india - bharat petroleum...rejected/ bids may not be considered for technical evaluation. "in...

Material/Services required at:M/s. BHARAT PETROLEUM CORPN. LTDMUMBAI REFINERYMAHUL,MUMBAI - 400074India_______________________________________________________________________SUBJECT: BUILDING MODIFICATION WORK-SRR FOR GTU PROJECT AT BPCL, MUMBAIREFINERY.

You are invited to quote online through BPCL E-Procurement websitehttps://bpcleproc.in on "Two-Bid-Basis" for the subject work as per theenclosed Tender Documents.

Your quoted rates shall be inclusive of all applicable taxes and duties exceptMaharashtra VAT, Service Tax, Swachh Bharat Cess (SBC) and Krishi Kalyan Cess(KKC), which shall be quoted separately in attached Form-A. Please note thatsubmission of this FORM-A along with Technical / Unpriced Bid is mandatory.Your rates shall remain firm till completion of work. The applicability ofService Tax, Swachh Bharat Cess, Krishi Kalyan Cess and MVAT as a percentagerate of total quoted price shall be clearly mentioned in the Form-A. If theinformation is not provided, it will be assumed that Service Tax, SwachhBharat Cess, Krishi Kalyan Cess and MVAT is not applicable. No claim for theService Tax, Swachh Bharat Cess, Krishi Kalyan Cess and MVAT will beentertained subsequently.

Service Tax, Swachh Bharat Cess, Krishi Kalyan cess and MVAT shall be paidafter verifiying Service tax registration number and MVAT TIN number ininvoice. Break up of basic cost, Service tax, SBC, KKC, MVAT shall be providedin all your invoices along with service tax registration number, MVAT TINnumber, category of Taxable service (service tax category), type of companyand address/ source of supply of material.

Any statutory variation in Service Tax, Swachh Bharat Cess, Krishi Kalyan Cessand MVAT within the contractual completion period shall be to BPCL account,against submission of documentary evidence for substantiating the variation byway of relevant notification. However in case of delay in completion periodbeyond the contractual date, for reasons attributable to contractor, anyincrease in these rates shall be borne by the contractor, whereas any decreasein rates shall be passed on to the owner.

VALIDITY : Your quotation shall be valid for period of 120 Days from the

To,M/s. BPCL ESTIMATEMUMBAI . India - 400038.Ph:,Fax:.Vendor Code:300648

Quotation Due Date/Time:28.04.2017/12:00:00

For Bharat Petroleum Corporation Ltd.Vendor Sign & Stamp

REQUEST FOR QUOTATION Collective RFQ Number/ Purchase Group 1000279201 / N28-GTU SER PROC Contact person/Telephone SINARE ANUP/0222553-3269 Fax : - Email:[email protected] Our ref.:

RFQ No/Date: 6001043675 / 14.04.2017

of 128

Quotation due date/ extended due date whichaver is later.

Submission of tenders on line:

Bidders are requested to submit / upload their UNPRICED & PRICED BIDS alongwith all required documents, on or before the due date by 12.00 hrs., on BPCLE-Procurement website https://bpcleproc.in maintained by M/s. E-procurementTechnologies Ltd. For submitting the digitally signed copy of the unpricedtender documents as token of acceptance, bidders are required to put tick markagainst tender documents in the "Bid common forms" of the E-Tender. In casenothing is mentioned regarding acceptance of the documents in separateattachment titled 'DEVIATIONS', it will be assumed that all tender documentsare acceptable to the bidders. In case of any discrepency between SOR detailsin RFQ document and SOR document of E-tender, the details in RFQ documentshall supersede.

For any assistance regarding online submission of bids on BPCL E-Procurementweb site, you may contact ON +91-22-65354113, 65595111, on all working days(Mon - Fri) between 0900 hrs to 1700 hrs.

Hard copies of the bids shall not be submitted, unless specially asked for byBPCL and the same if submitted shall not be considered for evaluation. ThePRICED BID shall be submitted online as per the pricing format given.

DEVIATION :

You are requested to have all your queries clarified before bidding. However,if you still have deviations from our RFQ and the attachments (specifications/ scope of work / Drawings ) etc. please indicate deviations in your offerunder a separate attachment titled 'DEVIATIONS' giving reference to RFQ clauseno. Deviations appearing in separate attachment of the E-Tender titled'DEVIATIONS' shall only be considered while evaluating the offer. In casethere are no deviations, please submit "NIL DEVIATIONS". Deviations mentionedelsewhere shall not be considered for evaluation.

NEFT PAYMENT:

Payments to contractors etc. shall be made by National Electronic FundTransfer (NEFT) only. Payment by cheque will be made only to those vendorswhose bank is located in the city where NEFT payment facility is presently notavailable. Bids received from vendors who are not accepting the NEFT paymentterms are likely to be rejected.

MSME CLAUSE:

Owner reserves its right to allow Public Sector Enterprises (Central/ State),purchase preference as admissible/ applicable from time to time under theexisting Government policy. Purchase preference to a PSE shall be decidedbased on the price quoted by PSE as compared to L1 Vendor at the time ofevaluation of the price bid.

To:M/s. BPCL ESTIMATE MUMBAI - 400038 India (300648)

For Bharat Petroleum Corporation Ltd.Vendor Sign & Stamp of 128

Clause regarding purchase preference to Micro and Small Enterprises

Owner reserves its right to allow Micro and Small Enterprises (MSEs) and MSEsowned by Scheduled Caste (SC) or the Scheduled tribe (ST) entrepreneurs,purchase preference as admissible/ applicable from time to time under theexisting Government policy. Purchase preference to a MSE and a MSE owned bySC/ ST entrepreneurs shall be decided based on the Net Evaluated Price quotedby the said MSEs as compared to L1 Vendor at the time of evaluation of theprice bid, in case the contract is divisible. Bidders claiming purchasepreference as MSE need to submit the following documents:a. Notarized copy of all the pages of the EM-II certificate issued by theappropriate authorities mentioned in the Public procurement policy ofMSEs-2012.b. Vendors' declaration on a duly notarized Rs.100 stamp paper stating that,in the event of award of contract, all the ordered supplies shall be made fromthe unit for which MSE certificate has been submitted.

The photocopy of the Valid MSE registration with any notified body specifiedby ministry of micro, small and medium enterprises should accompany the biddocuments. Failing which no price preference will be considered in such cases.

The Net Evaluated Price is the all inclusive delivered price.Net Evaluated Price = Quoted Basic Price + Excise duty + Freight +local taxesand duties+ Octroi Charges and /or entry tax less Cenvat Benefits on Exciseand Input Tax Credit on VAT.

Clause regarding ISO Certification and adherence:

BPCL Mumbai Refinery is an ISO:50001:2011 certified Refinery and is focused onenergy efficiency. In line with the same, all contractors providing servicesfor BPCL Mumbai Refinery should preferably deploy energy efficient equipmentssuch as energy efficient welding machines, LED / CFL temporary lighting andtemporary window AC of BEE 4-star rating and above for execution of the work.

Please submit folowing details in the E-Tender attachment titled "reply ofpoint no.13 of special safety conditions" along with techno-commercial bid:-

a) Complete work injury records per year for the last three years.b) Total man-hours worked per year for the last three years.c) Safety assurance plan.d) No. of supervisorse) No. of skilled workmenf) No. of unskilled workmen

In case, reply to Point No.13 is not submitted, bids are likely to berejected/ bids may not be considered for technical evaluation.

"In the event of award of contract, bidders to note that the executed



quantities of the SOR items may vary +/- any percentage. In case of change inL-1 status based on concluded executed quantities, the L1 bidder shall offernecessary discount to BPCL to ensure their L1 status".

In case of any clarification, please contact BPCL , Mr. Gunesh Sawant, Tel-022-25524363 or Mr. Nagaraja M. N., Chief Manager Projects on Tel-022-25533359 Extn : 3359.---------------------------------------------------------------The details of IEM (Independent External Monitor) as mentioned in section 8 ofour Integrity pact attached:

Name of IEM: Shri. Brahm DuttAddress: A-1/8 Safdarjung Enclave, New Delhi-110 029.Mobile: 09871920282.E-Mail: [email protected]

The details of Purchasing / Procuring Officer:

Name of procuring officer: Mr. Anup Sinareoffice address : P&CS Department, Admin Building, BPCL, Mahul Refinery, Mumbai-400074.Contact Details : Ext. 022-25523269, Mo. 9619327662.______________________________________________________________________________________________________________________________________________

Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________

00010 GTU SRR - Arch and Civil Works 07.05.2017_______________________________________________________________________ The item 00010 covers the following services:Informatory item_______________________________________________________________________ 10 /A000.00.00 LS

ARCHITECTURE (Lumpsum) _________________________________________________________________

Service Item 10: Unit basic rate in words ________________________________

______________________________________________________________________________________________________________________________________________Informatory item_______________________________________________________________________ 20 /A002.00.00 LS

FLOOR FINISHING (Lumpsum) _________________________________________________________________



Heavy duty flooring (Lumpsum) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 /A002.03.01 60 M2

P/L 50mm thick heavy duty flooring (Square meter) _________________________________________________________________

Providing and laying average 50mm thick heavy dutyflooring in panels consisting of base course of 35mmthick cement concrete (1 cement : 1.5 coarse sand : 3.5stone aggregates of 10mm to 6mm size by volume) laidover sub-base and 15mm thick finishing layer consistingof cement and integral hardening compound mixed inratio of 4 cement :1 hardenar (by weight) :2 stoneagrgregates of 6mm and down size laid integral with basecourse and finished smooth including cleaning the subbasesurface, applying neat cement slurry @2.75 Kg ofcement per Sq.M of area over sub-base to receive thebase course, levelling, tamping, trowelling, finishing,curing, providing shuttering to the edges etc. all complete _________________________________________________________________



P/L 125mm high cement plaster skirting w (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 /A002.04.01 50 M

18mm thick. cement supplied by contracto (Meter) _________________________________________________________________

Providing and laying 125mm high cement plaster skirtingwith 1:3 cement mortar (1 cement : 3 coarse sand byvolume) finished with a floating coat of neat cement slurry@ 2.75kg. of cement per Sq.M of area including roundingof junctions with floor, preparing the wall surface, makingrecess in the wall, finishing, curing etc. all complete. _ _________________________________________________________________






P/F panel dividers in flooring/dado (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 80 /A002.06.05 100 M

P.V.C. panel dividers (3mm x 35mm size) (Meter) _________________________________________________________________

Providing and fixing panel dividers in flooring/dadoincluding maintaining slope, line, chipping of the unevenbase, grinding etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 /A002.06.06 190 M

P.V.C. panel dividers (3mm x 40mm size) (Meter) _________________________________________________________________

Providing and fixing panel dividers in flooring/dadoincluding maintaining slope, line, chipping of the unevenbase, grinding etc. all complete. _________________________________________________________________



Tiles in flooring , dado, skirting etc. (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 110 /A002.11.05 16 M2

300mm x 300mm x 8mm; non slip ceramic ti (Square meter) _________________________________________________________________

Providing and laying tiles in flooring , dado, skirting etc. inapproved colour, design and pattern, laid over andincluding a coating of approved adhesive as permanufacturers specifications, flush pointing of joints oftiles with cement paste/ grouting with white cement and



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________pigment (conforming to IS:2114, Table-1, matching theshade of tiles) finishing, cleaning etc. all complete.Ceramic, matt finished non-slip type tiles of approvedmake and shade(s) in approved design/ pattern includingcleaning the finished surface with oxalic acid, waxpolishing etc. for size 300mm x 300mm x 8mm (+/-5%)thick tiles for flooring. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 /A002.11.06 75 M2

300mm x 450mm x 8.5mm; ceramic tile (Square meter) _________________________________________________________________

Providing and laying tiles in flooring , dado, skirting etc. inapproved colour, design and pattern, laid over andincluding a coating of approved adhesive as permanufacturers specifications, flush pointing of joints oftiles with cement paste/ grouting with white cement andpigment (conforming to IS:2114, Table-1, matching theshade of tiles) finishing, cleaning etc. all complete.Ceramic, matt/ glazed/ semi-glazed finished tiles ofapproved make & shade(s) in approved design/ patternincluding cleaning the finished surface with oxalic acid,wax polishing etc. for size 300mm x 450mm x 8.5mmthick (minimum) tiles _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 130 /A002.11.07 25 M2

600mm x 600mm x 10mm; double charge vitr (Square meter) _________________________________________________________________

Providing and laying tiles in flooring , dado, skirting etc. inapproved colour, design and pattern, laid over andincluding a coating of approved adhesive as permanufacturers specifications, flush pointing of joints oftiles with cement paste/ grouting with white cement andpigment (conforming to IS:2114, Table-1, matching theshade of tiles) finishing, cleaning etc. all complete.Decorative, matt/ mirror finish homogeneous doublecharge Vitrified porcelain tiles of minimum size 600mm x600mm x 10mm thick in approved quality, colour, make,design/ pattern _________________________________________________________________






Smooth finished granite (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 /A002.21.01 100 M2

P/L min 18mm thk polished granite stone (Square meter) _________________________________________________________________

Providing and laying smooth Granite stone slabs,of thickness minimum 18 mm, in flooring, landing, tread,ramps, wash basin platform, over minimum 20mm thick cement mortor1:4 (1cement:4 course sand by volume) over and including a bed of cement mortar oradhesive as per site requirement including preparing the base surface,applying neat cement slurry @ 2.75 kg. of cement per sq. mtr. of area toreceive the mortar bed, jointing each slab with neat cement paste/ grout withwhite cement mixed with pigment (conforming to IS:2114,(Table-1) to match the colour of the granite stone slabs,finishing etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 160 /A002.23.00 50 M

EXTRA for Round nosing/moulding/grooves (Meter) _________________________________________________________________

Providing 3 nos. of 3mm grooves at spacing of 30mm inKota/ Marble/ granite stone laid in stairs¿ treads/ landingsall complete as per the direction of Engineer-In-Charge.(Single measurement shall be considered for 3 parallelgrooves) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 170 5 M2

Etching Film on Glass (Square meter) _________________________________________________________________



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Providing itching on the glass in the permanent itching / removable itchingsctickers as directed by Engineer in charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 180 5 M2

PVC Doors (Square meter) _________________________________________________________________

Providing and fixing PVC door of approved make such as sintex or equivalentincluding frame and fittings for bathrooms and toilets. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 190 /A003.07.01 2 EA

P/F Heavy duty hydraulic door close (each) _________________________________________________________________

Providing and fixing in position following items includingall necessary fixtures, fittings, finishing etc. all complete._Approved make heavy duty overhead hydraulic doorcloser with adjustable spanners, metal screws etc.conforming to IS : 3564 _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 /A003.07.04 10 EA

P/F Heavy duty floor mounted door closer (each) _________________________________________________________________

Providing and fixing in position following items includingall necessary fixtures, fittings, finishing etc. all complete.

Approved make heavy duty hydraulically operated,adjustable floor mounted door closer conforming to IS:6315, Double action type. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 210 /A003.07.05 10 EA

Zinc alloy, chromium plated door handle (each)




_________________________________________________________________Providing and fixing in position following items includingall necessary fixtures, fittings, finishing etc. all complete.

Approved make pressure die cast zinc alloy, chromiumplated door handle. 150mm long _

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 220 /A003.07.09 5 EA

Anodized aluminium aldrop 300mm long, 19 (each) _________________________________________________________________


Approved quality anodized aluminium aldrop 300mmlong, 19.05mm dia in bronze colour. _

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 230 /A003.07.10 5 EA

Anodized aluminium tower bolts 250 x 1 (each) _________________________________________________________________


Approved quality anodized aluminium tower boltsconforming to IS-204 in Bronze colour, 250 x 10mm. _

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 /A003.07.13 2 EA

75mm long aluminium toilet door latch (each) _________________________________________________________________


Approved quality 75mm long aluminium toilet door latch



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________with vacant/occupied indicator. _

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 250 /A003.07.14 2 EA

Chromium plated brass coat and hat hook (each) _________________________________________________________________


Approved quality chromium plated brass coat and hathook fixed with chromium plated brass screws. _ _________________________________________________________________



STEEL/AL./GLAZED/FULLY GLASS/PVC DOORS,W (Lumpsum) _________________________________________________________________



Pressed steel sheet door shutter (Lumpsum) _________________________________________________________________ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 280 /A004.12.03 3 M2

Single shutter with Electrostatic powder (Square meter) _________________________________________________________________

STEEL/ ALUMINIUM/ GLAZED/ FULLY GLASS/ PVCETC. DOORS, WINDOWS AND VENTILATORS

Providing and fixing pressed steel sheet door shuttermade of 18 SWG galvanized pressed steel sheet bent toform hollow box of 40 mm overall thickness; andconsisting of/ including:



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________(i) 3 mm thick MS flat all along perimeter(ii) Packing the shutter with mineral wool (48 kg/cum)without gap(iii) Strengthening with 18 SWG GI vertical stiffeners@200 c/c(iv) 3 mm thick MS pad plates welded inside at requiredlocations for fixing of hardware etc.(v) Fixing to door frame by 100 mm long SS 304 gradeheavy duty ball bearing hinge @600 c/c maximum(vi) Hardware and vision panel as required.(vii) Grinding and smoothening of welding, cleaning,finishing (synthetic enamel painting/ polyurethane (PU)coating/ electrostatic powder coating), making truealignments and surfaces etc. all complete.Notes:1. Reference shall be made to EIL standard nos. 7-75-0070, 7-75-0071Only the net shutter(s) area shall be measured forpayment.Single shutter painted with Electrostatic powder coatingwith following hardware:(i) Over head hydraulic door closer (heavy duty).(ii) SS 304 grade 16 mm dia 250mm long aldrop on bothsides of shutter.(iii) Spring loaded heavy duty door stopper(iv) SS 304 grade 19 mm dia.200 mm long handle onboth side of shutter.(v) 10 mm dia SS 304 tower bolt (250mm long for2100mm height & 600mm long for 2500mm height) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 290 /A004.12.06 8 M2

Double Shutter with Electrostatic powder (Square meter) _________________________________________________________________

STEEL/ ALUMINIUM/ GLAZED/ FULLY GLASS/ PVCETC. DOORS, WINDOWS AND VENTILATORS

Providing and fixing pressed steel sheet door shuttermade of 18 SWG galvanized pressed steel sheet bent toform hollow box of 40 mm overall thickness; andconsisting of/ including:(i) 3 mm thick MS flat all along perimeter(ii) Packing the shutter with mineral wool (48 kg/cum)without gap



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________(iii) Strengthening with 18 SWG GI vertical stiffeners@200 c/c(iv) 3 mm thick MS pad plates welded inside at requiredlocations for fixing of hardware etc.(v) Fixing to door frame by 100 mm long SS 304 gradeheavy duty ball bearing hinge @600 c/c maximum(vi) Hardware and vision panel as required.(vii) Grinding and smoothening of welding, cleaning,finishing (synthetic enamel painting/ polyurethane (PU)coating/ electrostatic powder coating), making truealignments and surfaces etc. all complete.Notes:1. Reference shall be made to EIL standard nos. 7-75-0070, 7-75-0071Only the net shutter(s) area shall be measured forpayment.

Double shutter painted with Electrostatic powder coatingwith following hardware:(i) Over head hydraulic door closer (heavy duty).(ii) SS 304 grade 16 mm dia 300mm long aldrop on bothsides of shutter.(iii) Spring loaded heavy duty door stopper.(iv) SS 304 grade 19 mm dia.200 mm long handle onboth side of shutter.(v) 10 mm dia SS 304 tower bolt ( 250mm long for2100mm height & 600mm long for 2500mm height)(vi) 2mm thick 25mmx 25mm GI angles (vertical) weldedto each shutter at the meeting point of double shutter. _________________________________________________________________



Aluminium work for doors, windows, venti (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 310 /A004.14.02 300.000 KG

Fixed portion made from Powder coated al (Kilogram) _________________________________________________________________

Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Z



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________sections and other sections of approved make conforming to IS: 733 and 1285,fixing with dash fasteners of required dia and size, including necessaryfilling up the gaps at junctions, i.e. at top, bottom and sides withrequired EPDM rubber/neoprene gasket etc. Aluminium sections shallbe smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in- charge. (Glazing,paneling and dash fasteners to be paid for separately)For fixed portion of aluminium doors, windows, ventilatorsand partitions made from Powder coated aluminium(minimum thickness of powder coating 50 micron as per sahde approved by BPCL):

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 320 /A004.14.05 100.000 KG

Shutters made from Powder coated alumini (Kilogram) _________________________________________________________________

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standardtubular sections/ appropriate Z sections and othersections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. attop, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-incharge.(Glazing, paneling and dash fasteners to be paidfor separately) :

For shutters of doors, windows & ventilators made fromPowder coated aluminium (minimum thickness of powdercoating 50 micron and shade as approved by BPCL) including providing andfixing hinges/pivots and making provision for fixing of fittings whereverrequired including the cost of EPDM rubber / neoprene gasket required(Fittings shall be paid for separately) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 330 /A004.14.10 10 M2

Toughened glass panes of 5.5 mm thick (Square meter) _________________________________________________________________

Providing and fixing toughened glass panes of 5.50 mmthickness in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and thedirections of engineer-in-charge. (Cost of aluminium snapbeading shall be paid in respective item) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 340 /A004.14.11 50 M2

Toughened glass panes of 8.0 mm thick (Square meter) _________________________________________________________________

Providing and fixing toughened glass panes of 8 mmthickness in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and thedirections of engineer-in-charge. (Cost of aluminium snapbeading shall be paid in respective item) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 350 /A004.14.17 100 M2

Composite Aum.l infil panel (Square meter) _________________________________________________________________

Providing and fixing composite aluminium panels as approved by BPCL. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 360 /A004.14.19 2 EA

355 X 19 mm SS stays (each) _________________________________________________________________

Providing and fixing 355 X 19 mm adjustable frictionwindow stays of approved quality made from StainlessSteel (SS 304 grade) with necessary stainless steelscrews etc. to the side hung windows as per direction ofEngineer-charge complete. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 370 /A004.14.25 10 EA

100mm brass locks for aluminium doors (each) _________________________________________________________________

Providing and fixing 100mm brass locks (best make of approved quality) foraluminium doors includingnecessary cutting and making good etc. complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 380 /A004.14.27 8 EA

Powder coated aluminium handle (each) _________________________________________________________________

Providing and fixing Powder coated minimum thickness50 micron aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction ofEngineer in-charge _________________________________________________________________



P/F pressed steel door and window frames (Lumpsum) _________________________________________________________________ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 400 /A004.15.05 18 RM

Frames painted with Electrostatic Powder (RUNNING METER) _________________________________________________________________

Providing and fixing pressed steel door and windowframes of size (assorted size out of) Overall 125mm x60mm section, of required profile conforming to IS: 4351,made of 16 SWG pressed steel including/ consisting of:

i)3 mm thick MS flat spacers welded to frame @ 500mmc/c and at holdfast locations.




ii)Filling the hollow frame section with concrete. iii)MSangle (20mmx20mmx3mm) horizontal tie member belowfloor finish.

iv)MS holdfasts (200mmx25mmx6mm) welded tospacers.

v)Fixing to masonry (by grouting the holdfasts with M-15grade concrete in minimum 250mm x 100mm x 100mmsized hole)/ fixing to RCC (by minimum 100mm long, 12mm dia metallic counter sunk anchor fasteners)

vi)MS pad plates (40mm x 150mm x 3mm) & GI mortarguard welded to frame at hinge and other hardwarelocations.

vii)Metering of joints between horizontal and verticalmembers, grinding and smoothening of welding, cleaningof frame surface, finishing (synthetic enamel painting/electrostatic powder coating/ polyurethane (PU) coating),making true alignments and surfaces etc. all complete.Notes:

1)Reference shall be made to EIL standard nos. 7-75-0070, 7-75-0071

2)Cumulative length of all horizontal and vertical framemembers shall be measured for payment. _________________________________________________________________



PLASTERING & POINTING (Lumpsum) _________________________________________________________________



PLASTER in CM 1:4/6 on RCC/PCC, masonry (Lumpsum) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 430 /A005.01.13 600 M2

Plaster with WP 18mm thk 1:6 cement supl (Square meter) _________________________________________________________________

Providing plain cement plaster in cement mortar (1cement:6 fine sand by volume) on masonry, PCC/ RCCincluding preperation of base, finishing, curing etc; alsoincluding providing 20 gauge chicken wire mesh stretchedtight at all RCC/ PCC and masonry meeting points in300mm wide strips (150mm on on each surface) fixedwith G.I. "U" type nails before plastering. _

Plain cement plaster with waterproofing compoundconforming to IS-2645 (CICO/ approved equivalent)mixed to cement mortar @ 3% by weight, Average 18mmthick 1:6 (1 cement : 6 sand) supplied by theContractor at their cost.

External plastering of the building will be done in two coats. The base coatplatering above RCC/Masonry surface will be made under this item. Subsequentfinish coat will be paid under respective item as per the thickness. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 440 /A005.01.15 100 M2



Plain cement plaster with waterproofing compoundconforming to IS-2645 (CICO/ approved equivalent)mixed to cement mortar @ 3% by weight, Average 15mmthick 1:4 (1 cement : 4 sand) supplied by the contractor at their own cost

This item may also be used for payment towards additional thickness of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________plastering if required to be provided to match the plumb of the old building. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 450 /A005.01.17 100 M2



Plain cement plaster with waterproofing compoundconforming to IS-2645 (CICO/ approved equivalent)mixed to cement mortar @ 3% by weight, Average 12mmthick 1:4 (1 cement : 4 sand) Cement supplied by theContractor at their cost.

This item may also be used for payment towards additional thickness ofplastering if required to be provided to match the plumb of the old building..

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 460 /A005.01.19 600 M2

Plaster with WP 6mm thk 1:4 cement supli (Square meter) _________________________________________________________________


Plain cement plaster with waterproofing compoundconforming to IS-2645 (CICO/ approved equivalent)mixed to cement mortar @ 3% by weight, Average 6 mmthick 1:4 (1 cement : 4 sand) Cement supplied by theContractor at their cost.




External plastering of the building will be done in two coats. The finish coatplatering above the base plaster coat will be made under this item.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 470 /A005.04.00 150 M

Providing 20mm x 10mm Grooves (Meter) _________________________________________________________________

Providing 20mm x 10mm Grooves in plastering in perfectstraight line, plumb and uniform size throughout includingfinishing etc. all complete. _________________________________________________________________



ROOFING TREATMENT (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 490 /A006.02.01 30.000 M3

P/L PCC 1:2:4 over concrete surfaces (Cubic meter) _________________________________________________________________

Providing and laying cement concrete (1 cement : 2coarse sand : 4 aggregate) over concrete surfaces, laid toslope at all heights including, finishing, curing, tampingetc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 500 /A006.12.01 450 M2

P/L A.P.P. modified reinforced bituminou (Square meter) _________________________________________________________________

Providing and laying 4mm thick A.P.P (atacticpolypropelene) modified reinforced bituminouswaterproofing membrane over terrace and parapetincluding cleaning and preperation of the surface



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________consisting of making good all the cracks and damages,filling potholes/ depressions, removing weak foamconcrete/ plaster and refilling with same whereverrequired thus preparing smooth surface of the terrace;providing and applying one coat of cold applied bitumenbased primer @ 0.2 to 0.4 litre per sq. mtr.; laying themembrane by torch welding over primer, providing100mm overlaps and appropriately pressing themembrane to remove any entrapped air, including fixingon parapet after providing 10mm x 20mm continuousgroove in parapet for terminating the membrane andfilling the groove with polyurethane sealant and continuingthis treatment at rain water outlet points; providingfinishing protective layer of 35 mm thk. P.C.C. (1:2:4) inpanels of maximum size 1200mm x 1200mm chequeredfinish with 24 SWG chicken wiremesh interposed inbetween finished smooth with joints between panelssealed with suitable polyurethane sealant; providing filletsof 75 mm radius with P.C.C. (1:2:4) at junctions ofhorizontal and vertical surfaces finished smooth;providing 450mm x 450mm khuras (rain water collectingpits) in 1:2:4 cement concrete at all outlets, levelled downby min. 25mm, finishing, curing etc. all complete as perapproved manufacturer's standard specifications andrecommendations. _________________________________________________________________



WHITEWASHING, PAINTING & POLISHING (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 520 /A007.03.00 750 M2

P/A two coats of plastic emulsion paint (Square meter) _________________________________________________________________

Providing and applying two or more coats (to give asmooth and even shade) of premium plastic emulsionpaint conforming to IS:5411 of approved make and shadeincluding cleaning and preperation of surface consistingof application of Plaster of Paris punning over entiresurface, filling all holes and depressions with plaster of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Paris, applying a coat of cement primer, two or morecoats of oil based putty (as per manufacturer'srecommendations to give a paste like putty),sandpapering etc. all complete. _________________________________________________________________



P/A two coats of distempering (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 540 /A007.04.02 10 M2

Oil bound distempering (Square meter) _________________________________________________________________

Providing and applying two coats of distempering ofapproved quality and shade including cleaning andpreparation of surfaces etc. all complete. _Oil bound distempering conforming to IS : 428 includingpreparation of surfaces (making good of uneven plasterwith plaster of paris mixed with water, sand papering),providing a priming coat of alkali resistant/ distemperprimer. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 550 /A007.10.00 760 M2

P/A white cement and polymer based wall (Square meter) _________________________________________________________________

Providing and applying min 2 mm thick white cement andpolymer based wall putty (JK Wall care/ Birla Putty/ SARAor approved equivalent) over plastered surfaces (masonrywall/ RCC) and smoothening the surface with sand paperetc., preparation of surface etc. all complete as per theapproved manufacturer¿s recommendations anddirections of Engineer-in-charge. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 560 /A007.11.00 535 M2

Premium Acry. ext. paint with silicon ad (Square meter) _________________________________________________________________

Providing and applying/ finishing the walls/ RCC surfaceswith Premium Acrylic smooth exterior paint with siliconadditives with low VOC (Volatile Organic Compound)content (Snowcryl-XT of 'Snowcem India Ltd. or approvedequivalent) of required shades on new work applied intwo or more coats at the rate of 1.43 ltr/ 10 sq.m over andincluding base coat of waterproof cement paint (ofSnowcem Plus or approved equivalent) includingcleaning, preparation of surfaces, curing etc. all complete. _________________________________________________________________



ROOFING (Lumpsum) _________________________________________________________________



P/F rain water pipes (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 590 /A008.12.08 20 M

160mm dia embedded PVC rain water pipe (Meter) _________________________________________________________________

Providing and fixing rain water pipes with M.S. holderclamps including fixing/embedding intomasonry/concrete, providing connections like shoes,vents, specials, bends etc. fixing in perfect plumb etc. allcomplete. _160mm dia O.D. Size. embedded PVC rain water pipejointed with bonding solution of approved quality andmake with pressure rating of 4kg/cm2 including clamps,connections etc. all as per approved manufacturer'sdetails _________________________________________________________________






SANITARY FITTINGS & FIXTURES (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 610 /A009.02.00 1 EA

P/F Coloured glazed Earthen ware wash do (each) _________________________________________________________________

Providing and fixing white glazed Earthen ware doubletrap, syphonic pattern wash down water closetconforming to IS : 2556 Part II including white plastic solidseat and cover conforming to IS : 2548, CP brass hingesand rubber buffers,10 litres capacity glazed Earthenwarelow level cistern conforming to IS:774 with internaloverflow system & fittings,CP brass 40mm dia flushpipe,15 mm dia ,450mm long PVC connection pipe,ballvalve, painting of all exposed matalic surfaces with 2coats of approved shade and quality synthetic enamelpaint (ICI or approved equivalent) over a priming coat ofapproved quality red oxide zinc chromate, cutting walls,floors and making good of same, making inlet and outletconnections, finishing etc. all complete.Indian / Anglo Indian / European as directed by BPCL. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 620 /A009.08.00 2 EA

P/F Glass shelf (each) _________________________________________________________________

Providing and fixing 600mm x 120mm x 4mm thick Glassshelf of approved quality with CP brass bracket and guardrails including fixing to wall with wooden cleats and CPbrass screws, cutting walls and making good the same,finishing etc.all complete. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 630 /A009.09.00 2 EA

P/F brass towel rail (each) _________________________________________________________________

Providing and fixing approved quality chromium platedbrass towel rail of 20mm dia, 600mm length and 1.25mmthickness including fixing to wall with wooden cleats andCP brass screws, cutting walls and making good thesame, finishing etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 640 /A009.10.00 2 EA

P/F liquid soap container (each) _________________________________________________________________

Providing and fixing approved quality chromium platedliquid soap container including fixing to wall with woodencleats and CP brass screws, cutting walls and makinggood the same,finishing etc. all complete. _ _________________________________________________________________



P/F Bib cocks/ stop cocks (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 660 /A009.11.01 5 EA

15mm dia CP Brass stop cock. (each) _________________________________________________________________

Providing and fixing approved quality chromium platedliquid soap container including fixing to wall with woodencleats and CP brass screws, cutting walls and makinggood the same,finishing etc. all complete. _Providing and fixing Heavy grade Bib cocks/ stop cocksof spring loaded self closing type conforming to IS : 781



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________including making connections, cutting walls and makinggood the same etc. all complete. _ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 670 /A009.11.02 10 EA

15mm dia CP Brass bib cock. (each) _________________________________________________________________

Providing and fixing approved quality chromium platedliquid soap container including fixing to wall with woodencleats and CP brass screws, cutting walls and makinggood the same,finishing etc. all complete. _Providing and fixing Heavy grade Bib cocks/ stop cocksof spring loaded self closing type conforming to IS : 781including making connections, cutting walls and makinggood the same etc. all complete. _ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 680 /A009.14.00 1 EA

P/F CP Brass Toilet paper holder (each) _________________________________________________________________

Providing and fixing CP Brass Toilet paper holder ofapproved make with CP brass brackets including fixing towall with wooden cleats, CP brass screws,cutting wallsand making good the same, finishing etc. all complete. _ _________________________________________________________________



P/L round/oval shaped counter top Hand W (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 700 /A009.15.02 2 NO

Round / oval shaped counter top Wash Bas (Number) _________________________________________________________________

Providing and fixing in position round/ oval shaped



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________counter Hand Wash Basin with anti-splash rims,conforming to IS:2556 Part IV, to fit in exactly and neatlyin the cutout in the marble/ granite stone finished R.C.Ccounter; one 15mm dia CP brass pillar cock, rubber plugwith C.P. brass chain, 32mm C.P. waste fitting ofstandard pattern type with 32mm dia G.I. pipe, C.P. brassbottle trap, cutting walls, counter etc. and making goodthe same, also including providing cut out in marble/granite slab counter top (and R.C.C underneath) of exactsize and shape for wash basin to fit in neatly andperfectly; making all connections, finishing etc. allcomplete. (Marble/ Granite counter top shall be paidseperately under relevant item of `Floor Finishing')_Providing round/ oval shaped counter Wash Basin ofglazed chinaware in approved colour._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 710 /A009.16.00 1 NO

P/F stainless steel Kitchen/Laboratory s (Number) _________________________________________________________________

Providing and fixing stainless steel Kitchen/ Laboratorysink of approx. Size 610mm x 450mm x 200mm made ofmin. 1mm thick stainless steel sheet of `Salem Steel' orequivalent supported on and including M.S. bracketsconforming to IS: 775; one 15mm dia C.P brass longbody bib cock (if fixed to wall) or swivel type pillar cock (iffixed to counter), 15mm dia PVC/ G.I. connections to floortrap with unions etc.; painting all exposed metallicsurfaces with min. 2 coats of synthetic enamel paint ofapproved make and shade over acoat of red oxide zincchromate primer; cutting floor, walls, counter etc. andmaking good the same, making all connections, finishingetc. all complete._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 720 /A009.17.00 1.500 M2

P/F Granite partitions for urinals (Square meter) _________________________________________________________________

Providing and fixing minimum 17mm thick polishedgranite stone partitions (in approved quality, shade anddesign/ shape) with round edges for urinals including



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________cutting walls, inserting (up to 100mm depth) and fixing theslab with Cement Mortar (1 cement : 3 coarse sand byvolume), making good of all damaged work, finishing etc.all complete _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 730 /A009.18.00 1 M2

P/F beveled edge round mirror (Square meter) _________________________________________________________________

Providing and fixing round edged mirror of 6mm thickfloat glass with 6mm thick waterproof marine ply backingand rounded/ beveled edging, fixed on wall with woodencleats and CP brass screws including cutting walls/ tiles,making good the same, finishing etc. all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 740 /A009.19.00 1 NO

Health faucet (Number) _________________________________________________________________

Providing and fixing CP Brass hand shower (healthFaucet, of Jaquar or approved equivalent ) with 8 mmDia, 1 metre long PVC Tube and Wall hook in approvedcolour and finish with all necessary fittings etc. allcomplete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 750 /A009.24.00 2 EA

P/F white glazed ceramic, flat back half (each) _________________________________________________________________

Providing and fixing white glazed ceramic, flat back halfstall type Urinals of 610mm x 400mm x 380mm sizeconforming to IS:2556 Part-VI, having electronic, batteryoperated sensor based flushing system of approvedmake and model including 32mm dia GI waste pipe withbrass union, CP brass bottle trap, CP brass spreader,tee, distribution pipe etc., painting of all exposed metallicsurface with 2 coats of approved shade and qualitysynthetic enamel paint (ICI or approved equivalent) over a



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________priming coat of approved quality red oxide zinc chromate,making inlet and outlet connections, fixing with C.P. brassscrews, finishing etc. all complete. _________________________________________________________________



FALSE CEILING, FALSE FLOORING, UNDERDECK (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 770 /A010.01.01 300 M2

Tray type Aluminium plank false ceiling (Square meter) _________________________________________________________________

"Providing and fixing Tray type Aluminium plank false ceiling consisting of254/305mm x 1264mm or 600mm x600mm size Aluminium planks (profiled for positive engagement into clip-inprofiles and demounting of individual planks) manufactured out of 0.7mm thk.Aluminium alloy 3105/3005/5052 (as per ASTM 209M) with stove enamelled (coilcoated) finish in approved colour and suspension system consisting of 0.5mmthk.40mm x 20mm galvanised steel clip-in main runner profiles (@ 1264mm or600mm as per plank size)supported by and including 0.5mm thk. 25mm x 16mm GIsuspension angle,1mm thk. 25mm x 34mm x 76mmCRCA zinc plated steel ceiling brackets (@ max.1264mm c/c or 600mm as per profile) fixed to roof slab/beam,0.5mm thk. 40mmwide, 105mm high G.I. hold on clamps slotted for level adjustment, perimeterangles including providing slit openings for fixing supply/return air grill,lighting fixtures, AC ducts etc. all complete. ."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 780 /A010.04.00 300 M2

P/F underdeck insulation (Square meter) _________________________________________________________________

"Providing and fixing in position underdeck insulation consisting of rigidPolyisocyanurate foam (PIR) slabs of size 1000 x 500mm and thickness of 30mm



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________(covered on one side with glass fibre tissue/ Aluminium foil having 50mmoverlap) conforming to IS:12436 having density not less than 32 kg./ Cu. M.,thermal conductivity (K- value) not more than 0.023 w/mk measured at 10deg. C;classified as 'Class I' for surface spread of flame as per BS 476, part 7;fixed to R.C.C. slab by hot blow grade bitumen of 85/25 grade or cold adhesiveCPRX applied over a coat of bituminous primer @ 0.5 Litres/ Sq.M. applied tobare R.C.C. surface and to the two surface of each PIR panel and pressedin position (while the bitumen is still tacky) with the help of G.I. screws(No. 8 x75mm long) fixed into rawl plugs (holes in R.C.C. for the rawl plugs shall bedrilled prior to applying coat of bituminous primer) of size 8 x 25mm inserted(5 nos. for each slab- One each at 4 corners and one at center) and G.Iwashers 25mm dia; including covering the overlaps with approved qualitysealing compound (MAS-94 or equivalent); chicken wire mesh 24G x 19mm shallthen be fixed to G.I screws and tightened with lacing wire; includingpreparation of surface consisting of cleaning R.C.C surface of all dust,dirt and loose particles by wire brushing; etc. all complete as perapproved manufacturer's standard specifications and recommendations."

_________________________________________________________________



P/L False flooring (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 800 /A010.15.03 220 M2

False flooring finished 2 mm thk Laminat (Square meter) _________________________________________________________________

"Providing and installing/ fixing in position 600mm-1000mm high truly levelled and aligned cavity/ false flooring system havingload bearing capacity of uniformly distributed load of minimum 2025 kg/ sq.m.and point load of 675 Kg., the system consisting of:(i) Sub-structure/ pedestal assembly (designed for speedy assembly/removal for relocation/ maintenance) of zinc electro plated steel comprisingof:a. 90mm x 90mm x 4mm embossed pedestal head attachment mechanically riveted to a 90mm long,minimum 19mm dia threaded bright M.S. rod stud withcheck nuts for level adjustment (for upto 25mm) and arresting vertical



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________movement, anti-vibrational PVC cap (for panel and stringer location),b. CRCA (Electrical resistant welded) Pedestal of 32mm dia (OD), 2mm thickpipe mechanically reduced to four ribs at top to accommodate head assembly,mechanically locked to maintain true plumb welded to pedestal base plate.c. Pedestal Base plate 150mm x 150mm x 4mm thick(with stiffening folds) fixed/ anchored to main concrete floor @ 600mm c/cboth ways (for installing flooring tiles) by means of adhesive or fastener asrecommended by Manufacturer.(ii) Stringers of minimum sectional size 20mm x 32mm x1.2mm made of hot dip galvanized steel cold rolled construction with ribsembossed on 3 sides (designed forstrength, lateral stability, rolling loadsand to support panels on all four sides for alignment), having counter sunkholes at both ends for fixing to pedestal head assembly with M6machine screws.(iii) Removable and re-usable Floor panels of size600mm x 600mm made of all steel welded construction(cleaned, degreased and phosphated with 11 tank process, finished with 40-60micron epoxy coating (and, heated to achieve adhesion to the panel surfaceand corrosion resistance) with bottom surface consisting of multiplehemispherical and reverse cones and top plain sheet (fuse welded at 129locations) to form an enclosed panel of an overall depth 37mm; the inner emptycore of the panel injected with light weight fire retardant, non- combustiblecementitious compound (at high pressure to fill all crevices of the panel),each panel finished on top with 2mm thick fire retardant floor grade highpressure laminate/ 2mm thick anti-static PVC tiles in approved design/ shade/texture; fixed to flooring panel by means of approved adhesive; the edges ofthe finished panels provided with conductive PVC edge trim 5mm wide on allsides (mechanically locked and sealed in place).The item includes:i) Providing and fixing all accessories like screws, bolts, adhesive etc. asper manufacturer's specifications.ii) Making necessary adjustment in grid dimensions,stringer lengths, floor panel dimensions etc. at ends or centre (to caterto specific room sizes) or at panels locations, as required.iii) Cutting of floor panels as required at ends.iv) Treating the underneath cement concrete floor with one component polyurethane floor coating etc. all complete.v) Providing additional steel structural supports/ pedestal assembly at edges,cut outs etc. as required.vi) Providing all necessary accessories such as outlet boxes, grommets, Panellifters (at least one for each building) as required etc. all complete."False flooring panels with 2mm thick fire retardant floor grade high pressurelaminate conforming to BS : 476 part - 7 on a semi-automated laminationline in approved design/ shade/ texture.

_________________________________________________________________






MISCELLANEOUS ITEMS (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 820 /A011.07.00 1 M

P/F 50mm dia GI pipe spouts to slope (Meter) _________________________________________________________________

Providing and fixing in position 50mm dia GI pipe spoutsto slope for drainage of canopy, chajja etc., includingpuncturing the masonry /RCC and grouting with M-15grade concrete, finishing etc. all complete. _ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 830 /A011.22.00 15 M

1000 mm high Stainless steel hand rail (Meter) _________________________________________________________________

Supplying, assembling and installing 1000 mm high satinfinish stainless steel (SS 304 grade) tubular railing ofapproved design in staircases, ramps, around floor cutouts etc. consisting of:

1. 50mm dia SS pipe top handrail

2. 32 mm dia SS pipe balusters (at every third step forstaircase, @ maximum 1200mm c/c for ramp, floorcutouts)

3. 3 nos minimum 18mm dia SS pipe intermediatehandrails.

Including:

1. Fixing balusters to floor with 4 nos bolts änd 8mmthick, 100mm dia SS base plate & SS cap/collar.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________2. Fixing top handrail to the balusters with 12mm dia SSbar connector & 6mm thick SS saddle plate.

3. Fixing intermediate handrails to the balusters with12mm dia SS bar connector.

4. All end caps, decorative caps overbalustrades,necessary bending, welding, polishing of allwelded joints (Length of top handrail shall be measuredfor payment). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 840 /A015.02.00 600 M2

Dismantling/removing existing tile/stone (Square meter) _________________________________________________________________

Dismantling/removing existing tile/stone work on wallincluding plaster, fixing material for all applicable heightsincluding supply of tools and tackles, necessaryscaffolding, cleaning and stacking of serviceable material,disposal of unserviceable material to designated placewithin the plant boundary as per the instructions of theengineer-in-charge, etc., all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 850 /A015.03.00M01 2 NO

Dismantling/removing existing Al. Door (Number) _________________________________________________________________

Dismantling/removing existing wooden Aluminum frameswith shutters, neatly from the opening including supply oftools and tackles, cleaning and stacking of serviceablematerial, disposal of unserviceable material to designatedplace within the plant boundary as per the instructions ofthe engineer-in-charge, etc., all complete. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 860 /A015.04.00M01 2 M2

Dismantling/removing existing Al. Window (Square meter) _________________________________________________________________



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Dismantling/removing existing Aluminum Windows/ventilators including frame, glazed shutter, grill neatlyfrom the opening, for all applicable heights includingsupply of tools and tackles, necessary scaffolding,cleaning and stacking of serviceable material, disposal ofunserviceable material to designated place within theplant boundary as per the instructions of the engineer-incharge,etc., all complete.(Note ¿ area of windows, ventilators shall be measuredfor payment purpose.) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 870 /A015.05.00 6 M2

Dismantle/remove existing plumb/sanit. f (Square meter) _________________________________________________________________

Dismantling/removing existing plumbing/sanitary fixtures/fittings in Toilets like wash down WC/ Indian WC(including cistern), wash basins, bib cock, stop cock,towel rods, soap dish, shower rose, health faucet,geysers including pipe and pipe fittings etc., includingsupply of tools and tackles, cleaning and stacking ofserviceable material, disposal of unserviceable materialto designated place within the plant boundary as per theinstructions of the engineer-in-charge, etc., all complete.

( Note- Floor area of toilet shall be measured forpayment) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 880 /A016.03.00 3 M2

P/F Fire rated Single glazed door with p (Square meter) _________________________________________________________________

Providing and fixing 2 hours fire rated, fully glazed, singleshutter doors consisting of steel door frame, shutterincluding stiles, rails, insulation, transparent glass,sealant and hardware such as hinges, panic bar, locks/trims for panic bar, door closer, door stopper, concealedflush bolt including fixing with masonry, partition etc. allcomplete as per Specification and approved Manufacturer's details. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 890 /A016.04.00 17 M2

P/F Fire rated Double glazed door with p (Square meter) _________________________________________________________________

Providing and fixing 2 hours fire rated, fully glazed, doubleshutter doors consisting of steel door frame, shutterincluding stiles, rails, insulation, transparent glass,sealant and hardware such as hinges, panic bar, locks/trims for panic bar, door closer, door stopper, concealedflush bolt including fixing with masonry, partition etc. allcomplete as per Specification and approvedManufacturer's details. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 900 /A016.09.00 9 M2

P/F fire rated glazed partition (Square meter) _________________________________________________________________

Providing and fixing 2 hours fire rated, glazed partition ofdesired design consisting of steel frame, insulation andtransparent glass and glazing beading, matrix mineralboards, intumescent putty, fire resistant acrylic sealantetc. all complete including preparing fabrication/installation drawings including fixing with masonry,partition etc. all complete as per specification andapproved Manufacturer's details. _________________________________________________________________


______________________________________________________________________________________________________________________________________________Informatory item_______________________________________________________________________ 910 /S000.00.00 LS

CIVIL & STRUCTURAL (Lumpsum) _________________________________________________________________



EARTH WORK - SPECIFICATION NO. 6-68-0003 (Lumpsum)




_________________________________________________________________



E/W Excavation in soil (Lumpsum) _________________________________________________________________ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 940 /S001.01.01 200.000 M3

E/W Exacavation in soil upto 1.5m depth (Cubic meter) _________________________________________________________________

Earth work in EXCAVATION below ground level for allkinds of works in ALL TYPES OF SOILS EXCEPT SOFTROCK AND HARD ROCK as classified in specification fora depth upto 1.5m including removal of vegetation,shrubs and debris, cutting and dressing of sides inslopes, levelling, grading and ramming of bottoms,dewatering of accumulated water from any source andkeeping the surface dry for subsequent works anddisposal or stacking of excavated material within a lead of100m, as directed including providing temporary supportsto existing service lines like water pipes, sewage pipes,electric overhead and underground cables etc. allcomplete, but excluding shoring and strutting. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 950 /S001.01.02 175.000 M3

E/W Exacavation in soil beyond 1.5m upto (Cubic meter) _________________________________________________________________

Earth work in EXCAVATION below ground level for allkinds of works in ALL TYPES OF SOILS EXCEPT SOFTROCK AND HARD ROCK as classified in specification fora depth beyond 1.5m and upto and inclusive of 3.0mincluding removal of vegetation, shrubs and debris,cutting and dressing of sides in slopes, levelling, gradingand ramming of bottoms, dewatering of accumulatedwater from any source and keeping the surface dry for



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________subsequent works and disposal or stacking of excavatedmaterial within a lead of 100m, as directed includingproviding temporary supports to existing service lines likewater pipes, sewage pipes, electric overhead andunderground cables etc. all complete, but excludingshoring and strutting. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 960 75.000 M3

E/W Exacavation in soft rock upto 1.5m d (Cubic meter) _________________________________________________________________

Earth work in EXCAVATION below ground level for allkinds of works in ALL TYPES OF SOFT ROCKS EXCEPT HARD ROCK as classified inspecification for a depth upto 1.5m including removal of vegetation, shrubsand debris, cutting and dressing of sides in slopes, levelling, grading andramming of bottoms,dewatering of accumulated water from any source andkeeping the surface dry for subsequent works anddisposal or stacking of excavated material within a lead of100m, as directed including providing temporary supportsto existing service lines like water pipes, sewage pipes,electric overhead and underground cables etc. allcomplete, but excluding shoring and strutting. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 970 50.000 M3

E/W Exacavation in soft rock beyond 1.5m (Cubic meter) _________________________________________________________________

Earth work in EXCAVATION below ground level for allkinds of works in ALL TYPES OF SOFT ROCKS EXCEPT HARD ROCK as classified inspecification for a depth beyond 1.5m and upto 3 meters including removal ofvegetation, shrubs and debris, cutting and dressing of sides in slopes,levelling, grading and ramming of bottoms,dewatering of accumulated water from any source andkeeping the surface dry for subsequent works anddisposal or stacking of excavated material within a lead of100m, as directed including providing temporary supportsto existing service lines like water pipes, sewage pipes,electric overhead and underground cables etc. allcomplete, but excluding shoring and strutting. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 980 25.000 M3

Excavation in hard rock upto 1.5m depth (Cubic meter) _________________________________________________________________

Earth work in EXCAVATION below ground level for allkinds of HARD ROCK as classified in specification for a depth upto 1.5mincluding removal of vegetation, shrubs and debris, cutting and dressing ofsides in slopes, levelling, grading and ramming of bottoms,dewatering of accumulated water from any source andkeeping the surface dry for subsequent works anddisposal or stacking of excavated material within a lead of100m, as directed including providing temporary supportsto existing service lines like water pipes, sewage pipes,electric overhead and underground cables etc. allcomplete, but excluding shoring and strutting. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 990 25.000 M3

Exacavation in hard rock beyond 1.5m upt (Cubic meter) _________________________________________________________________

Earth work in EXCAVATION below ground level for allkinds of HARD ROCK as classified in specification for a depth eyond 1.5 meterand upto 3m including removal of vegetation, shrubs and debris, cutting anddressing of sides in slopes, levelling, grading and ramming of bottoms,dewatering of accumulated water from any source andkeeping the surface dry for subsequent works anddisposal or stacking of excavated material within a lead of100m, as directed including providing temporary supportsto existing service lines like water pipes, sewage pipes,electric overhead and underground cables etc. allcomplete, but excluding shoring and strutting. _________________________________________________________________



Shoring & Strutting (Lumpsum) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1010 /S001.06.01 50 M2

Shoring and Strutting by Open Timbering (Square meter) _________________________________________________________________

Providing and installing approved type of "SHORING ANDSTRUTTING" by open timbering method for all depths toretain earth including dismantling and removal of thesame etc. from site after completion of work etc. allcomplete as directed. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1020 /S001.06.02 50 M2

Shoring and Strutting by Close Timberin (Square meter) _________________________________________________________________

Providing and installing approved type of "SHORING ANDSTRUTTING" by close timbering method for all depths toretain earth including dismantling and removal of thesame etc. from site after completion of work etc. allcomplete as directed. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1030 /S001.07.01 300.000 M3

Backfilling after exceution of work (Cubic meter) _________________________________________________________________

BACKFILLING after execution of the WORK to propergrade and level with selected materials from availableexcavated soil from spoil heaps within a LEAD OF 100M,including re- excavating the deposited soil excavatedearlier, breaking clods, laying at all depths and heights inlayers of thickness not exceeding 15 Cms. watering,rolling and ramming by manual methods/ mechanicalcompactors to achieve 90% laboratory maximum drydensity, dressing, trimming etc. in foundations, plinths,trenches, pits etc. all complete. _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1040 /S001.10.05 250.000 M3

Transporting & Disposing the SURPLUS EAR (Cubic meter) _________________________________________________________________

Transporting and disposing the SURPLUS EARTH ANDDEBRIS including shrubs and vegetations fromconstruction areas to areas ANYWHERE OUTSIDE THEPLANT BOUNDARY, including re-excavating thedeposited soil excavated earlier, loading, transportation,unloading, laying at all depths and heights, stacking,levelling and dressing both the area (viz. from where theearth is transported and where it is deposited) to requiredlevels and slopes complete with all lifts as directed. Forcarting on the basis of truck measurements (volume oftruck reduced by 30% for voids). DISPOSAL AREASOUTSIDE PLANT BOUNDARY TO BE ARRANGED BYTHE CONTRACTOR. Royalty as applicable for disposaloutside plant limits to be borne by the Contractor. _________________________________________________________________



PLAIN & REINFORCED CEMENT CONCRETE SPEC (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1060 /S002.17.08 50.000 M3

PCC,M20 (Cubic meter) _________________________________________________________________

PLAIN & REINFORCED CEMENT CONCRETE: (REFERSPECIFICATION NO. 6-68-0004) _Providing and laying PLAIN CEMENT CONCRETE for alldepths below and upto plinth level in foundations,drains,fillings, non-suspended floors, pavements & ramps or anyother works etc. including shuttering, tamping, ramming,vibrating, curing, etc. all as specified in any shape,position, thickness and finishing the top surface rough orsmooth as specified and directed all complete for



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________concrete grade M20 with 20mm and down size gradedcrushed stone aggaregates/Gravels.ALL MATERIALSINCLUDING CEMENT SUPPLIED BY THECONTRACTOR. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1070 /S002.18.18 75.000 M3

P&L RCC M35 20mm sub-str - NonFIM (Cubic meter) _________________________________________________________________

Providing and laying REINFORCED CEMENTCONCRETE OF M-35 GRADE with 20 mm and downsize graded crushed stone aggregates/ gravel in SUBSTRUCTUREe.g. foundations, raft, beams, slabs, pilecaps, retaining walls, dyke walls, jambs, counterforts,buttresses, pedestals, pipe sleepers, columns,suspended floors, staircases, landings, steps, bracketsetc., including equipment/ machine foundations &pedestals viz. compressors, ID & FD fans, pumps,generators, crushers, mills, etc., (including single pourconcreting as specified on the drawing), applying cementwash on concrete surface (wherever no other surfaceapplication is specified), providing pockets, openings,recesses, chamfering, etc., wherever required, vibrating,tamping, curing and rendering if required to give asmooth and even surface etc. (EXCLUDING THE COSTOF REINFORCEMENT, SHUTTERING & SPECIFIEDADMIXTURES) for all depths below and upto plinth levelin any shape, position and thickness etc. all complete asspecified, shown and directed. ALL MATERIALSINCLUDING CEMENT SUPPLIED BY THECONTRACTOR. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1080 /S002.18.23 10.000 M3

P&L RCC M35 20mm sub-str hollow - NonFIM (Cubic meter) _________________________________________________________________

Providing and laying REINFORCED CEMENTCONCRETE OF M-35 GRADE with 20 mm and downsize graded crushed stone aggregates/ gravel in SUBSTRUCTUREe.g. trenches, culverts, manholes, pipeencasement, catchpits, drains, pits, etc., applying cement



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________wash on concrete surface (wherever no other surfaceapplication is specified), providing pockets, openings,recesses, chamfering, etc., wherever required, vibrating,tamping, curing and rendering if required to give asmooth and even surface etc. (EXCLUDING THE COSTOF REINFORCEMENT, SHUTTERING & SPECIFIEDADMIXTURES) for all depths below and upto plinth levelin any shape, position and thickness etc. all complete asspecified, shown and directed. ALL MATERIALSINCLUDING CEMENT SUPPLIED BY THECONTRACTOR. _________________________________________________________________



RCC Superstructures - Non FIM Items (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1100 /S002.19.15 10.000 M3

P&L RCC M20 20mm sup-str upto 20m - NonF (Cubic meter) _________________________________________________________________

Providing and laying REINFORCED CEMENTCONCRETE OF M-20 GRADE with 20 mm and downsize graded crushed stone aggregates/ gravel in SUPERSTRUCTURE in suspended floors, slabs, beams,columns, walls including counterforts, staircases,landings, steps, facias, fins, mouldings, gutters, shelves,window sills, canopies, lintels, girders, ducts, brackets,chajjas with drip moulds, pedestals, posts, struts,equipment/ machine foundations, ramps etc. (includingsingle pour concreting as specified on the drawing),providing cement wash (wherever no other surfaceapplication is specified), providing pockets, openings,recesses, chamfering wherever required, vibrating,tamping, curing and rendering if required to give asmooth and even surface etc. (EXCLUDING THE COSTOF REINFORCEMENT, SHUTTERING AND SPECIFIEDADMIXTURES) FOR ALL HEIGHTS UPTO &INCLUSIVE OF 20 m ABOVE PLINTH LEVEL in anyshape, position, thickness etc. all complete as specified,shown and directed. ALL MATERIALS INCLUDING



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________CEMENT SUPPLIED BY THE CONTRACTOR _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1110 /S002.19.18 65.000 M3

P&L RCC M35 20mm sup-str upto 20m - NonF (Cubic meter) _________________________________________________________________

Providing and laying REINFORCED CEMENTCONCRETE OF M-35 GRADE with 20 mm and downsize graded crushed stone aggregates/ gravel in SUPERSTRUCTURE in suspended floors, slabs, beams,columns, walls including counterforts, staircases,landings, steps, facias, fins, mouldings, gutters, shelves,window sills, canopies, lintels, girders, ducts, brackets,chajjas with drip moulds, pedestals, posts, struts,equipment/ machine foundations, ramps etc. (includingsingle pour concreting as specified on the drawing),providing cement wash (wherever no other surfaceapplication is specified), providing pockets, openings,recesses, chamfering wherever required, vibrating,tamping, curing and rendering if required to give asmooth and even surface etc. (EXCLUDING THE COSTOF REINFORCEMENT, SHUTTERING AND SPECIFIEDADMIXTURES) FOR ALL HEIGHTS UPTO &INCLUSIVE OF 20 m ABOVE PLINTH LEVEL in anyshape, position, thickness etc. all complete as specified,shown and directed. ALL MATERIALS INCLUDINGCEMENT SUPPLIED BY THE CONTRACTOR. _________________________________________________________________



RCC Flooring - Non FIM Items (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1130 /S002.20.02 15.000 M3

P/L RCC of M-20 with 20mm NON-SUSPENDED (Cubic meter) _________________________________________________________________

Providing and laying REINFORCED CEMENT



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________CONCRETE OF M-20 GRADE with 20mm and down sizegraded crushed stone aggregates / gravel in NONSUSPENDEDslabs / pavement slabs includingpedestals, ramps etc. leaving pockets, laying in alternatepanels to required slopes, all necessary form work andfinishing the top surface rough or smooth, including costof admixtures if used, providing pockets, openings,recesses, chamfering etc., wherever required, vibrating,tamping, curing and rendering if required to give asmooth and even surface etc. (EXCLUDING THE COSTOF REINFORCEMENT AND SHUTTERING) for alldepths below and upto plinth level in any shape, positionand thickness etc. all complete as specified, shown anddirected. ALL MATERIALS INCLUDING CEMENTSUPPLIED BY THE CONTRACTOR._ _________________________________________________________________



Precast Elements - Non FIM Items (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1150 /S002.22.10 5.000 M3

RCC PRECAST ELEMENTS of M-35, upto 500KG (Cubic meter) _________________________________________________________________

Manufacturing, transporting, supplying and erecting inposition Reinforced Cement Concrete PRECASTELEMENTS such as columns, beams, cover slabs,lintels, louvers, fins, shelves etc. of M-35 grade with20mm and down size graded crushed stoneaggregates/gravel, each unit upto and inclusive of 500 kg.for all leads, levels, shapes and thickness including allmoulds, shuttering and centering, vibrating, tamping,curing, chamfering wherever required, finishing the topsurface with cement mortar 1:3 ( 1 Cement : 3 Sand) togive a smooth and even surface, or non skid finish asspecified, providing lifting hooks, metal inserts, makingholes pockets, (only M.S. inserts to be measured & paidseparately) transporting to site, erecting, levelling,aligning and fixing in position with cement mortar 1:3 (Cement : 3 Coarse Sand), breaking bricks and/or



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________concrete surfaces and making good the same etc. allcomplete (excluding the Cost of Reinforcement ) and asdirected. All materials including cement supplied by thecontractor. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1160 /S002.22.11 5.000 M3

RCC PRECAST ELEMENTS of M-35, beyond 500 (Cubic meter) _________________________________________________________________

Manufacturing, transporting, supplying and erecting inposition Reinforced Cement Concrete PRECASTELEMENTS such as columns, beams, cover slabs,lintels, louvers, fins, shelves etc. of M-35 grade with20mm and down size graded crushed stoneaggregates/gravel, each unit beyond 500 kg and upto andinclusive of 1000 kg. for all leads, levels, shapes andthickness including all moulds, shuttering and centering,vibrating, tamping, curing, chamfering wherever required,finishing the top surface with cement mortar 1:3 ( 1Cement : 3 Sand) to give a smooth and even surface, ornon skid finish as specified, providing lifting hooks, metalinserts, making holes pockets, (only M.S. inserts to bemeasured & paid separately) transporting to site,erecting, levelling, aligning and fixing in position withcement mortar 1:3 ( Cement : 3 Coarse Sand), breakingbricks and/or concrete surfaces and making good thesame etc. all complete (excluding the Cost ofReinforcement ) and as directed. All materials includingcement supplied by the contractor. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1170 /S002.23.08 20.000 MT

S&P HYD Bars Fe500D - NonFIM (Tonnes) _________________________________________________________________

Supplying and placing in position HIGH YEILDSTRENGTHDEFORMED STEEL BARSREINFORCEMENT of Grade Fe500D TMT conforming toIS:1786, for RCC work including transporting the Steel,straightening, cleaning, decoiling, cutting, bending torequired shapes and lengths as per details, binding with18 SWG black soft annealed binding wire at every



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________intersection, supplying and placing with proper coverblocks, supports, chairs, overlaps, welding, spacers,fanhooks etc. for all heights and depths etc. all completeas directed. SUPPLY OF ALL MATERIAL INCONTRACTOR'S SCOPE. _________________________________________________________________



Centering and Shuttering - Non FIM Items (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1190 /S002.25.01 290 M2

For all depths below and upto & & inclu (Square meter) _________________________________________________________________

Providing and fixing CENTERING AND SHUTTERING infoundations, footings,raft beams, slabs, pile caps,retaining walls, jambs, counter-forts, buttresses, trenches,equipment/machine foundations, pedestals, abutments,pipe sleepers, columns, plinth beams, lintels, suspendedslabs, beams, staircases, landings, steps, non-circulartunnels/bunkers/ silos/ shafts/ hoppers/liquid storagestructures etc. for all depths below and upto & inclusive ofplinth level including shuttering for single pour concreting,strutting, bracing, propping etc., keeping the same inposition during concreting and removal of the same afterspecified period etc. for Straight/ Inclined Shuttering,keeping necessary provision for inserts, projectingdowels, anchor bolts or any other fixture etc. all completeand as specified and directed._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1200 /S002.25.02 540 M2

For all heights above plinth level (Square meter) _________________________________________________________________

Providing and fixing CENTERING AND SHUTTERING insuperstrctures in retaining walls, jambs, counter-forts,buttresses, equipment/ machine foundations,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________abutments,columns, lintels, suspended slabs, beams,staircases, landings, steps, non-circular tunnels/ bunkers/silos/ shafts/ hoppers/ liquid storage structures etc. for allheights above plinth level including shuttering for singlepour concreting, strutting, bracing, propping etc., keepingthe same in position during concreting and removal of thesame after specified period etc. for Straight/ InclinedShuttering, keeping necessary provision for inserts,projecting dowels, anchor bolts or any other fixture etc. allcomplete and as specified and directed._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1210 /S002.29.02 110 EA

D/S/Fixing Re-bars of dia. 12, 16 &20mm (each) _________________________________________________________________

"Designing, supplying and fixing rebars in already castconcrete, including drilling, cleaning hole with air blow-out& wire-brush and injecting odourless Chemical ofapproved make, packed in dual foil, with the help ofdispenser into a hole of diameter and depth as permanufacture specification, at all levels & locations forhigh strength deformed steel reinforcement bars of dia.16 mm & 20 mm of Grade Fe500D (conforming toIS:1786), DESIGNED FOR FULL TENSILEANCHORAGE, including testing (as per manufacturer'srecommendations), adjusting and making good anydamage done to the structure etc. all complete asspecified and directed. SUPPLY OF ALL MATERIAL INCONTRACTOR'S SCOPE EXCLUDINGREINFORCEMENT BARS _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1220 /S002.29.03 10 EA

D/S/Fixing Re-bars of dia.of 25mm & 28mm (each) _________________________________________________________________

"Designing, supplying and fixing rebars in already castconcrete, including drilling, cleaning hole with air blow-out& wire-brush and injecting odourless Chemical ofapproved make, packed in dual foil, with the help ofdispenser into a hole of diameter and depth as permanufacture specification, at all levels & locations for



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________high strength deformed steel reinforcement bars of dia.25 mm & 28 mm of Grade Fe500D (conforming toIS:1786), DESIGNED FOR FULL TENSILEANCHORAGE, including testing (as per manufacturer'srecommendations), adjusting and making good anydamage done to the structure etc. all complete asspecified and directed. SUPPLY OF ALL MATERIAL INCONTRACTOR'S SCOPE EXCLUDINGREINFORCEMENT BARS.

" _________________________________________________________________



CONCRETE FOR LIQUID RETAINING/LEAK SPEC (Lumpsum) _________________________________________________________________

CONCRETE FOR LIQUID RETAINING/LEAK PROOFSTRUCTURES (REFER SPECIFICATION NO.6-68-0005) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1240 /S003.04.01 30.000 KG

Supplying & Mixing WATER PROOFING COMPOU (Kilogram) _________________________________________________________________

Supplying and mixing of approved brand of integralWATER PROOFING COMPOUND in cement concrete,cement mortar etc. as per manufacturer's specifications,to make it leak proof/water tight etc. all complete asspecified and directed. _________________________________________________________________



STRUCTURAL STEEL WORKS SPEC NO. 6-68-00 (Lumpsum) _________________________________________________________________

STRUCTURAL STEEL WORKS (REFERSPECIFICATION NO. 6-68-0006) _ _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1260 /S004.03.05 2.500 MT

Supplying, Fabrication of Structural ste (Tonnes) _________________________________________________________________

Supplying, Fabricating at CONTRACTOR's shop outsidethe plant boundary, transporting fabricated items to site,unloading, storing, erecting in position and testing/examining , bolted and/ or welded STRUCTURAL STEELWORKS of Grade E250A / E250BR / E250B0(conforming to IS:2062 at all locations and levels UPTO& INCLUSIVE OF 20 m ABOVE HPP/ FGL including allbuiltup sections/ compound sections made out of rolledsections and/or plates/ bent plates in all types ofstructural frameworks, floor beams, stairs, or any otherstructural items or accessories to support equipments,piping, conveyor galleries, towers, masts, etc., butexcluding silos, bunkers, hoppers, etc., cutting to requiredsize, straightening/ bending if required, edge preparation,cleaning, preheating, bolting/ welding of joints, (includingsealing the joints of box sections with continuous weldingand plugging any open ends & holes of box sections),finishing edges by grinding, fixing in line and level withtemporary staging & bracing and removal of the sameafter erection, grouting with Ordinary Grout or premix freeflow Nonshrink Grout as specified, including preparationand submission of detailed fabrication drawings,preparing the surface for painting (SSPC-SP-10) andapplying pre-erection/ shop primer (1 coat of F-9 @ 65-75micron DFT) as per EIL Specification No. 6-79-0020 (oras per Job Specification, wherever applicable) afterfabrication etc.. all complete. SUPPLY OF ALLMATERIAL IN CONTRACTOR'S SCOPE. _________________________________________________________________



Painting - Non FIM Items (Lumpsum) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1280 /S004.04.10 2.500 MT

Feild Paint system as per System 1 (Tonnes) _________________________________________________________________

Supplying and applying FIELD PAINT SYSTEM ofapproved quality and shade as per Sl. No. 10.2 of Table10.0 of EIL Specification No. 6-79-0020 (or as per JobSpecifications, wherever applicable) over the coat of shopprimer already applied, including storage, surfacepreparation, degreasing, cleaning, drying, providingnecessary arrangement for access, testing etc. includingtouching up of shop primer coat as per Sl. No. 7.2.1 ofTable 7.2 of EIL Specification No. 6-79-0020 (or as perJob Specifications, wherever applicable), for steelstructures (excluding ladders, spiral stairways & handrails) at all location & levels, all complete as specified, inOFFISTE (COASTAL) areas as well as UNIT (COSTAL)areas considering environmental classification asINDUSTRIAL MARINE. SUPPLY OF ALL MATERIAL INCONTRACTOR'S SCOPE. (Unit rate based on Structuralsteel weight) _________________________________________________________________



MISCELLANEOUS STEEL WORKS SPECIFICATIONS (Lumpsum) _________________________________________________________________

MISCELLANEOUS STEEL WORKS (REFERSPECIFICATIONS NO. 6-68-0008)

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1300 /S006.15.01 0.500 MT

THREADED ANCHOR BOLTS-CONTRACTOR SUPPLY (Tonnes) _________________________________________________________________

Supplying, fabricating, fixing and keeping in position at alllevels and locations THREADED ANCHOR BOLTS of alldiameters and nomenclature including nuts, washers,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________anchor plates, pipe sleeves etc. in foundations, columns,pedestals, slabs, beams, walls etc. or any other place asdirected including handling & transporting, straightening ifrequired, turning from relevant size M.S. rounds torequired diameter, threading, welding, providingnecessary templates and auxilliary dummy structures, ifany, necessary tying and welding with reinforcement,adjustment of shuttering & reinforcement/any otherfixture, greasing exposed metal surfaces, covering boltsand packing the sleeves with jute cloth etc. all completeas specified and directed.(SUPPLY OF ALL MATERIALSIN CONTRACTOR'S SCOPE)._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1310 /S006.16.01 0.500 MT

S/T/S/F/ MS METAL INSERT (with lugs) - N (Tonnes) _________________________________________________________________

Supplying, transporting, storing, fabricating and fixing inposition M.S. METAL INSERT (with lugs) of any shapemade out of flats, plates, rolled sections, pipes etc.providing necessary templates, staging, cutting,straightening, if required, bolting, welding as required andembedding in position on both Plain and ReinforcedCement concrete members inclusive of adjustingshuttering & reinforcement/ any other fixture, weldingwhere necessary, tying and holding to correct level, lineand position, any auxiliary dummy structures to supportthe heavy inserts, painting exposed surfaces with a coatof primer as per EIL Specification No. 6-79-0020 (or asper Job Specification wherever applicable), etc. allcomplete for all depths and heights as specified anddirected. (SUPPLY OF ALL MATERIALS INCONTRACTOR'S SCOPE). _________________________________________________________________



GI Pipe Sleeves - Non FIM Items (Lumpsum) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1330 /S006.17.01 0.500 MT

S/F PIPE SLEEVES of all diameters (Tonnes) _________________________________________________________________

Supplying, fabricating and fixing in position G.I. PIPESLEEVES of all diameters including providing necessarystaging, cutting, straightening if required, bolting, weldingas required and embedding in position on both Plain andReinforced Cement concrete members inclusive ofadjusting shuttering & reinforcement/any other fixture,welding where necessary, tying and holding to correctlevel, line and position, any auxilliary dummy structures tosupport heavy sleeves etc. all complete for all depths andheights as specified and directed. _________________________________________________________________



Chemical Anchor Fastner (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1350 /S006.26.02 10 EA

"S/F Chemical anchors-MS -16 mm Dia (each) _________________________________________________________________

Supplying, handling, transporting to site of work and fixingapproved CHEMICAL ANCHOR FASTENERS consistingof M.S. threaded rod of Grade 5.8, GALVANIZED withminimum thickness of 5 microns and chemical (approvedfor use in cracked concrete), packed in flexible chemicalfoil or dual foil type, to be used with the help ofdispenser, of 16mm dia. at specified positions onconcrete floors, roofs, beams (sides and bottom), walls,columns etc. according to manufacturer's specificationsincluding all accessories like nuts, washers etc. ofrequired size., testing, necessary scaffolding, drilling ofthe holes in concrete surface with electric drill, cleaning ofholes with air blowout & wire-brush and making good any



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________damage done to the structure etc. all complete for allheights, depths and locations as specified and directed. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1360 /S006.26.03 10 EA

"S/F Chemical anchors-MS -20 mm Dia (each) _________________________________________________________________

Supplying, handling, transporting to site of work and fixingapproved CHEMICAL ANCHOR FASTENERS consistingof M.S. threaded rod of Grade 5.8, GALVANIZED withminimum thickness of 5 microns and chemical (approvedfor use in cracked concrete), packed in flexible chemicalfoil or dual foil type, to be used with the help ofdispenser, of 20mm dia. at specified positions onconcrete floors, roofs, beams (sides and bottom), walls,columns etc. according to manufacturer's specificationsincluding all accessories like nuts, washers etc. ofrequired size., testing, necessary scaffolding, drilling ofthe holes in concrete surface with electric drill, cleaning ofholes with air blowout & wire-brush and making good anydamage done to the structure etc. all complete for allheights, depths and locations as specified and directed. _________________________________________________________________



DEMOLISHING AND DISMANTLING (REFER SPEC (Lumpsum) _________________________________________________________________

DEMOLISHING AND DISMANTLING (REFERSPECIFICATION NO. 6-68-0012) _________________________________________________________________



Brickwork - Non FIM Items (Lumpsum) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1390 /S010.01.02 55.000 M3

for all heights above plinth level (Cubic meter) _________________________________________________________________

Demolishing BRICKWORK (taking all necessary safetyprecautions) for all heights above plinth level includingsupply of all tools and tackles, necessary scaffolding,propping, underpinning, cleaning and stacking ofserviceable material, disposal of unserviceable materialto spoil heaps anywhere within the plant boundary, allcomplete as specified and directed._ _________________________________________________________________



RCC - Non FIM Items (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1410 /S010.02.01 50.000 M3

For all depths below plinth level (Cubic meter) _________________________________________________________________

Demolishing RCC WORK (taking all necessary safetyprecautions) for all depths below plinth level includingsupply of all tools & tackles, necessary scaffolding,propping, underpinning etc., cutting, straightening,scraping and cleaning of reinforcement bars, stacking ofserviceable materials, disposal of unserviceable materialto spoil heaps anywhere within the plant boundary, allcomplete as specified and directed. (Excavation &backfilling shall be paid separately under relevantitems). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1420 /S010.02.02 85.000 M3

For all heights above plinth level (Cubic meter) _________________________________________________________________

Demolishing RCC WORK (taking all necessary safetyprecautions) for all heights above plinth level including



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________supply of all tools & tackles, necessary scaffolding,propping, underpinning etc., cutting, straightening,scraping and cleaning of reinforcement bars, stacking ofserviceable materials, disposal of unserviceable materialto spoil heaps anywhere within the plant boundary, allcomplete as specified and directed._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1430 /S010.02.03 10 M2

Chgipping Upto & inclusive of 25mm thick (Square meter) _________________________________________________________________

Chipping of RCC WORK (taking all necessary safetyprecautions) by CHISELLING, upto & inclusive of 25mmthickness including supply of all tools & tackles,necessary scaffolding, propping, underpinning etc.,cutting, lapping/welding of reinforcement bars as perdrawings, disposal of the unserviceable material to spoilheaps anywhere within the plant boundary, all complete atall heights and depths, as specified and directed.(Excavation and backfilling shall be paid separately underrelevant items). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1440 /S010.02.04 10 M2

Beyond 25mm and upto & inclusive of 50mm (Square meter) _________________________________________________________________

Chipping of RCC WORK (taking all necessary safetyprecautions) by CHISELLING, beyond 25mm and upto &inclusive of 50mm thickness including supply of all tools &tackles, necessary scaffolding, propping, underpinningetc., cutting, lapping/welding of reinforcement bars as perdrawings, disposal of the unserviceable material to spoilheaps anywhere within the plant boundary, all complete atall heights and depths, as specified and directed.(Excavation and backfilling shall be paid separately underrelevant items)._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




1450 /S010.02.05 10 M2 Beyond 50mm and upto & inclusive of 100m (Square meter)

_________________________________________________________________Chipping of RCC WORK (taking all necessary safetyprecautions) by CHISELLING, beyond 50mm and upto &inclusive of 100mm thickness including supply of all tools& tackles, necessary scaffolding, propping, underpinningetc., cutting, lapping/welding of reinforcement bars as perdrawings, disposal of the unserviceable material to spoilheaps anywhere within the plant boundary, all complete atall heights and depths, as specified and directed.(Excavation and backfilling shall be paid separately underrelevant items)._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1460 /S010.02.06 0.250 M3


Chipping of RCC WORK (taking all necessary safetyprecaution) by CHISELLING for thickness more than100mm for all depths below plinth level including supplyof all tools & tackles, scaffolding, propping, underpinning,etc. exposing, cutting, lapping/welding the reinforcementbars as per drawings & cleaning the same by wirebrushing, washing the exposed surfaces, disposal of theunserviceable material to spoil heaps anywhere within theplant boundary, all complete as specified and directed.(Excavation and backfilling shall be paid separately underrelevant items)._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1470 /S010.02.07 0.250 M3


Chipping of RCC WORK (taking all necessary safetyprecaution) by CHISELLING for thickness more than100mm for all heights above plinth level including supplyof all tools & tackles, scaffolding, propping, underpinning,etc. exposing, cutting, lapping/welding the reinforcementbars as per drawings & cleaning the same by wirebrushing, washing the exposed surfaces, disposal of the



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________unserviceable material to spoil heaps anywhere within theplant boundary, all complete as specified and directed _________________________________________________________________



PCC _ Non FIM Items (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1490 /S010.04.01 1.000 M3


Demolishing PLAIN CEMENT CONCRETE work (takingall necessary safety precautions) for all depths belowplinth level including supply of all tools & tackles,necessary scaffolding, propping, underpinning etc.disposal of unserviceable material to spoil heapsanywhere within the plant boundary, all complete asspecified and directed. (Excavation and backfilling shallbe paid separately under relevant items)_ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1500 /S010.04.02 0.500 M3


Demolishing PLAIN CEMENT CONCRETE work (takingall necessary safety precautions) for all heights aboveplinth level including supply of all tools & tackles,necessary scaffolding, propping, underpinning etc.disposal of unserviceable material to spoil heapsanywhere within the plant boundary, all complete asspecified and directed._ _________________________________________________________________





Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Steelwork - Non FIM Items (Lumpsum)

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1520 /S010.06.01 1.000 MT

Dismantling bolted/rivetted/welded STRUC (Tonnes) _________________________________________________________________

Dismantling bolted/rivetted/welded STRUCTURALSTEEL WORK of all descriptions (taking all necessarysafety precautions), including supply of all tools andtackles, consumables, necessary scaffolding etc.,providing temporary bracings as required, cutting (byflame or saw) gusset plates, bolts, nuts, weldings etc.,transporting and stacking of the serviceable materials,cleaning the site of work of all unserviceable materials fordisposal to spoil heaps anywhere within the plantboundary, all complete at all depths and heights, asspecified and directed._ _________________________________________________________________



MISCELLANEOUS ITEMS (REFER SPECIFICATION (Lumpsum) _________________________________________________________________

MISCELLANEOUS ITEMS (REFER SPECIFICATIONNO. 6-68-0013) _ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1540 /S011.06.01 30.000 M3

Supplying and filling SAND specified qua (Cubic meter) _________________________________________________________________

Supplying and filling approved SAND of specified qualityunder floors, in foundations, plinths, tank foundations etc.for all depths and heights including cost of sand,royalties,transportation to site for all leads and lifts,includingloading, unloading, spreading in layers of loose thicknessnot exceeding 150 mm,watering,ramming,compactingwith mechanical compactors and/or other equipment tothe specified levels to achive 85% relative density as per



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________IS:2720 Part XIV,including preparation of subgrade to therequired slope,providing testing apparatus and testing thedegree of consolidation all complete as per drawings,specifications and direction of Engineer-in-charge.Therates shall be inclusive of the cost of alllabour,material,equipments etc. all complete . _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1550 /S011.07.01 2 M2

Providing and laying 40mm thick DAMP PRO (Square meter) _________________________________________________________________

Providing and laying 40mm thick DAMP PROOFCOURSE with plain cement concrete of nominal mix of1:1.5:3 with 10mm & down size graded crushed stoneaggregates in two layers of 20mm thick with two coats ofhot bitumen (Grade A90/S90 conforming to IS:73) applied@ 1.7 Kg/sq.m. over each layer as per specificationsincluding cleaning, watering the top surface of walls,centering, shuttering, placing, tamping, curing, sprinklingan even layer of dry & sharp sand over the hot bitumenetc. all complete as specified and directed._ _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1560 /S011.10.01 525.000 KG

S&M Bi-polar CPCIA - NonFIM (Kilogram) _________________________________________________________________

BI-POLAR CONCRETE PENETRATING CORROSIONINHIBITING ADMIXTURESupplying and mixing of approved brand of BI-POLARCONCRETE PENETRATING CORROSION INHIBITINGADMIXTURE in concrete as per manufacturer'sspecification for protection of reinforcement againstcorrosion. Supply of admixture in Contractor's scope. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1570 /S011.11.03 300 M2

Supplying & Applying Coaltar-epoxy coati (Square meter) _________________________________________________________________



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Anti-fungal/ Anti-corrosive/ Coaltar-epoxy coating - Non-FIM ItemsSupply and Applying Coal Tar Epoxy after surfacepreparing including storage, degreasing, drying providingtemporary staging, scaffolding, testing etc. on all externalconcrete surfaces in substructure as per EIL StandardSpecification 6-79-0020 (or as per Job Specification,wherever applicable). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1580 /S014.01.01 20.000 KG

Providing and applying approved EPOXY RE (Kilogram) _________________________________________________________________

BONDING FRESH CONCRETE TO OLD CONCRETEBY EPOXY RESIN BONDING SYSTEM (REFERSPECIFICATION NO. 6-68-0056) _Epoxy Resin - non FIM Items_Providing and applying approved EPOXY RESIN(prepared as per manufacturer's recommendation) forbonding of fresh concrete to old concrete in all types ofstructure at all depths and heights including cleaning ofconcrete surface, removing of all loose concrete pieces,making rough by chiselling, taking off the skin ofconcrete, application of Epoxy Resin System by spraying,necessary working platforms, props, scaffolding and othersafety measures, removal of same after completion etc.all complete as specified and directed. (Excavation,backfilling, removal of surplus earth, keeping pit dry bypumping/bailing subsoil water shall be paid separatelyunder relevant items). _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1590 /S019.01.01 2.000 M3

Hollow Conc Block (Closed Cavity) Gr A ( (Cubic meter) _________________________________________________________________

CONCRETE BLOCK MASONRY (REFERSPECIFICATION NO. 6-68-0016)Hollow Conc Block (Closed Cavity) Grade A (5.5) - NonFIM ItemProviding and laying CONCRETE BLOCK MASONRYwith HOLLOW CONCRETE BLOCKS of Grade A (5.5)



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Close Cavity, in cement mortar 1:6 (1 Cement : 6 CoarseSand) in one or more block thickness and in any shape(excluding circular/ curved block masonry) at all depthsbelow plinth level including the cost of materials, labour,scaffolding/ staging, sampling & testing, soaking ofblocks, cutting and laying of blocks, providing recesses,making openings of any shape & size, finishing the jointsflush below ground level and raking out the joints aboveground level, sealing the gap between masonry and soffitof beam/slab, filling the blocks with mortar at specifiedlocations, supplying and placing 8 mm dia tor steel ties atintersection at every fourth course, embedding the fittings& fixtures, curing, etc. all complete as per specifications.ALL MATERIALS INCLUDING CEMENT SUPPLIED BYTHE CONTRACTOR. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1600 /S019.01.02 40.000 M3

Hollow Conc Block (Closed Cavity) Gr A ( (Cubic meter) _________________________________________________________________

CONCRETE BLOCK MASONRY (REFERSPECIFICATION NO. 6-68-0016)Hollow Conc Block (Closed Cavity) Grade A (5.5) - NonFIM ItemProviding and laying CONCRETE BLOCK MASONRYwith HOLLOW CONCRETE BLOCKS of Grade A (5.5)Close Cavity, in cement mortar 1:6 (1 Cement : 6 CoarseSand) in one or more block thickness and in any shape(excluding circular/ curved block masonry) at all heightsabove plinth level including the cost of materials, labour,scaffolding/ staging, sampling & testing, soaking ofblocks, cutting and laying of blocks, providing recesses,making openings of any shape & size, finishing the jointsflush below ground level and raking out the joints aboveground level, sealing the gap between masonry and soffitof beam/slab, filling the blocks with mortar at specifiedlocations, supplying and placing 8 mm dia tor steel ties atintersection at every fourth course, embedding the fittings& fixtures, curing, etc. all complete as per specifications.ALL MATERIALS INCLUDING CEMENT SUPPLIED BYTHE CONTRACTOR. _________________________________________________________________





______________________________________________________________________________________________________________________________________________Informatory item_______________________________________________________________________ 1610 /GC LS

GENERAL CIVIL (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1620 /C008.01.01 50.000 M3

RCC of M-30 grade concrete (Cubic meter) _________________________________________________________________

CONCRETE PAVEMENTS (SPEC NO.6-65-0019) _Providing and laying Reinforced cement concrete with20mm and down size graded crushed stone aggregatesin flooring, pavements etc. including leaving pockets, ifnecessary, making recess/drains, laying in alternatepanels, etc. for all depths including shuttering, tamping,curing, etc. as specified in any shape, thickness, positionand finishing the top surface smooth etc. all complete asper drawings, specifications and directions of Engineer-in-Charge (excluding cost of providing and fixingreinforcement & joint sealing). _For RCC of M-30 grade concrete( Cement supplied free of cost by the Owner) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1630 /C008.05.01 40 M

Type-I pavement (including supply of M (Meter) _________________________________________________________________

Providing 20mm wide Expansion Joints in pavementslabs as per std. No.7-65-0404 including cleaning thejoints of all loose material, filling with 20mm thickimpregnated fibre boards for the full depth of slab exceptfor 25mm depth from top and sealing the top 25mm wthapproved Joint Sealing Compound as per IS:1834 Type-Betc. all complete as per drawings, specifications anddirections of Engineer-in-Charge. _For type-I pavement (Upto and inclusive of thickness of200 mm). (Including providing and laying MS dowel bar,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________painting as required, GI pipe and cap and cotton waste). _________________________________________________________________


______________________________________________________________________________________________________________________________________________Informatory item_______________________________________________________________________ 1640 /C012.00.00 LS

U/G AND A/G G.I. PIPELINE SYSTEM - W (Lumpsum) _________________________________________________________________



S/L above ground MS galvanised pipes (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1660 /C012.03.01V02 10 M

Nom. Dia 50 mm , Pipe class J2A , - No (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1670 /C012.03.01V03 10 M



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1680 /C012.03.01V19 10 M



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1690 /C012.03.01V20 10 M



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Nom. Dia 20 mm , Pipe class J2A , - No (Meter)

_________________________________________________________________



S/L MS gal-pipes in all types of soil ex (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1710 /C012.04.01V02 20 M




MISC. CIVIL AND STRUCTURAL WORKS FOR U/ (Lumpsum) _________________________________________________________________



UNDERGROUND SEWER SYSTEM - RCC PIPES (Lumpsum) _________________________________________________________________



S/L RCC pipes in soils including soft ro (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




1750 /C027.07.01V01 20 M Dia (Internal) 150 mm , Piping Material (Meter)

_________________________________________________________________



UNDERGROUND SEWER SYSTEM-HDPE PIPES (Lumpsum) _________________________________________________________________



S/L U/G HDPE pipes in all type of soil (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1780 /C029.03.01V02 10 M

Dia (Internal) 80 mm , Pressure Rating 2 (Meter) _________________________________________________________________



PLUMBING AND BUILDING DRAINAGE (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1800 /C034.01.00 10 EA

S/F CI Floor/Nahani Trap for 100mm inle (each) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1810 /C034.02.00 10 EA

S/F Floor/Nahani for 100mm inlet and (each) _________________________________________________________________



S/F gun metal globe valve (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1830 /C034.07.01V02 1 EA

Dia 50 mm , - Dia 50 mm , (each) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1840 /C034.07.01V03 1 EA

Dia 25 mm , - Dia 25 mm , (each) _________________________________________________________________



Construction of soak pit (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1860 /C034.14.01V06 1 EA

Users 25 NO , - Users 25 NO , (each) _________________________________________________________________






Construction of masonry valves chamber (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1880 /C034.19.01V13 1 EA

Dia 50 mm , Brick Class 3.5 (each) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1890 25 M

PROV. LAYING RCC HUME PIPE 200-300MM (Meter) _________________________________________________________________

Providing and laying RCC hume pipe Class NP3 including jointing and testingfor 200mm-300 mm dia.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1900 200 M

PLUMBING & SANITAT ALL MATERIALS 15-25MM (Meter) _________________________________________________________________

Providing & Fixing GI pipes of 1 TO 25 mm NB and fittings in floor, ceiling,wall or along roads with fitting including supply of all materials pipes & GIassorted fittings. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1910 5 EA

PLUMBING :P/F-Brass full way valve-15-25 (each) _________________________________________________________________

PLUMBING & SANITATION



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Providing and fixing brass full way valve with wheel ofapproved quality.15mm-25mm nominal bore _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1920 500 INM

Signwriting-BPCL LOGO & lettering (Inch Meter) _________________________________________________________________

Signwriting including painting of standard BPCL logo at all heights. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1930 25 NO

SEPTIC TANK (Number) _________________________________________________________________

Supplying of RCC hume pipe septic tank of required capacity includingtransportation, unloading and erection at site as per direction of engineer incharge. payment shall be made on the basis of capecity of the tank in no. ofusers. _________________________________________________________________



Providing stoneware Gully Trap (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1950 /C034.21.02V01 2 EA

All materials including cement supplied (each) _________________________________________________________________



Construction of inspection chamber/ manh (Lumpsum)




_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1970 /C034.22.01V02 2 EA

Cement supplied free of cost by owner an (each) _________________________________________________________________



Overhead Drinking Water Tank (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1990 /C176.01.00V02 1 EA

Capacity 1000 Litres , - Capacity 1000 (each) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2000 /C999.99.99V02 1 LS

CLEAN AGENT SYSTEM (Lumpsum) _________________________________________________________________

Design, engineering, supply of all materials, fabrication,performance guaranteeing of total flooding centralizedclean agent fire extinguishing system for the ControlRoom Building (RackRoom, UPS Room, & Battery Room of building)mentioned below, including supply of any one of thefollowing Clean Agents:a) IG-01 (ARGON)b) IG-55 (ARGONITE)c) IG-100 (NITROGEN)d) IG-541 (INERGEN)Clean Agent Storage Cylinders (filled with any one of theabove selected Inert Gas filled with 100% filled upstandby cylinders), piping, valves, Clean Agent discharge



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________nozzles, instruments, Clean Agent panels, pipingsupports, release system, directional valves, cables etc.System supplied and design calculations shall beapproved by UL/FM/Vds/LPC. All equipments shall beapproved by UL/FM/Vds/LPC and cylinder along withcylinder valve assemblies shall be seamless and PESOapproved. The entire clean agent system shall be as perNFPA-2001 (latest) complete as per scope of work,specification and Arch./Strl. drawings. Handling,transportation from vendor's workshop to site, storage atsite, assembly at site, installation, erection, testing,precommissioning,painting, commissioning, puff test,performance guarantee run, handing over to client andother field works including civil structural work and supplyof commissioning spares as per the enclosed EILstandard specifications, instructions to vendors, and datasheets etc. Supply of mandatory spares as per enclosedlist/ instructions to vendor as per scope of work andspecification, drawings and documents as per attachedvendor Data requirement for all supplies and services etc.complete. (Bidder / Contractor note that 300bar totalflooding system shall be considered in the Satellite RackRoom Building) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2010 30 M2

P/F Gypsum board Partition - 75 mm thick (Square meter) _________________________________________________________________

Providing and fixing partition upto ceiling height consistingof G.I. frame and required board, including providing andfixing of frame work made of special section powerpressed/ roll form G.I. sheet with zinc coating of 120gms/sqm(both side inclusive), consisting of floor andceiling channel 50mm wide having equal flanges of 32mm and 0.50 mm thick, fixed to the floor and ceiling atthe spacing of 610 mm centre to centre with dashfastener of 12.5 mm dia meter 50 mm length or suitableanchor fastener or metal screws with nylon plugs and thestuds 48 mm wide having one flange of 34 mm and otherflange 36 mm and 0.50 mm thick fixed vertically withinflanges of floor and ceiling channel and placed at aspacing of 610 mm centre to centre by 6 mm dia boltsand nuts, including fixing of studs along both ends of



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________partition fixed flush to wall with suitable anchor fastener ormetal screws with nylon plugs at spacing of 450 mmcentre to centre, and fixing of boards to both side offrame work by 25 mm long dry wall screws on studs, floorand ceiling channels at the spacing of 300 mm centre tocentre. The boards are to be fixed to the frame work withjoints staggered to avoid through cracks, M.S. fixingchannel of 99 mm width (0.9 mm thick having two flangesof 9.5 mm each) to be provided at the horizontal joints oftwo boards, fixed to the studs using metal to metal flathead screws, including jointing and finishing to a flushfinish with recommended jointing compound,jointing tape,angle beads at corners (25 mm x 25 mm x 0.5 mm), jointfinisher and two coats of primer suitable for board as permanufacture¿s specification and direction of engineer incharge all complete.75mm overall thickness partition with 12.5 mm thickdouble skintapered edged plain Gypsum boardconforming to IS: 2095: part I _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2020 10 M2

STORAGE UNITS (Square meter) _________________________________________________________________

Storage Units with variable height and suitable width of given size havingpostforming top, Non-postfomed sides and sliding/openable shutters in18/19-mm thick Marine Ply with both side laminate in approved shade oflaminate with sliding shutters/openable 18-mm thick marine play in approvedshade of laminate. The unit to have shelf of 18/19 mm thick marine play inapproved shade of laminate. The unit to have 4" TO 5" high skirting inapproved shade of laminate. The unit to have backer laminate from inside. Thetop shall have post formed edge other edges shall have matching lipping on allexposed surfaces. The units shall have best quality hardware, locks, hindges,handles, etc as approved by BPCL. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2030 10.000 M3

P/L Brick Masonry (Cubic meter) _________________________________________________________________

Providing and laying brick masonry with locally availablebricks of class 3.5 in cement mortar 1:4 (1



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________cement : 4 Coarse sand) in one or more brick thickness, Brick skirting and inany shape in foundation and plinth for valve pits, drains, circular/squaremaholes, wing walls, etc. including providing recesses, openings, etc.including curing,finishing the joints flush at all levels and raking outjoints in plinth with all labour and material, etc. completeas per drawings, specifications and direction of Engineerin-Charge _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2040 50 NO

Core cutter drilling 150mm (Number) _________________________________________________________________

Core cutter drilling 100mm to 150mm through concrete Slabs / Beams / Columnswith Hilti Diamond bit cutter up to 200 mm thickness of section at all levels.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2050 50 NO

Core cutter drilling 200mm (Number) _________________________________________________________________

Core cutter drilling 151 mm to 200mm through concrete Slabs / Beams / Columnswith Hilti Diamond bit cutter up to 200 mm thickness of section at all levels.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2060 25 M2

P/F Hard. Sheet (Square meter) _________________________________________________________________

Providing and fixing hardner sheet of 4 mmthickness in aluminium door, window, ventilator shutters and partitions etc.with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and thedirections of engineer-in-charge. (Cost of aluminium snapbeading shall be paid in basic item for aluminium work) _________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2070 2 NO

P & Installation 25 Ltr Capicity Gyser (Number) _________________________________________________________________

Providing and installation of 25 litre capacity geyser of Racold or equivalentas approved by BPCL _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2080 1 NO

P/F Inaugural Plaque (Number) _________________________________________________________________

Providing and fixing inaugral plaque of 20-25 mm thick granite with goldenengraved text including BPCL logo.Approximate size should 900 x 600mm. Variation in the area of the plaque shallbe paid on proportionate basis. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2090 500 S08

Manpower supply - Helper (Shift of 8 Hours) _________________________________________________________________

Contractor to quote for 8 hours shift.Assistance by contractor's experienced skilled/un-skilled workmen such asmason, plumber, carpenter,etc. for carrying out jobs of miscelleanous naturethe scope for which is not specifically covered in SOR and required to carryout to complete the job. The rate includes provision and use of allconsumable, tools and tackles required for specified activity and contractorshall arrange the same without any extra cost to BPCL.Contractor shall get the certification done from BPCL/EIC for daily assistanceof helpers clerarly indicating nature of job carried out including workinghours. Any decrease/increase with respect to standard 08 working hours shiftshall be paid on pro-rata basis. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2100 5.000 MT



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________S/F Galavanized Structural Steel Support (Tonnes)

_________________________________________________________________Providing and fixing galvanised structural steel supports for Instrumentationpanel supports below false flooring Thickness of galvanized coating should be120micron minimum.

Supplying,developing fabrication drawings, fabricating & erecting in positionbolted / welded 120 microns thick Hot dipped galvanised Structural Steelmembers at all levels including all built up sections/ compound sections usingM.S. rolled section/ plates/ chequered plates etc. conforming to IS:2062 andrelevent IS specifications in various steel structures like mono rail,brackets, catladder, beams, columns, trusses, bracing's, approach platform orany other structure, including transporting fabricated structural steel fromthe contractor's workshop outside refinery to the site of work insiderefinery, cutting, finishing edges by grinding, fixing in line & level withtemporary staging & removal of the same aftererection, grouting with Non shrink grout,at site etc all complete. NOTE:(1)Fabrication shall be carried out in contractor's workshop located outside theRefinery but within municipal limits of Mumbai,Navi Mumbai and Thane area. (2)Structural steel shall be of approved make like TISCO, IISCO, MUKUND, ESSAR,SAIL or equivalent. 3) All fillet welds shall be of minimum 8 mm thickness. 4)Contractor shall have to prepare fabrication drawings on AUTOCAD in original"Dwg" format based on colour codes and layer concept basis and submit the sameto BPCL in CD and on hard copy(one set) all such "As built" fabrication drawings.The rate includes fixing the fabricated and galvanized structural supports byproviding and fixing mechanical anchor fastners of rrequired sizes. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 2110 1 LS

MCGM Approval (Lumpsum) _________________________________________________________________

Service charges for obtaining various clearances/approvals from MunicipalCorporation of Greater Mumbai (MCGM) like (1) IOD from MCGM, (2) Commencementcertificate for beginning of the job from MCGM, (3) Approval for layouts, (4)Occupation certificate and (5) Building completion certificate from MCGM.For obtaining above, the contractor shall appoint an Architect who shallprepare all drawings and RCC specialist who shall submit design calculationsto MCGM as per their standard format. Note : (1) Mode payment shall be lumpsum for obtaining all clearances/approvals from Municipal Corporation ofGreater Mumbai (MCGM) for extension of RMP control room Building (2) Thepayment made to the local statutory authorities shall be reimbursed by BPCL onactual basis on receipt of documentary evidences/ submission of original



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________receipts over and above the payment against this item. _________________________________________________________________


_______________________________________________________________________Service Tax%____________ VAT%________________ CST%________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________00020 GTU SRR - Elect & HVAC works 08.05.2017_______________________________________________________________________ The item 00020 covers the following services:Informatory item_______________________________________________________________________ 10 NO

ELECTRICAL (Number) _________________________________________________________________


______________________________________________________________________________________________________________________________________________Informatory item_______________________________________________________________________ 20 NO

MISCELLANEOUS CONTROL GEAR (Number) _________________________________________________________________



I/T/C of Ind/FLP CONTRIOL GEAR (Number) _________________________________________________________________

"Installation, testing and commissioning of miscellaneoussurface mounted industrial/FLP control gear such aslighting/power panel, push button stations, motor starter,communication equipment, junction boxes, panels, plugs,sockets, including supply of necessary hardware, touchup painting including supply of paint, includingtransportation from store/yard to site at the place ofinstallation, unpacking, (excluding fixing of cable glandsand cable terminations), including all labour andmaterials, as per approved drawings, specifications ofthis tender and directions of Engineer-in-Charge."

_________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 40 5 NO

Weight of the unit up to 5 kg. (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 50 5 NO

Weight of the unit above 5 kg. but upto (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 60 2 NO

Weight of the unit above 20 kg. but upto (Number) _________________________________________________________________

Weight of the unit above 20 kg. but upto 100 kg. _________________________________________________________________



PLUGS, SOCKETS AND JUNCTION BOXES (Number) _________________________________________________________________



S/I/C of WP plug-socket units (Number) _________________________________________________________________

"Supply of weatherproof metal clad 415V, TPN, industrialtype socket and plug with heavy duty interlocking switch,with adequately sized cable adaptor box for incoming andoutgoing cable terminations, including supply of doublecompression brass nickel plated cable glands, tinnedcopper lugs, including all labours and materials, as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge."

_________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 90 2 NO

63 A, 415 V, 5 pin sockets. (Number) _________________________________________________________________


______________________________________________________________________________________________________________________________________________Informatory item_______________________________________________________________________ 100 M

G.I. & PVC PIPES (Meter) _________________________________________________________________



Supply & Laying of GI pipes (Meter) _________________________________________________________________

"Supply and laying of following sizes of G.I. Pipes(medium) in required length fixed on steel, concrete orsimilar structure, laid in trenches, ready to be buried inconcrete including cutting, threading, bending and similarworks, supply of clamps, small iron structures, spacersand installation of seats, plugs, bushings etc., small civilworks, including all labour and materials, as per approveddrawings, specifications of this tender and directions ofEngineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 120 50 M

50 mm NB. (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




130 60 M 100 mm NB. (Meter)

_________________________________________________________________



MARKERS (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 150 10 NO

Supply and installation of earth pit mar (Number) _________________________________________________________________

"Supply and installation of earth pit markers for directlyburied GI pipe electrodes with 14 SWG enamelled steelplate engraved with white letters BURIED, EARTH ELECTRODE on JADE greenbackground complete withsupport and foundation as per approved drawings,specifications of this tender and direction of Engineer-in-Charge."

_________________________________________________________________



HAZ. AREA LTG FIXT. & ACC. (Number) _________________________________________________________________

HAZARDOUS AREA LIGHTING FIXTURES ANDACCESSORIES _ _________________________________________________________________



I/T/C of FLP Ltg fixture & acc. (Number) _________________________________________________________________

Installation, connection, testing and commissioning offollowing types of flame proof/Div.2 lighting fixtures and



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________accessories, including cable termination and connection,fixing of cable glands, lugs, including supply of necessaryhardwares, including transportation from store/yard to siteat the place of installation, unpacking, including all labourand materials, as per approved drawings, specificationsof this tender and directions of Engineer-in-Charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 180 6 NO

Flood Ltg. fixture (Number) _________________________________________________________________

Flood light fixtures. _________________________________________________________________



Supply of FLP/Div-2 Ltg fixture (Number) _________________________________________________________________

Supply of following FLP/Div.2 lighting fixtures completewith lamps, requisite FLP cable glands, plugs andnecessary control gear as per EIL standard specificationNo. 6-51-0061, data sheet for lighting fixture schedule,including all albourand materials, specifications of this tender and directions ofEngineer-in-Charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 200 6 NO

FLP-LED-FD fixture min 105W (Number) _________________________________________________________________

Type FLP-LED-FD Fixtures (min. 105W) GAS GROUP IIA/IIB, TEMP. CLASS T3 _________________________________________________________________



SAFE AREA LIGHTING FIXTURES (Number) _________________________________________________________________






S/I/T/C of Lighting fixtures (Number) _________________________________________________________________

"Supply, installation, testing and commissioning offollowing lighting fixtures and connecting to wiring junctionbox/marshalling box complete with lamps and necessarycontrol gear including supply of all connected materialslike flexible conduit, clamps, supports, chains, anchorfastners, bolts, nuts and washers etc. as required,including supply and fixing of cable glands, lugs, includingall labour and materials, as per approved drawings, datasheet for lighting fixture schedule, EIL installationstandards, specifications of this tender and directions ofEngineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 230 2 NO

Type SFD 12 Fixtures. (Number) _________________________________________________________________

Fixture type - SFD12Description - ceiling/wall mounting fixture with prismatic glass cover.Wattage - 1x60 W/ 1x100 W

Manufacturer - Crompton IBH-1110BCPHILIPS FXC101Bajaj BJDB-100 or equivalent

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 240 10 NO

Type RSD 10 Fixtures. (Number) _________________________________________________________________

Fixture type - RSD10Description - Recess mounting down-lighter fixture with 60/100W incandescentlamp.



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Wattage - 1x60 W/1x100 W

Manufacturer - Philips DN 622, Crompton DDLV 10BC, Bajaj BJDR 100 orequivalent

_________________________________________________________________



S/I/T/C of Enrg. effic. Ligt. fixture (Number) _________________________________________________________________

"Supply, installation, testing and commissioning offollowing energy efficient lighting fixtures and connectingto wiring junction box/marshalling box complete withlamps and necessary control gear including supply of allconnected materials like flexible conduit, clamps,supports, chains, anchor fastners, bolts, nuts andwashers etc. as required, including supply and fixing ofcable glands, lugs, including all labour and materials, asper approved drawings, data sheet for lighting fixtureschedule, EIL installation standards, specifications of thistender and directions of Engineer-in-Charge"

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 260 25 NO

Type INDLED 1 Fixtures. (Number) _________________________________________________________________

Fixture type -INDLED1



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Description - Mounting rail type fixture suitable for1x19 W LED lamp made of stove enamel finish MS sheet steel housing.Wattage - 1 x 19 W

Manufacturer -Philips-BN 108C LED 20S PSU CDL WHor equivalent

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 270 50 NO

Type LED 2 Fixtures. (Number) _________________________________________________________________

Fixture type - LED 2Discription - Recess type square (600 mm x 600 mm approx) fixture 50 W withLED light sourcehaving high efficiency low glare optics with integrated independentdriver boxWattage - 50/55 W

Manufacturer - Philips-QUADRA II Crompton-LCTLR-50-FO-CDL

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 280 10 NO

Type INDLED 2 Fixtures. (Number) _________________________________________________________________

Fixture tye - INDLED2Description - Mounting rail type fixture suitable for2x19 W or 1 x 38 W LED lamp made of stove enamel finish MS sheet steel housingWattage - 2x19 W or 1 x 38 W

Manufacturer - Philips-BN 108C LED 20S PSU CDL WHor equivalent

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




290 5 NO Type LED 5 Fixtures. (Number)

_________________________________________________________________Fixture type - LED 5Description - Recess type square (600 mm x 600 mm approx) fixture 36 W LEDFixture complete with LED Lamp, driver, including other materials asapplicable forinstallation with LED light sourcehaving high efficiency low glare optics with integrated independentdriver box.Wattage - 36 W

Manufacturer - Crompton-LCTLR-36- CDL or equivalent _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 300 10 NO


Fixture type - LED 6Description - Recess type square (600 mm x 600 mm approx) fixture but SURFACEtype with 36 W LED Fixture complete LED Lamp, driver, including othermaterials as applicable for installation.Wattage - 36 W

Manufacturer - Crompton-LCTLS-36-CDL or equivalent

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 310 5 NO


Fixture type - LED 11Description - Decorative circular (200 mm dia approx.) downlighter, surfacemounted type with LED Module, aluminium satin finished reflector,polycarbonate lenses including suitable integrated independent driverbox.Wattage - 1x9W

Manufacturer- Crompton LCD SLW-



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________10C or equivalent

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 320 5 NO


Fixture type - LED 13Decsription - LED Fixture suitable for DC Voltage complete with LEDLamp, driver, includingother materials as applicable forinstallation.Wattage - 18 W

Manufacturer - Crompton LCDV-18- CDL or equivalent _________________________________________________________________



FANS AND EXHAUST FANS (Number) _________________________________________________________________



S/I/T/C of Exhaust Fans (Number) _________________________________________________________________

"Supply, installation, connection, testing andcommissioning of following types of exhaust fansincluding supply of all necessary supports etc., includingfixing of cable glands, lugs with BEE(Bureau of EnergyEfficiency) rating of minimum 3 star including all labourand materials and accessories like mounting frame, fixingbolt, wire guard/louvres etc., as per approved drawings,specifications of this tender and directions of Engineer-in-Charge."

_________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 350 2 NO

300 mm dia., 1 phase, 900 rpm, wall moun (Number) _________________________________________________________________

300 mm dia., 1 phase, 900 rpm, wall mounting type epoxy painted exhaust fanwith louvres. CORROSION RESISTANT & CHEMICAL RESISTANT TYPE

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 360 2 NO

S/I/T/C of 1200mm sweep cein fan (Number) _________________________________________________________________

"Supply, installation, connection, testing andcommissioning of 240 V AC, 1200 mm sweep ceiling fanwith regulator (labeled as minimum 3-star by Bureau ofEnergy Efficiency)including providing clamp/hook in RCCslab, if necessary, providing, fixing, ceiling, rose, wiring,including all labour and materials, as per approveddrawings, specifications of this tender and directions ofEngineer-in-Charge."

_________________________________________________________________



SOCKETS/RECEPTACLES & SWITCH/MCB (Number) _________________________________________________________________

SOCKETS/RECEPTACLES AND SWITCHES/MCB UNITS _________________________________________________________________



S/I/T/C of switch socket unit-receptacle (Number) _________________________________________________________________

"Supply, installation, connection, testing and



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________commissioning of following ratings of 240 V, singlephase, sockets/receptacles and metallic outlet boxes asdescribed below including supply of all connectedmaterials, including all labour and materials, as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 390 10 NO

5 A, 5 pin plate type flush/ surface (Number) _________________________________________________________________

6 A, 5 pin plate type flush/ surface mounting sockets/receptacles. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 400 20 NO

15/5 A, 6 pin plate type flu (Number) _________________________________________________________________

16/6 A, 6 pin plate type flush/ surface mountingsockets/receptacles.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 410 5 NO

3 Nos., 15/5 A, 240V receptacle wi (Number) _________________________________________________________________

3 Nos., 15/5 A, 240V receptacle with 1 No., 15A plate type switchfor computer

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 420 5 NO

20 A, 3 pin surface mounted industrial t (Number) _________________________________________________________________



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________20 A, 3 pin surface mounted industrial type switch socket with plug and sheetsteel painted box.

_________________________________________________________________



S/I/T/C of 240V switch/MCB units (Number) _________________________________________________________________

"Supply, installation, connection, testing andcommissioning of following 240 V, single phaseswitches/MCB units, including outlet boxes andassociated accessories, including all labour andmaterials, as per approved drawings, specifications ofthis tender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 440 60 NO

5 A, plate type flush/surface mounted sw (Number) _________________________________________________________________

5 A, plate type flush/surface mounted swtches. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 450 20 NO

15 A, plate type flush/surface mounted s (Number) _________________________________________________________________

15 A, plate type flush/surface mounted swtches. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 460 2 NO

32A, DP MCB unit in moulded case enclosu (Number) _________________________________________________________________

32A, DP MCB unit in moulded case enclosure for window type air conditioner.




_________________________________________________________________



JUNCTION BOXES (OUTDOOR/INDOOR TYPE) (Number) _________________________________________________________________

"Supply and installation of dust and vermin proof G.I.sheet steel (1.6 mm thick) junction box WP type suitablefor outdoor/indoor installation with number of outgoingways as under, complete with PVC connectors, supplyand fixing of cable glands, including supply of requiredsize and number of terminals, including all labour andmaterials, as per approved drawings, specifications ofthis tender and directions of Engineer-in-Charge."

_________________________________________________________________



S/I/T/C of Junction Boxes (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 490 1 NO

4 way. (Number) _________________________________________________________________



S/I/T/C of Junction Boxes-15A, 20Termina (Number) _________________________________________________________________

"Supply and installation of dust and vermin proof G.I.sheet steel (1.6 mm thick) junction box suitable for indoorinstallation, complete with 15A, 20 terminals, supply andfixing of cable glands for incoming cable and knock outsfor conduit entry for outgoing circuits, including all labour



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________and materials, as per approved drawings, specificationsof this tender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 510 1 NO

Junction box. (Number) _________________________________________________________________



LIGHTING/POWER PANELS & DIST BOARDS (Number) _________________________________________________________________



S/I/T/C of Power panels & Dist boards (Number) _________________________________________________________________

"Supply, installation, connection, testing andcommissioning of safe area lighting/power panels,surface/flush mounting type, wall mounting type in dusttight (with hinged cover) sheet steel enclosure having 4pole incomer and single pole MCB (9 kA type) foroutgoing circuit control with complete wiring, including cable termination,connection and fixing of cable glands,including all labour and materials, as per approveddrawings, specifications of this tender and directions ofEngineer-in-Charge. "

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 540 1 NO

40A, 4 pole incomer MCB isolator-6 O/G (Number) _________________________________________________________________

40 A, 4 pole incomer MCB isolator and ELCB and 6 Nos. outgoing single pole



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________MCBs (upto 20 A). SENSITIVITY OF ELCB SHALL BE 300mA

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 550 3 NO

40A,4 pole incomer MCB isolator-12 O/G (Number) _________________________________________________________________

40 A, 4 pole incomer MCB isolator and ELCB and 12 Nos. outgoingsingle pole MCBs (upto 20 A). SENSITIVITY OF ELCB SHALL BE 300mA

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 560 1 NO

63A,4 pole incomer MCB isolator-18 O/G (Number) _________________________________________________________________

63 A, 4 pole incomer MCB isolator and ELCB and 18 Nos. outgoingsingle pole MCBs (upto 20 A). SENSITIVITY OF ELCB SHALL BE 300mA

_________________________________________________________________



WIRING (Meter) _________________________________________________________________



Circuit wiring with 660 V grade, (sizes (Meter) _________________________________________________________________

"Circuit wiring with 660 V grade, (sizes given below), FRLSPVC insulated copper wires in already laidsurface/concealed conduit from lighting panel/powerpanel onwards including the supply of wires, terminationand connection, including all labour and materials, as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge."




_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 590 600 M

3 Nos x 1.5 sq. mm INSULATION SHALL BE X (Meter) _________________________________________________________________

3 Nos x 1.5 sq. mm INSULATION SHALL BE XLPE. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 600 200 M




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 610 300 M




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 620 150 M




_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 630 150 M



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________7 Nos x 1.5 sq. mm INSULATION SHALL BE X (Meter)

_________________________________________________________________7 Nos x 1.5 sq. mm INSULATION SHALL BE XLPE.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 640 150 M





Circuit wiring in light panel, DBs (Meter) _________________________________________________________________

"Circuit wiring in non-hazardous areas using (size givenbelow), copper conductor, PVC insulated, FRLS outersleeve cables (third core for earthing) from lightingpanel/distribution junction box onwards including thesupply of cable, junction boxes and cable glands,including termination and connection, including all labourand materials, as per approved drawings, specificationsof this tender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 660 200 M

4 C x 2.5 sq. mm armoured Cu cables. INS (Meter) _________________________________________________________________

4 C x 2.5 sq. mm armoured Cu cables. INSULATION SHALL BE XLPE. CABLE SHALL BEARMOURED TYPE. OUTERSHEATH SHALL BE FRLSTYPE.

_________________________________________________________________






Supply & Laying of GI conduits - Surface (Meter) _________________________________________________________________

"Supply and laying of (surface type) G.I. conduit offollowing diameter and associated fittings from lighting/power, telephone, fire alarm/plant communication pointsetc., including supply ofG.I. sheet steel junction boxeswith acrylic cover, pull wire, including all labour andmaterials, as per approved drawings, specifications ofthis tender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 680 10 M

25 mm diameter. (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 690 10 M




Supply & Laying-GI conduit-Surface-Blk e (Meter) _________________________________________________________________

"Supply and laying of (surface type) approved make ofblack enamelled steel conduit of following diameter andassociated fittings from lighting/power panel, telephone,fire alarm/plant communication points etc., includingsupply of G.I. sheet steel junction boxes with acryliccover, pull wire, including all labour and materials, as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge."

_________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 710 300 M



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 720 250 M




Supply & Laying of PVC conduit-Concealed (Meter) _________________________________________________________________

"Supply and laying of (concealed type) PVC conduit offollowing diameter and associated fittings in brick walls,RCC slabs/ceilings for lighting/ power/telephone, firealarm/plant communication points etc., including supply ofG.I. sheet steel junction boxes with acrylic cover, pullwire, making cuts and chasis in built up brick work, RCCslabs/ceilings and making good the same, including alllabour and materials, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge. "

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 740 200 M






_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 750 100 M




EMERGENCY LIGHTING (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 770 4 NO

S/I/T/C of Emg. Lighting-min 5W/30L (Number) _________________________________________________________________

"Supply, installation, connection, testing andcommissioning of emergency lighting unit (min. 5W, 30lumens output) fed by a self- contained battery rated for 2 hours and chargeroperating on 240 V AC supply,including all labour and materials, as per approveddrawings, specifications of this tender and directions ofEngineer-in-Charge. "

_________________________________________________________________



EARTH ELECTRODES (Number) _________________________________________________________________



S/I/T/C of CI earth electrodes (Number) _________________________________________________________________

"Supply, installation, testing and commissioning of CastIron earth electrodes, complete with earth pit as per std.7-51-0102 and all necessary materials including



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________excavation of earth pit, filling with charcoal and salt, backfilling, providing necessary brickwork, connections,including all labour and materials, as per approveddrawings, specifications of this tender and directions ofEngineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 800 10 NO

Cast Iron earth electrode as per std. 7- (Number) _________________________________________________________________

"Cast Iron earth electrode as per std. 7-51-0102. 100 MM CAST IRON DIA. EARTHELECTRODE AS PERIS-3043 COMPLETE WITH EARTHPIT AS PER EILSTD. 7-51-0102"

_________________________________________________________________



EARTH STRIPS (Number) _________________________________________________________________



S/I/C of GI Earth strips - exposed (Meter) _________________________________________________________________

"Supply, installation and connection of following GIearthing strip along the cable trenches or cable trays orfixing to walls or structures including welding at joints,providing anti-corrosive paint or bitumen and jutecovering for welded portion, clamping and necessaryhardware for connecting, etc., including all labour andmaterials, as per approved drawings, specifications ofthis tender and directions of Engineer-in-Charge. "

_________________________________________________________________





_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 830 50 M

50 x 6 mm (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 840 250 M

25 x 3 mm (Meter) _________________________________________________________________



S/I/C of GI Earth strips - burried (Meter) _________________________________________________________________

"Supply, installation and connection of following GI earthing strip buriedindividually at a depth of 500 mmincluding welding at joints, providing anti-corrosive paintor bitumen and jute covering for welded portion, clampingand necessary hardware for connecting, excavation andrefilling etc., including all labour and materials, as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 860 200 M

50 x 6 mm (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 870 50 M



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________25 x 3 mm (Meter)

_________________________________________________________________



EARTH PLATES (Number) _________________________________________________________________



S/I/C of GI Earth plates (Number) _________________________________________________________________

"Supply, installation and connection of GI earth plates asper std. 7-51-0103, complete with anchor bolts, includingall labour and materials, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 900 8 NO

GI earth plate as per std. 7-51-0103. (Number) _________________________________________________________________



EARTHING CABLES (Meter) _________________________________________________________________



Supply of cu. cables-unarmoured (Meter)




_________________________________________________________________"Supply of 1100 V grade, multi stranded CopperConductor, XLPE/PVC insulated and unarmoured cables(with green/yellow strips or green colour outer sleeve) offollowing sizes as per EIL standard specification No. 6-51-0051, data sheet, specifications of this tender anddirections of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 930 100 M

1 C x 10 Sqmm (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 940 100 M

1 C x 25 Sqmm (Meter) _________________________________________________________________



Termination,connection of cables (Number) _________________________________________________________________

"Termination & connection of leads of 1100 V grade, multistranded Copper Conductor, XLPE/PVC insulated andunarmoured, cables of following sizes for earthing of equipment, includingsupply of lugs, supply and fixing ofGI saddles and saddle bars, cutting and stripping of cableinsulation, crimping the lug on to the conductor, clampingof the cable, including all labour and materials as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge"

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




960 16 NO 1C X 10 sq mm (Number)

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 970 10 NO

1 C x 25 Sqmm (Number) _________________________________________________________________



TELEPHONE SYSTEM (Number) _________________________________________________________________



S/I/T/C of Telephone JBs (Number) _________________________________________________________________

"Supply, installation, testing and commissioning of IndoorTelephone Distribution J.B. made out of 2.03 mm (14gauge) sheet steel, with one anti-rust coat of primer, withtwo finished coats of approved epoxy paint, with Kronetype terminals with hinged lockable door, detachablegland plate at the bottom/top complete with terminationand connections of incoming/ outgoing cables, includingall labour and materials, as per specifications of thistender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1000 1 NO

TDJB Surface mounting type, suitable for (Number) _________________________________________________________________

TDJB Surface mounting type, suitable for ( Incoming - 1 Nos, Incoming - 10Pair, Outgoing 1 Pair - 10 Nos. )




_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1010 1 NO

TDJB Flush mounting type with an additio (Number) _________________________________________________________________

"TDJB Flush mounting type with an additional cable pullbox at bottom for easy termination of cable suitable for ( Incoming- 1 Nos, Incoming - 20 Pair, Outgoing 1 Pair -20 Nos. )"

_________________________________________________________________



S/I/T/C of Plug in sockets for telephone (Number) _________________________________________________________________

"Supply, installation, connection, testing andcommissioning of following plug - in type sockets forTelephones extensions including supply of sheet boxeswith covers connection of socket and plug, including alllabour and materials, as per approved drawings,specifications of this tender and directions of Engineer-in-charge"

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1030 2 NO

Surface Mounting Type. (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1040 6 NO

Flush Mounting Type. (Number) _________________________________________________________________






Wiring with cu. conductor-twin wire (Meter) _________________________________________________________________

Wiring with (No. of wires given below) 660 V grade, 0.63 mm dia. annealedtinned copper conductor, PVC insulated twin flat wire as perrelevant IS in already laid surface/concealed conduit from TDJBonwards to telephone sockets including supply of Wires, termination andconnection, including all labour and materials, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1060 100 M

1 No. twin flat wire. (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1070 100 M

2 Nos. twin flat wires (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1080 50 M

3 Nos. twin flat wires (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1090 50 M

4 Nos. twin flat wires. (Meter) _________________________________________________________________






Supply of Communication/Fire Alarm cable (Meter) _________________________________________________________________

Supply of Communication / Fire Alarm cables of following sizes as per EILstandard specification No. 6-51-0052, data sheet, specifications of thistender and directions of Engineer-in-Charge.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1110 3,000 M

Non-Jelly filled cable. 1.5 sqmm, 2 Pair (Meter) _________________________________________________________________

Non-Jelly filled cables. ( 1.5 sqmm, 2 PAIR ) CABLE SHALL BE ARMOURED TYPE.OUTERSHEATH SHALL BE FRLS TYPE AND RED IN COLOUR

_________________________________________________________________



FIRE ALARM SYSTEM (Number) _________________________________________________________________



I/T/C of folllwing FA system eqpts. (Number) _________________________________________________________________

Installation, termination, connection, testing andcommissioning of following fire alarm panel including Power Packand battery backup system and all associated items, includingtransportation from store/yard to site at the place ofinstallation, assembling and installation on foundation or fixingto wall or steel structures, aligning, levelling, grouting,termination and connection of cables, making earth connections etc.,including all labour and materials, as per approved drawings,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________specifications of this tender and directions of Engineer-in-Charge.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1140 1 NO

Fire alarm panel. (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1150 2 NO

Heat detectors. (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1160 10 NO

Break glass type fire alarm boxes. (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1170 90 NO

Response Indicators. (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1180 15 NO

Exit signs. (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________




1190 8 NO Hooters. (Number)

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1200 160 NO

Multi sensor type detectors (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1210 10 NO

Fault Isolator modules (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1220 2 NO

Input/Monitoring relay module (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1230 2 NO

Output/Control Relay Module (Number) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1240 3 NO

Hooter Acknowledge Box (Number) _________________________________________________________________






Supply of WP FAJB -outdoor inst. (Number) _________________________________________________________________

Supply of weatherproof type fire alarm junction box(FAJB) suitable for outdoor installation with Krone/screwtype terminals, including supply of weatherproof doublecompression cable glands and weatherproof plugs toblock the unused entry including all labour and materials,as per specifications of this tender and direction ofEngineer-in-Charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1260 2 NO

FAJB- I/C-4/2p, O/G-2p-4 No. (Number) _________________________________________________________________

FAJB with ( Incoming - 4 Nos, Incoming - 2 Pair, Outgoing 2 Pair - 4 Nos. ) _________________________________________________________________



I/T/C of FAJB - outdoor inst. (Number) _________________________________________________________________

Installation, testing and commissioning of weatherprooftype fire alarm junction box (FAJB) suitable for outdoorinstallation with Krone/screw type terminals, includingtermination and connections of incoming and outgoingnon-jelly cable, excluding supply of weatherproof doublecompression cable glands, including all labour andmaterials, as per specifications of this tender anddirection of Engineer-in-Charge. _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1280 2 NO

FAJB- I/C-4/2p, O/G-2p-4 No. (Number) _________________________________________________________________

FAJB with(Incoming - 4 Nos, Incoming - 2 Pair, Outgoing 2 Pair - 4 Nos. ) _________________________________________________________________






LAYING OF COMMUNICATION / FIRE AL CABLES (Meter) _________________________________________________________________

LAYING OF COMMUNICATION / FIRE ALARM CABLES _________________________________________________________________



Horiz./Vert. Laying of Comm./FA cables (Meter) _________________________________________________________________

Horizontal and vertical laying/pulling through ofcommunication/fire alarm cables of the following overall diameters inready trays/trenches/conduits or supported on structures includingsupplying and fixing of GI saddle and saddle bars, stainlesssteel/aluminium strip number tags, including transportation from store/yardto site at the place of installation, unpacking, including all labourand materials, as per approved drawings, specifications of this tenderand directions of Engineer-in-Charge.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1310 4,500 M

Cables of overall dia. upto 35 mm. (Meter) _________________________________________________________________


______________________________________________________________________________________________________________________________________________Informatory item_______________________________________________________________________ 1320 M3

CIVIL WORKS/M.S. CHEQUERED PLATE (Cubic meter) _________________________________________________________________






Excavation and backfilling of trench (Cubic meter) _________________________________________________________________

Excavation and backfilling of trenches for cables and earth strip etc., for a maximum depth of 1.5 m, shoring, shuttering and dewatering(if necessary) including consolidation and disposal of surplusearth up to a distance of 30 m, including all labour andmaterials, as per approved drawings, specifications of this tender anddirections of Engineer-in-Charge. (Excavated trench dimensions shallbe measured).

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1340 10.000 M3

Excavation & backfilling of trench- soil (Cubic meter) _________________________________________________________________

Excavation and backfilling of trenches in all types of soil except rock. _________________________________________________________________



S/S of stand/stone dust in cable trench (Cubic meter) _________________________________________________________________

Supply and spreading of approved fine river sand/stone dust in cabletrenches, including all labour and materials, specifications of this tenderand directions of Engineer-in-Charge.

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1360 5.000 M3

Stone dust. (Cubic meter) _________________________________________________________________


______________________________________________________________________________________________________________________________________________Informatory item_______________________________________________________________________




1370 NO LAN Systems (Number)

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1380 8 NO

S/I/T/C of CAT-6 UTP Jack (Number) _________________________________________________________________

Supply, installation, termination, testing and commissioning of flush mountedCAT-6 UTP JACK (Information Outlets) including supply of all connectedmaterials(i.e Face plates, Surface mount box, patch cord at I/O end),including all labour and materials, as per approved drawings, Specificationsof this tender and directions of Engineer-in-charge.

_________________________________________________________________



Circuit wiring with cables for LAN (Meter) _________________________________________________________________

"Circuit wiring with following cables for LAN in already laidsurface/concealed conduit from Etherswitch rackonwards to Cat-6 UTP Jack (Information outlet) includingthe supply of cables, termination and connection at bothends (i.e at jack panel end & at the I/O end), including alllabour and materials, as per approved drawings,specifications of this tender and directions of Engineer-incharge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1400 100 M

1 no. CAT-6 UTP cable (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1410 100 M



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________2 nos. CAT-6 UTP cable (Meter)

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1420 100 M

3 nos. CAT-6 UTP cable (Meter) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1430 50 M



_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1440 50 M



______________________________________________________________________________________________________________________________________________Informatory item_______________________________________________________________________ 1450 LS

Miscellaneous - Fire Alarm System (Lumpsum) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1460 1,500 M

Supply of Fire alarm cable of 2P x 1.5CU (Meter) _________________________________________________________________

"Supply of Fire alarm cable of 2P x 1.5 sq. mm size CuConductor, Overall sheathed, Twisted pair, Unarmoured,Overall screened, non jelly filled cable with FRLS typePVC outersheath (Red colour outersheath) as per EILstandard specification 6-51-0052, data sheet including



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________supply of cable, all labour and materials complete as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1470 1 NO

Supply of 6 loop microprocessor FA Panel (Number) _________________________________________________________________

"Supply of 6 loop microprocessor based AnalogueAddressable type Data Gathering Fire Alarm Panel(DGFAP) having dedicated battery back-up and allassociates items such as Control Modules, MonitorModule for interfacing with Fire alarm devices in vendor'sscope including transportation from vendors work / shopto owner's store at site including supply of all mountinghardware, as per approved drawings, specifications of this tender anddirections of Engineer-in-Charge."

All the data including location of any device operation i.e. smoke detector,other all the addressable devices of this FA panel shall also replicate in GTUcontrol room DCS. Identification details of all the smoke detetcors of GTU SRRand GTU control room shall appear in DCS located in GTU control room strictlyonly through modbus connectivity. Any repeater panel in GTU control room isnot accepted.All the items including ProgrammingSoftware, Driver, License, USB Hardware Dongle,MODBUS Gateway, Network Communication Module,LAN Port, LAN card and all the other accesories forinterfacing with Fire alarm devices to DCS through modbus connectivity is invendor's scope _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1480 160 NO

Supply of multisensor Smoke detectors-Ad (Number) _________________________________________________________________

"Supply of Multisensor type addressable fire alarmdetectors with junction boxes & cable glands for AnalogueAddressable type fire alarm system, includingtransportation from vendors work / shop to owner's store



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________at site, including supply of all mounting hardware, as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1490 1 NO

Supply of Intr. safe Heat Detector (Number) _________________________________________________________________

"Supply of Rate of rise cum fixed temperature typeaddressable intrinsically safe fire alarm heat detectorswith junction boxes and cable glands (suitable for Zone 1,Gas Gr. IIC, Temp. Class T3) for Analogue Addressabletype fire alarm system, including transportation fromvendors work / shop to owner's store at site, includingsupply of all mounting hardware, as per approveddrawings, specifications of this tender and directions ofEngineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1500 90 NO

Supply of Response indicators f (Number) _________________________________________________________________

"Supply of Response indicators for Analogue Addressabletype fire alarm system, including transportation fromvendors work / shop to owner's store at site, includingsupply of all mounting hardware, as per approveddrawings, specifications of this tender and directions ofEngineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1510 10 NO

Supply of safe area MCPs (Number) _________________________________________________________________

"Supply of Safe area addressable outdoor type breakglass type fire alarm boxes (manual call points-MCP) for



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Analogue Addressable type fire alarm system, includingtransportation from vendors work / shop to owner's storeat site, including supply of all mounting hardware, cableglands as per approved drawings, specifications of thistender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1520 1 NO

Supply of FA Heat Detectors (Number) _________________________________________________________________

"Supply of Rate of rise cum Fixed Temperature typeaddressable Fire alarm Heat detectors with junctionboxes & cable glands for Analogue Addressable type fire alarm system,including transportation from vendors work/ shop to owner's store at site, including supply of allmounting hardware, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1530 8 NO

Supply of Addr. type Electronic hooter (Number) _________________________________________________________________

"Supply of Addressable type Electronic hooter withminimum 6W output suitable in indoor location forAnalogue Addressable type fire alarm system, includingtransportation from vendors work / shop to owner's storeat site, including supply of all mounting hardware, as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge"

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1540 3 NO

Supply of Hooter acknowledgement box (Number) _________________________________________________________________



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________"Supply of Hooter acknowledgement box suitable forindoor location for Analogue Addressable type fire alarmsystem, including transportation from vendors work / shopto owner's store at site, including supply of all mountinghardware, as per approved drawings, specifications ofthis tender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1550 14 NO

Supply of Wall mounting exit signs (Number) _________________________________________________________________

"Supply of Wall mounting type one faced exit signs(addressable type) suitable for indoor location forAnalogue Addressable type fire alarm system, includingtransportation from vendors work / shop to owner's storeat site, including supply of all mounting hardware, as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1560 1 NO

Supply of ceiling mounting exit signs (Number) _________________________________________________________________

"Supply of Ceiling mounting type double faced exit signs(addressable type) suitable for indoor location forAnalogue Addressable type fire alarm system includingtransportation from vendors work / shop to owner's storeat site, including supply of all mounting hardware, as perapproved drawings, specifications of this tender anddirections of Engineer-in-Charge"

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1570 10 NO

Supply of Fault isolator modules (Number) _________________________________________________________________



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________"Supply of Fault isolator modules for loops connecting break glass units /detectors for Analogue Addressabletype fire alarm system, including transportation fromvendors work / shop to owner's store at site, includingsupply of all mounting hardware, as per approveddrawings, specifications of this tender and directions ofEngineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1580 2 NO

Supply of Control Module (Number) _________________________________________________________________

"Supply of Control Module for Analogue Addressable typefire alarm system, including transportation from vendorswork / shop to owner's store at site, including supply of allmounting hardware, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1590 2 NO

Supply of Monitor Module (Number) _________________________________________________________________

"Supply of Monitor Module for Analogue Addressable typefire alarm system, including transportation from vendorswork / shop to owner's store at site, including supply of allmounting hardware, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1600 1 LOT

Supply of Mandatory Spares (Lot) _________________________________________________________________

"Supply of Mandatory Spares for Analogue Addressable



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________type fire alarm system including packing andtransportation from vendors work / shop to owner's storeat site as per approved drawings, specifications of thistender and directions of Engineer-in-Charge."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1610 1 LOT

Providing Training (Lot) _________________________________________________________________

"Providing Training to Owner's Engineers for the suppliedAnalogue Addressable type fire alarm system atmanufacturer's works and at site as per specifications ofthis tender."

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1620 1 SET

S/I/T/C of FA Modbus card & conn to DCS (set) _________________________________________________________________

Supply, Installation, testing and commissioning of modbus connectivity between6 Loop addrasable FA Panel (DGFAP) located in GTU SRR to DCS located in GTUControl room. All the data including location of any device operation i.e.smoke detector, other all the addressable shall replicate in GTU control roomDCS. Identification details of all the smoke detetcors of GTU SRR and GTUcontrol room shall appear in DCS located in GTU control room strictly onlythrough modbus connectivity. Any repeater panel in GTU control room is notaccepted.This is including transportation from vendors work / shop toowner's store at site including supply of all mountinghardware, as per approved drawings, specifications ofthis tender and directions of Engineer-in-Charge _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1630 1 SET

S/I/T/C of Software for FA system, tools (set) _________________________________________________________________

Supply, Installation, Testing and Commissioning of dedicated Laptop,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Programming Software, Driver, License, USB Hardware Dongle, MODBUS Gateway,Network Communication Module,LAN Port etc. for 6 Loop Addressable type Data Gathering Fire Alarm Panel(DGFAP) having dedicated battery back-upis in vendor's scope including transportation from vendors work / shop toowner's store at site including supply of all mountinghardware, as per approved drawings, specifications ofthis tender and directions of Engineer-in-Charge.

Vendor shall demonstrate the communication from this laptop through suppliedsoftware & programming tools, dongle etc. to BPCL engineer for uploading,downloading of programs for smoke detectors, other addresable equipment in theFA system of GTU SRR and GTU control room. _________________________________________________________________


______________________________________________________________________________________________________________________________________________Informatory item_______________________________________________________________________ 1640 LOT

ANNUAL MAINT CONTRACT -FA system (Lot) _________________________________________________________________

Comprehensive Annual Maintenance Contract (AMC) forAddressable Fire Alarm System (under contractor'sscope as included in this SOR) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1650 1 LOT

AMC for FA system-1st Year (Lot) _________________________________________________________________

Comprehensive Annual Maintenance Contract (AMC) forAddressable Fire Alarm System (under contractor'sscope as included in this SOR) for 1st Year _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1660 1 LOT

AMC for FA system-2nd Year (Lot) _________________________________________________________________

Comprehensive Annual Maintenance Contract (AMC) forAddressable Fire Alarm System (under contractor'sscope as included in this SOR) for 2nd Year _________________________________________________________________






MECHANICAL EQUIPMENT (Lumpsum) _________________________________________________________________



Miscellaneous - S/I/T/C of HVAC (Lumpsum) _________________________________________________________________

Air-conditioning System for GTU - SRR Building

_________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1690 1 LOT

Air-conditioning System-HVAC for GTU SRR (Lot) _________________________________________________________________

Air-conditioning System for GTU - SRR Building

Design, engineering, manufacture, procurement of rawmaterials and bought out components, fabrication,assembly at shop, inspection, testing at manufacturer'swork, shop painting, packing and delivery including supplyof all commissioning spares, special tools and tackles asapplicable, mandatory spares, first fill of refrigerants forair-conditioning system and lubricants, transportationfrom vendor's work to site, unloading at site, handling,transportation to contractor's store and from contractor'sstore to work site, storage at site, assembly at site.Installation of HVAC equipment including supply air andreturn air ducting, cooling tower, hook up, testing, painting,insulation,commissioning, performance guarantee run at site,handing over to client and other field works including civilstructural works complete in all respect as per theenclosed Scope of Supply and Work (Doc no.A918-160-80-43-SW-8201)Description of Water Cooled Package Air Conditioning



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________system including cooling tower:Total Cooling Load : 28 TR ( Required minimum coolingload)No. of AC units: 3 Nos. ( 2 W + 1S)For detailed scope, refer Job Specification of S&ME-2(Doc. A918-160-80-43-SP-8201) _________________________________________________________________


_____________________________________________________________________________________________________________________________________________________________________________________________________________________ 1700 1 LS

Supply and Installation of Misc items (Lumpsum) _________________________________________________________________

Supply and installation of following items in GTU SRR and control room.

3 No. Spike guards2 No. LOTO box1 no. Fuse box1 No. Steel Cupboard1 no. Office table & chair set1 no. fly killer machine1 No. Hand dryer1 No. Electric Geyser (With digital display)2 No. Heavy duty (Capacity 30 L) Vacuum cleaners2 No. Heavy duty aluminium step ladder (Max - 2 feet Height)

_________________________________________________________________


_______________________________________________________________________Service Tax%____________ VAT%________________ CST%________________

_____________________________________________________________________________________________________________________________________________________________________________________________________________________* 01 Scope of Work & Special Conditions of Co

Civil, Architectural & ELectrical Works for GTU SRR Building:

1) INTRODUCTION :

BPCL Mumbai Refinery envisages following works under the scope of thiscontract as a part of GTU Project activities.

-Civil, Architectural and electrical works including associated works for GTUSRR Building with RCC Blast proof construction.-other associated civil works related GTU Project inside refinery premises



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________Contractor should apprise himself of all the conditions prevailing in thislocation and the restrictions placed on movement of personnel and equipment inthe area, types of equipment and tools permitted, working method allowed etc.in the light of security and safety regulations operative in the area.

M/s Engineers India Ltd. (EIL) is Project Management Consultant (PMC) for GTUProject & RCM, EIL shall be the Engineer-In-Charge (EIC) for this contract.

2) SCOPE OF WORK :

Work of "GTU SRR Building" will be broadly consisting of followings

1. Civil works2. Architectural works3. Electrical Works4. Air conditioning work5. Fire Alarm system work

The scope of work includes following activities as per instructions ofEngineer-in- Charge ( EIC) & SOR but not limited to the same:

2.1 Providing and laying PCC / RCC for foundations, pavements, drains, cabletrenches, box culvert etc. including providing and fixing reinforcement /shuttering.2.2 Providing and laying Brick / Random Rubble Masonry works/ Pitchingincluding plastering for walls, steps, cross overs, drains, cable trenches,chambers etc.2.3 Dismantling of RCC, PCC, Asphalted road, Brick/RR Masonry Works, Brick/RRPitching and dismantling of structure.2.4 Supplying and laying of Hume pipes2.5 Restoration of area after completion of work.2.6 Painting on str., RCC and cement plaster surface.2.7 Interior works like false ceiling , false flooring , MS metal inserts,Flooring2.8 Electrical work2.9 RCC Cable trenches work2.10 Air conditioning work2.11 Water proofing of Roof slab2.12 Any other works as per SOR & scope of work as directed byEngineer-in-charge.2.13 Fire Alarm system work and Lighting work

3.0 SPECIAL CONDITIONS OF CONTRACT :

Please note that "Scope of Work" will be read along with the 'SpecialConditions' of this contract. Contractor shall be required to abide by theconditions stated in General terms & conditions attached.




3.1. Prior to quote for the job, the bidder will be required to visit the site& clarify all the doubts (if any) from BPCL/EIL . Otherwise it will bepresumed that the party has understood the work in all respect.

4. FIRE & SAFETY REGULATIONS

The work shall be carried out in a safe manner as per Refinery Fire & SafetyRules & Regulations. Work permit condition shall be scrupulously followed.

BPCL conducts an intensive training program on various aspects of Fire &Safety, on regular basis, at Refinery-Sports Club. It is the responsibility ofthe Contractor to nominate all the supervisors/labours (likely to be employedfor this job) for training through BPCL site engineer. The successfulcompletion of training is mandatory requirement (in addition to otherqualifications/experiences mentioned earlier) for any supervisor/labour to beeligible for working at Refinery work site. Failing which no supervisor/labourwill be deputed for working at Refinery work site. Contractor shall also sendall the other workmen deployed at Refinery for this training.

Contractor shall arrange all required safety gadgets like safety helmet,safety Belt, safety shoes, Boiler suit, Gloves, Goggles, Fire hoses, FireExtinguishers, etc. for their workmen and to execute the job as per permitconditions.

All Equipment and tools to be used at site shall accompany valid TestCertificates. For Cranes contractor shall arrange the Third party inspectionincluding load test at site before starting the activities without any extracost to BPCL. Contractor shall maintain a record of all equipments and toolsbeing used at site with their identifications numbers and test certificates ina separate file.

Contractor shall arrange for temporary lighting inside the plot area whereverrequired without any extra cost to BPCL. If flameproof light fittings arerequired to be used as per work permit conditions the same shall be providedby BPCL on returnable basis. Contractor shall arrange all other necessarymaterials such as cables, ELCBs, etc. and carry out all necessary works as perrequirement without any extra cost. Scaffolding will be as per BPCL standards.As far as practicable the danger zone around the work area should beadequately fenced off and sign painted.

5. MOBILIZATION FOR WORK.

Within 7 days of issue of contract letter the contractor shall mobilize allnecessary manpower & equipment & start the job at site as directed.

6. SCOPE OF SUPPLY :




6.1 BY BPCL (free issue) : NIL

6.2 BY BPCL (Chargeable) : NIL

6.3 BY CONTRACTOR :

6.3a Construction Materials : Reinforcement steel, Structural Steel, paint ,MSmetal inserts, anchor bolts, hume pipes, GI pipe sleeves & any other materialsto complete the work in all respect as per scope of work & as specified inSOR.

All equipment like crane , trailer, truck , DG set & any other equipment tocomplete the work in all respect as per scope of work.

Transportation of all type of materials required for the job in & outsiderefinery is in contractor's scope.

All construction works and material brought by the contractor shall be as perthe relevant latest IS specifications. The Engineer-in-charge/Inspectiondepartment shall have full authority to inspect the works at any time wheneverin progress either on the site or at contractors workshop wherever situated.All the test for e.g. Cube test, test for silt content of sand (as per IS 383,for Zone II & Zone III, as approved by Engineer- in-charge), etc. necessary inconnection with the execution of the works or material or workmanship suppliedby the contractor shall be carried out promptly by the contractor at his owncost from any other approved testing laboratory or at site as per theinstructions of the Engineer-in-charge/ Inspection department/ InspectionAgency appointed by BPCL/EIL.

CEMENT :

Cement required for all construction shall be provided by contractor only.Cement used for ready mix concrete shall be Portland Slag Cement (PSC)conforming to IS 455 or Portland Pozzolana Cement (PPC) Fly Ash basedconforming to IS 1489 Part-I as indicated in IS 456:2000. This shall be ofapproved make viz ACC, L&T,CCI, Gujarat Ambuja or equivalent conforming toIS:455 or IS: 1489 part-I.

Cement used for all other purposes except for Ready Mix Concrete shall beconforming to IS: 12269. This shall be of approved make viz. ACC, L&T,CCI,Gujrat Ambuja or equivalent make Ordinary Portland Cement grade 53 (conformingto IS:12269).

CRANE :

Crane , JCB , Poclain, dumper ,etc if required shall be arranged by contractor



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________at their cost. The contractor shall produce validity certificate issued by RTOas well as test certificate for load carrying capacity issued by the competentauthority in Form No. 12.

All the Consumables & Equipment including safety gadgets such as fireextinguishers, fire hoses to complete the work as per scope of work & asspecified in SOR.

TOOLS AND TACKLES :

All lifting tools like chain block, sling etc. required to be used at siteshall be tested by the statutory authority & have valid certificate for use.The copy of certificate shall be made available for verification as and whenrequired by BPCL .

SCAFFOLDING:

All scaffolding material along with fittings which is intended to be used forthe job is to be of steel only and shall be in the contractor's scope ofsupply

7. TECHNICAL PERSON AT SITE/DEPLOYMENT OF ENGINEER

The contractor shall depute experienced/qualified (Degree/diploma Holder)Civil/structure Engineers & Electrical engineer with safety trainedsupervisors for site job. Contractor shall sufficient manpower during agreedworking period to ensure effective output to meet the agreed schedule/ barchart.

8. WORK TIMINGS :

Normal working hours for carrying out this job will be morning 07.45 am toevening 03.45pm. Contractor may have to work in extended hours and on holidaysif required to meet the project schedule as instructed by Engineer-in-chargeafter taking all necessary permissions from BPCL.

For execution of this job, contractor shall be required to get clearances fromBPCL.The work shall be carried out in a safe manner as per Refinery norms & workpermit condition shall be scrupulously followed. The work should be plannedand undertaken only under the Supervision of a competent person.No idle time wages or compensation for temporary stoppages of work orrestrictions would be paid and the rate quoted for various items of workshould cover the cost of all such contingencies and eventualities. Substantialstructures and utilities exist both above ground and underground, adjacent tothe work site, Special care is necessary in transportation, storage, workingon equipments and other construction activities to protect the existing



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________features and prevent damage to any facility. Necessary protective structures,barricades etc. have to be erected at various places as directed by Engineerin charge. No extra payment of such protective work will be made. All roadsand open areas adjacent to the work site shall either be closed or suitablyprotected as per the job requirement.

9 HOUSE KEEPING :

The contractor shall maintain good housekeeping on day to day basis at thesite/storage yard. All materials brought by the contractor, cables, steelscrap (like structural steel, reinforcement steel etc.) & other debris (likeconcrete, earth, shrubs, rubbish etc.) generated at site shall be stackedneatly in well defined spaces at no extra cost. Minimum 5 people shall bedaily deployed by the contractor only for housekeeping works inside the plotarea which will execute the work as directed by contractor's safetysupervisor. Additional manpower as & when required for housekeeping shall bearranged by contractor immediately as per directions of BPCL. Record of themanpower deployed for housekeeping shall be maintained by the contractor.Penalty of Rs. 600 per day per person may be imposed on contractor if thehousekeeping manpower is less than the minimum requirement specified above.Contractor shall consider the same while quoting for the job as no extrapayment shall be made for deployment of manpower related to housekeepingworks.Cart away all the debris generated from the work outside the Refinery anddispose it off. Certified copy of gate passes shall be attached with the finalbill. Metal scrap or any other scrap including wooden material shall bedisposed category wise as indicated by the Engineer in Charge. The weighmentslip issued by the warehouse will be attached with the final bill.

All moveable, salvageable, serviceable material shall be dismantled carefullyand transported/ stored as directed by Engineer in charge.

The final bill of the contractor shall be linked with the area cleaning in allrespects including disposal of debris/scrap etc. to the entire satisfaction ofEngineer in charge.

- Disposal of unserviceable material outside refinery as instructed by BPCLkeeping BPCL indemnified from any complaint from Local authorties/ municipalbodies.

10. MEASUREMENT OF WORKS FOR PAYMENT: -

10.1 Measurements of works shall be as per respective item description orIS:1200 if nothing is mentioned in the schedule of rates/quantities.

10.2 The quantities indicated in the SOR/SOQ are indicative & payment shall bebased on actual/jointly certified measurements for the work done as per



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________SOR/Scope of work.

11 BILLING :

11.1 Contractor shall be paid against R.A. bills for the work done on thebasis of item rates as agreed in the contract.

11.2 Contractor's bill for executed works shall be accepted only when jointlycertified (contractor & EIC) & signed measurements for the said works areenclosed.

11.3 Final bill shall be submitted along with jointly certified & signedmeasurements within 2 months from the date of completion of total work.

12.0 ORDER OF PRECENDENCE:

In case of discrepency in the SOR and tender document attached herewith thistender the SOR descreptions followed by special conditions mentioned hereinwill supercede above the tender docuemnt. Any ambuguity in technicalspecifications shall be brought to the notice of BPCL before quoting for thejob.

Afer award of the job, For ambuiguity in technical specifications stringenttechnical conditions will supercede and decision of engineer in charge will befinal.

13.0 COMPLETION PERIOD :

The overall contractual completion period shall be 11 months from the date ofLOA or Purchase Order, whichever is earlier.

However, in order to give progressive work front to other agencies, thecompletion of following two intermediate milestones shall be achieved:

PART A: All the RCC work and interior work for the subject building (extensionof existing building) including Electrical/ AC system / GI supports for panelsshall be completed in 07 months to give front to other agencies.

PART B: Balance work including exterior work, exterior painting, waterproofing work, outside area development etc. shall be completed withinoverall completion period.

14.0 Liquidated Damages (LD) Clause:

The liquidated damages shall be applicable as per Following:

In case the completion is not achieved within scheduled completion period,



Item Material Qty Unit Unit Basic Rate Description Delivery date (in Figures)_______________________________________________________________________0.5% per week of delay or part thereof up to a maximum 5% of the totalcontract value shall be recovered as LD.

15.0 Payment Terms:

For all items: As per the agreed item rates for completed & certifiedquantities of work for respective item against RA bills.

10% from each RA bill shall be retained as retention till completion ofdefects liability period of twelve months. In lieu of retention money,contractor shall submit bank guarantee of 10% of contract value along withacknowledgement of purchase order valid for defects liability period of twelvemonths from the date of successful completion of contract, with validity ofsix months extra.

16.0. Minimum two numbers of portable H2S detectors per work location shall beensured by contractors while working in refinery plant areas. The portable H2Sgas detectors should be with valid calibration certificate. The portable H2Sgas detectors should be from reputed make such as Honeywell, Drager, MSA.

Existing penalty for "Violation of permit conditions" as per Sr No 3 ofexisting "financial deterrents" shall be applicable for the non-compliancewith respect to the point no 1. ________________________________________________________________________________________________________________________________________

* 02 General Conditions of Contract_______________________________________________________________________* 03 Special Safety Conditions_______________________________________________________________________* 04 General Terms & Conditions_______________________________________________________________________* 05 Financial Deterrent: HSE Policy_______________________________________________________________________* 06 Integrity Pact_______________________________________________________________________* 07 QEHSS Policy_______________________________________________________________________* 08 Energy Policy_______________________________________________________________________* 09 Hydra Ban_______________________________________________________________________* 10 A918 Tender Documents_______________________________________________________________________ Grand Total (inclusive of all taxes, duties/charges etc) In figure: In Words :

_______________________________________________________________________



TERMS & CONDITIONS_______________________________________________________________________ Important Notice_______________________________________________________________________ Sr.No Description_______________________________________________________________________ 001 Quotation received after due date will not be entertained

002 Your quotation must specify exact amount or percentage discount, Excise, S.T., Charges, Transport, Packing & forwarding, Octroi, etc. as applicable.

003 In case you are unable to quote, kindly send the quotation with a regret for our records. Non-receipt of a regret will adversely affect your vendor rating.

004 No quotation will be accepted without your rubber stamp and signature.

005 Your quotation must be strictly in enclosed envelope indicating Collective RFQ No., RFQ No. and due date.

006 For all future correspondences please mention the vendor code Collective RFQ Number & RFQ Number.

007 Retention Money 10 % shall stand deducted from each and every running bill submitted in the event of contract is awarded.

LIST OF ENCLOSURES1. Scope of Work & Special Conditions of Co2. General Conditions of Contract3. Special Safety Conditions4. General Terms & Conditions5. Financial Deterrent: HSE Policy6. Integrity Pact7. QEHSS Policy8. Energy Policy9. Hydra Ban10. A918 Tender Documents



-------Tear off Portion to be pasted on the envelope containing offer------------_______________________________________________________________________

Collective RFQ No. : 1000279201

Our Reference: Due Date : 28.04.2017RFQ No. : 6001043675 Due Time : 12:00:00Subject:

To,

Purchase Group : N28-GTU SER PROC_______________________________________________________________________

