implementing wi-fi ross goodrum mary herbert david nguyen
TRANSCRIPT
Implementing Wi-Fi
Ross GoodrumMary HerbertDavid Nguyen
THE STEPS
Performing Site Survey
Installing the Client
Setting up the Networks
Extending the Network
Verify Installation
Performing Site Survey
Pre-Existing Wireless Devices• Radio bands used• Avoid overlapping Networks
Interference Sources• Document or sketch-out site survey• Identify deadspots
RefrigeratorsReinforced wallsMetal plumbing
Microwaves
Installing the Client
• Install NIC• Attach antenna• Install any necessary drivers and software
PCI NIC
• First, install drivers and software • Connect NIC to computer
USB NIC
Setting Up Ad Hoc Network
SSID IP addresses Channel Sharing
Setting up an Infrastructure Network
- Omnidirectional and Centered- Dipole Antennas- Reasons not used
- Signal bleed- Security- Glaring dead
spots
Placing the Access Point- Gaining Gain
- Decibals (dB)- Bigger
Antenna- Focusing the
Wave- Directional
Antenna
Setting up an Infrastructure Network
Browser-based setup utility192.168.1.1
Configuring the Access Point
Setting up an Infrastructure Network
Unique
Configuring the SSID (ESSID) and Beacon
Setting up an Infrastructure Network
Configuring MAC Address Filtering
Setting up an Infrastructure Network
Configuring Encryption
Setting up an Infrastructure Network
Overlapping Signals
Dual Band 802.11n
Configuring Channel/Frequency
Setting up an Infrastructure NetworkConfiguring the Client
Broadcasting
Extending the Network
Extending the Network
Point-to-Point
Point-to-Multipoint
Next…TEST IT!!!!