 260

Silicone Rubber Coated8242 0.0220 1.40 285 / N/A N/A 500 / 260

8231R 0.0230 1.51 350 / N/A N/A 500 / 260

Description Part Number

Overall Thickness (inches)

Coated Weight

(lbs/sq yd)

Tensile Strength

Warp (lbs/inch)

Maximum Continuous Operating

Temp. °F/°C

Open Mesh Belting - PTFE/GlassGlass Tan 8195 0.0200 0.93 300 500 / 260

Glass Black 8303 0.0330 0.88 230 500 / 260

Glass Brown 8308 0.0330 0.88 230 500 / 260

Glass Tan A970 0.0330 0.88 240 500 / 260

Open Mesh Belting - PTFE/Kevlar® & Kevlar®/Glass

Kevlar® Gold 8305K 0.0250 0.58 275 500 / 260Kevlar® Black Anti-Static 8305KAS 0.0250 0.54 275 500 / 260

Kevlar®/Glass Brown A1087 0.0390 0.68 600 500 / 260

Kevlar®/Glass Gold 8305KG 0.0440 1.27 475 500 / 260

Ordering Your Taconic Belt Please have the following information available:

u Dimensions of belt (width and length)

u Desired splice, edge reinforcement and tracking devices, where needed

u Drive pulley recommendations: Minimum drive pulley diameter is 6" for heavy weight belting and 3" for all other materials

u Special instructions concerning belt fabrication (in cases of complex fabrication, a print may be requested)

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company

518-658-3202 / 1-800-833-1805www.4taconic.com

ISO 9001 Registered

Rev. 07-15

The data herein are averages based on the authoritative testing of several lot numbers. This information is intended for comparison purposes only.

Rev. 07-15