in-building wireless solutions - tinex group...

In-Building Wireless SolutionsINDOOR

Passive Distributed Antenna Systems

2 I Passive DAS I Content

Content

Passive DAS Introduction 4

Antennas 12

80010748 1-Port Omni Antenna 876–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, N Connector 1378711019 1-Port Omni Antenna 698–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, N Connector 1478712019 1-Port Omni Antenna 698–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, 4.3-10 Connector 1478711029 1-Port Omni Antenna 698–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, N Connector 1580010249 1-Port Omni Antenna 790–960 (SISO), 1425–3800 (SISO), 5150–6000 (SISO), Vertical Polarisation,

N Connector 1680020249 1-Port Omni Antenna 790–960 (SISO), 1425–3800 (SISO), 5150–6000 (SISO), Vertical Polarisation,

4.3-10 Connector 1678712031 1-Port Omni Antenna 698–960 (SISO), 1690–4000 (SISO), Vertical Polarisation, 4.3-10 Connector 1778712033 1-Port Card Omni Antenna 698–960 (SISO), 1690–2700 (SISO), 3400–4000 (SISO), Horizontal Polarisation,

4.3-10 Connector 1878712035 1-Port Slim Omni Antenna 698–960 (SISO),1690–2700 (SISO), 3400–4000 (SISO), Horizontal Polarisation,

4.3-10 Connector 1978712041 1-Port Omni Antenna 380–6000 (SISO), Vertical Polarisation, 4.3-10 Connector 2080010710 2-Port Omni Antenna 790–960 (SISO), 1710–2700 (MIMO), Dual Polarisation, N Connector 2180020710 2-Port Omni Antenna 790–960 (SISO), 1710–2700 (MIMO), Dual Polarisation, 4.3-10 Connector 2178711014 2-Port Omni Antenna 698–960 (SISO), 1710–2700 (MIMO), Dual Polarisation, N Connector 2278712014 2-Port Omni Antenna 698–960 (SISO), 1710–2700 (MIMO), Dual Polarisation, 4.3-10 Connector 2278510802V02 2-Port Omni Antenna 694–960 (SISO), 1710–2690 (MIMO), Dual Polarisation, N Connector 2378510802V03 2-Port Omni Antenna 694–960 (SISO), 1710–2690 (MIMO), Dual Polarisation, 4.3-10 Connector 2378711020 2-Port Omni Antenna 698–960 (MIMO), 1710–2700 (MIMO), Dual-Vertical Polarisation, N Connector 2478712020 2-Port Omni Antenna 698–960 (MIMO), 1710–2700 (MIMO), Dual-Vertical Polarisation, 4.3-10 Connector 2478711030 2-Port Omni Antenna 698–960 (MIMO), 1710–4000 (MIMO), Dual-Vertical Polarisation, N Connector 2578712030 2-Port Omni Antenna 698–960 (MIMO), 1710–4000 (MIMO), Dual-Vertical Polarisation, 4.3-10 Connector 2580010712 2-Port Omni Antenna 694–5920 (MIMO), Dual-Vertical Polarisation, 4.3-10 Connector 2680010465 1-Port Directional Antenna 790–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, N Connector 2778711313 1-Port Directional Antenna 698–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, N Connector 2878712313 1-Port Directional Antenna 698–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, 4.3-10 Connector 2880010677 2-Port Directional Antenna 790–960 (SISO), 1710–2700 (SISO), Vertical/Dual Polarisation, N Connector 2980010882 2-Port Directional Antenna 694–960 (MIMO), 1710–2690 (MIMO), Dual Polarisation, 4.3-10 Connector 3078510801V02 2-Port Directional Antenna 694–960 (MIMO), 1710–2690 (MIMO), Dual Polarisation, N Connector 3178510801V03 2-Port Directional Antenna 694–960 (MIMO), 1710–2690 (MIMO), Dual Polarisation, 4.3-10 Connector 3178711311 2-Port Directional Antenna 698–960 (MIMO), 1710–2700 (MIMO), Dual Polarisation, N Connector 3278712311 2-Port Directional Antenna 698–960 (MIMO), 1710–2700 (MIMO), Dual Polarisation, 4.3-10 Connector 3278712330 2-Port Directional Antenna 698–960 (MIMO), 1710–4000 (MIMO), Dual Polarisation, 4.3-10 Connector 33

I 3Passive DAS I Content

Electrical Accessories 34

78761022 2-way Power Splitter 698–2700 MHz, 300 W, N Connector 3578761032 3-way Power Splitter 698–2700 MHz, 300 W, N Connector 3578761042 4-way Power Splitter 698–2700 MHz, 300 W, N Connector 3578762023 2-way Power Splitter 698–3800 MHz, 500 W, 4.3-10 Connector 3678762033 3-way Power Splitter 698–3800 MHz, 500 W, 4.3-10 Connector 3678762043 4-way Power Splitter 698–3800 MHz, 500 W, 4.3-10 Connector 3686010017 2-way Power Splitter 694–2700 MHz, 1000 W, N Connector 3786010018 3-way Power Splitter 694–2700 MHz, 1000 W, N Connector 3786010019 4-way Power Splitter 694–2700 MHz, 1000 W, N Connector 3786020017 2-way Power Splitter 694–3800 MHz, 100 W, 4.3-10 Connector 3886020018 3-way Power Splitter 694–3800 MHz, 100 W, 4.3-10 Connector 3886020019 4-way Power Splitter 694–3800 MHz, 100 W, 4.3-10 Connector 3878761105 Directional Couplers 698–2700 MHz, 5 dB Coupling Loss, N Connector 3978761106 Directional Couplers 698–2700 MHz, 6 dB Coupling Loss, N Connector 3978761108 Directional Couplers 698–2700 MHz, 8 dB Coupling Loss, N Connector 3978761110 Directional Couplers 698–2700 MHz, 10 dB Coupling Loss, N Connector 3978761113 Directional Couplers 698–2700 MHz, 13 dB Coupling Loss, N Connector 3978761115 Directional Couplers 698–2700 MHz, 15 dB Coupling Loss, N Connector 3978762105 Directional Couplers 698–3800 MHz, 5 dB Coupling Loss, 4.3-10 Connector 4078762106 Directional Couplers 698–3800 MHz, 6 dB Coupling Loss, 4.3-10 Connector 4078762108 Directional Couplers 698–3800 MHz, 8 dB Coupling Loss, 4.3-10 Connector 4078762110 Directional Couplers 698–3800 MHz, 10 dB Coupling Loss, 4.3-10 Connector 4078762113 Directional Couplers 698–3800 MHz, 13 dB Coupling Loss, 4.3-10 Connector 4078762115 Directional Couplers 698–3800 MHz, 15 dB Coupling Loss, 4.3-10 Connector 4086010136 Power Tapper 694–2700 MHz, 7.0 /1.0 dB, N Connector 4186010137 Power Tapper 694–2700 MHz, 10.4/0.4 dB, N Connector 4186010138 Power Tapper 694–2700 MHz, 15.1/0.1 dB, N Connector 4186020136 Power Tapper 694–2700 MHz, 7.0 /1.0 dB, 4.3-10 Connector 4286020137 Power Tapper 694–2700 MHz, 10.4/0.4 dB, 4.3-10 Connector 4286020138 Power Tapper 694–2700 MHz, 15.1/0.1 dB, 4.3-10 Connector 4286010160 Power Tapper 380–960/1695–2700/3400–3800/4920–5920 MHz, Continuously Adjustable

Splitting Ratio, N Connector 4386020160 Power Tapper 380–960/1695–2700/3400–3800/4920–5920 MHz, Continuously Adjustable

Splitting Ratio, 4.3-10 Connector 43

Passive DAS Introduction

4 I Kathrein I Company Portrait

Who we are and what we stand for

Kathrein is a leading international specialist for

reliable, high-quality communication technologies.

We are an innovation and technology leader in today's

connected world. Our ability to provide solutions and

systems enables people all over the world to communicate,

access information and use media, whether at home, at

the office or on the road. We cover a broad spectrum:

from outdoor and indoor mobile communication solutions,

to satellite reception, broadband and broadcast technology,

to transmission and reception systems in vehicles.

As a hidden champion and family-owned enterprise, we

have been working on the technologies of tomorrow since

1919. We take pride in our dedicated employees and our

passion for customers and quality.

Our Solutions

Find out more about us at www.kathrein.com

MOBILE COMMUNICATION INDOOR SAT BROADBAND BROADCAST AUTOMOTIVE

Passive DAS I Introduction I 5

With increasing data traffic and the need for mobile access any

time and anywhere, additional availability of mobile networks in

indoor environments is indispensable. The network coverage

supplied by macro sites is not sufficient to overcome the high

penetration losses due to the used façade material of most

buildings resulting in poor indoor coverage. To overcome this,

distributed antenna systems (DAS) are numerously installed in

typical indoor venues like shopping malls, hotels, transportation,

hospitals etc.

Today, everyone is talking about active DAS, allowing flexible ca-

pacity adaption and easy network modification. Depending on

the size of the venue and the specific application, it is still often

a more cost effective solution to use a passive DAS. Although

passive DAS are relatively unflexible to retroactive changes in

the system setup, the clear advantages are the simple design,

low material costs, low maintenance efforts, high reliability and

easy coverage deployment. Hence in venues without significant

change in requirements over time the use of a passive DAS may

often be reasonable.

According to an ABI research study from January 2016, the size

of the in-building wireless market is predicted to more than dou-

ble in revenue by 2020. These numbers reflect the importance

of in-building systems in the future and show the indispensability

of indoor DAS installations.

With more than 3 million sold indoor products and more than

20 years of experience in passive indoor systems, Kathrein is a

trustable partner for future investments in the indoor sector. Not

only do we supply high quality products for DAS but we also

provide complete installation and planning services.

Passive Distributed Antenna Systems

4 I Kathrein I Company Portrait

Who we are and what we stand for

Kathrein is a leading international specialist for

reliable, high-quality communication technologies.

We are an innovation and technology leader in today's

connected world. Our ability to provide solutions and

systems enables people all over the world to communicate,

access information and use media, whether at home, at

the office or on the road. We cover a broad spectrum:

from outdoor and indoor mobile communication solutions,

to satellite reception, broadband and broadcast technology,

to transmission and reception systems in vehicles.

As a hidden champion and family-owned enterprise, we

have been working on the technologies of tomorrow since

1919. We take pride in our dedicated employees and our

passion for customers and quality.

Our Solutions

Find out more about us at www.kathrein.com

MOBILE COMMUNICATION INDOOR SAT BROADBAND BROADCAST AUTOMOTIVE

6 I

Functional Layers of a Passive DAS

Passive DAS I Technical Description

In a passive DAS, all components which

are used for the distribution of the source

signals throughout the indoor location are

passive devices. A passive indoor system

consists of 4 main levels:

1. Signal source

The signal supply for the indoor

system can be fed into the building in

different ways:

a. Donor antenna + repeater

b. Standard base station (BTS)

c. Baseband unit (BBU) plus Remote

Radio Head (RRH)

2. Combiner (Point of Interface, POI)

The different source signals and diffe-

rent frequencies are interconnected to

a common interface

3. Signal distribution

Electrical accessories like splitters

and tappers are used to achieve the

correct signal level on the different

antennas

4. Indoor antennas

Multi-band antennas are used for the

distribution of the signal in the building

Structure of a passive DASStructure of a passive DAS

Passive DAS I Technical Description | 7

In indoor applications, the antennas are the only elements in

the whole systems which are in most cases visible. Thus, it

is essential that the visual impact is kept to a minimum. The

unobtrusive broadband design of Kathrein indoor antennas

makes them highly versatile for a wide range of applications:

Frequency ranges of 380 – 6000 MHz

Ceiling or wall mounting

Omnidirectional or directional

MIMO capability

The choice of antennas is normally performed depending

on the coverage and installation requirements for the building.

Clear trends can be observed towards complete integration of

Indoor Antennas

the antennas into intermediate floors and suspended ceilings

as well as towards partial integration of the antennas, e.g.

in the ceiling. One example of a partially integrated Kathrein

indoor antenna is shown in the picture above.

If the system shall support MIMO, it is recommendable to

use special MIMO antennas with 2 polarisations instead of

using 2 single antennas which would need to be separated

in space and provoke a higher visual impact. During the

planning phase, it is important to include potentially needed

MIMO setups beforehand in order to provide the correct

cabling – for MIMO, double cabling may be needed.

6 I

Functional Layers of a Passive DAS

Passive DAS I Technical Description

In a passive DAS, all components which

are used for the distribution of the source

signals throughout the indoor location are

passive devices. A passive indoor system

consists of 4 main levels:

1. Signal source

The signal supply for the indoor

system can be fed into the building in

different ways:

a. Donor antenna + repeater

b. Standard base station (BTS)

c. Baseband unit (BBU) plus Remote

Radio Head (RRH)

2. Combiner (Point of Interface, POI)

The different source signals and diffe-

rent frequencies are interconnected to

a common interface

3. Signal distribution

Electrical accessories like splitters

and tappers are used to achieve the

correct signal level on the different

antennas

4. Indoor antennas

Multi-band antennas are used for the

distribution of the signal in the building

Structure of a passive DAS

Signal Distribution

Example of different power distributions for splitters and tappers

8 | Passive DAS I Technical Description

In order to distribute the sum of signals to the different floors/

spots, the correct split of the signals is essential. The signals

may need to be split up equally or unequally to achieve the cor-

rect signal level at the antenna.

Splitters provide the possibility to equally split up the input signal:

2, 3 or 4 output ports

694 – 3800 MHz

Tappers can split up the input signal with unequal distribution

at the output ports:

2 output ports

Different splitting ratios

Adjustable versions available

380 – 5920 MHz

Splitters

Tappers

The choice of the correct device depends on the architecture of the building and the needed signal distribution. An example of

the RF power split with Kathrein electrical accessories is given on page 7.

Signal Distribution

Example of different power distributions for splitters and tappers

8 | Passive DAS I Technical Description

In order to distribute the sum of signals to the different floors/

spots, the correct split of the signals is essential. The signals

may need to be split up equally or unequally to achieve the cor-

rect signal level at the antenna.

Splitters provide the possibility to equally split up the input signal:

2, 3 or 4 output ports

694 – 3800 MHz

Tappers can split up the input signal with unequal distribution

at the output ports:

2 output ports

Different splitting ratios

Adjustable versions available

380 – 5920 MHz

Splitters

Tappers

The choice of the correct device depends on the architecture of the building and the needed signal distribution. An example of

the RF power split with Kathrein electrical accessories is given on page 7.

Signal Distribution in a Passive DAS

In order to achieve a similar RF power distribu-

tion on each floor of a 4-storied building, different

splitter and tapper versions can be deployed. By

choosing different devices, the power levels can

be adapted accordingly.

The below picture shows the calculation for this

scenario. The splitters and tappers split up the

power with the ratios indicated in the chapter

“Signal Distribution”.

The values are rounded to 0.5 % steps. Losses

are not included in the calculation.

Calculation example

Passive DAS I Application | 9

Kathrein offers a variety of support services during the com-

plete lifecycle of passive DAS projects. The broad experience

of a long-experienced innovation and technology leader and

the dedication of a motivated and committed team are uniquely

combined within Kathrein services. Our highly experienced team

in the Kathrein headquarters in Rosenheim and the service hub

in Bucarest together with our local sales partners are the basis

for our support unit.

Top quality is a synonym for Kathrein products and this quality

also guides our implementation of Kathrein services. We help

to realise passive DAS projects with the benefit and reliability for

which Kahtrein is known in the market.

We focus on our customers' needs – our support is available

for single tasks as well as complete projects. We perform the

service works so that our customers can concentrate on their

main tasks.

The following services are provided:

Planning services

Support during the initial setup and all further upgrades like

additions of technologies, network operators and technologies.

We offer the whole range of planning from the scratch and

initial walk tests up to the detailed CAD plans.

Implemention services

Local customer care for each implementation step. We have

a qualified team of local Kathrein branches and partners who

support over the whole project lifecycle. An experienced project

management team takes care that everything is in place on time.

Material services

Delivery of all material turn-key and on time. We make all the

logistics and maintain the spare part chain.

Optimisation services

Providing the quality which mobile users expect. We perform

and analyse site surveys and walk test and present optimisation

proposals which are in compliance with the planning objectives.

In case of troubles in the field, we send our local team on-site

to evaluate the system performance and suggest next steps.

Kathrein Services for Passive DAS

Kathrein Services Passive DAS for 2G, 3G, 4G, WiFi

10 | Passive DAS I Services

Measurements/Walk tests

Analysis of measurements

Optimisation proposals

Feasibility planning

Site survey

Network design

Realisation planning

Project management

Installation services

Start up and site acceptance

Kathrein and 3rd party equipment

Consumables

Spare parts

Repair service

Kathrein offers a variety of support services during the com-

plete lifecycle of passive DAS projects. The broad experience

of a long-experienced innovation and technology leader and

the dedication of a motivated and committed team are uniquely

combined within Kathrein services. Our highly experienced team

in the Kathrein headquarters in Rosenheim and the service hub

in Bucarest together with our local sales partners are the basis

for our support unit.

Top quality is a synonym for Kathrein products and this quality

also guides our implementation of Kathrein services. We help

to realise passive DAS projects with the benefit and reliability for

which Kahtrein is known in the market.

We focus on our customers' needs – our support is available

for single tasks as well as complete projects. We perform the

service works so that our customers can concentrate on their

main tasks.

The following services are provided:

Planning services

Support during the initial setup and all further upgrades like

additions of technologies, network operators and technologies.

We offer the whole range of planning from the scratch and

initial walk tests up to the detailed CAD plans.

Implemention services

Local customer care for each implementation step. We have

a qualified team of local Kathrein branches and partners who

support over the whole project lifecycle. An experienced project

management team takes care that everything is in place on time.

Material services

Delivery of all material turn-key and on time. We make all the

logistics and maintain the spare part chain.

Optimisation services

Providing the quality which mobile users expect. We perform

and analyse site surveys and walk test and present optimisation

proposals which are in compliance with the planning objectives.

In case of troubles in the field, we send our local team on-site

to evaluate the system performance and suggest next steps.

Kathrein Services for Passive DAS

Kathrein Services Passive DAS for 2G, 3G, 4G, WiFi

10 | Passive DAS I Services

Measurements/Walk tests

Analysis of measurements

Optimisation proposals

Feasibility planning

Site survey

Network design

Realisation planning

Project management

Installation services

Start up and site acceptance

Kathrein and 3rd party equipment

Consumables

Spare parts

Repair service

Romanian operator RCS & RDS knows that mobile access in

indoor environment is a crucial topic. In Kathrein’s Romanian

subsidiary, Romkatel, they found a trusted and reliable partner

to build up indoor DAS (Distributed Antenna System) in a variety

of buildings, from the design phase, over full material delivery, up

to the implementation services. During the last year, Romkatel

professionally and successfully implemented more than 70 pas-

sive DAS in shopping malls, supermarkets and office buildings

on behalf of RCS & RDS. In total, 700 Kathrein indoor anten-

nas, 300 splitters and 350 tappers were installed for the RCS &

RDS single-operator projects. Typical antennas in these installa-

tions were e.g. bidirectional antennas, wall-mounted directional

antennas and ceiling mounted omni-antennas. The reliability

of Kathrein indoor products, the 100 % availability and know-

how of the Romkatel design and implementation team were key

factors for RCS & RDS in their supplier selection process. With

Romkatel as a partner and its complex portfolio of materials and

services, including iBwave design, successful turnkey projects

are a guarantee.

When Mauritius Telecom was searching for a supplier to provide

reliable mobile network coverage in public buildings, they chose

Kathrein’s African sales partner Kathrein Africa Ltd. as their

supplier. The key for this choice was Kathrein Africa’s professi-

onalism and long-term experience in RF. During 2015, Kathrein

Africa successfully completed passive DAS for Mauritius Tele-

com in the following buildings:

1. Nexteracom Office Building 1 – 14 floors, 103 antennas,

14 tappers, 55 splitters





4. Citadelle Shopping Mall – 22 floors, 134 antennas,


With these projects, the requirement of mobile connectivity was

fulfilled in the buildings. As a complete solution supplier, Kathrein

Africa Ltd. guided this project from planning to installation to-

wards its success.

Indoor DAS in Mauritius

Country Mauritius

Facility Office buildings, shopping mall

Operator Mauritius Telecom

Year of Installation 2015

Kathrein Sales Partner Kathrein Africa Ltd.

Indoor DAS in Romania

Country Romania

FacilityShopping malls, super markets,

office buildings

Operator RCS & RDS

Year of Installation 2015 – present

Kathrein Sales Partner Romkatel

Lobby of Nexteracom office building with Kathrein antennasShopping mall equipped with Kathrein antennas

Indoor DAS Indoor Passive DAS in Mauritiusfor the Romanian Operator RCS & RDS

Passive DAS I Reference Projects | 11

Examples of Successfully Installed Passive DAS

12 I Passive DAS I Products

Directional Antennas

Omni-Directional Antennas Antennas

Page

Port

sTy

pe38

069

479

087

696

014

2517

1025

0027

0034

0038

0040

0051

5059

2060

0080

0102

49 8

0020

249

1O

mni

8001

0748

1O

mni

7871

1029

1O

mni

7871

1019

787

1201

91

Om

ni78

7120

311

Om

ni78

7120

331

Om

ni78

7120

351

Om

ni78

7120

411

Om

ni78

5108

02V0

2 78

5108

02V0

32

Om

ni80

0107

10 8

0020

710

2O

mni

8001

0712

2O

mni

7871

1014

787

1201

42

Om

ni78

7110

20 7

8712

020

2O

mni

7871

1030

787

1203

02

Om

ni80

0104

651

Dir.

7871

1313

787

1231

31

Dir.

7851

0801

V02

7851

0801

V03

2Di

r.80

0106

772

Dir.

8001

0882

2Di

r.78

7113

11 7

8712

311

2Di

r.78

7123

302

Dir.

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

MIM

O

MIM

O

MIM

O

SISO

SISO

SISO

MIM

O

SISO

MIM

O

MIM

O

MIM

O

SISO

SISO

MIM

OM

IMO

MIM

OSISO

SISO

MIM

OM

IMO

MIM

O

MIM

O

MIM

OM

IMO

MIM

OSI

SO

16 13 15 14 17 18 19 20 23 21 26 22 24 25 27 28 31 29 30 32 33

I 13Passive DAS I Products

80010748 1-Port Omni Antenna 876–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, N Connector

Any previous data sheet issues have now become invalid.

936.

4072

/c

Sub

ject

to

alte

ratio

n.

80010748 Page 1 of 1

N connector, female

Clip the protective housing into position after the antenna has been mounted withthe help of the three supplied screws.

min. Ø 35 mmmin. Ø 1.4 inches

3 ho

les

dia.

5 m

m3

hole

s di

a. 0

.2 in

ches

dia.

160

mm

dia.

6.3

inch

es

13 mm0.5 inches

∅ 210 mm | 8.3 inches

1-Port Indoor 876–960/1710–2700 360° 2dBi

Type No. 80010748Frequency range MHz 876 – 960

1710 – 2700Polarization VerticalGain dBi 2Impedance Ω 50VSWR 876 – 890 MHz: < 2.0

890 – 960 MHz: < 1.71710 – 2170 MHz: < 1.62170 – 2700 MHz: < 2.0

Intermodulation IM3 dBc < –140 (2 x 40 dBm carrier)Max. power W 50 (at 50 °C ambient temperature)Input 1 x N femaleProtection class IP 30Weight g

lb3000.66

Diameter mminches

2108.3

Height mminches

78 (without connector)3.1 (without connector)

Material: Refl ector: Aluminum.Radome: High impact polystyrol, colour: White.Additional painting is possible.

Mounting: Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N connector a hole in the ceiling with a diameter of 35 mm | 1.4 inches is required.

Grounding: All metal parts including the inner conductor are DC grounded.

Available accessories: Broadband power splitters and tappers (694–2700 MHz).

1-Port IndoorOmni AntennaVertical Polarization

876–960 1710–2700

V

The antenna can be operated in all frequency ranges simultaneously.

The antenna needs no additional groundplane.

KATHREIN Solutions GmbH, Anton-Kathrein-Straße 1 – 3, 83004 Rosenheim, GermanyPhone +49 8031 184-0 | www.kathrein.com | [email protected]


936.

4072

/c

Sub

ject

to

alte

ratio

n.

80010748 Page 1 of 1

N connector, female

Clip the protective housing into position after the antenna has been mounted withthe help of the three supplied screws.


3 ho

les

dia.

5 m

m3

hole

s di

a. 0

.2 in

ches

dia.

160

mm

dia.

6.3

inch

es

13 mm0.5 inches

∅ 210 mm | 8.3 inches

1-Port Indoor 876–960/1710–2700 360° 2dBi

Type No. 80010748Frequency range MHz 876 – 960

1710 – 2700Polarization VerticalGain dBi 2Impedance Ω 50VSWR 876 – 890 MHz: < 2.0

890 – 960 MHz: < 1.71710 – 2170 MHz: < 1.62170 – 2700 MHz: < 2.0

Intermodulation IM3 dBc < –140 (2 x 40 dBm carrier)Max. power W 50 (at 50 °C ambient temperature)Input 1 x N femaleProtection class IP 30Weight g

lb3000.66

Diameter mminches

2108.3

Height mminches


Material: Refl ector: Aluminum.Radome: High impact polystyrol, colour: White.Additional painting is possible.

Mounting: Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N connector a hole in the ceiling with a diameter of 35 mm | 1.4 inches is required.

Grounding: All metal parts including the inner conductor are DC grounded.

Available accessories: Broadband power splitters and tappers (694–2700 MHz).


876–960 1710–2700

V

The antenna can be operated in all frequency ranges simultaneously.

The antenna needs no additional groundplane.


Directional Antennas

Omni-Directional Antennas Antennas

Page

Port

sTy

pe38

069

479

087

696

014

2517

1025

0027

0034

0038

0040

0051

5059

2060

0080

0102

49 8

0020

249

1O

mni

8001

0748

1O

mni

7871

1029

1O

mni

7871

1019

787

1201

91

Om

ni78

7120

311

Om

ni78

7120

331

Om

ni78

7120

351

Om

ni78

7120

411

Om

ni78

5108

02V0

2 78

5108

02V0

32

Om

ni80

0107

10 8

0020

710

2O

mni

8001

0712

2O

mni

7871

1014

787

1201

42

Om

ni78

7110

20 7

8712

020

2O

mni

7871

1030

787

1203

02

Om

ni80

0104

651

Dir.

7871

1313

787

1231

31

Dir.

7851

0801

V02

7851

0801

V03

2Di

r.80

0106

772

Dir.

8001

0882

2Di

r.78

7113

11 7

8712

311

2Di

r.78

7123

302

Dir.

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

SISO

MIM

O

MIM

O

MIM

O

SISO

SISO

SISO

MIM

O

SISO

MIM

O

MIM

O

MIM

O

SISO

SISO

MIM

OM

IMO

MIM

OSISO

SISO

MIM

OM

IMO

MIM

O

MIM

O

MIM

OM

IMO

MIM

OSI

SO

16 13 15 14 17 18 19 20 23 21 26 22 24 25 27 28 31 29 30 32 33



78712019 1-Port Omni Antenna 698–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, 4.3-10 Connector

78711019, 78712019 | Page 1 of 1

KATHREIN Solutions GmbH, Anton-Kathrein-Straße 1-3, 83004 Rosenheim, GermanyPhone +49 8031 184-0 | www.kathrein.com | [email protected] K

DP

x010

/c/0

917

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n S

olut

ions

Gm

bH 2

017

All

right

s re

serv

edOrdering information 1-port indoor omni antenna: 78711019 (N connector) 78712019 (4.3-10 connector)

Scope of delivery 1 × antenna in carton

1-Port Indoor Omni 698 – 960 MHz (SISO), 1710 – 2700 MHz (SISO)

Remarks

Specifications

Electrical specifications

Frequency range MHz 698 – 960, 1710 – 2700

Polarisation vertical

Gain 698 – 960 MHz 1710 – 2700 MHz

dBidBi

2.0 4.5

Impedance Ω 50

Maximum effective power W 50

VSWR < 1.8

Passive intermodulation IM3 dBc < −150 @ 2 × 43 dBm carrier

Mechanical specifications

Connector quantity and type78711019 78712019

1 × N female 1 × 4.3-10 female

Mounting type ceiling mounted

Antenna dimensionsAntenna only (diameter × height)Packaging size (H × W × D)

mmmm

186 × 86170 × 180 × 180

RadomeMaterialColour

ABSwhite

Reflector material aluminium

Pigtail mm ≈ 300

Net weight kg 0.25

Operating temperature °C −40 to +65

© 2017 KATHREIN Solutions GmbH The reproduction, distribution and utilisation of this document as well as the communica-tion of its contents to others without express authorisation is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a pat-ent, utility model or design.



78711029 | Page 1 of 1

KATHREIN Solutions GmbH, Anton-Kathrein-Straße 1-3, 83004 Rosenheim, GermanyPhone +49 8031 184-0 | www.kathrein.com | [email protected] KD

Px03

7/a/

0218

| S

ubje

ct to

cha

nge

C

opyr

ight

© K

athr

ein

Solu

tions

Gm

bH 2

018

All r

ight

s re

serv

ed

Ordering information 1-port indoor omni antenna:

78711029



Remarks

Specifications




Gain 698 – 960 MHz 1710 – 2700 MHz

dBidBi

2.0 4.0

Azimuth beamwidth ° 360

Elevation beamwidth698 – 960 MHz 1710 – 2700 MHz

°°

9055

Impedance Ω 50


VSWR698 – 960 MHz 1710 – 2700 MHz

< 1.8< 1.5



Connector quantity and type 1 × N female

Mounting type ceiling-mounted


mmmm

∅ 200 × 120170 × 170 × 180


ABSwhite


Pigtail mm ≈ 300

Net weight kg 0.27


© 2018 KATHREIN Solutions GmbH The reproduction, distribution and utilisation of this document as well as the communica-tion of its contents to others without express authorisation is prohibited. Off enders will be held liable for the payment of damages. All rights reserved in the event of the grant of a pat-ent, utility model or design.


80010249 1-Port Omni Antenna 790–960 (SISO), 1425–3800 (SISO), 5150–6000 (SISO), Vertical Polarisation, N Connector

80020249 1-Port Omni Antenna 790–960 (SISO), 1425–3800 (SISO), 5150–6000 (SISO), Vertical Polarisation, 4.3-10 Connector


936X

023/

a

Sub

ject

to

alte

ratio

n.


790–960 1425–3800 5150–6000

V

1-Port Indoor 790–960/1425–3800/5150–6000 360° 2dBi

• The antenna can be operated in all frequency ranges simultaneously.

• The antenna needs no additional ground plane.

Type No. 80010249 / 80020249Frequency range MHz 790 – 960

1425 – 38005150 – 6000

Polarization Vertical

Gain, typ. dBi ≈ 2

Impedance Ω 50

VSWR 790 – 806 MHz: < 1.7 806 – 960 MHz: < 1.51425 – 1710 MHz: < 2.01710 – 2200 MHz: < 1.42200 – 3800 MHz: < 1.65150 – 5300 MHz: < 2.45300 – 6000 MHz: < 2.0

Intermodulation IM3 dBc 790 – 960 MHz: < –140 (2 x 40 dBm carrier)1710 – 3800 MHz: < –140 (2 x 40 dBm carrier)5150 – 6000 MHz: not relevant

Max. power W 50 (at 50 °C ambient temperature)

Input 80010249: 1 x N female80020249: 1 x 4.3-10 female

Protection class IP 30

Weight glb

Approx. 500Approx. 1.1

Packing size mminches

278 x 278 x 17110.9 x 10.9 x 6.7

Diameter mminches

25810.2

Height mminches


Fire load kWh 2.12

Material: Reflector: Aluminium.Radome: High impact polystyrol, colour: White. Additional painting is possible.

Mounting: Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N and 4.3-10 connector, a hole in the ceiling with a diameter of 35 mm | 1.4 inches is required.

Available accessories: Broadband power splitters and tappers.

80010249: N connector, female80020249: 4.3-10 connector, female

Clip the protective housing into position after the antenna has been mounted with the help of the three supplied screws.

3 ho

les

dia

. 5 m

m3

hole

s d

ia. 0

.2 in

ches

dia

. 160

mm

dia

. 6.3

inch

es


∅ 258 mm | 10.2 inches

KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820

www.kathrein.com 80010249 80020249 Page 1 of 1


80010249 1-Port Omni Antenna 790–960 (SISO), 1425–3800 (SISO), 5150–6000 (SISO), Vertical Polarisation, N Connector

80020249 1-Port Omni Antenna 790–960 (SISO), 1425–3800 (SISO), 5150–6000 (SISO), Vertical Polarisation, 4.3-10 Connector


936X

023/

a

Sub

ject

to

alte

ratio

n.


790–960 1425–3800 5150–6000

V

1-Port Indoor 790–960/1425–3800/5150–6000 360° 2dBi




1425 – 38005150 – 6000

Polarization Vertical


Impedance Ω 50

VSWR 790 – 806 MHz: < 1.7 806 – 960 MHz: < 1.51425 – 1710 MHz: < 2.01710 – 2200 MHz: < 1.42200 – 3800 MHz: < 1.65150 – 5300 MHz: < 2.45300 – 6000 MHz: < 2.0

Intermodulation IM3 dBc 790 – 960 MHz: < –140 (2 x 40 dBm carrier)1710 – 3800 MHz: < –140 (2 x 40 dBm carrier)5150 – 6000 MHz: not relevant

Max. power W 50 (at 50 °C ambient temperature)



Weight glb

Approx. 500Approx. 1.1


278 x 278 x 17110.9 x 10.9 x 6.7

Diameter mminches

25810.2

Height mminches


Fire load kWh 2.12

Material: Reflector: Aluminium.Radome: High impact polystyrol, colour: White. Additional painting is possible.

Mounting: Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N and 4.3-10 connector, a hole in the ceiling with a diameter of 35 mm | 1.4 inches is required.

Available accessories: Broadband power splitters and tappers.



3 ho

les

dia

. 5 m

m3

hole

s d

ia. 0

.2 in

ches

dia

. 160

mm

dia

. 6.3

inch

es


∅ 258 mm | 10.2 inches


www.kathrein.com 80010249 80020249 Page 1 of 1

78712031 1-Port Omni Antenna 698–960 (SISO), 1690–4000 (SISO), Vertical Polarisation, 4.3-10 Connector

78712031 | Page 1 of 1


Px03

2/a/

0218

| S

ubje

ct to

cha

nge

C

opyr

ight

© K

athr

ein

Solu

tions

Gm

bH 2

018

All r

ight

s re

serv

ed

Ordering information 1-port indoor omni antenna:

78712031



Remarks

Specifications




Gain 698 – 960 MHz 1690 – 4000 MHz

dBidBi

2.0 4.0

Impedance Ω 50


VSWR698 – 960 MHz 1690 – 4000 MHz

< 1.8< 1.5



Connector quantity and type 1 × 4.3-10 female



mmmm

∅ 200 × 120170 × 170 × 180


ABSwhite

Reflector material brass

Pigtail mm ≈ 300

Net weight kg 0.27




78712033 1-Port Card Omni Antenna 698–960 (SISO), 1690–2700 (SISO), 3400–4000 (SISO), Horizontal Polarisation, 4.3-10 Connector

78712033 | Page 1 of 1


Px03

3/a/

0218

| S

ubje

ct to

cha

nge

C

opyr

ight

© K

athr

ein

Solu

tions

Gm

bH 2

018

All r

ight

s re

serv

ed

Ordering information 1-port indoor card omni

antenna: 78712033


1-Port Indoor Card Omni 698 – 960 MHz (SISO), 1690 – 2700 MHz (SISO), 3400 – 4000 MHz (SISO)

Remarks

Specifications


Frequency range MHz 698 – 960, 1690 – 2700, 3400 – 4000

Polarisation horizontal

Gain 698 – 806 MHz 806 – 960 MHz 1690 – 2700 MHz 3400 – 4000 MHz

dBi dBidBidBi

2.53.55.04.0

Impedance Ω 50


VSWR698 – 2700 MHz 3400 – 4000 MHz

< 1.8< 2.0





Antenna dimensionsAntenna only (H × W × D) mm 180 × 110 × 7


ABSwhite

Reflector material PCB

Pigtail mm ≈ 300

Net weight kg ≈ 0.3




78712033 1-Port Card Omni Antenna 698–960 (SISO), 1690–2700 (SISO), 3400–4000 (SISO), Horizontal Polarisation, 4.3-10 Connector

78712033 | Page 1 of 1


Px03

3/a/

0218

| S

ubje

ct to

cha

nge

C

opyr

ight

© K

athr

ein

Solu

tions

Gm

bH 2

018

All r

ight

s re

serv

ed

Ordering information 1-port indoor card omni

antenna: 78712033


1-Port Indoor Card Omni 698 – 960 MHz (SISO), 1690 – 2700 MHz (SISO), 3400 – 4000 MHz (SISO)

Remarks

Specifications





dBi dBidBidBi

2.53.55.04.0

Impedance Ω 50


VSWR698 – 2700 MHz 3400 – 4000 MHz

< 1.8< 2.0





Antenna dimensionsAntenna only (H × W × D) mm 180 × 110 × 7


ABSwhite


Pigtail mm ≈ 300




78712035 1-Port Slim Omni Antenna 698–960 (SISO),1690–2700 (SISO), 3400–4000 (SISO), Horizontal Polarisation, 4.3-10 Connector

78712035 | Page 1 of 1


Px03

4/a/

0218

| S

ubje

ct to

cha

nge

C

opyr

ight

© K

athr

ein

Solu

tions

Gm

bH 2

018

All r

ight

s re

serv

ed

Ordering information 1-port indoor slim omni

antenna: 78712035


1-Port Indoor Slim Omni 698 – 960 MHz (SISO), 1690 – 2700 MHz (SISO), 3400 – 4000 MHz (SISO)

Remarks

Specifications





dBi dBidBidBi

2.53.55.03.5

Impedance Ω 50


VSWR698 – 2700 MHz 3400 – 4000 MHz

< 1.8< 2.0





Antenna dimensionsAntenna only (diameter × height) mm ∅ 190 × 7.3


ABSwhite


Pigtail mm ≈ 300





78712041 1-Port Omni Antenna 380–6000 (SISO), Vertical Polarisation, 4.3-10 Connector

78712041 | Page 1 of 1


DP

x045

/a/0

418

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved

PRELIMINARY

Datasheet

Ordering information 1-port indoor omni antenna: 78712041


1-Port Indoor Omni 380 – 6000 MHz

Remarks

Specifications


Frequency range MHz 380 – 520 600 – 960 1690 – 2700 2700 – 4300 4300 – 6000


Gain dBi 1.5 2.5 4.5 5.0 5.5

Impedance Ω 50


VSWR ≤ 3.0 ≤ 2.0 ≤ 2.0 ≤ 2.0 ≤ 2.0

Passive intermodulation IM3 dBc ≤ −150 @ 2 × 43 dBm carrier




Antenna dimensionsAntenna only (∅ × H) mm 285 × 135


ABSwhite


Pigtail mm ≈ 300



© 2018 KATHREIN Solutions GmbH The reproduction, distribution and utilisation of this document as well as the communication of its contents to others without express authorisation is prohibited. O enders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.

PRELIMINARY

Datasheet


80010710 2-Port Omni Antenna 790–960 (SISO), 1710–2700 (MIMO), Dual Polarisation, N Connector

80020710 2-Port Omni Antenna 790–960 (SISO), 1710–2700 (MIMO), Dual Polarisation, 4.3-10 Connector



www.kathrein.com

936X

022/

a

Sub

ject

to

alte

ratio

n.

80010710 80020710 Page 1 of 1

2-Port IndoorOmni AntennaDual Polarization

790–960 1710–2700 1710–2700

V H


dia

. 312

mm

dia

. 12.

3 in

ches 30 mm

1.2 inches



3 ho

les

dia

. 5 m

m3

hole

s d

ia. 0

.2 in

ches

790–9601710–2700

VPol1710–2700

HPol

80010710: N connector80020710: 4.3-10 connector

2-Port Indoor 790–960/1710–2700/1710–2700 360° 2dBi




1710 – 27001710 – 2700

Polarization Vertical Horizontal


Impedance Ω 50

VSWR 790 – 960 MHz: < 2.01710 – 2700 MHz: < 2.0

1710 – 2700 MHz: < 2.0

Isolation between ports

dB > 30

Intermodulation IM3 dBc < –140 (2 x 40 dBm carrier)

Max. power W 50 ( at 50 °C ambient temperature)



Weight kglb

12.2

Packing sizemm

inches

80010710:400 x 400 x 20015.7 x 15.7 x 8.3

80020710:387 x 387 x 16915.2 x 15.2 x 6.7

Diameter mminches

38015.0

Height mminches


Fire load kWh 4.41

Material: Reflector: Aluminium. Radome: High impact polystyrol, colour: White. Additional painting is possible.

Mounting: Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N and 4.3-10 connectors, a hole in the ceiling with a diameter of 65 mm | 2.6 inches is required.

Available accessories: Broadband power splitters and tappers (790 – 2700 MHz).

Ø 380 mm | 15.0 inches


78711014 2-Port Omni Antenna 698–960 (SISO), 1710–2700 (MIMO), Dual Polarisation, N Connector

78712014 2-Port Omni Antenna 698–960 (SISO), 1710–2700 (MIMO), Dual Polarisation, 4.3-10 Connector

78711014, 78712014 | Page 1 of 1


DP

x009

/b/0

917

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n S

olut

ions

Gm

bH 2

017

All

right

s re

serv

ed

Ordering information 2-port indoor omni antenna: 78711014 (N connector) 78712014 (4.3-10 connector)


2-Port Indoor Omni 698 – 960 MHz (SISO), 1710 – 2700 MHz (MIMO)

Remarks

Specifications


Frequency range 1) MHz 698 – 800 800 – 960 1710 – 2700 1710 – 1880 1880 – 2700

Polarisation vertical horizontal

Gain 1) dBi 1.5 3.5 4.0

Isolation dB > 26

Impedance Ω 50

Maximum effective power 2) W 50

VSWR 1) < 1.8 < 1.5 < 1.8 < 1.5



Connector quantity and type7871101478712014

2 × N female2 × 4.3-10 female



mmmm

203 × 113170 × 180 × 180


ABSwhite

Reflector material brass

Pigtail mm ≈ 300



1) valid for port 1 and port 22) per port



78510802V02 2-Port Omni Antenna 694–960 (SISO), 1710–2690 (MIMO), Dual Polarisation, N Connector

78510802V03 2-Port Omni Antenna 694–960 (SISO), 1710–2690 (MIMO), Dual Polarisation, 4.3-10 Connector

KATHREIN-Werke KG, Anton-Kathrein-Straße 1-3, 83022 Rosenheim, GermanyPhone +49 8031 184-0 | Fax +49 8031 184-820 | www.kathrein.com | [email protected]

78510802V02/78510802V03 | Page 1 of 2

Ordering information K-BOW ceiling mounted omnidirectional antenna 78510802V02, 78510802V03

Scope of Delivery Omnidirectional antenna in carton – optional mounting kits to be ordered separately!

Mounting instructions

K-BOW Ceiling Mounted Omnidirectional Antenna 694 – 960 MHz, 1710 – 2690 MHz (MiMo)

Remarks

Easiest installation with customized mounting kits

Small form factor for any indoor application

MiMo support for high bands 1710 – 2690 MHz

Two connector options: N and 4.3-10

The K-BOW Omnidirectional Antenna offers highest performance at lowest impact on interior design. Based on its small dimensions and de-signed for “in ceiling” installation it is the ideal fit for any indoor coverage demands. Two different mounting options provide a solution for nearly any ceiling material, no matter if mineral wool or wooden material.

The visible part of the polycarbonate blend housing can be painted using conventional acrylic lacquer.

In the high band, the antenna supports full polarization MiMo based on orthogonal antenna dipoles with a high isolation.

Specifications

Main port: Frequency range Polarization

[MHz] 694 – 960 and 1710 – 2690Vertical

MiMo port: Frequency range Polarization

[MHz] 1710 – 2690Horizontal

Gain [dBi] ~ 2VSWR < 2.0

Isolation (Main <–> MiMo) [dB] > 25

Passive Intermodulation IM3 [dBc] < –140 (@ 2 x 40 dBm carrier)

Max. total RF Power [W] 20 (@ 50 °C ambient temperature)

RF ports and connector type 78510802V02: 2 x N (female)78510802V03: 2 x 4.3-10 (female)

Impedance [Ω] 50

Diameter [mm] 292

Height (without connectors) [mm] 120

Package dimensions (H x W x D) [mm] 173 x 325 x 325

Weight [kg] 0.65

Protection Class IP 30

Storage temperature range [°C] –25 … +70

Operational temperature range [°C] –5 … +55

© 2016 KATHREIN-Werke KG The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibi-ted. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.

The material properties of the ceiling panel used have an impact on the performance of the antenna.

The above specified measurement results were determined by using an off-the-shelf medium-densi-

ty fiberboard (MDF) ceiling panel together with the cover plate 78510810V02.

936.

5080

c | S

ubje

ct t

o ch

ange

s

120

21

Ø 260

Ø 292

KATHREIN-Werke KG, Anton-Kathrein-Straße 1-3, 83022 Rosenheim, GermanyPhone +49 8031 184-0 | Fax +49 8031 184-820 | www.kathrein.com | [email protected]

78510802V02/78510802V03 | Page 1 of 2

Ordering information K-BOW ceiling mounted omnidirectional antenna 78510802V02, 78510802V03

Scope of Delivery Omnidirectional antenna in carton – optional mounting kits to be ordered separately!

Mounting instructions

K-BOW Ceiling Mounted Omnidirectional Antenna 694 – 960 MHz, 1710 – 2690 MHz (MiMo)

Remarks

Easiest installation with customized mounting kits

Small form factor for any indoor application

MiMo support for high bands 1710 – 2690 MHz


The K-BOW Omnidirectional Antenna offers highest performance at lowest impact on interior design. Based on its small dimensions and de-signed for “in ceiling” installation it is the ideal fit for any indoor coverage demands. Two different mounting options provide a solution for nearly any ceiling material, no matter if mineral wool or wooden material.

The visible part of the polycarbonate blend housing can be painted using conventional acrylic lacquer.

In the high band, the antenna supports full polarization MiMo based on orthogonal antenna dipoles with a high isolation.

Specifications

Main port: Frequency range Polarization

[MHz] 694 – 960 and 1710 – 2690Vertical

MiMo port: Frequency range Polarization

[MHz] 1710 – 2690Horizontal

Gain [dBi] ~ 2VSWR < 2.0

Isolation (Main <–> MiMo) [dB] > 25

Passive Intermodulation IM3 [dBc] < –140 (@ 2 x 40 dBm carrier)

Max. total RF Power [W] 20 (@ 50 °C ambient temperature)

RF ports and connector type 78510802V02: 2 x N (female)78510802V03: 2 x 4.3-10 (female)

Impedance [Ω] 50

Diameter [mm] 292

Height (without connectors) [mm] 120

Package dimensions (H x W x D) [mm] 173 x 325 x 325

Weight [kg] 0.65

Protection Class IP 30

Storage temperature range [°C] –25 … +70

Operational temperature range [°C] –5 … +55

© 2016 KATHREIN-Werke KG The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibi-ted. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.

The material properties of the ceiling panel used have an impact on the performance of the antenna.

The above specified measurement results were determined by using an off-the-shelf medium-densi-

ty fiberboard (MDF) ceiling panel together with the cover plate 78510810V02.

936.

5080

c | S

ubje

ct t

o ch

ange

s

120

21

Ø 260

Ø 292


78711020 2-Port Omni Antenna 698–960 (MIMO), 1710–2700 (MIMO), Dual-Vertical Polarisation, N Connector

78712020 2-Port Omni Antenna 698–960 (MIMO), 1710–2700 (MIMO), Dual-Vertical Polarisation, 4.3-10 Connector

78711020, 78712020 | Page 1 of 1


DP

x011

/c/0

418

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved



2-Port Indoor Omni 698 – 960 MHz (MIMO), 1710 – 2700 MHz (MIMO)

Remarks

Specifications


Frequency range 1) MHz 698 – 960, 1710 – 2700

Polarisation dual vertical

Gain 1)

698 – 960 MHz 1710 – 2700 MHz

dBidBi

3.0 4.5

Isolation dB > 20

Impedance Ω 50


VSWR 1)

698 – 960 MHz 1710 – 2700 MHz

< 2.0< 1.7







mmmm

215 × 47155 × 120 × 225


ABSwhite

Reflector material brass, PCB

Pigtail mm ≈ 300








78711020, 78712020 | Page 1 of 1


DP

x011

/c/0

418

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved




Remarks

Specifications




Gain 1)

698 – 960 MHz 1710 – 2700 MHz

dBidBi

3.0 4.5

Isolation dB > 20

Impedance Ω 50


VSWR 1)

698 – 960 MHz 1710 – 2700 MHz

< 2.0< 1.7







mmmm

215 × 47155 × 120 × 225


ABSwhite


Pigtail mm ≈ 300







78711030, 78712030 | Page 1 of 1


DP

x024

/b/0

218

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved




Remarks

Specifications




Gain 1)

698 – 960 MHz 1710 – 4000 MHz

dBidBi

3.0 4.5

Isolation dB > 20

Impedance Ω 50


VSWR 1)

698 – 960 MHz 1710 – 4000 MHz

≤ 2.0≤ 1.7







mmmm

47 × 215155 × 120 × 225


ABSwhite


Pigtail mm ≈ 300




© 2018 KATHREIN Solutions GmbH The reproduction, distribution and utilisation of this document as well as the communica-tion of its contents to others without express authorisation is prohibited. O enders will be held liable for the payment of damages. All rights reserved in the event of the grant of a pat-ent, utility model or design.


80010712 2-Port Omni Antenna 694–5920 (MIMO), Dual-Vertical Polarisation, 4.3-10 Connector

936.

5360

/c

Sub

ject

to

alte

ratio

n.

2-Port IndoorMIMO Omni AntennaVertical Polarization

694–5920 694–5920

V V

2-Port Indoor 694–5920 360° 2dBi

Type No. 80010712Frequency rangePort 1 and Port 2

MHz Port 1 694 – 9601427 – 15181695 – 26903400 – 38004920 – 5920

Port 2 694 – 9601427 – 15181695 – 26903400 – 38004920 – 5920

Polarization Dual VerticalGain, typ. dBi 2Gain, max. dBi 694 – 960 MHz: 4.0 – 5.5

1427 – 1518 MHz: 5.0 – 5.51695 – 2690 MHz: 5.0 – 7.53400 – 3800 MHz: 5.5 – 7.04920 – 5920 MHz: 7.0 – 8.0

Impedance Ω 50VSWR 694 – 960 MHz: < 2.0

1427 – 1518 MHz: < 2.01695 – 2690 MHz: < 2.03400 – 3800 MHz: < 2.04920 – 5920 MHz: < 2.0

Isolation dB 694 – 960 MHz: > 201427 – 1518 MHz: > 201695 – 2690 MHz: > 203400 – 3800 MHz: > 204920 – 5920 MHz: > 20

Intermodulation IM3(2 x 40 dBm carrier)

dBc 694 – 960 MHz: < –1501427 – 1518 MHz: < –1501695 – 2690 MHz: < –1503400 – 3800 MHz: < –150

4920 – 5920 MHz: not relevantMax. power per input(at 50 °C ambient temperature)

W 694 – 960 MHz: 201427 – 1518 MHz: 201695 – 2690 MHz: 203400 – 3800 MHz: 104920 – 5920 MHz: 5

Max. effektive power for the antenna

W 20(at 50 °C ambient temperature)

Input 2 x 4.3-10 female(angular connector required)

Protection class IP 30Weight g

lb9502.1


350 x 350 x 15013.8 x 13.8 x 5.9

Diameter(antenna module)

mminches

32012.6

Height(antenna module)

mminches

893.5

Fire load kWh 3.18

Material: Refl ector: Aluminum.Radome: ASA/PC blend, colour: White. Additional painting is possible.

Mounting: – On-ceiling mounting:Mounting kit 85010200 required

– Concealed antenna installation (ceiling thickness 3 – 35 mm | 0.12 – 1.38 inches):Mounting kit 85010201 required

– Hidden antenna installation in double l ayer ceiling, fl oors or similar – no additional mounting kit required

80010712 Page 1 of 4

Accessories (order separately if required)

Type No. Description

85010200 On-ceiling mounting kit85010201 Support ring for concealed antenna

installation

The antenna can be operated in all indicated frequency ranges simultaneously.



80010712 2-Port Omni Antenna 694–5920 (MIMO), Dual-Vertical Polarisation, 4.3-10 Connector

936.

5360

/c

Sub

ject

to

alte

ratio

n.

2-Port IndoorMIMO Omni AntennaVertical Polarization

694–5920 694–5920

V V

2-Port Indoor 694–5920 360° 2dBi

Type No. 80010712Frequency rangePort 1 and Port 2

MHz Port 1 694 – 9601427 – 15181695 – 26903400 – 38004920 – 5920

Port 2 694 – 9601427 – 15181695 – 26903400 – 38004920 – 5920

Polarization Dual VerticalGain, typ. dBi 2Gain, max. dBi 694 – 960 MHz: 4.0 – 5.5

1427 – 1518 MHz: 5.0 – 5.51695 – 2690 MHz: 5.0 – 7.53400 – 3800 MHz: 5.5 – 7.04920 – 5920 MHz: 7.0 – 8.0


1427 – 1518 MHz: < 2.01695 – 2690 MHz: < 2.03400 – 3800 MHz: < 2.04920 – 5920 MHz: < 2.0

Isolation dB 694 – 960 MHz: > 201427 – 1518 MHz: > 201695 – 2690 MHz: > 203400 – 3800 MHz: > 204920 – 5920 MHz: > 20

Intermodulation IM3(2 x 40 dBm carrier)

dBc 694 – 960 MHz: < –1501427 – 1518 MHz: < –1501695 – 2690 MHz: < –1503400 – 3800 MHz: < –150

4920 – 5920 MHz: not relevantMax. power per input(at 50 °C ambient temperature)

W 694 – 960 MHz: 201427 – 1518 MHz: 201695 – 2690 MHz: 203400 – 3800 MHz: 104920 – 5920 MHz: 5

Max. effektive power for the antenna

W 20(at 50 °C ambient temperature)

Input 2 x 4.3-10 female(angular connector required)

Protection class IP 30Weight g

lb9502.1


350 x 350 x 15013.8 x 13.8 x 5.9

Diameter(antenna module)

mminches

32012.6

Height(antenna module)

mminches

893.5

Fire load kWh 3.18

Material: Refl ector: Aluminum.Radome: ASA/PC blend, colour: White. Additional painting is possible.

Mounting: – On-ceiling mounting:Mounting kit 85010200 required

– Concealed antenna installation (ceiling thickness 3 – 35 mm | 0.12 – 1.38 inches):Mounting kit 85010201 required

– Hidden antenna installation in double l ayer ceiling, fl oors or similar – no additional mounting kit required

80010712 Page 1 of 4

Accessories (order separately if required)

Type No. Description

85010200 On-ceiling mounting kit85010201 Support ring for concealed antenna

installation

The antenna can be operated in all indicated frequency ranges simultaneously.


80010465 1-Port Directional Antenna 790–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, N Connector


936.

3036

/g

Sub

ject

to

alte

ratio

n.

80010465 Page 1 of 1

1-Port Indoor AntennaVertical PolarizationHPBWIntegrated Combiner

790–960 1710–2700

V V

90°

C

90°

3 dB

10

0

90°

Horizontal Pattern

Mounting:

Mount the attachment plate to the wall using two screws of 4 mm | 0.16 inches diameter in the position as indicated.

Align the antenna over the attachment plate.

Pull the antenna to the stop.

C

N

790–960VPol

1710–2700VPol

1-Port Indoor 790–960/1710–2700 C 90° 7dBi

Type No. 80010465Frequency range MHz 790 – 960 / 1710 – 2700Polarization VerticalGain dBi Approx. 7Half-power beam width

° Horizontal: Approx. 90


806 – 960 MHz: < 2.01710 – 2700 MHz: < 2.0

Max. power W 50 (at 50 °C ambient temperature)Input Cable RG 223/CU of 1m length, white,

with N female connectorProtection class IP 30Weight g | lb 500 | 1.1Packing size mm

inches363 x 152 x 6214.3 x 6.0 x 2.4

Height/width/depth mminches

231 / 140 / 509.1 / 5.5 / 2.0

Fire load 1.42 kWh

Material: Refl ector: Aluminum.Radome: High impact polystyrol, colour: White.Additional painting is possible.Mounting plates: Stainless steel.

Mounting: Two holes of 6 mm | 0.24 inches diameter in the mounting plate. Screws are not supplied.Avoid stressing the cable. No stress on the hexagonal crimp. Minimum cable bending radius: 30 mm | 1.18 inches with out tensile load. Cable must be fi xed.





78712313 1-Port Directional Antenna 698–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, 4.3-10 Connector

78711313, 78712313 | Page 1 of 1


DP

x013

/c/0

218

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved

Ordering information 1-port indoor directional antenna: 78711313 (N connector) 78712313 (4.3-10 connector)


1-Port Indoor Directional 698 – 960 MHz (SISO), 1710 – 2700 MHz (SISO)

Remarks

Specifications


Frequency range MHz 698 – 960 1710 – 2700


Gain dBi 7.0 9.0


Elevation beamwidth ° 55

Impedance Ω 50


VSWR ≤ 2.0 ≤ 1.8



Connector quantity and type 78711313: 1 × N female 78712313: 1 × 4.3-10 female

Mounting type wall mount or pole mount (pole ∅: 38 to 52 mm)

Antenna dimensionsAntenna only (H × W × D)Packaging size (H × W × D)

mmmm

165 × 155 × 50200 × 170 × 70


ABSwhite


Pigtail mm ≈ 300

Net weight kg 0.4





78712313 1-Port Directional Antenna 698–960 (SISO), 1710–2700 (SISO), Vertical Polarisation, 4.3-10 Connector

78711313, 78712313 | Page 1 of 1


DP

x013

/c/0

218

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved

Ordering information 1-port indoor directional antenna: 78711313 (N connector) 78712313 (4.3-10 connector)


1-Port Indoor Directional 698 – 960 MHz (SISO), 1710 – 2700 MHz (SISO)

Remarks

Specifications


Frequency range MHz 698 – 960 1710 – 2700


Gain dBi 7.0 9.0


Elevation beamwidth ° 55

Impedance Ω 50


VSWR ≤ 2.0 ≤ 1.8



Connector quantity and type 78711313: 1 × N female 78712313: 1 × 4.3-10 female

Mounting type wall mount or pole mount (pole ∅: 38 to 52 mm)


mmmm

165 × 155 × 50200 × 170 × 70


ABSwhite


Pigtail mm ≈ 300

Net weight kg 0.4



80010677 2-Port Directional Antenna 790–960 (SISO), 1710–2700 (SISO), Vertical/Dual Polarisation, N Connector


2-Port Indoor 790–960/1710–2700 C 90° 7dBi

Type No. 80010677Frequency range MHz 790 – 960 1710 – 2700Polarization Vertical +45°, –45°Gain dBi Approx. 7 Approx. 2 x 7Half-power beam width

° Horizontal: Approx. 90

Impedance Ω 50VSWR < 2.0Isolation, between ports

dB > 25

Max. power W 50 (at 50 °C ambient temperature)Input 2x Cable RG 223/CU of 1m length, white,

with N female connectorProtection class IP 30Weight g | lb 600 | 1.32Packing size mm

inches363 x 152 x 6214.3 x 6.0 x 2.4


232 / 140 / 509.1 / 5.5 / 2.0

Fire load 1.6 kWh

Material: Refl ector: Aluminum.Radome: High impact polystyrol, colour: White.Additional painting is possible.Mounting plates: Stainless steel.

Mounting: Position: Wall and ceiling possible.Two holes of 6 mm | 0.24 inches diameter in the mounting plate. Screws are not supplied.Avoid stressing the cable. No stress on the hexagonal crimp. Minimum cable bending radius: 30 mm | 1.18 inches without tensile load. Cable must be fi xed.


936.

3616

/f

Sub

ject

to

alte

ratio

n.

80010677 Page 1 of 1

2-Port Indoor AntennaVertical / Dual PolarizationHPBWIntegrated Combiner

790–960 1710–27001710–2700

V X (+45°)X (–45°)

90°

C

90°90°

3 dB

10

0

90°

Horizontal Pattern

Mounting:

Mount the attachment plate to the wall/ceiling using two screws of 4 mm | 0.16 inches diameter in the position as indicated.

Align the antenna over the attachment plate.

Pull the antenna to the stop.

C

N

790–960VPol

1710–2700XPol –45°

1710–2700XPol +45°

N



80010882 2-Port Directional Antenna 694–960 (MIMO), 1710–2690 (MIMO), Dual Polarisation, 4.3-10 Connector


2-Port Indoor 694–960/1710–2690 C 80°/65° 7/8dBi

Type No. 80010882Frequency range MHz 694 – 960 1710 – 2690Polarization ° +45, –45 +45, –45Gain dBi 7 8Half-power beam width; hor., ver. ° typ. 80 typ. 65

Impedance Ω 50VSWR 694 – 960 MHz: ≤ 2.2

1710 – 2690 MHz: ≤ 2.2Isolation, between ports dB

694 – 806 MHz: ≥ 16 806 – 960 MHz: ≥ 201710 – 2690 MHz: ≥ 20

Max. power per port W 20 (at 50 °C ambient temperature)Passive Inter-modulation PIM 3 dBc < –140 (at 2 x 40 dBm carrier)

Input 2 x 4.3-10 femaleProtection class IP 30Weight kg | lb 1.6 | 3.5Packing size mm

inches417 / 281 / 14116.4 / 11.1 / 5.6


399 / 237 / 6315.7 / 9.3 / 2.5

Operating temperature range °C –5 … +55

Fire protection classification UL 94-V2Fire load kWh 5.3

Material: Reflector: Brass.Radome: ASA / PC, colour: White.

Mounting: Position: Wall and ceiling possible.The antenna is mounted with four screws (4.5 mm | 0.18 inches nominal diameter, srew head dia meter max. 9 mm | 0.35 inches). Screws are not supplied. After antenna mounting install the antenna cover.


936.

5144

/d

Sub

ject

to

alte

ratio

n.

80010882 Page 1 of 1

3 dB

10

0

80°

3 dB

10

0

65°

Horizontal / Vertical Pattern694 – 960 MHz


Antenna rear side with four drilling holes

All dimensions in mm | inches

Antenna and antenna cover

C

4.3-10

694–960–45°

1710–2690–45°

C

4.3-10

694–960+45°

1710–2690+45°

260

| 10.

2

205 | 8.1

2-Port Indoor AntennaDual PolarizationHPBWIntegrated Combiner

1710–2690694–960

XX

65°80°

C





2-Port Indoor 694–960/1710–2690 C 80°/65° 7/8dBi

Type No. 80010882Frequency range MHz 694 – 960 1710 – 2690Polarization ° +45, –45 +45, –45Gain dBi 7 8Half-power beam width; hor., ver. ° typ. 80 typ. 65

Impedance Ω 50VSWR 694 – 960 MHz: ≤ 2.2

1710 – 2690 MHz: ≤ 2.2Isolation, between ports dB

694 – 806 MHz: ≥ 16 806 – 960 MHz: ≥ 201710 – 2690 MHz: ≥ 20

Max. power per port W 20 (at 50 °C ambient temperature)Passive Inter-modulation PIM 3 dBc < –140 (at 2 x 40 dBm carrier)

Input 2 x 4.3-10 femaleProtection class IP 30Weight kg | lb 1.6 | 3.5Packing size mm

inches417 / 281 / 14116.4 / 11.1 / 5.6


399 / 237 / 6315.7 / 9.3 / 2.5

Operating temperature range °C –5 … +55

Fire protection classification UL 94-V2Fire load kWh 5.3

Material: Reflector: Brass.Radome: ASA / PC, colour: White.

Mounting: Position: Wall and ceiling possible.The antenna is mounted with four screws (4.5 mm | 0.18 inches nominal diameter, srew head dia meter max. 9 mm | 0.35 inches). Screws are not supplied. After antenna mounting install the antenna cover.


936.

5144

/d

Sub

ject

to

alte

ratio

n.

80010882 Page 1 of 1

3 dB

10

0

80°

3 dB

10

0

65°



Antenna rear side with four drilling holes

All dimensions in mm | inches

Antenna and antenna cover

C

4.3-10

694–960–45°

1710–2690–45°

C

4.3-10

694–960+45°

1710–2690+45°

260

| 10.

2

205 | 8.1

2-Port Indoor AntennaDual PolarizationHPBWIntegrated Combiner

1710–2690694–960

XX

65°80°

C


78510801V02 2-Port Directional Antenna 694–960 (MIMO), 1710–2690 (MIMO), Dual Polarisation, N Connector

78510801V03 2-Port Directional Antenna 694–960 (MIMO), 1710–2690 (MIMO), Dual Polarisation, 4.3-10 Connector

KATHREIN Solutions GmbH, Anton-Kathrein-Straße 1-3, 83004 Rosenheim, GermanyPhone +49 8031 184-0 | www.kathrein.com | [email protected]

78510801V02, 78510801V03 | Page 1 of 2

936.

5079

/f/0

318

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved

Ordering information K-BOW wall mounted directional antenna: 78510801V02 (N) 78510801V03 (4.3-10)

Scope of delivery Directional antenna in carton Cable inlet Drilling template Mounting instructions

K-BOWWall Mounted Directional Antenna 694 – 960 MHz (MIMO), 1710 – 2690 MHz (MIMO)

Remarks

Easiest installation

Full polarisation MIMO support for entire frequency range

Integrated combiner


The K-BOW indoor antenna product line offers highest performance at lowest impact on

interior design. Based on its small dimensions and designed to fit any installation demands,

the K-BOW directional antenna is the ideal solution for indoor coverage with a demand for

sector type antennas. The antenna is easy to install on any material with three fixing holes.

The visible part of the polycarbonate blend housing can be painted using conventional

water-based lacquer. For installation, the cover can easily be removed.

The antenna supports full polarisation MIMO based on orthogonal antenna dipoles with a

high isolation in the entire frequency band.

Specifications

Frequency range MHz 694 – 960 (MIMO) and 1710 – 2690 (MIMO)

Main port polarisationMIMO port polarisation

X-pol +45°X-pol −45°

Gain dBi ~ 7

Horizontal half power beam width:694 – 960 MHz1710 – 2690 MHz

typ. 80°typ. 65°

Vertical half power beam width694 – 960 MHz1710 – 2690 MHz

typ. 80° typ. 60°

VSWR694 – 960 MHz1710 – 2690 MHz

≤ 2.2≤ 2.2

Isolation (Main ⇔ MIMO):694 – 806 MHz806 – 960 MHz1710 – 2690 MHz

dB≥ 16≥ 20≥ 20

Passive intermodulation IM3 dBc < −140 (@ 2 × 26.5 dBm carrier)

Max. total RF power W 20 (@ 50 °C ambient temperature)

RF ports and connector type78510801V02 78510801V03

2 × N (female)2 × 4.3-10 (female)

Impedance Ω 50

Antenna dimensions: (H × W × D) mm 422 × 200 × 60

Package dimensions (H × W × D) mm 444 × 252 × 145

Weight kg 1.5


Storage temperature range °C −25 to +70

Operational temperature range °C −5 to +55


KATHREIN Solutions GmbH, Anton-Kathrein-Straße 1-3, 83004 Rosenheim, GermanyPhone +49 8031 184-0 | www.kathrein.com | [email protected]

78510801V02, 78510801V03 | Page 1 of 2

936.

5079

/f/0

318

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved

Ordering information K-BOW wall mounted directional antenna: 78510801V02 (N) 78510801V03 (4.3-10)

Scope of delivery Directional antenna in carton Cable inlet Drilling template Mounting instructions

K-BOWWall Mounted Directional Antenna 694 – 960 MHz (MIMO), 1710 – 2690 MHz (MIMO)

Remarks

Easiest installation

Full polarisation MIMO support for entire frequency range

Integrated combiner


The K-BOW indoor antenna product line offers highest performance at lowest impact on

interior design. Based on its small dimensions and designed to fit any installation demands,

the K-BOW directional antenna is the ideal solution for indoor coverage with a demand for

sector type antennas. The antenna is easy to install on any material with three fixing holes.

The visible part of the polycarbonate blend housing can be painted using conventional

water-based lacquer. For installation, the cover can easily be removed.

The antenna supports full polarisation MIMO based on orthogonal antenna dipoles with a

high isolation in the entire frequency band.

Specifications

Frequency range MHz 694 – 960 (MIMO) and 1710 – 2690 (MIMO)

Main port polarisationMIMO port polarisation

X-pol +45°X-pol −45°

Gain dBi ~ 7

Horizontal half power beam width:694 – 960 MHz1710 – 2690 MHz

typ. 80°typ. 65°

Vertical half power beam width694 – 960 MHz1710 – 2690 MHz

typ. 80° typ. 60°

VSWR694 – 960 MHz1710 – 2690 MHz

≤ 2.2≤ 2.2

Isolation (Main ⇔ MIMO):694 – 806 MHz806 – 960 MHz1710 – 2690 MHz

dB≥ 16≥ 20≥ 20

Passive intermodulation IM3 dBc < −140 (@ 2 × 26.5 dBm carrier)

Max. total RF power W 20 (@ 50 °C ambient temperature)

RF ports and connector type78510801V02 78510801V03

2 × N (female)2 × 4.3-10 (female)

Impedance Ω 50

Antenna dimensions: (H × W × D) mm 422 × 200 × 60

Package dimensions (H × W × D) mm 444 × 252 × 145

Weight kg 1.5


Storage temperature range °C −25 to +70

Operational temperature range °C −5 to +55



78711311 2-Port Directional Antenna 698–960 (MIMO), 1710–2700 (MIMO), Dual Polarisation, N Connector


78711311, 78712311 | Page 1 of 1


DP

x012

/b/0

917

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n S

olut

ions

Gm

bH 2

017

All

right

s re

serv

edOrdering information 2-port indoor directional antenna: 78711311 (N connector) 78712311 (4.3-10 connector)


2-Port Indoor Directional 698 – 960 MHz (MIMO), 1710 – 2700 MHz (MIMO)

Remarks

Specifications



Polarisation ±45°

Gain 1)

698 – 9601710 – 2700

dBidBi

7.08.0

Isolation dB > 23

Azimuth beamwidth698 – 9601710 – 2700

°°

7565

Elevation beamwidth 698 – 9601710 – 2700

°°

7065

Impedance Ω 50

Maximum effective power 2) 698 – 960 MHz 1710 – 2700 MHz

WW

10050

VSWR 1)

698 – 960 MHz 1710 – 2700 MHz

< 2.0< 1.8





Mounting type wall mounted


mmmm

315 × 197 × 70435 × 210 × 85


ABSwhite


Pigtail mm ≈ 300







78712330 | Page 1 of 1


DP

x030

/b/0

218

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved

Ordering information 2-port indoor directional antenna: 78712330


2-Port Indoor Directional 698 – 960 MHz (MIMO), 1710 – 4000 MHz (MIMO)

Remarks

Specifications


Frequency range 1) MHz 698 – 864 870 – 960 1710 – 2700 3300 – 4000

Polarisation vertical/horizontal

Gain 1) dBi 6.5 6.5 8.5 7.5

Isolation dB 20

Azimuth beamwidth ° 80 80 65 45

Elevation beamwidth ° 70 70 60 35

Impedance Ω 50


VSWR ≤ 2.0 ≤ 2.0 ≤ 1.8 ≤ 2.0




Mounting type wall mounted


mmmm

315 × 195 × 68 435 × 210 × 85


ABSwhite


Pigtail mm ≈ 300

Net weight kg 0.65





Splitter

Tapper Electrical Accessories

Page

Type

Conn

ecto

r38

069

479

087

696

014

2516

9017

1025

0027

0034

0038

0040

0049

2051

5059

2060

0086

0100

172x

N86

0100

183x

N86

0100

194x

N86

0200

172x

4.3-

1086

0200

183x

4.3-

1086

0200

194x

4.3-

1078

7610

222x

N78

7610

323x

N78

7610

424x

N78

7620

232x

4.3-

1078

7620

333x

4.3-

1078

7620

434x

4.3-

10

8601

0136

7 dB

/ 1

dBN

8601

0137

10.4

dB

/ 0.4

dB

N86

0101

3815

.1 d

B / 0

.1 d

BN

8602

0136

7 dB

/ 1

dB4.

3-10

8602

0137

10.4

dB

/ 0.4

dB

4.3-

1086

0201

3815

.1 d

B / 0

.1 d

B4.

3-10

7876

1105

5 dB

N78

7611

066

dBN

7876

1108

8 dB

N78

7611

1010

dB

N78

7611

1313

dB

N78

7611

1515

dB

N78

7621

055

dB4.

3-10

7876

2106

6 dB

4.3-

1078

7621

088

dB4.

3-10

7876

2110

10 d

B4.

3-10

7876

2113

13 d

B4.

3-10

7876

2115

15 d

B4.

3-10

8601

0160

Adju

stab

leN

8602

0160

Adju

stab

le4.

3-10

Tapper/Directional Coupler

37 37 37 38 38 38 35 35 35 36 36 36 41 41 41 42 42 42 39 39 39 39 39 39 40 40 40 40 40 40 43 43


Splitter

Tapper Electrical Accessories

Page

Type

Conn

ecto

r38

069

479

087

696

014

2516

9017

1025

0027

0034

0038

0040

0049

2051

5059

2060

0086

0100

172x

N86

0100

183x

N86

0100

194x

N86

0200

172x

4.3-

1086

0200

183x

4.3-

1086

0200

194x

4.3-

1078

7610

222x

N78

7610

323x

N78

7610

424x

N78

7620

232x

4.3-

1078

7620

333x

4.3-

1078

7620

434x

4.3-

10

8601

0136

7 dB

/ 1

dBN

8601

0137

10.4

dB

/ 0.4

dB

N86

0101

3815

.1 d

B / 0

.1 d

BN

8602

0136

7 dB

/ 1

dB4.

3-10

8602

0137

10.4

dB

/ 0.4

dB

4.3-

1086

0201

3815

.1 d

B / 0

.1 d

B4.

3-10

7876

1105

5 dB

N78

7611

066

dBN

7876

1108

8 dB

N78

7611

1010

dB

N78

7611

1313

dB

N78

7611

1515

dB

N78

7621

055

dB4.

3-10

7876

2106

6 dB

4.3-

1078

7621

088

dB4.

3-10

7876

2110

10 d

B4.

3-10

7876

2113

13 d

B4.

3-10

7876

2115

15 d

B4.

3-10

8601

0160

Adju

stab

leN

8602

0160

Adju

stab

le4.

3-10

Tapper/Directional Coupler

37 37 37 38 38 38 35 35 35 36 36 36 41 41 41 42 42 42 39 39 39 39 39 39 40 40 40 40 40 40 43 43

78761022 2-way Power Splitter 698–2700 MHz, 300 W, N Connector78761032 3-way Power Splitter 698–2700 MHz, 300 W, N Connector78761042 4-way Power Splitter 698–2700 MHz, 300 W, N Connector

78761022, 78761032, 78761042 | Page 1 of 1


Px0

16/b

/041

8 | S

ubje

ct to

cha

nge

C

opyr

ight

© K

athr

ein

Solu

tions

Gm

bH 2

018

All r

ight

s re

serv

ed

Ordering information Power splitter: 78761022 (2-way) 78761032 (3-way) 78761042 (4-way)

Scope of delivery 1 × power splitter in carton 1 × bracket for wall mounting

Power Splitters 2-way, 3-way, 4-way698 – 2700 MHz

Remarks

For indoor and outdoor applications

Specifications 78761022 78761032 78761042

Frequency range MHz 698 – 2700

For connecting ... antennas 2 3 4

Insertion loss dB 3.3 4.8 6.4

Impedance Ω 50

VSWR ≤ 1.25

Intermodulation IM3 dBc ≤ −155 @ 2 × 43 dBm carrier

In-band ripple dB ±0.3 ±0.5 ±0.8

Max. power W 300

Temperature range °C −40 to +65

Connector N female

Net weight kg 0.5

SizeWithout connectors and brackets mm 197 × 25 × 25 233 × 25 × 25 235 × 25 × 25

Mounting wall mounted with bracket

Protection class IP65

25.0

60.4

216.8

78761022 (2-way)

25.0

270.6

60.4

78761032 (3-way)

25.0 42

.7

270.6

60.4

78761042 (4-way)



78762023 2-way Power Splitter 698–3800 MHz, 500 W, 4.3-10 Connector78762033 3-way Power Splitter 698–3800 MHz, 500 W, 4.3-10 Connector78762043 4-way Power Splitter 698–3800 MHz, 500 W, 4.3-10 Connector

78762023, 78762033, 78762043 | Page 1 of 1


Px0

26/b

/###

# | S

ubje

ct to

cha

nge

C

opyr

ight

© K

athr

ein

Solu

tions

Gm

bH 2

018

All r

ight

s re

serv

ed

Ordering information Power splitter: 78762023 (2-way)78762033 (3-way)78762043 (4-way)



Remarks


Specifi cations 78762023 78762033 78762043



Splitting loss dB 3.0 4.8 6.0

Impedance Ω 50

VSWR ≤ 1.25



Max. power W 500


Connector 4.3-10 female

Net weight kg 0.28 0.40 0.47

SizeWithout connectors and brackets mm

215 × 61 × 42

269 × 61 × 42

272 × 61 × 60




78762043

78762023, 78762033, 78762043 | Page 1 of 1


DP

x026

/b/#

###

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved




Remarks


Specifi cations 78762023 78762033 78762043




Impedance Ω 50

VSWR ≤ 1.25



Max. power W 500



Net weight kg 0.28 0.40 0.47


215 × 61 × 42

269 × 61 × 42

272 × 61 × 60




78762043



78762023, 78762033, 78762043 | Page 1 of 1


DP

x026

/b/#

###

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved




Remarks


Specifi cations 78762023 78762033 78762043




Impedance Ω 50

VSWR ≤ 1.25



Max. power W 500



Net weight kg 0.28 0.40 0.47


215 × 61 × 42

269 × 61 × 42

272 × 61 × 60




78762043

78762023, 78762033, 78762043 | Page 1 of 1


DP

x026

/b/#

###

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved




Remarks


Specifi cations 78762023 78762033 78762043




Impedance Ω 50

VSWR ≤ 1.25



Max. power W 500



Net weight kg 0.28 0.40 0.47


215 × 61 × 42

269 × 61 × 42

272 × 61 × 60




78762043

86010017 2-way Power Splitter 694–2700 MHz, 1000 W, N Connector86010018 3-way Power Splitter 694–2700 MHz, 1000 W, N Connector86010019 4-way Power Splitter 694–2700 MHz, 1000 W, N Connector


86010017, ... Page 1 of 1

936.

2248

/e

Sub

ject

to

alte

ratio

n.

For indoor use.

Low-loss Power SplittersMulti-band

694–2700

Input

86010019

2-way Splitter 694–27003-way Splitter 694–27004-way Splitter 694–2700

Type No. 86010017 86010018 86010019Frequency range MHz 694 – 2700For connecting ... antennas 2 3 4Insertion loss dB < 0.05Impedance Ω 50VSWR 694 – 894 MHz:

790 – 2500 MHz:2500 – 2700 MHz:

< 1.5< 1.25< 2.0

< 1.5< 1.25< 2.0

< 1.5< 1.3< 2.0

Intermodulation IM3 dBc < –150 (2 x 43 dBm carrier)Max. power W 100 (at 50 °C ambient temperature)Connector N femaleWeight kg

lb0.370.82

0.400.88

0.430.95

Profi le cross-section mminches

25 x 251.0 x 1.0


208 x 73 x 868.2 x 2.9 x 3.4

Max. size mminches

204 / 63 / 448.0 / 2.5 / 1.7

Material: Housing: Aluminum.Inner conductor: Brass.

DC capability: DC transmission between all terminations (suitbale for remote power supply systems).

Environmental conditions: IP 52





86020017, ... Page 1 of 1

936.

5126

/a

Sub

ject

to

alte

ratio

n.

For indoor and outdoor use.


694–3800


Type No. 86020017 86020018 86020019Frequency range MHz 694 – 3800For connecting ... antennas 2 3 4Insertion loss dB < 0.05Impedance Ω 50VSWR 694–2100 MHz

2100–2700 MHz2700–3800 MHz

< 1.3< 1.3< 1.5

< 1.3< 1.4< 1.5

< 1.3< 1.3< 1.6

Intermodulation IM3 dBc < –150 (2 x 43 dBm carrier)Max. power W 100 (at 50 °C ambient temperature)Connector 4.3-10 femaleWeight kg

lb0.420.93

0.450.99

0.481.06


25 x 251.0 x 1.0


248 x 73 x 869.8 x 2.9 x 3.4

Max. size mminches

237 / 66 / 469.3 / 2.6 / 1.8




Input

86020019





86020017, ... Page 1 of 1

936.

5126

/a

Sub

ject

to

alte

ratio

n.



694–3800


Type No. 86020017 86020018 86020019Frequency range MHz 694 – 3800For connecting ... antennas 2 3 4Insertion loss dB < 0.05Impedance Ω 50VSWR 694–2100 MHz

2100–2700 MHz2700–3800 MHz

< 1.3< 1.3< 1.5

< 1.3< 1.4< 1.5

< 1.3< 1.3< 1.6

Intermodulation IM3 dBc < –150 (2 x 43 dBm carrier)Max. power W 100 (at 50 °C ambient temperature)Connector 4.3-10 femaleWeight kg

lb0.420.93

0.450.99

0.481.06


25 x 251.0 x 1.0


248 x 73 x 869.8 x 2.9 x 3.4

Max. size mminches

237 / 66 / 469.3 / 2.6 / 1.8




Input

86020019


78761105 Directional Couplers 698–2700 MHz, 5 dB Coupling Loss, N Connector 78761106 Directional Couplers 698–2700 MHz, 6 dB Coupling Loss, N Connector 78761108 Directional Couplers 698–2700 MHz, 8 dB Coupling Loss, N Connector78761110 Directional Couplers 698–2700 MHz, 10 dB Coupling Loss, N Connector 78761113 Directional Couplers 698–2700 MHz, 13 dB Coupling Loss, N Connector 78761115 Directional Couplers 698–2700 MHz, 15 dB Coupling Loss, N Connector

78761105, 78761106, 78761108, 78761110, 78761113, 78761115 | Page 1 of 1


DP

x027

/b/0

418

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved

Ordering information Directional coupler: 78761105 (5 dB) 78761106 (6 dB) 78761108 (8 dB) 78761110 (10 dB) 78761113 (13 dB) 78761115 (15 dB)

Scope of delivery 1 × coupler in carton 1 × bracket for wall mounting

Directional Couplers 698 – 2700 MHz

Remarks


Specifications 78761105 78761106 78761108 78761110 78761113 78761115


Input ⇔ COP dB 5 6 8 10 13 15

Coupling bias dB ±0.3 ±0.3 ±0.3 ±0.3 ±0.6 ±0.6

Output ⇔ COP dB ≥ 25 ≥ 25 ≥ 25 ≥ 28 ≥ 33 ≥ 33

Input ⇔ output dB ≤ 1.6 ≤ 1.6 ≤ 1.6 ≤ 0.7 ≤ 0.5 ≤ 0.5

Impedance Ω 50

VSWR ≤ 1.2


Max. power W 300

Connector N female


Net weight kg 0.5

SizeWithout connectors and brackets

mm 43 × 121 × 21





78762105 Directional Couplers 698–3800 MHz, 5 dB Coupling Loss, 4.3-10 Connector78762106 Directional Couplers 698–3800 MHz, 6 dB Coupling Loss, 4.3-10 Connector78762108 Directional Couplers 698–3800 MHz, 8 dB Coupling Loss, 4.3-10 Connector78762110 Directional Couplers 698–3800 MHz, 10 dB Coupling Loss, 4.3-10 Connector78762113 Directional Couplers 698–3800 MHz, 13 dB Coupling Loss, 4.3-10 Connector78762115 Directional Couplers 698–3800 MHz, 15 dB Coupling Loss, 4.3-10 Connector

78762105, 78762106, 78762108, 78762110, 78762113, 78762115 | Page 1 of 1


DP

x028

/b/0

418

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved



Directional Couplers698 – 3800 MHz

Remarks


Specifications 78762105 78762106 78762108 78762110 78762113 78762115


Input ⇔ COP dB 5 6 8 10 13 15

Coupling bias dB ± 0.3 ± 0.3 ± 0.3 ± 0.3 ± 0.6 ± 0.6

Output ⇔ COP dB ≥ 25 ≥ 25 ≥ 25 ≥ 28 ≥ 33 ≥ 33

Input ⇔ output dB ≤ 1.6 ≤ 1.6 ≤ 1.6 ≤ 0.7 ≤ 0.5 ≤ 0.5

Impedance Ω 50

VSWR ≤ 1.2


Max. power W 500



Net weight kg 0.5


mm 43 × 121 × 21





78762105 Directional Couplers 698–3800 MHz, 5 dB Coupling Loss, 4.3-10 Connector78762106 Directional Couplers 698–3800 MHz, 6 dB Coupling Loss, 4.3-10 Connector78762108 Directional Couplers 698–3800 MHz, 8 dB Coupling Loss, 4.3-10 Connector78762110 Directional Couplers 698–3800 MHz, 10 dB Coupling Loss, 4.3-10 Connector78762113 Directional Couplers 698–3800 MHz, 13 dB Coupling Loss, 4.3-10 Connector78762115 Directional Couplers 698–3800 MHz, 15 dB Coupling Loss, 4.3-10 Connector

78762105, 78762106, 78762108, 78762110, 78762113, 78762115 | Page 1 of 1


DP

x028

/b/0

418

| Sub

ject

to c

hang

e

Cop

yrig

ht ©

Kat

hrei

n So

lutio

ns G

mbH

201

8 Al

l rig

hts

rese

rved



Directional Couplers698 – 3800 MHz

Remarks


Specifications 78762105 78762106 78762108 78762110 78762113 78762115


Input ⇔ COP dB 5 6 8 10 13 15

Coupling bias dB ± 0.3 ± 0.3 ± 0.3 ± 0.3 ± 0.6 ± 0.6

Output ⇔ COP dB ≥ 25 ≥ 25 ≥ 25 ≥ 28 ≥ 33 ≥ 33

Input ⇔ output dB ≤ 1.6 ≤ 1.6 ≤ 1.6 ≤ 0.7 ≤ 0.5 ≤ 0.5

Impedance Ω 50

VSWR ≤ 1.2


Max. power W 500



Net weight kg 0.5


mm 43 × 121 × 21




86010136 Power Tapper 694–2700 MHz, 7.0 /1.0 dB, N Connector86010137 Power Tapper 694–2700 MHz, 10.4/0.4 dB, N Connector86010138 Power Tapper 694–2700 MHz, 15.1/0.1 dB, N Connector

936.

3575

/b

Sub

ject

to a

ltera

tion.

860 10136, ... Page 1 of 1

860 10136 860 10137 860 10138

For indoor use

Type No.

Frequency range 694 – 2700 MHzTap LossInput ↔ P1 – 1.0 dB – 0.4 dB – 0.1 dBInput ↔ P2 – 7.0 dB – 10.4 dB – 15.1 dBFor connecting ... antennas 2Insertion loss < 0.05 dBImpedance 50 ΩVSWR 694 – 790 MHz: < 2.0

790 – 2500 MHz: < 1.52500 – 2700 MHz: < 2.0

Intermodulation IM3 < –150 dBc (2 x 43 dBm carrier)Max. power 100 W (at 50 °C ambient temperature)Connector N femaleWeight 500 gProfile cross-section 25 x 25 mmPacking size 267 x 95 x 111 mmMax. size 244 / 64 / 25 mm


DC capability: DC transmission only between input and port P1.P2 is coupled capacitively.

Environmental conditions: IP 52 Input860 10138

Multi-band Low-loss Power Tappers

2-way Tapper 694–2700 7.0 /1.0dB2-way Tapper 694–2700 10.4/0.4dB2-way Tapper 694–2700 15.1/0.1dB

P2

P1

694–2700



86020136 Power Tapper 694–2700 MHz, 7.0 /1.0 dB, 4.3-10 Connector86020137 Power Tapper 694–2700 MHz, 10.4/0.4 dB, 4.3-10 Connector86020138 Power Tapper 694–2700 MHz, 15.1/0.1 dB, 4.3-10 Connector


86020136, ... Page 1 of 1

936.

5133

/a

Sub

ject

to

alte

ratio

n.


Low-loss Power TappersMulti-band

694–2700


Type No. 86020136 86020137 86020138Frequency range MHz 694 – 2700 MHzTap LossInput ↔ P1Input ↔ P2

dB– 1.0– 7.0

– 0.4– 10.4

– 0.1– 15.1

For connecting ... antennas 2Insertion loss dB < 0.05Impedance Ω 50VSWR 694 – 790 MHz: < 2.0

790 – 2500 MHz: < 1.52500 – 2700 MHz: < 2.0

Intermodulation IM3 dBc < –150 (2 x 43 dBm carrier)Max. power W 100 (at 50 °C ambient temperature)Connectors 4.3-10 femaleWeight g

lb5001.1


25 x 251.0 x 1.0


253 x 73 x 9210.0 x 2.9 x 3.6

Max. size mminches

247 / 66 / 259.7 / 2.6 / 1.0




P2

P1

Input

86020138



86020136 Power Tapper 694–2700 MHz, 7.0 /1.0 dB, 4.3-10 Connector86020137 Power Tapper 694–2700 MHz, 10.4/0.4 dB, 4.3-10 Connector86020138 Power Tapper 694–2700 MHz, 15.1/0.1 dB, 4.3-10 Connector


86020136, ... Page 1 of 1

936.

5133

/a

Sub

ject

to

alte

ratio

n.


Low-loss Power TappersMulti-band

694–2700


Type No. 86020136 86020137 86020138Frequency range MHz 694 – 2700 MHzTap LossInput ↔ P1Input ↔ P2

dB– 1.0– 7.0

– 0.4– 10.4

– 0.1– 15.1

For connecting ... antennas 2Insertion loss dB < 0.05Impedance Ω 50VSWR 694 – 790 MHz: < 2.0

790 – 2500 MHz: < 1.52500 – 2700 MHz: < 2.0

Intermodulation IM3 dBc < –150 (2 x 43 dBm carrier)Max. power W 100 (at 50 °C ambient temperature)Connectors 4.3-10 femaleWeight g

lb5001.1


25 x 251.0 x 1.0


253 x 73 x 9210.0 x 2.9 x 3.6

Max. size mminches

247 / 66 / 259.7 / 2.6 / 1.0




P2

P1

Input

86020138


86010160 Power Tapper 380–960/1695–2700/3400–3800/4920–5920 MHz, Continuously Adjustable Splitting Ratio, N Connector

86020160 Power Tapper 380–960/1695–2700/3400–3800/4920–5920 MHz, Continuously Adjustable Splitting Ratio, 4.3-10 Connector

936X

024/

a

Sub

ject

to

alte

ratio

n.

Multi-band Low-loss Power TapperContinuously Adjustable Splitting Ratio

380–960 / 1695–2700 / 3400–3800 / 4920–5920

5.0 dB – 20.0 dB

Input

P2

P1

Blocking unit

Power ratio scale(P2/P1)

Power ratio adjustment mechanism

Splitting table (typical values)

P2 / P1 [dB]Splitting ratio

P1 / P2

Splitting attenuationP1 / PInput [dB] P2 / PInput [dB]

–5 3.2 –1.3 –6.3 –6 4 –1.05 –7.05 –7 5 –0.85 –7.85 –8 6.3 –0.7 –8.7 –9 8 –0.6 –9.6–10 10 –0.5 –10.5–11 12.6 –0.4 –11.4–12 15.8 –0.35 –12.35–13 20 –0.25 –13.25–14 25.1 –0.2 –14.2–15 31.6 –0.15 –15.15–16 39.8 –0.14 –16.14–17 50.1 –0.12 –17.12–18 63.1 –0.11 –18.11–19 79.4 –0.1 –19.1–20 100.0 –0.09 –20.09

2-way Tapper 380–960/1695–2700/3400–3800/4920–5920


Type No. 86010160 86020160Frequency range MHz 380 – 960

1695 – 27003400 – 38004920 – 5920

Power ratio between outputs (P2 / P1)

dB –5 to –20continuously adjustable

For connecting ... antennas 2Insertion loss dB 380 – 960 MHz: < 0.2

1695 – 2700 MHz: < 0.23400 – 3800 MHz: < 0.54920 – 5920 MHz: < 0.7


1695 – 2700 MHz: < 1.53400 – 3800 MHz: < 1.74920 – 5920 MHz: < 1.7

Intermodulation IM3 dBc 380 – 960 MHz: < –150 ( 2 x 43 dBm carrier)1695 – 2700 MHz: < –150 ( 2 x 43 dBm carrier)3400 – 3800 MHz: < –150 ( 2 x 43 dBm carrier)4920 – 5920 MHz: not relevant

Max. power W 100 (at 50 °C ambient temperature)Connector N female 4.3-10Weight kg

lb0.40.9

Environmental conditions Indoor, outdoor useProtection class IP 65Profile diameter mm

inches502.0


190 x 80 x 607.5 x 5.0 x 2.4

225 x 80 x 628.9 x 5.0 x 2.4

Max. size (including connectors)

mminches

160 / 70 / 556.3 / 2.8 / 2.2

160 / 63 / 526.3 / 2.5 / 2.0

Material: Housing: Aluminium.Inner conductor: Brass.

DC capability: DC transmission only between input and port P1.

Any previous data sheet issues have now become invalid.KATHREIN-Werke KG | Anton-Kathrein-Straße 1–3 | 83022 Rosenheim, Germany | Phone +49 8031 184-0 | www.kathrein.com | [email protected]

86010160 86020160 Page 1 of 1

KATHREIN Solutions GmbHAnton-Kathrein-Straße 1 – 383004 Rosenheim, GermanyPhone +49 8031 184-0 www.kathrein.com | [email protected]

998X

001/

a/04

18 |

Subje

ct to

chan

ge

Co

pyrig

ht ©

Kath

rein S

olutio

ns G

mbH

201

8 All

right

s res

erve

d

Title:

isto

ck.co

m |

derrr

ek

in-building wireless solutions - tinex group...

Documents