SAVING LIVESBuilt for Integrators, AHJs, and Building Owners

Get a Faster Certificate Occupancy with the Most Advanced Public Safety ERRCS Solution Available

In-building Public Safety

Performance Leadership

Ease of Install

Leaders in Value

Fastest Project Timeline

Code Compliant

• Class A with 56 Channels• Class B with 26 Channels• 700/800 MHz for Public

Safety with dedicated FirstNet

• Automatic calculation and set of isolation

• Automatic Uplink / Downlink calculation

• Talk-out Guarantee• Scalable All-Digital

PoE / RFoE• Built-in Remote Monitoring

brief_quatra-red_20-0824

Which public safety configuration do you need for your building?

cel-fi.comU.S. Headquarters: Nextivity Inc.16550 West Bernardo Drive, Bldg. 5, Suite 550, San Diego, CA 92127, USA+1 858.485.9442 tel • +1 858.485.9445 fax

Cel-Fi QUATRA RED — BDA Configuration (up to 400,000 sq. ft.)A single Cel-Fi QUATRA RED Coverage Unit supplies 1W per band, with one RF output that delivers combined FirstNet and LMR signals. Two CUs can be attached to a single NU for a 1W or 2W configuration powered by the small version of the MBBU that supports 12 or 24 hours back up requirements.

Cel-Fi QUATRA RED — DAS Configuration (up to 1.2 Million sq. ft.)In this configuration the CUs can be installed right where the coverage is needed with virtually zero cable loss thanks to the power and RF over Ethernet capabilities in Cel-Fi QUATRA RED. No additional battery backup power is required at the remote location, drastically reducing time and cost of installation. Each Network Unit (NU) is capable of scaling up to 6-Watts by adding 6 Cel-Fi QUATRA RED Coverage Units (CU) to the NU.

Cel-Fi QUATRA RED — Campus Configuration (up to 3 Million sq. ft.)By using fiber to connect Cel-Fi QUATRA RED Network Units (NU) it is possible to configure this system to cover an entire campus. Expand your configuration with a scalable, (up to 12-Watt) solution by adding a Cel-Fi Fiber Hub to connect building to building. 

Cel-Fi QUATRA RED — Cellular & Public Safety ConfigurationDuring emergency situations it is critical to have working Public Safety Communications as well as reliable in-building cellular coverage. Combining Cel-Fi QUATRA RED and Cel-Fi QUATRA systems in one building ensure you have both critical communication systems covered.

Sometimes Public Safety ERRCS solutions are not one-size-fits-all. Determining factors like regulations and building size play a huge role as to which solution is the best fit. At Cel-Fi we have created a scalable, all-in-one system to be adaptable and accommodate all your needs.

Network Unit (NU): Supports 700/800 LMR + First-Net bands 14, 12, 4 and 2. Up to six CUs can be attached to a sin-gle NU. Dedicated donor ports for LMR and LTE. Class A and Class B versions available.

Coverage Unit (CU): 1 watt output power for each LMR band. Class A device with 56 channels and Class B unit with 28 bandwitdh variable filters for both 700 & 800 bands. PoE ready. N type port to distribute RF signals.

Emergency Power Off (EPO): Shuts-off the radio sys-tem in case risk of explo-sion or interference with the network.

Monitoring & Battery Backup Unit (MBBU):Supports 12hrs or 24hrs battery back up configu-rations. Front panel alarm, with LTE modem built-in. Two sizes for small and large configurations.

Remote Annunciator (RA): Supports 12hrs or 24hrs battery backup configurations. Front pan-el alarm, with LTE modem built-in. Three sizes for small, large and extra large configurations.

CLASS A: F42-67ENUCLASS B: F42-67ENUB

F42-10E-100

F42-10S-100F42-10L-100F42-10X-100

CLASS A: F41-8XCUCLASS B: F41-8XCUB

F42-10R-100

Code Complaiant

• IFC 510• NFPA 1221 • UL 2524

Scalable All-in-One Solution Elements: