indoor water coolers, bottle fillers & drinking fountains · 2019. 10. 28. · leading manufacturer...
TRANSCRIPT
-
INDOOR Water Coolers, Bottle Fillers & Drinking Fountains
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com2
WHY MURDOCK?
Since 1853, Murdock Manufacturing has been a leading manufacturer of quality drinking fountains, hydrants, water coolers, bottle fillers and beach showers. Five generations of Murdock products are easily recognizable in any setting and application, including recreational and hospitality facilities, schools, office buildings, rail yards, and more. The Murdock brand name is known around the world and our family is proud to bring you the best in durable and long lasting water products!
TABLE OF CONTENTS4 Accessible Water Coolers 7 Water Coolers 9 Bottle Fillers
12 Fountains/Coolers with Bottle Fillers
14 Electric Drinking Fountains
16 Accessible and Recessed Models 18 Drinking Fountains
11 Refrigerated Bottle Fillers
-
stainless steel satin-
finish
fairway green
enviro-glaze®
alpine blue enviro-
glaze®
firehouse red enviro-
glaze®
granite
enviro-glaze®
stainless steel high-
polish
GREEN STATEMENTThe Green cUPC logo is a registered trademark of IAPMO. Products with the Green cUPC logo meet the most up-to-date standards for green building and water efficiency. Look for the Green cUPC icon on our products for added water savings!
LEAD-FREE STATEMENT
Lead-free laws that went into effect in January of 2014 require that any valve, fitting, or fixture coming in contact with potable water intended for human consumption must have a weighted average lead content of less than 0.25%.
Murdock Manufacturing is dedicated to manufacturing and providing drinking fountains, hydrants, water coolers and bottle fillers that comply with all lead-free requirements. Murdock’s entire product line is certified to the highest standards regarding lead levels, guaranteeing only the safest and most environmentally friendly sources of clean and refreshing drinking water.
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com 3
Murdock Manufacturing’s extensive line of drinking fountains, water coolers and bottle fillers are designed for use in a wide array of indoor applications where a readily accessible source of clean and refreshing drinking water is required. These applications include:
APPLICATIONS
FINISHES
Finishes not available on every product.
Visit www.murdockmfg.com to see all available color and finish options for our products.
Indoor gymnasiums Hotels, restaurants and nightclubs
Commercial office buildingsEducational buildings, schools and institutions
Residential buildings, apartments and homes
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com4
ACCESSIBLE WATER COOLERS
A171 Series - Enhanced Design
• Self-contained and vandal resistant with front pushbutton activation
• Flexible, anti-microbial non-squirt bubbler delivers 0.3 GPM flow
• Auto-stop allows cartridge and strainer service without shutting off water
• Granite powder coated galvanized steel cabinet and bottom shroud
• ADA compliant
Shown: A171108F Inset: A171408F
• Less Time: Routine maintenance takes 2 minutes.
• Less Maintenance: Access water shut off, cartridge, and filter from the front without removing the shroud!
• Less Expense: Fewer parts to repair and less expensive parts.
• Less Work: Universal rough-in will match existing footprints for easy retrofit.
• Water Shut Off: Patent Pending Auto Stop.
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com 5
A172 Series - Enhanced Design
• Bi-level construction, self-contained and vandal resistant with front pushbutton activation
• Can be installed left unit high or right unit high with no additional parts
• Flexible, anti-microbial non-squirt bubbler delivers 0.3 GPM flow
• Auto-stop allows cartridge and strainer service without shutting off water
• Granite powder coated galvanized steel cabinet and bottom shroud
• ADA compliant.
Shown: A172108F-UBL Inset: A172408F-UBL
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com6
ACCESSIBLE WATER COOLERS
A17-VRB SeriesShown: A171408S-VRB
• Granite powder coated steel cabinet for a soft look • Welded louver screens • Tamper resistant fasteners• Available as Single and Universal Bi-Level
A17-VR SeriesShown: A171408S-VR
• All-Stainless steel cabinet • Welded louver screens • Tamper resistant fasteners • Available as Single and Universal Bi-Level
A17FGVR SeriesShown: A171408S-FG-VR
• 14-gage stainless steel welded construction • Removable louver screens for internal access • Tamper resistant fasteners • Available as Single and Bi-Level
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com 7
A311 Series
Shown: A311108F
Inset: A311408F
• Attractive granite powder coated wall mount design
• Flexible anti-rotation, non-squirt bubbler• Optional hot water glass filler (-HGF)• ARI rated at 8 gallons/hour
WATER COOLERS
A511 Series
Shown: A511105F
Insert: A511405F
• Compact granite powder coated freestanding design
• Flexible anti-rotation, non-squirt bubbler• Optional hot water glass filler (-HGF)• ARI rated at 5 gallons/hour
A611 Series
Shown: A611108F
Insert: A611408F
• Attractive granite powder coated freestanding design
• Flexible anti-rotation, non-squirt bubbler• Copper tubing on stainless steel tank
evaporator • Optional hot water service• ARI rated at 8 gallons/hour
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com8
Custom wrapped bottle filler and drinking fountain with company logoETNA is a registered trademark of ETNA Supply
Custom wrapped drinking fountain with company logo
CUSTOM COLORSThirsty for some color? Custom color powder coats bond with Murdock’s seamless drinking fountains and bottle fillers for an eye-catching alternative that is built to last.
POWDERCOATED LOGOSFor a look that’s more personal, we can integrate personal powder coated logos on most any Murdock unit. Simply provide us with your team, company or personal logo for a truly unique drinking fountain.
CUSTOM COLORS & LOGOS
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com 9
BF2S
• Uses refrigerated water from host water cooler• Environmentally friendly design reduces plastic
bottle consumption• ADA compliant
A171408F Unit shown in optional custom powdercoated blue
1
2
3
4
5
1
2
3
4
5
FEATURES & BENEFITS (for BF2S)Powdercoated 18 gage stainless steel
Touch-free sensor activation.
1 gpm quick fill flow rate allows users to fill water bottles quickly.
Bottle counter displays the number of plastic bottles saved.
Laminar flow eliminates splash.
Optional filter.
Removable top for easy battery replacement.
Easy installation and maintenance.
Works with A171, VR and others
BOTTLE FILLERS
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com10
BOTTLE FILLERS
BF1
Shown: BF1
• One-station deck mount design • Uses refrigerated laminar flow
water from host water cooler• Constructed from granite powder coated galvanized steel• 100% lead and brass free and ADA compliant
BF2S
Shown: BF2S-BCD (with optional bottler counter display)
• Uses refrigerated water from host water cooler• Environmentally friendly design reduces plastic bottle consumption• Built-in bottle counter records the number of plastic bottles saved• ADA compliant
BF4
Shown: BF4
• Semi-recessed sensor activation• Constructed of vandal and ligature
resistant stainless steel• Features key latch and hinged door for
simple maintenance• ADA compliant with forward and side
reach requirements
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com 11
REFRIGERATED BOTTLE FILLERS
BF38
Shown: BF38
• Pushbutton operation delivers a 1.0 GPM flow rate
• Semi-recessed, can be mounted in a 4” or larger wall space for simple installation virtually anywhere
• Slim and trim, ligature and vandal resistant design blends into any environment
• Fabricated of type 304 stainless steel polished to a satin finish
• ADA compliant with forward and side reach requirements
• Integral 8 GPH chiller mounted below
BF48Shown: BF48
• Sensor operation delivers a 1.0 GPM flow rate• Can be mounted in a 4” or larger wall space for simple installation virtually anywhere• Slim and trim, ligature and vandal resistant design blends into any environment• Fabricated of type 304 stainless steel polished to a satin finish• ADA compliant with forward and side reach requirements• Integral 8 GPH chiller mounted below
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com12
DRINKING FOUNTAINS WITH BOTTLE FILLERS
A131 & 131.8 SeriesShown: A131400S-BF4-BCD Inset: A131408S-BF4-BCD
• 8 gage, type 304 stainless steel with a brushed finish• Activated by self-closing frontal push pads• Unique two-piece contoured round bowl • Integral P-trap, stainless steel bubbler and bottle filler• ADA compliant
A132W32 & A132.8W32 SeriesShown: A132400S-BF4-W32-BCD Inset: A132408SBF4-W32-BCD
• Wall mount bi-level construction• 18 gage, type 304 stainless steel with a brushed finish• Activated by self-closing frontal push pads• Integral P-trap, stainless steel bubbler and bottle filler• ADA compliant
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com 13
DRINKING FOUNTAINS WITH BOTTLE FILLERS
A151 & A151.8 SeriesShown: A151400S-BF4-BCD
Inset: A151408S-BF4-BCD
• Barrier free wall mount construction• 18 gage, type 304 stainless steel with a brushed finish• Unique two-piece contoured rectangular bowl• Integral P-trap, stainless steel bubbler and bottle filler• ADA compliant
A152 & A152.8 Series
Shown: A152400S-BF4-W32-BCD Insert (L to R): A152408S-BF4-W32-BCD A152400S-FG-BF4
• Barrier free wall mount bi-level construction • 18 gage, type 304 stainless steel with a brushed finish• Activated by self-closing frontal push pads• Integral P-trap, stainless steel bubbler and bottle filler• ADA compliant
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com14
A132.8 Series
Shown: A132408S-W32
• Bi-level wall mount 18-gage, type 304 stainless steel construction• Stainless steel bubbler and integral P-trap• ARI rated at 8 gallons/hour• ADA compliant
A131.8 Series
Shown: A131408S
• Wall mount 18-gage, type 304 stainless steel vandal resistant construction
• Polished stainless steel anti-rotation, non-squirt bubbler
• ARI rated at 8 gallons/hour• ADA compliant
ELECTRIC DRINKING FOUNTAINS
A152.8 Series
Shown: A152408S-W32
Insert: A152408S-FG-W32
• Wall mount 18-gage, type 304 stainless steel construction• Stainless steel bubbler and integral P-trap• ARI rated at 8 gallons/hour• ADA compliant
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com 15
A151.8 Series
Shown: A151408S
Inset: A151408S-FG
• Wall mount 18-gage, type 304 stainless steel construction• Polished stainless steel anti-rotation, non-squirt bubbler• ARI rated at 8 gallons/hour• ADA compliant
A481.8 & A481.8CUSP Series
Shown: A481408S-CUSP (drinking fountain & cuspidor - also available separately)
• Electric, vandal resistant design• 18-gage, type 304 stainless steel construction with 16-gage frame• Polished chrome plated brass, anti-rotation, non-squirt bubbler• Optional cuspidor available (-CUSP)• ARI rated at 8 gallons/hour
AI81 Series
Shown: A181408S
• Vandal resistant electric design is inverted for ADA compliance
• 18-gage, type 304 stainless steel construction with 16-gage frame
• Stainless steel bubbler• ARI rated at 8 gallons/hour
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com16
A131 Series
Shown: A131400S
• Round, wall mount design• Stainless steel anti-rotation, non-squirt bubbler and
integral P-trap• ADA compliant
ACCESSIBLE AND RECESSED MODELS
A181 Series Shown: A181400S-CUSP
(for drinking fountain & cuspidor - also available separately)
• 18-gage, 304 stainless steel cabinet with 16-gage frame• Stainless steel, non-squirt bubbler• Optional cuspidor (-CUSP)• ADA compliant
A132 Series
Shown: A132408S-W32
• 18-gage, type 304 stainless steel wall mount design with 32” back panel
• Stainless steel bubbler and integral P-trap• ADA compliant
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com 17
A152J Series
Shown: A152J00S
• Two contourted, white enamel coated cast iron box fountains• Resistant to sunlight, heat, moisture and wear• Stainless steel bubblers• ADA compliant
A152 & A152FG Series
Shown: A152400F-W32 Inset: A152400B-FG-W32
• 18-gage, type 304 stainless steel construction with 32” back panel• Bi-level wall mount contoured box fountains• Polished chrome plated brass bubblers and integral P-traps• 14-gage model available• ADA compliant
A151 & A151FG Series
Shown: A151400S
Insert: A151400S-FG
• Long contoured box style fountain constructed of 18-gage, type 304 stainless steel
• Polished chrome plated brass bubbler and integral P-trap• 14-gage model available
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com18
A441 & A441FG Series
Shown: A441400S Inset: A441400S-FG
• Short contoured box fountain constructed of 18-gage, type 304 stainless steel
• Stainless steel anti-rotational, non-squirt bubbler• Integral P-trap• 14-gage model available
A421 Series
Shown: A421400S
• Round fountain constructed of 18-gage, type 304 stainless steel• Stainless steel anti-rotational, non-squirt bubbler• Integral P-trap
A481 Series
Shown: A481400S-CUSP (for drinking fountain & cuspidor - also available separately)
• Recessed 18-gage, type 304 stainless steel construction with 16-gage frame• Stainless steel bubbler• Optional cuspidor (-CUSP)
DRINKING FOUNTAINS
-
Murdock Water Coolers & Drinking Fountains • 800.453.7465 • www.murdockmfg.com 19
A4A1 Series
Shown: A4A1400P
• Economical square 18-gage, type 304 stainless steel construction• Great choice for small spaces• Stainless steel pushbutton bubbler
A461 Series
Shown: A461400P
• Round bowl 18-gage, type 304 stainless steel construction• Stainless steel pushbutton bubbler
A4B1Series
Shown: A4B1400P
• Simple and economical 18-gage, type 304 stainless steel construction• Stainless steel non-squirt bubbler• Optional P-trap (-PT1)
-
L10013643-16
Innovative Spirit and Engineering Foundation
“What sets us apart from competitors is our engineering and spirit. We have a ‘can-
do’ spirit. If you ask us to do something, we will do it or figure out how to do it. That’s
the part our customers like, that’s the part we like.”
- Don Morris, President and CEO, Morris Group International
MORRIS GROUPINTERNATIONAL
brands built to last
A171408S Shown in Custom Dark Grey EG Powder Coated Surface Color
P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.
Tel 800-45-DRINK • 626-333-2543 • www.murdockmfg.com
Murdock® Hydration ProductsConservation through Engineering®