OVERVIEWS OF INDEPENDENT STUDY:

SYNTHESIS OF ZnO-TiO2 CORESHELL NANOSTRUCTURES BY HYDROTHERMAL METHOD

HA NOI UNIVERSITY OF SCIENCE AND TECHNOLOGY**** ADVANCED TRAINING PROGRAM ****

Name : Hoàng Văn Ti n ếClass : MSE-K54ID Student : 20092697Instructor : Dr. Nguy n Duy Hùng-AISTễ

OUTLINE :

• Why i choose this topic?

• ZnO-TiO2 overviews

• Hydrothermal methods

• Process of researching

• Analysis method

• Results and discussions

• Summary

WHY I CHOOSE THIS TOPIC ?

- Buried contact solar cell

• Cadmium telluride solar cell

• Copper indium gallium selenide solar cells

• Dye-sensitized solar cell

• Gallium arsenide germanium solar cell

• Hybrid solar cell

• - Organic solar cell

- Nanocrystal solar cell- Plasmonic solar cell- Plastic solar cell- Polycrystalline solar cell- Polymer solar cell- Quantum dot solar cell- Solid-state solar cell- Thin film solar cell- Monocrystalline solar cell- Multijunction solar cell- ……………………….

Types of solar cell :

WHY I CHOOSE THIS TOPIC ?

• Harmful organic compounds in the ecological unit are the main concern for the scientific society, which is causative agent of water pollution and severe contamination of the environment. Waste-water containing organic dyes (organicpollutants) inhibit sunlight penetration which suppressesphotosynthetic reaction.

• Metal oxide semi-conducting nano materials have been proven to be very efficient photocatalysts for the degradation of organic dye pollutants with the help of solar light. In particular, TiO2 and ZnO are the most versatile semiconductor oxides with applications across a wide range from cosmetics to air purification.

• However, the poor consumption of solar energy and the short diffusion length of photogenerated exciton are the two key factors restrictive to further improvement of photocatalytic efficiency

• develop new and efficient sunlight-sensitive photocatalysts.

FTO :Fluorine doped Tin Oxide

Rutile-tetragonal Brookite-orthorhombic Anatise-tetragonal

TiO2 (rutile )Lattice Constants, Е a = 4.593

c = 2.958

Density, g/cm3 4.24 - 4.28

Thermal Expansion Coefficient, 10-6 K-1 a|| = 9.19a^ = 7.14

HYDROTHERMAL METHODS

• The term “hydrothermal” usually refers to any heterogeneous reaction in the presence of aqueous solvents or mineralizers under high pressure and temperature conditions to dissolve and recrystallize materials that are relatively insoluble under ordinary conditions.

• Uses : A large number of compounds belonging to practically all classes have been synthesized under hydrothermal conditions: elements, simple and complex oxides , tungstates , molybdates , carbonates, silicates , germanates etc. Hydrothermal synthesis is commonly used to grow synthetic quartz , gems and other single crystals with commercial value.

EXPERIMENTALPROCEDURE

• Growth of ZnO nanorods array

• Deposition of TiO2 shells on ZnO nanorods

• Materials characterization

• X‐ray diffraction (XRD) used to phase characterization and crystalline size,

• Scanning electron microscopy (SEM) to morphology and microstructure investigations.

• Diffusive UV‐visible‐NIR spectrometry to band gap calculations

• Solar cell fabrication and testing

GROWTH OF ZNO NANORODS ARRAY