ilumien ™ pci optimization system how to use in ffr and oct procedures

17
ILUMIEN PCI Optimization System How to Use in FFR and OCT Procedures

Upload: fabiola-coupland

Post on 15-Dec-2015

221 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

ILUMIEN™ PCI Optimization SystemHow to Use in FFR and OCT Procedures

Page 2: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure

ILUMIEN™ PCI Optimization System

Page 3: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – Select Cath Lab Room

3

Page 4: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

Equipment for FFR Calculation

4

PressureWire™ Aeris™ Hyperemia

Page 5: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

Hyperemia Hyperemia is a pre-requisite for FFR.

A high volume infusion pump is required for IV administration of hyperemic drugs

5

140

Page 6: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – Calibrate Aortic Pressure

6

Page 7: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – Prepare PressureWire™ Aeris™

Remove the pouch from the box Remove PressureWire™ Aeris™

Place the tray flat Follow printed illustrations

on the tray to prepare PressureWire Aeris for use

7

Page 8: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – Prepare PressureWire™ Aeris™

Flush coil with saline

Fill coil with saline; take care not to expose PressureWire transmitter to fluids.

Loosen torque device

Make sure to pull torque device forward along the wire; do not bend it loose.

8

Page 9: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – Prepare PressureWire AerisOpen holding flaps

Carefully tear open the flaps holding PressureWire transmitter to the tray.

Remove PressureWire transmitter

Lift PressureWire transmitter up and place it on the bed next to the tray without removing the wire from coil. Make sure PressureWire is fully inserted into PressureWire transmitter.

9

Page 10: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – Calibrate PressureWire

10

Page 11: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – Turn on the PressureWire transmitter

11

Page 12: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – Equalize

12

Page 13: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – Equalize

13

Page 14: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – Start a Recording

14

Page 15: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

New Image, New Wave form AO higher than PW

FFR Procedure – Recording

15

Page 16: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

FFR Procedure – View Recorded Sequence

16

Page 17: ILUMIEN ™ PCI Optimization System How to Use in FFR and OCT Procedures

Rx Only

Please review the Instructions for Use prior to using these devices for a complete listing of indications, contraindications, warnings, precautions, potential adverse events and directions for use.

ILUMIEN, PressureWire, RadiAnalyzer, Dragonfly, C7-XR, GOLDEN IMAGE, the color Gold, LIGHTLAB, Wi-Box, ST. JUDE MEDICAL, the nine-squares symbol and MORE CONTROL. LESS RISK. are registered and unregistered trademarks and service marks of St. Jude Medical, Inc. and its related companies. ©2011 St. Jude Medical, Inc. All rights reserved

IPN 1681-11

17