illustrated tool and equipment - hartzell...

Illustrated

Tool and EquipmentManual

Hartzell Propeller Inc.One Propeller PlacePiqua, Ohio 45356-2634 U.S.A.Phone: 937.778.4200Fax: 937.778.4391

Manual No. 165ARevision 1661-00-65April 2014

COVER 61-00-65 Rev. 16 Apr/14

TOOL AND EQUIPMENT MANUAL165A

© 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2011, 2012, 2013, 2014 - Hartzell Propeller Inc. - All rights reserved


REVISION HIGHLIGHTS 61-00-65 Page 1Rev. 16 Apr/14

REVISION 16 HIGHLIGHTS

• COVER

• Revised to match the manual revision

• REVISION HIGHLIGHTS: • Revised to match the manual revision

• LIST OF EFFECTIVE PAGES: • Revised to match the manual revision

• TOOL AND EQUIPMENT INDEX: • Revised to match the manual revision

• TOOL AND EQUIPMENT LIST:

• Added DST-10024-1, Bolt Alignment Tool Illustration

• Revised TE355, Milliohmmeter name

• Incorporated TR-014 that revised TE536, Hub Flange Spindle and added TE548, Bantam Spring Compressor

• Added TE547, Valve Assembly Check Tool

• Added TE549, Fit Check Tool



REVISION 16 HIGHLIGHTS

1. Introduction

A. General

(1) This is a list of current revisions that have been issued against this manual. Please compare to RECORD OF REVISIONS page to ensure that all revisions have been added to the manual.

B. Components

(1) Revision No. indicates the revisions incorporated in this manual.

(2) Issue Date is the date of revision.

(3) Comments indicates the level of the revision.

(a) New Issue is a new manual distribution. The manual is distributed in its entirety. All the revision dates are the same and no change bars are used.

(b) Reissue is a revision to an existing manual that includes major content and/or major format changes. The manual is distributed in its entirety. All the revision dates are the same and no change bars are used.

(c) Major Revision is a revision to an existing manual that includes major content or minor format changes over a large portion of the manual. The manual is distributed in its entirety. All the revision dates are the same, but change bars are used to indicate the changes incorporated in the latest revision of the manual.



(d) Minor Revision is a revision to an existing manual that includes minor content changes to the manual. Only the revised pages of the manual are distributed. Each page retains the date and the change bars associated with the last revision to that page.

Revision No. Issue Date Comments

Original Nov/95 Total rewrite Revision 1 Aug/96 Minor Revision Revision 2 May/98 Minor Revision Revision 3 Jan/99 Minor Revision Revision 4 Oct/99 Minor Revision Revision 5 Apr/00 Minor Revision Revision 6 May/01 Minor Revision Revision 7 Aug/01 Minor Revision Revision 8 Mar/02 Minor Revision Revision 9 Jun/02 Minor Revision Revision 10 Sep/03 Minor Revision Revision 11 Aug/04 Minor Revision Revision 12 Aug/11 Major Revision Revision 13 Jul/12 Minor Revision Revision 14 Jun/13 Minor Revision Revision 15 Dec/13 Minor Revision Revision 16 Apr/14 Minor Revision



(This page is intentionally blank.)

RECORD OF REVISIONS

This is a permanent historical record of revisions inserted into this manual. Revision 12 includes all prior revisions, up to and including Revision 11.

TOOL AND EQUIPMENT MANUAL 165A

RECORD OF REVISIONSPage 1

Rev. 12 Aug/1161-00-65

Revision Number

Issue Date

Date Inserted

Inserted By

12 Aug/11 Aug/11 HPI

13 Jul/12 Jul/12 HPI

14 Jun/13 Jun/13 HPI

15 Dec/13 Dec/13 HPI

16 Apr/14 Apr/14 HPI

Revision Number

Issue Date

Date Inserted

Inserted By


Page 2Rev. 12 Aug/1161-00-65RECORD OF REVISIONS

RECORD OF REVISIONS

This is a permanent historical record of revisions inserted into this manual. Revision 12 includes all prior revisions, up to and including Revision 11.

Revision Number

Issue Date

Date Inserted

Inserted By

Revision Number

Issue Date

Date Inserted

Inserted By

RECORD OF TEMPORARY REVISIONS

Update this page to show all temporary revisions inserted into this manual. Revision 12 includes all prior temporary revisions, up to and including TR-008.


Page 1Rev. 12 Aug/1161-00-65RECORD OF TEMPORARY REVISIONS

TemporaryRevision No.

Section/Page

IssueDate

DateInserted

InsertedBy

DateRemoved

RemovedBy

TR-009 4-43 Oct/11 Oct/11 HPI Jul/12 HPI

TR-010 4-14 Nov/11 Nov/11 HPI Jul/12 HPI

TR-011 4-65 May/12 May/12 HPI Jul/12 HPI

TR-012 4-136 Oct/12 Oct/12 HPI Jun/13 HPI

TR-013 4-144 Sep/13 Sep/13 HPI Dec/13 HPI

TR-014 4-149 Mar/14 Mar/14 HPI Apr/14 HPI

RECORD OF TEMPORARY REVISIONS

Update this page to show all temporary revisions inserted into this manual. Revision 12 includes all prior temporary revisions, up to and including TR-008.


Page 2Rev. 12 Aug/1161-00-65RECORD OF TEMPORARY REVISIONS

TemporaryRevision No.

Section/Page

IssueDate

DateInserted

InsertedBy

DateRemoved

RemovedBy

LIST OF EFFECTIVE PAGES


Page 1Rev. 16 Apr/1461-00-65

Cover/Cover Back Cover/Inside Cover Rev. 16 Apr/14

Revision Highlights 1 thru 4 Rev. 16 Apr/14

Record of Revisions 1 and 2 Rev. 12 Aug/11

Record of Temporary Revisions 1 and 2 Rev. 12 Aug/11

List of Effective Pages 1 thru 4 Rev. 16 Apr/14

Table of Contents 1 and 2 Rev. 15 Dec/13

Introduction 1 and 2 Rev. 15 Dec/13

Introduction 3 thru 6 Rev. 13 Jul/12

Introduction 7 and 8 Rev. 15 Dec/13

Numerical Index 1-1 and 1-2 Rev. 12 Aug/11

Tool and Equipment Index 2-1 Rev. 15 Dec/13

Tool and Equipment Index 2-2 thru 2-4 Rev. 12 Aug/11

Tool and Equipment Index 2-5 Rev. 14 Jun/13

Tool and Equipment Index 2-6 and 2-7 Rev. 12 Aug/11

Tool and Equipment Index 2-8 Rev. 15 Dec/13

Tool and Equipment Index 2-9 Rev. 12 Aug/11

Tool and Equipment Index 2-10 Rev. 16 Apr/14

Tool and Equipment Index 2-11 thru 2-16 Rev. 15 Dec/13

Tool and Equipment Index 2-17 and 2-18 Rev. 16 Apr/14

Alphabetical Index 3-1 and 3-2 Rev. 12 Aug/11

Tool and Equipment List 4-1 thru 4-6 Rev. 12 Aug/11

Tool and Equipment List 4-7 Rev. 14 Jun/13

Tool and Equipment List 4-8 and 4-9 Rev. 12 Aug/11

Tool and Equipment List 4-10 Rev. 15 Dec/13

Tool and Equipment List 4-11 Rev. 12 Aug/11

Tool and Equipment List 4-12 and 4-13 Rev. 15 Dec/13

Tool and Equipment List 4-14 and 4-15 Rev. 13 Jul/12



Tool and Equipment List 4-25 Rev. 12 Aug/11


Chapter Page Revision Level Date



Page 2Rev. 16 Apr/1461-00-65







Tool and Equipment List 4-39 Rev. 16 Apr/14



Tool and Equipment List 4-43 Rev. 13 Jul/12














Tool and Equipment List 4-85 thru 4-87 Rev. 15 Dec/13











Page 3Rev. 16 Apr/1461-00-65
















Tool and Equipment List 4-134 thru 4-136 Rev. 13 Jul/12

Tool and Equipment List 4-137 thru 4-143 Rev. 14 Jun/13




Tool and Equipment List 4-151 and 4-152 Rev. 16 Apr/14



Page 4Rev. 16 Apr/1461-00-65



TABLE OF CONTENTS 61-00-65 Page 1Rev. 15 Dec/13

TABLE OF CONTENTS

Page

REVISION HIGHLIGHTS .................................................................................................1RECORD OF REVISIONS ...............................................................................................1RECORD OF TEMPORARY REVISIONS ........................................................................1LIST OF EFFECTIVE PAGES ..........................................................................................1TABLE OF CONTENTS ....................................................................................................1INTRODUCTION ..............................................................................................................1

1. Using the Illustrated Tool and Equipment Manual .................................................3

A. General.............................................................................................................3

B. Vendor ..............................................................................................................4

C. Page .................................................................................................................8

2. Using the “TE” Reference Number ........................................................................8

3. Ordering Parts .......................................................................................................8

NUMERICAL INDEX .....................................................................................................1-1TOOL AND EQUIPMENT INDEX ..................................................................................2-1ALPHABETICAL INDEX ................................................................................................3-1TOOL AND EQUIPMENT LIST ......................................................................................4-1


TABLE OF CONTENTS 61-00-65 Page 2Rev. 15 Dec/13



Page 1Rev. 15 Dec/13

INTRODUCTION 61-00-65

INTRODUCTION - CONTENTS

1. Using the Illustrated Tool and Equipment Manual .................................................3

A. General.............................................................................................................3

B. Vendor ..............................................................................................................4

C. Page .................................................................................................................8

2. Using the “TE” Reference Number ........................................................................8

3. Ordering Parts .......................................................................................................8


INTRODUCTION 61-00-65 Page 3Rev. 13 Jul/12

INTRODUCTION

1. Using the Illustrated Tool and Equipment Manual

A. General

(1) This manual contains the tooling and equipment required to perform standard procedures in accordance with Hartzell Propeller Inc. manuals.

(2) In addition to an illustration of each item, the following information is provided:

(a) The title or description

(b) The part number

1 The part number listed should be used when ordering the item from Hartzell Propeller Inc. or a Hartzell Propeller Inc. approved distributor.

(c) The TE number

1 The number given to the tool that is used to reference the tool in Hartzell Propeller Inc. publications.

(d) A description of the item, including:

1 Its uses and other related items needed to perform the task

2 A breakdown of subcomponents, as necessary

3 Information required to fabricate the item, if applicable

4 Additional vendors where the item may be purchased, as necessary.

(3) Some of the parts may be purchased through Hartzell Propeller Inc. Refer to the specific tool for information about the Hartzell Propeller Inc. part number.

(4) Tool and Equipment Index

(a) The Tool and Equipment Index of this Tool and Equipment Manual is a list of the tools by TE number that are included in this manual and the page number on which the tool illustration and information may be found.

1 For a tool that shows more than one page number in the index, generally the first page number is where the most comprehensive information about the tool may be found. The additional page numbers given are other places in the manual where the tool is referenced.

(b) The Tool and Equipment Index of this Tool and Equipment Manual uses a number of abbreviations. Refer to the sections "Vendor" and "Application" in this chapter for a list of the abbreviations used.



B. Vendor

The vendor is the point of purchase of the item for the end user:AE All Phase Electric Supply Co........ ....Direct from the Vendor. 1620 W. Main St. Springfield, OH 45501 Tele: 800.736.7555

AL ALATEC Products Corp ....................Direct from the Vendor. 12109 Bridgeton Square Drive Brigton, MO 63044

AP APEX Products .................................From any Distributor. Division of Cooper Tools P.O. Box 952 Dayton, OH 45401

AR Associated Research ........................From any Distributor. 905 Carriage Park Avenue Lake Bluff, IL 60044 Tele: 800.858.8378

BD ..........................................................Contact any Bearing Distributor.

BH Bondhus ............................................From any Distributor. 1400 East Broadway Monocello, MN 55362

BK BK Precision .....................................Direct from the Vendor. 3033 South Kettering Blvd. Dayton, OH 45439-1948 Tele: 937.294.8980 Fax: 937.294.2517

BN Branson Ultrasonics Corporation ......Direct from the Vendor. 41 Eagle Road Danbury, CT 06813-1961 Tele: 800.732.9262 Fax: 203.796.2240

BR BriskHeat Corporation .......................Direct from the Vendor or Hartzell Propeller Inc. P.O. Box 163309 Columbus, OH 43216-3309 Tele: 800.848.7673

CG Clay-Groomer Machine Shop, Inc .....Direct from the Vendor or Hartzell Propeller Inc. 701 S. Carlton Ave. Farmington, NM 87401 Tele: 505.327.7751



CL Clemco Industries Corp. ...................Direct from the Vendor. One Cable Car Drive Washington, MO 63090 Tele: 636.239.8172

CP Cole Palmer ......................................Direct from the Vendor or Distributor. 7425 N. Oak Park Avenue Chicago, IL 60648

CS Customer Supplied ...........................Locally fabricated by the end user. Information required to purchase or fabricate the unit will be found in the description.

DM Daniels Manufacturing Corp. ............Direct from the Vendor or Distributor. 526 Thorpe Road Orlando, FL 32824-8133

EP Everhard Products ............................Direct from the Vendor. 1016 Ninth Street, SW Canton, OH 44707 Tele: 216.453.7786

GO George Olcott Co. .............................Direct from the Vendor. P.O. 783 Scottsboro, AL 35768 Tele: 256.259.4937 Fax: 256.259.4942

HE Heli-Coil Division ...............................Direct from the Vendor. Emhart Fastening Systems Group Shelter Rock Lane Danbury, CT 06810 Tele: 203.743.7651 Fax: 203.798.2540

HM Hemco Corp ......................................Direct from the Vendor. 455 Douglas Avenue Holland, MI 49424 Tele: 616.396.4604

HP Hartzell Propeller Inc. ........................Any Hartzell Propeller Inc. approved Distributor.

HK Hocking NDT Ltd ...............................Direct from the Vendor. 50 Industrial Park Road Lewistown, PA 17044 Tele: 717.242.0320 Fax: 717.242.4170

JC Jay Instrument and Spec Co. ............Direct from the Vendor. 555 North Wayne Avenue Cincinnati, Ohio 45215



KE Keithley Instruments, Inc. ..................Direct from the Vendor. 28775 Aurora Road Solon, OH 44139 Tele: 800.348.3735 Fax: 440.498.2980

LC Leschen Wire Rope ..........................From any Distributor. St. Joseph, MO 64502

LE Lee Valve Company ..........................Direct from the Vendor. 9701 W. Higgins Road Suite 380 Rosemont, IL 60018

MC McMaster-Carr Supply Co. ...............Direct from the Vendor. P.O. Box 4355 Chicago, IL 60680

MF Magnaflux Corp. ................................Direct from the Vendor. 7300 W. Lawrence Avenue Chicago, IL 60656

MH Mahr Federal Inc. ..............................Either through the Hartzell Propeller Inc. 1144 Eddy Street distributor network, or it may be purchased P.O. Box 9400 directly from the vendor. Providence, RI Tele: 401.784.3100 Fax: 401.784.3246

MS Mausner Equipment Company, Inc. ..Direct from the Vendor. 651 Pierce Place East Meadow, NY 11554 Tele: 516.481.1600

MT Mitutoyo America Corporation ...........Direct from the Vendor. 965 Corporate Blvd. Aurora, IL 60504 Tele: 630.820.9666 Fax: 630.820.2614 E-mail: [email protected]

OL Olympus NDT Inc. ............................Direct from the Vendor 9 Woerd Ave. Waltham MA, USA www.olympus-ims.com Tele: 1-800-225-8330

PM Panametrics, Inc. ..............................Direct from the Vendor. 221 Crescent Street Waltham, MA 02154




RC Related Components Inc. .................From any Distributor. 3186 Plainfield Road Dayton, OH 45432 Tele: 937.253.6116

SA Steinel America .................................Direct from the Vendor. 9051 Lyndale Ave., South Bloomington, MN 55420 Tele: 612.888.5950

SO Snap-On Tools Corp. ........................Either through the Hartzell Propeller Inc. P.O. Box 14003 distributor network, or it may be purchased Fairfield, OH 45014 directly from the vendor.

ST Starrett Tool Co. ................................Direct from the Vendor or Distributor. Athol, MA 01331

VK Van Keuren .......................................Direct from the Vendor. 107 SCT Drive White House, TN 37188 Tele: 847.439.9220

VR VWR Scientific ..................................Direct from the Vendor. P.O. Box 66929 Chicago, IL 60666

WI Wahl Instruments, Inc. ......................Direct from the Vendor. 5750-A Hannum Ave. Culver City, CA 90231 Tele: 800.344.9245

WH White Hawk Machine & Tool .............Direct from the Vendor. 6008 Highway 66 Greenville, TX 75402 Tele: 903.450.1060




C. Page

(1) The item is located on the page number listed in the Page column.

2. Using the “TE” Reference Number

A. In other Hartzell Propeller Inc. publications, tooling references appear with the prefix “TE” directly following the tool name to which they apply.

(1) For example, a template which is reference number 133 will appear as: template TE133.

3. Ordering Parts

A. When ordering vendor tooling from the vendor or a distributor, use the number as specified in the manual.

B. For some vendor tooling there is an associated Hartzell Propeller Inc. part number. This part number may be used when ordering the tooling direct from Hartzell Propeller Inc.


NUMBERICAL INDEX 61-00-65 Page 1-1Rev. 12 Aug/11

The Numerical Index has been replaced by the Tool and Equipment Index. Refer to the Tool and Equipment Index in this manual.


NUMERICAL INDEX 61-00-65 Page 1-2Rev. 12 Aug/11



TOOL AND EQUIPMENT INDEX 61-00-65 Page 2-1Rev. 15 Dec/13

TE NUMBER PART NUMBER DESCRIPTION VENDOR PAGE

TE1 BST-2912-8 Adaptor HP OBSTE2 BST-2912-9 Adaptor HP 4-26,4-99TE3 BST-3035 Adaptor HP 4-47,4-92TE4 BST-2912-4 Adaptor Ring HP 4-26,4-99TE5 AST-2877 Torque Wrench Adaptor HP 4-6TE6 BST-2837 Torque Wrench Adaptor HP 4-19TE7 BST-10008 PCU Tester - Obsolete OBSTE8 CST-2919 Balance Arbor CS 4-87TE9 BST-2853 Assembly Tool HP 4-2,4-8TE10 CST-3021 Dual Acting Propeller Assembly Bench HP 4-91TE11 BST-2823 Spinner Mounting Plate Bender CS 4-17

TE12 CT-1311 Shot Peen Cabinet CS 4-64,4-65, 4-126

TE13 BST-2942 Shank Protection Cap HP 4-31TE14 BST-2943 Shank Protection Cap HP 4-31TE15 BST-2944 Shank Protection Cap HP 4-31TE16 BST-2945 Shank Protection Cap HP 4-31TE17 AST-2803 Ring Centering Tool HP 4-2TE18 CST-2923 Optical Comparator Overlay HP 4-88TE19 CST-2924 Optical Comparator Overlay HP 4-88TE20 CST-2925 Optical Comparator Overlay HP 4-88TE21 CST-2926 Optical Comparator Overlay HP 4-88TE22 CST-2989 Optical Comparator Overlay HP 4-88TE23 DST-10014 Synchrophaser Check Box HP 4-101TE24 CST-2800 Blade Retention Components Clamp CS 4-83TE25 CST-2929 Blade Retention Components Clamp CS 4-88TE26 BST-3038 Control Rod Alignment Tool HP 4-48,4-92TE27 AST-2870 Hub Bearing Radius Comparator HP 4-5TE28 CUST. P/N Optical Comparator CS 4-110TE29 AT-725-1 Spring Compressor HP 4-9TE30 BST-2826 Spring Compressor Assembly HP 4-18TE31 BST-2826-1 Spring Compressor Assembly HP 4-19TE32 CST-3016 Portable Spring Compressor HP 4-91,4-85TE33 SCO38 Crowfoot 1 3/16 inch SO 4-113TE34 SC040 Crowfoot 1 1/4 inch SO 4-113TE35 SC042 Crowfoot 1 5/16 inch SO 4-113TE36 SC048 Crowfoot 1 1/2 inch SO 4-113TE37 SC052 Crowfoot 1 5/8 inch SO 4-113TE38 SC056 Crowfoot 1 3/4 inch SO 4-113TE39 SC060 Crowfoot 1 7/8 inch SO 4-113TE40 BST-3027 Modified Crowfoot HP 4-44,4-92TE41 BST-3030 Modified Crowfoot HP 4-45,4-92


TOOL AND EQUIPMENT INDEX 61-00-65 Page 2-2Rev. 12 Aug/11


TE42 BST-3031 Modified Crowfoot HP 4-45,4-92TE43 BST-3033 Modified Crowfoot HP 4-46,4-92TE44 170-1/4 Apex Torqset Bit AP 4-113TE45 n/a n/a n/a n/aTE46 BST-3060-1 Screw Driver HP 4-55TE47 YA484 Tool Box SO 4-93TE48 CT-1075 Adjustable Riser Fixture HP 4-95TE49 BT-1312 Almen Strip Fixture HP 4-65,4-95TE50 BST-5845 Chamfering Tool HP 4-58TE51 BST-2920 Drill Fixture HP 4-27TE52 CST-2913 Pilot Tube Press Fixture HP 4-84,4-57TE53 DT-336 Pilot Tube Removal Fixture HP 4-102,4-21TE53-1 DT-336+6 Jaw HP 4-102TE53-2 DT-336+7 Jaw HP 4-102TE54 BST-2892 Piston Fixture HC-B3( )30-2E HP 4-23TE55 BST-2892-1 Piston Fixture All #20 Spline HP 4-23TE56 BST-2892-2 Piston Fixture HC-B3( )30-2B HP 4-23TE57 BST-2908 Piston Fixture ( )HC-A3VF-4 and HC-B3WF-4 HP 4-24TE58 BST-10006 Rigging Cover HP 4-61,4-92

TE59 CST-2914 Spring Compressor Fixture HP 4-85,4-22, 4-23,4-24

TE60 BST-2812 Counterweight Clamp Gauge HP 4-16TE61 BST-2964 Thickness Gauge HP 4-37TE62 BST-2958L Hoist Ring Combo HP 4-35TE63 BST-3036 Piston Installation Cone HP 4-47,4-92TE64 BST-2985 Bearing Installation Tool HP 4-41TE64-1 BST-2985-1 Bearing Installation Tool HP 4-41TE65 AST-2849 Beta Rod Retainer Installation Tool HP 4-4TE66 7552-4/791975524 Helicoil Insert Installation Tool HE 4-115TE66-1 7552-5/791975525 Helicoil Insert Installation Tool HE 4-115TE66-2 7552-7/791975527 Helicoil Insert Installation Tool HE 4-115TE67 KHT9000-9 Thread Insert Installation Tool AL 4-112TE68 BST-3047 Thread Insert Installation Tool HP 4-51,4-112TE68-1 BST-3047-8 Thread Insert Installation Tool HP 4-51,4-112TE68-3 BST-3047-3 Thread Insert Installation Tool HP 4-51,4-112TE68-4 BST-3047-4 Thread Insert Installation Tool HP 4-51,4-112TE68-5 BST-3047-5 Thread Insert Installation Tool HP 4-51,4-112TE68-6 BST-3047-6 Thread Insert Installation Tool HP 4-51,4-112TE68-7 BST-3047-7 Thread Insert Installation Tool HP 4-51,4-112TE68-8 BST-3047-2 Thread Insert Installation Tool HP 4-51,4-112TE68-9 BST-3047-1 Thread Insert Installation Tool HP 4-51,4-112




TE69 BST-10001 Transfer Tube O-ring Installation Tool HP 4-59,4-94TE70 BST-3056 PCU Bushing Installation Tool HP 4-54,4-92TE71 BST-3057 PCU Bushing Installation Tool HP 4-54,4-92TE72 BST-3054 PCU Manifold Installation Tool HP 4-53,4-92TE73 AST-2856 Pilot O-ring Installation Tool HP 4-4TE74 BST-3037 Aft Control Spring Compressor HP 4-48,4-92TE75 BST-2982 Drill Jig HP 4-40TE76 BST-2983 Drill Jig HP 4-40TE77 BST-2806 Air Pressure Gauge Kit - Obsolete OBSTE78 CST-3028 Dual Acting Propeller Assembly Tool Kit HP 4-92TE79 CST-3028-1 Dual Acting Line Maintenance Tool Kit HP 4-94

TE80 BST-2912-10 “C” Flange Spindle HP 4-26, 4-91,4-99

TE81 796514021 Vacuum Pump 54976-029 VR 4-1TE82 A-2334 Tool Kit HP 4-1TE83 AST-2833 Safety Nozzle HP 4-3

TE84 BST-3041 Rigging Pin HP 4-49,4-92, 4-94

TE85 BST-2912-11 Stop Pin HP 4-26,4-99TE86 BST-2958 Pitch Angle Stop Plug HP 4-35TE87 BST-2938 Shot Peen Plug HP 4-29TE88 BST-2939 Shot Peen Plug HP 4-76TE89 BST-2939N Shot Peen Plug HP 4-30TE90 BST-2940 Shot Peen Plug HP 4-30TE91 BST-2941 Shot Peen Plug HP 4-31TE92 BST-2946 Shot Peen Plug HP 4-32TE93 DST-2934 Blade Bearing Press HP 4-100TE94 AST-2857 Probe and Probe Holder HP 4-5,4-111TE95 BT-1313(-)( ) Eddy Current Probe Unit OL 4-66,4-111

TE96 799200105/ PE 105 Bench Top Blade Angle Protractor PE

HP 4-112

TE97 BST-2960-3 Digital Protractor HP 4-36TE98 BST-3045 Puller HP 4-50,4-92TE99 BST-3039 Bearing Puller HP 4-49,4-92TE100 CST-2987 Beta System Puller HP 4-89TE101 BST-2947 Bushing Puller HP 4-32TE102 BST-2948 Bearing Puller HP 4-33TE103 BST-2949 Bearing Puller HP 4-33TE104 BST-2950 Bearing Puller HP 4-34TE105 BST-2951 Bearing Puller HP 4-76TE106 BST-2952 Bearing Puller HP 4-34TE107 BST-2876 Pilot Tube Puller HP 4-21,4-102




TE108 BT-223 Retention Bearing Puller HP 4-63TE108-1 BT-223+9 Adaptor CS/HP 4-63TE108-2 BT-223+10 Adaptor CS/HP 4-63TE109 GFS081 Socket, 6 Point, 1/8 inch, 3/8 Drive SO 4-92TE110 BST-3065 Blade Shot Peen Plug Removal Tool HP 4-58TE111 1227-6 Helicoil Insert Removal Tool HE 4-115TE112 BST-3019 Thread Insert Removal Tool HP 4-43TE112-1 BST-3019-3 Thread Insert Removal Tool HP 4-43TE112-3 BST-3019-4 Thread Insert Removal Tool HP 4-43TE112-4 BST-3019-8 Thread Insert Removal Tool HP 4-43TE113 BST-2884 Plug-Lifting Ring HP 4-22TE114 BST-2959 Alignment Check Rod HP 4-36TE115 BST-2984 Alignment Check Rod HP 4-41TE116 DT-1724-( ) Rolling Machine HP 4-102TE117 BST-10002 Beta Valve Freeze Sleeve HP 4-59,4-92TE118 BST-3060 Shot Peen Masking Tool HP 4-55TE119 AST-2961 Shipping Sleeve HP 4-8TE120 BST-2922 Modified Deep Well Socket HP 4-28

TE121 AST-2979 Test Specimen for Calibration HP 4-13, 4-111

TE122 BST-2912-2 #20 Spline Spindle HP 4-26,4-99TE123 BST-2912-3 #30 Spline Spindle HP 4-26,4-99TE124 BST-2912-1 Flanged Hub Spindle HP 4-26,4-99TE125 BST-2912 Building Buck Components HP 4-26,4-99TE125-1 BST-2912+ Building Buck Components HP 4-26,4-99TE126 BST-3024 Blade Assembly Support Stand HP 4-43TE127 BST-2912-12 Mid Pitch Stop HP 4-26,4-99TE128 BST-2847 Probe Support HP 4-20,4-111TE129 CST-2901-( ) Propeller Assembly Table HP 4-99,4-26TE130 n/a Vu Thru II Tachometer - no longer available n/a OBSTE131 BST-2825 Template HP 4-18TE132 79651417A Vacuum Filter 55007-020 VR 4-1TE133 ED-520 Eddy Current Test Instrument MF 4-111TE134 ED-530 Eddy Current Test Instrument MF 4-111TE135 79656547A Timer, 12 Hour 6X547 PE 4-1TE136 BST-10003 Flight Idle Set Fixture HP 4-60,4-92

TE137 BT-1271-1,2 Shot Peen Tube Assembly HP 4-64,4-95, 4-126

TE138 AST-2802 Plastic Wedge HP 4-1TE139 AST-2805 Torque Wrench Adaptor HP 4-2TE139-1 AST-2805-1 Torque Wrench Adaptor HP 4-2


TOOL AND EQUIPMENT INDEX 61-00-65 Page 2-5Rev. 14 Jun/13


TE139-2 AST-2805-2 Torque Wrench Adaptor HP 4-2TE140 BST-2963 Spinner Support Plate Wrench HP OBSTE141 BST-3044 Clamp Wrench HP 4-50,4-92TE142 BST-2813 Clamp Nut Wrench HP 4-17TE143 BST-3032 Open End Wrench HP 4-46TE144 SC058 Piston Nut Wrench SO 4-25TE144-1 SC058 Piston Nut Wrench SO 4-25TE145 n/a Superseded by TE144-1 n/a n/aTE146 BST-2910 Shaft Nut Wrench HP 4-15TE147 79651407K Vacuum Oil 54996-252 VR 4-1TE148 BT-461 Spanner Wrench HP 4-62TE149 AST-2814 Torque Wrench Adaptor HP 4-3TE150 BST-2860 Torque Wrench HP 4-21TE151 AST-2915 Torque Wrench Adaptor OBSTE152 AST-2917 Torque Wrench Adaptor HP 4-6TE153 BST-2921 Torque Wrench Adaptor HP 4-27TE154 AST-2953 Torque Wrench Adaptor HP 4-7TE155 AST-2877-1 Torque Wrench Adaptor HP 4-6,4-94TE156 796540702 Vacuum Hose YA-6407-02 CP 4-1TE157 BST-10005 Beta Switch Tester HP 4-61,4-92TE158 79651009A Vacuum Gauge 1009A JC 4-1TE159 BST-10007 Threaded Headless Pins HP 4-62,4-92TE160 7965639221 Vacuum Fitting YA-6392-21 CP 4-1TE161 BST-2974 Erosion Shield Bonding Clamp HP 4-38TE162 BST-2974-1 Erosion Shield Bonding Clamp HP 4-38TE163 BST-2974-2 Erosion Shield Bonding Clamp HP 4-38TE164 BST-2974-3 Erosion Shield Bonding Clamp HP 4-38TE165 BST-2974-4 Erosion Shield Bonding Clamp HP 4-38TE166 GTMU121 Universal Socket, 12 Point, 3/8 inch, 1/4 Drive SO 4-92TE167 n/a n/a n/a n/aTE168 BST-2974-7 Erosion Shield Bonding Clamp HP 4-38TE169 n/a n/a n/a n/aTE170 n/a n/a n/a n/aTE171 BST-2975 Fit Check Tool HP 4-39TE172 BST-2975-1 Fit Check Tool HP 4-39TE173 BST-2975-2 Fit Check Tool HP 4-39TE174 BST-2975-3 Fit Check Tool HP 4-39TE175 BST-2975-4 Fit Check Tool HP 4-39TE176 APS351 Adjustable Spanner Wrench, 1/8 Pin SO 4-92TE177 BST-2975-6 Fit Check Tool HP 4-39TE178 BST-2975-7 Fit Check Tool HP 4-39




TE179 n/a n/a n/a n/aTE180 BST-2975-9 Fit Check Tool HP 4-39TE181 BST-2966 Spinner Support Plate Ream Fixture HP 4-38TE182 BST-2966-3 Spinner Support Plate Ream Fixture HP 4-38TE183 BST-2966-4 Spinner Support Plate Ream Fixture HP 4-38TE184 BST-2966-5 Spinner Support Plate Ream Fixture HP 4-38TE185 BST-3055 PCU Bearing Installation Tool HP 4-53,4-92TE186 BST-3055-1 PCU Bearing Installation Tool HP 4-53,4-92TE187 CST-3000 Initial Erosion Shield Sample Program Kit HP 4-90TE188 CST-3000-1 Initial Erosion Shield Sample Program Kit HP 4-90TE189 CST-3000-2 Initial Erosion Shield Sample Program Kit HP 4-90TE190 CST-3000-3 Initial Erosion Shield Sample Program Kit HP 4-90TE191 CST-3000-4 Initial Erosion Shield Sample Program Kit HP 4-90

TE192 GFC48A Crowfoot Wrench, Open End with Side Lock Hole, 1 1/2 inch, 3/8 Drive SO 4-92

TE193 CST-3000-6 Initial Erosion Shield Sample Program Kit HP 4-90TE194 CST-3000-7 Initial Erosion Shield Sample Program Kit HP 4-90TE195 n/a n/a n/a n/aTE196 CST-3000-9 Initial Erosion Shield Sample Program Kit HP 4-90TE197 n/a n/a n/a n/aTE198 n/a n/a n/a n/aTE199 n/a n/a n/a n/aTE200 n/a n/a n/a n/aTE201 n/a n/a n/a n/aTE202 GFS161 Deep Well Socket, 12 Point, 1/2 inch, 3/8 Drive SO 4-92TE203 n/a n/a n/a n/aTE204 n/a n/a n/a n/aTE205 n/a n/a n/a n/aTE206 n/a n/a n/a n/aTE207 BT-1465-1 Floating Reamer HP 4-67TE207-1 BT-1465-3 Floating Reamer HP 4-67TE208 BT-1465-2 Floating Reamer HP 4-67TE208-1 BT-1465-4 Floating Reamer HP 4-67TE209 n/a n/a n/a n/aTE210 n/a n/a n/a n/aTE211 n/a n/a n/a n/aTE212 n/a n/a n/a n/aTE213 n/a n/a n/a n/aTE214 GFC012 Crowfoot Wrench, Open End, 3/8 in SO 4-94,4-92TE215 n/a n/a n/a n/a




TE216 n/a n/a n/a n/aTE217 n/a n/a n/a n/aTE218 n/a n/a n/a n/aTE219 BST-3004 Template HP 4-42TE220 BST-3004-1A Template HP 4-42TE221 BST-3004-1B Template HP 4-42TE222 BST-3004-2A Template HP 4-42TE223 BST-3004-2B Template HP 4-42TE224 BST-3004-3A Template HP 4-42TE225 BST-3004-3B Template HP 4-42TE226 BST-3004-4A Template HP 4-42TE227 BST-3004-4B Template HP 4-42TE228 BST-3067 Piston Installation Socket HP 4-29TE228-1 BST-3067+3 Piston Installation Socket HP 4-29TE229 GFA4A Socket Driver, 5/32 Hex. Head, 3/8 Drive SO 4-92TE230 BST-3004-6A Template HP 4-42TE231 BST-3004-6B Template HP 4-42TE232 BST-3004-7A Template HP 4-42TE233 BST-3004-7B Template HP 4-42TE234 n/a n/a n/a n/aTE235 n/a n/a n/a n/aTE236 BST-3004-9A Template HP 4-42TE237 BST-3004-9B Template HP 4-42TE238 BST-3026-1 Bearing Press HP 4-44TE239 BST-3026-2 Bearing Press HP 4-44TE240 BST-3026-3 Bearing Press HP 4-44TE241 BST-3064 Pilot Tube Installation Tool Kit HP 4-57

TE241-1 BST-3064A Pilot Tube Installation Tool Kit - Kit without the Pilot Tube Installation Tool HP 4-57

TE242 BST-3064-1 Pilot Tube Installation Tool HP 4-57,4-84TE243 BST-3064-2 Pilot Tube Positioner and Stop HP 4-57,4-84TE244 BST-3064-3 Pilot Tube Positioner and Stop HP 4-57,4-84TE245 BST-3064-4 Pilot Tube Positioner and Stop HP 4-57,4-84TE246 BST-3064-5 Pilot Tube Positioner and Stop HP 4-57,4-84TE247 BST-3068 Peening Tool HP 4-68TE248 GF10M Breaker Bar, 3/8 Drive SO 4-92TE249 GVO1820 Open End Wrench, Std Length, 9/16 - 5/8 in SO 4-93TE250 PFDH180 Socket, 12 Point, 9/16 inch, 3/8 Drive SO 4-93TE251 BST-10004 Modified Deep Well Socket HP 4-60,4-92TE252 668 Thickness Gauge ST 4-93TE253 QJFR275E Adjustable Torque Wrench, 5 to 75 ft-lb, 3/8 Drive SO 4-93




TE254 QJR217C Adjustable Torque Wrench, 30 to 200 in-lb, 3/8 Drive SO 4-93TE255 GFX1 Extension, 2 inches, 3/8 Drive SO 4-93TE256 GFC60A Crowfoot Wrench, 1 7/8 inch, 3/8 Drive SO 4-93TE257 ASA204A Miniature Pick Set SO 4-93TE258 170-6 Apex Torqset Bit, 1/4 inch, 1 1/4 Length AP 4-93TE259 1500-P Hand Driver, Replaceable-Bit AP 4-93TE260 90303A247 Nylon Jack Screws MC 4-93TE261 BLX13 Ball Head Hex. Wrench Set BH 4-92TE262 EN1901 Propeller Sling, 1 inch x 3 feet LC 4-94,4-92TE263 CUTA2810114C Installation & Extraction Tool for Relief Valve LE 4-93TE264 CUTA1870104C Installation & Extraction Tool for Oil Nozzle LE 4-93TE265 M22520/1-01 Beta Light Switch Crimping Tool DM 4-93TE266 CUTA1560203A Lee Plug Installation Tool LE 4-93TE267 CUTA1560103B Lee Plug Extraction Tool LE 4-93TE268 CUTA2180203B Lee Plug Installation Tool LE 4-93TE269 CUTA2180103B Lee Plug Extraction Tool LE 4-93TE270 CUTA2810203B Lee Plug Installation Tool LE 4-93TE271 CUTA2810103B Lee Plug Extraction Tool LE 4-93TE272 CUTA3120203B Lee Plug Installation Tool LE 4-93TE273 CUTA3120103B Lee Plug Extraction Tool LE 4-93TE274 BST-2970 PCU Bearing Seat Sander HP 4-69TE275 MR02030 Roller, Steel 1½" x 2" EP 4-117TE276 CST-3028-2 Dual Acting Line Maintenance Tool Kit HP 4-94TE277 CST-3012 Ultrasonic Inspection Calibration Standard HP 4-97,4-116TE278 BST-2810 Coupling Unit HP OBSTE279 BST-2808 Relief Valve Unit HP OBSTE280 AST-2807 Air Gauge HP OBSTE281 AST-2809 Hose Unit HP OBSTE282 AST-2827 Spring Compressor Bolt HP 4-18TE283 BST-2828 Spring Compressor Slide HP 4-19,4-18TE284 AST-2827-1 Spring Compressor Bolt HP 4-19TE285 791256000 Ultrasonic Flaw Detector Kit PM 4-116TE286 n/a n/a n/a n/aTE287 BST-2850 Threaded Rod HP 4-20TE288 AST-2852 Drilled Washer HP 4-20TE289 BST-3152 Thrust Bearing HP 4-20TE290 BST-3151 5/8 Hex Nut HP 4-20TE291 AST-2851 Guide Washer HP 4-20TE292 D1208A Electric Actuator VC OBSTE293 D2203 Control VC OBSTE294 90303A542 Nylon Jack Screws n/a OBSTE295 BST-2832 Superseded by BT-1313 n/a OBS




TE296 BST-3070 Drill Jig, PCU HP 4-70TE297 BST-3071 PCU Stand HP 4-70TE298 BST-2932 Dummy Pitch Change Rod HP 4-28TE299 BST-10037 E13890 Master Blade, Group 1 CS 4-71TE300 BST-10038 E13890 Master Blade, Group 2 CS 4-71TE301 BST-10039 E13890 Master Blade, Group 3 CS 4-71

TE302 HZP161001 E10950 Blade Repair Blanket BR 4-117, 4-118

TE303 HL1802E Heat Gun SA 4-118

TE304 HZP161002 Blade Repair Blanket (4" x 12") BR 4-117, 4-118

TE305 PMF133 0 - 6 inch Dial Calipers SO 4-93TE306 240-120F Temp-Plate® Recorder 120°F to 180°F WI 4-118TE307 240-190F Temp-Plate® Recorder 190°F to 220°F WI 4-118TE308 BST-3061 Press Tool HP 4-56,4-63TE309 BST-3062 Press Tool HP 4-56,4-63TE310 BT-3035 Centering Tool for C-5623-2 Drive Coupling HP 4-71TE311 BST-3066-2 Stop Adaptor HP 4-68TE312 n/a Superseded by TE389-3 n/a OBSTE313 n/a Superseded by TE389-4 n/a OBSTE314 n/a Superseded by TE389-1 n/a OBSTE315 BST-3069 Eddy Current Fixture HP 4-69,4-11TE316 9943HART-001 Unfeathering Tool CG 4-119TE317 n/a n/a n/a n/a

TE318 DST-3049-( ) Ground Hydraulic Power Unit (GHPU) HP 4-101, 4-52

TE319 AST-2981 Assembly Guide HP 4-8,4-20TE320 BST-3048 Transfer Tube and Plug Removal/Installation Tool HP 4-51,4-94TE321 BST-2811 Flatness Gauge HP 4-16TE322 n/a n/a n/a n/aTE323 CUTA1250203A Lee Plug Installation Tool LE 4-93TE324 CUTA1250103B Lee Plug Extraction Tool LE 4-93TE325 n/a Superseded by TE122 n/a OBSTE326 n/a Superseded by TE123 n/a OBSTE327 BST-2912-13 Blade Angle Stop HP 4-26,4-99TE328 MR01020 Roller, Smooth 1 1/8" x 1/8" EP 4-117TE329 MR10900 Roller, Gooseneck 1" x 1/16" EP 4-117TE330 MR05000 Roller, Rubber 2" EP 4-117TE331 MR05020 Roller, Silicon 1 5/16" x 1¾" EP 4-117TE332 GS4H Tie Strap Gun AE 4-119TE333 AT-3010 Balance Tube Positioner HP 4-10TE334 AT-3011 Balance Tube Positioner HP 4-10


TOOL AND EQUIPMENT INDEX 61-00-65 Page 2-10Rev. 16 Apr/14


TE335 BST-3004-10A Template HP 4-42TE336 BST-3004-10B Template HP 4-42TE337 BST-3004-11A Template HP 4-42TE338 BST-3004-11B Template HP 4-42TE339 n/a n/a n/a n/aTE340 BST-2975-10 Fit Check Tool HP 4-39TE341 CST-3000-10 Initial Erosion Shield Sample Program Kit HP 4-90TE342 CST-3000-A Supplemental Erosion Shield Sample Program Kit HP 4-90TE343 n/a Superseded by BT-1313 n/a OBSTE344 n/a Superseded by BT-1313 n/a OBS

TE345 CST-3000-1A Supplemental Erosion Shield Sample Program Kit HP 4-90








TE353 BST-2930-5 SR19W4-A Slimsert® Installation Tool HP

RC 4-13

TE354 CUST. P/N Megohm Meter AR 4-121TE355 CUST. P/N Milliohmmeter AR 4-122TE356 CG40-4 PCU Filter Removal Tool, Rod SO 4-110TE357 CG40-7 PCU Filter Removal Tool, Collet SO 4-110TE358 240-090F Temp-Plate® Recorder 90°F - 120°F WI 4-120TE359 90F2312 Signal Generator Model 3001 BK 4-120TE360 BST-10015 Modified Crowfoot SO 4-72

TE361 DST-10024 DST-10024-1 Bolt Alignment Tool HP 4-103

TE362 BST-10026 Pitch Lock Roller Fixture HP 4-72TE363 DST-10016 Roller Assembly Tool HP 4-103TE364 DST-10025 Go-No-Go Gauge HP 4-104

TE365 CG250-8A and CG250-9 Slide Hammer, 2 lb. SO 4-123

TE366 CG41-11 Slide Hammer, Rod SO 4-123TE367 CG41-14 Slide Hammer, Collet, 1/4 inch to 5/16 inch SO 4-123TE368 CG41-13 Slide Hammer, Collet, 3/8 inch to 7/16 inch SO 4-123TE369 MS27495R20 Pin Extractor CS 4-122TE370 000-951-005 Bransonic Cleaner Model B3 BN 4-121TE371 BST-3080 Shot Peen Plug HP 4-73TE372 BST-3080-1 Shot Peen Plug HP 4-73




TE373 CST-10050 Optical Comparator Overlay HP 4-88

TE374 CUST. P/N Transducer Assembly PM 4-124, 4-116

TE375 Approved Units Ultrasonic Flaw Detector Cust. P/N 4-124, 4-116

TE376 BST-2975-11 Fit Check Tool HP 4-39TE377 BST-2975-12 Fit Check Tool HP 4-39TE378 BST-2975-13 Fit Check Tool HP 4-39

TE379 02643 Shot Peen Gun CL 4-126, 4-64,4-95

TE380 CST-3110 Cylinder Cap HP 4-96TE381 BST-3109 T-Handle Wrench HP 4-74TE382 DST-3146 Thread Gauge Airflow Kit HP 4-106,4-81TE382-1 DST-3146-1 Thread Gauge Airflow Kit HP 4-81,4-106TE383 BST-3103 Feathering Tool HP 4-74TE384 BST-3104 Cylinder Installation Rod HP 4-75TE385 BST-2837+1+3 Modified Socket HP 4-19TE386 BST-2837+2 Anti-Rotation Pin HP 4-19TE387 B-3368 5/16-24 Hex Nut HP 4-20TE388 A-3204 5/16-24 Set Screw HP 4-20

TE389-1

BST-2930-1 SR25W4A MR25W4A 225-072722

Slimsert® Installation Tool

HP RC MK AC

4-114,4-12

TE389-2

BST-2930-2 SR43W4A MR43W4A 225-072734


HP RC MK AC

4-114

TE389-3

BST-2930-3 SR50W4AMR50W4A 225-072738 225-890051


HP RC MK AC AC

4-114

TE389-4

BST-2930-4 SR56W4A MR56W4A 225-072742 225-890053


HP RC MK AC AC

4-114

TE389-5

BST-2930-5 SR19W4A MR19W4A 225-072718


HP RC MK AC

4-114

TE389-6

BST-2930-6 SR16W4AMR16W4A 225-072714


HP RC MK AC

4-114




TE389-7

BST-2930-7 SR37W4A MR37W4A 225-072730 225-890031


HP RC MK AC AC

4-114

TE389-8

BST-2930-8 SR31W4AMR31W4A 225-072726


HP RC MK AC

4-114

TE389-9

BST-2930-9 SR14W4AMR14W4A 225-072710


HP RC MK AC

4-114

TE389-10

BST-2930-10 SR11W4AMR11W4A 225-072706


HP RC MK AC

4-114

TE390 DT-2997-2 Pressure Check Adapter CS 4-105, 4-104

TE391 DT-2997-4 Pitch Change Bore Plug CS 4-104, 4-105

TE392 DT-2997-5 Pitch Change Bore Plug CS 4-104, 4-105



TE395 0.0525 inch dia. Gear Inspection Wire VK 4-125TE396 0.0620 inch dia. Gear Inspection Wire VK 4-125TE397 0.0850 inch dia. Gear Inspection Wire VK 4-125TE398 0.2634 inch dia. Gear Inspection Wire VK 4-125TE399 0.2700 inch dia. Gear Inspection Wire VK 4-125TE400 0.0962 inch dia. Gear Inspection Wire VK 4-125TE401 0.1400 inch dia. Gear Inspection Wire VK 4-125TE402 0.1480 inch dia. Gear Inspection Wire VK 4-125TE403 BST-3022 Reamer HP 4-75TE403-1 BST-3022A Reamer HP 4-75TE404 AST-2968 Stud Installation/Torque Check Tool HP 4-12TE404-1 AST-2968-1 Stud Installation/Torque Check Tool HP 4-12TE404-2 AST-2968-2 Stud Installation/Torque Check Tool HP 4-12TE405 AST-3163-( ) Shot Peen Plug Kit HP 4-11TE406 AST-3157 Shot Peen Plug HP 4-11TE407 AST-2971-1 Screw - 0.50 inch (12.7 mm) HP 4-11TE408 AST-2971-2 Screw - 0.62 inch (15.7 mm) HP 4-11TE409 A-2327 Slimsert® Repair Kit HP 4-12




TE410 B-6986-258 SR258 Slimsert® HP

RC 4-12

TE411 791762313 5/16-24 UNF-3B MOD Tap HP

RC 4-12

TE412 BST-2931-1 SR25D Step Drill HP

RC 4-12

TE413 CST-2969 Blade Angle Locating Fixture HP 4-96TE414 BST-3006 Paint Mask Cap HP 4-77TE415 BST-3158 Paint Mask Cap HP 4-77TE416 BST-3159 Paint Mask Cap HP 4-77TE417 BST-3160 Paint Mask Cap HP 4-77TE418 BST-3161 Paint Mask Cap HP 4-77TE419 BST-3162 Paint Mask Cap HP 4-77TE420 BST-2991 Spacer HP 4-78TE421 AST-3154 Slimsert® Repair Kit HP 4-13

TE422 B-6986-192 SR192 Slimsert® HP

RC 4-13

TE423 99620070 1/4-28 UNF-3B Tap HP

RC 4-13

TE424 BST-2931-5 SR19D Step Drill HP

RC 4-13

TE425 n/a n/a n/a n/aTE426 n/a n/a n/a n/aTE427 CST-3169 Sleeve Installation Tool HP 4-97TE428 BST-3081 Mask Screw HP 4-78


TE430 .2760 Pin Gauge, Minus "Y" Tolerance No Go Gauge HM 4-127

TE431 BST-3200 E13890 Master Blade, Group 0 CS 4-71TE432 AST-3175 Torque Wrench Adaptor CS 4-7TE433 BST-2912-17 A Flange Spindle HP 4-26TE434 101088 Eddy Current Probe HP 4-127TE435 CST-3015 Calibration Standard HP 4-98TE436 AST-3475 Profilometer MH 4-14,4-79TE437 BST-3227 Probe Housing Component HP 4-79,4-14TE438 BST-3226 Blade Pitch Fixture HP 4-79TE439 AST-3174 Ball Hex Driver HP 4-14TE440 BST-3177 Blade Seal Alignment Tool HP 4-80TE440-1 BST-3063 Blade Seal Alignment Tool HP 4-80TE441 BST-7587 Pressure Check Tool CS 4-82

TE441-1 BST-7587-1 Pressure Check Tool - Kit without the Pilot Tube Installation Tool CS 4-82




TE441-2 BST-7587-2 Pressure Check Tool CS 4-82TE442 BST-4114 Composite Balance Tube Puller CS 4-80TE443 BT-3838 Grease Seal Pressure Test Tool (Adapter) HP 4-81,4-106TE443-1 BT-3838-1 Grease Seal Pressure Test Tool HP 4-81,4-106TE444 DST-3483 Masking Fixture CS 4-107TE445 BST-7588 Insert Installation Tool CS 4-82

TE446 DST-5855(F) Shot Peen Machine Assembly CS/WH 4-108, 4-109

TE447 DST-5855-1(F) Shot Peen, "Y" Shank Knob Kit HP 4-109, 4-108

TE448 CST-3178 Bolt Alignment Fixture HP 4-98

TE449 101679 "E" Shank Form Tool HP 4-128, 4-129

TE449-1 105473 "E" Shank Form Tool HP 4-128, 4-129

TE450 101736 "E" Shank Potting Mold HP 4-128, 4-129

TE451 GT-3669 Composite E-shank Comparison Chart HP 4-129, 4-128

TE452 101999 Tube Puller Assembly CS 4-129TE453 101923 Balance Adapter CS 4-130TE454 101781 Plug Puller HP 4-130TE455 101932 Blade Spud Adapter CS 4-131TE456 103570 Mandrel CS 4-131TE457 101939 Torque Wrench Adapter CS/HP 4-132TE458 101060 Shot Peen Plug HP 4-132TE459 103572 Ring CS 4-133TE460 102690 E13890 Master Blade, Group 4 CS 4-71TE461 BST-3004-12A Template HP 4-42TE462 BST-3004-12B Template HP 4-42TE463 BST-3004-13A Template HP 4-42TE464 BST-3004-13B Template HP 4-42TE465 BST-3004-14A Template HP 4-42TE466 BST-3004-14B Template HP 4-42TE467 BST-3004-15A Template HP 4-42TE468 BST-3004-15B Template HP 4-42TE469 BST-3004-16A Template HP 4-42TE470 BST-3004-16B Template HP 4-42TE471 BST-3004-19A Template HP 4-42TE472 BST-3004-20A Template HP 4-42TE473 BST-3004-20B Template HP 4-42TE474 CST-3000-11 Initial Erosion Shield Sample Program Kit HP 4-90





TE476 CST-3000-12 Initial Erosion Shield Sample Program Kit HP 4-90


TE478 CST-3000-15 Initial Erosion Shield Sample Program Kit HP 4-90

TE479 CST-3000-15A Supplemental Erosion Shield Sample Program Kit HP 4-90TE480 BST-2975-14 Fit Check Tool HP 4-39TE481 BST-2975-16 Fit Check Tool HP 4-39TE482 BST-2975-17 Fit Check Tool HP 4-39TE483 BST-2975-18 Fit Check Tool HP 4-39TE484 BST-2975-19 Fit Check Tool HP 4-39TE485 BST-2975-20 Fit Check Tool HP 4-39TE486 791911212 212-8 Driver HP 4-133TE487 CST-421 Stud Fixture Plate HP 4-83TE488 BST-2890 Spring Compressor Base HP 4-22,4-85TE488-1 BST-2891 Spring Compressor Base HP 4-22,4-85TE488-2 BST-2894 Spring Compressor Base HP 4-22,4-85TE489 BST-2895 Spring Compressor Retainer HP 4-23,4-85TE489-1 BST-2896 Spring Compressor Retainer HP 4-23,4-86TE489-2 BST-2897 Spring Compressor Retainer HP 4-23,4-85TE489-3 BST-2899 Spring Compressor Retainer HP 4-23,4-85TE490 BST-2902 Spring Compressor Guide Rod HP 4-24,4-85TE490-1 BST-2903 Spring Compressor Guide Rod HP 4-24,4-86TE490-2 BST-2904 Spring Compressor Guide Rod HP 4-24,4-85TE490-3 BST-2905 Spring Compressor Guide Rod HP 4-24,4-85TE490-4 BST-2907 Spring Compressor Guide Rod HP 4-24,4-85TE491 DST-3017 Propeller Transport Cart HP OBS

TE492 BST-3050 Chip Detector Fitting HP 4-52, 4-101

TE493 BST-3051 Chip Dectector Fitting Cover HP 4-52, 4-101

TE494 BT-1271-4 Shot Nozzle Unit HP 4-64,4-95, 4-126

TE494-1 BT-1271-5 Shot Nozzle Unit HP 4-64,4-95, 4-126




TE495 104287 Torque Wrench CS 4-134TE496 104371 Stand Adapter MF 4-134TE497 104372 Drive Housing Adapter MF 4-135TE498 104374 Roughness Standard MF 4-135




TE499 M22520/37-01 Crimp Tool CS 4-136TE500 BST-3076 Calibration Standard HP 4-136TE501 BST-3077-1 Eddy Current Probe CS 4-137TE502 104933 Fitting Wrench CS 4-137TE503 104811 Spacer Blank CS 4-138TE504 105189 Bearing Assembly Tool CS 4-139TE505 105190 Clamp CS 4-139TE506 104507 Leak Check Manifold CS 4-140TE507 104504 Adapter CS 4-140TE508 104798 Check Cylinder HP 4-141TE509 105167 Check Cylinder CS 4-141TE510 104506 Plug Assembly CS 4-142TE511 BST-2975-21 Fit Check Tool HP 4-39TE512 BST-2975-22 Fit Check Tool HP 4-39TE513 BST-2975-23 Fit Check Tool HP 4-39TE514 BST-2975-24 Fit Check Tool HP 4-39TE515 BST-2975-25 Fit Check Tool HP 4-39TE516 BST-3075 Double Shoulder Blade Eddy Current Kit HP 4-143TE517 105266 Torque Unit Adapter CS 4-144TE518 105269 Torque Unit Adapter CS 4-144TE519 BST-2912-20 Hovercraft 5-Way Adapter CS 4-145TE520 BST-2912-21 Hovercraft 6-Way Adapter CS 4-145TE521 BST-3004-21A Template HP 4-42TE522 BST-3004-21B Template HP 4-42TE523 BST-3004-22A Template HP 4-42TE524 BST-3004-22B Template HP 4-42TE525 BST-3004-23A Template HP 4-42TE526 BST-3004-23B Template HP 4-42TE527 BST-3004-24A Template HP 4-42TE528 BST-3004-24B Template HP 4-42TE529 BST-3004-25A Template HP 4-42TE530 BST-3004-25B Template HP 4-42TE531 105274 Balance Adapter HP 4-146TE532 Contact Hartzell Bantam Blade Spud Adapter HP 4-146TE533 102560 Leak Detector Kit HP 4-147TE534 105478 Blade Adapter Service Tool HP 4-147TE535 104052 Drill Jig for N7605 Shank HP 4-148TE536 BST-2912-19 “H”, “T”, “Q”, and “G” Flange Spindle HP 4-26TE537 102515 Shank Spacer Puller CS 4-149TE538 102516 Shank Spacer Puller CS 4-149TE539 105501 Blade Inspection Adapter CS 4-150TE540 103454 Stud Preload Plate CS 4-150TE541 BST-2974-5 Erosion Shield Bonding Clamp HP 4-38TE542 BST-2974-6 Erosion Shield Bonding Clamp HP 4-38TE543 BST-2974-8 Erosion Shield Bonding Clamp HP 4-38




TE544 BST-2974-9 Erosion Shield Bonding Clamp HP 4-38TE545 BST-2974-10 Erosion Shield Bonding Clamp HP 4-38TE546 BST-2974-11 Erosion Shield Bonding Clamp HP 4-38TE547 105615 Valve Assembly Check Tool CS 4-149TE548 105532 Bantam Spring Compressor HP 4-150TE549 BST-2975-15 Fit Check Tool HP 4-39


ALPHABETICAL INDEX 61-00-65 Page 3-1Rev. 12 Aug/11

The Alphabetical Index has been replaced by the Tool and Equipment Index. Refer to the Tool and Equipment Index in this manual.


ALPHABETICAL INDEX 61-00-65 Page 3-2Rev. 12 Aug/11



TOOL AND EQUIPMENT LIST 61-00-65 Page 4-1Rev. 12 Aug/11

Tool KitPart Number: A-2334 (TE82)

Description: Kit to prepare facilities for erosion shield replacement on composite blades. The kit contains the following:

Vendor Vendor P/N Hartzell P/N Description Qty/Size

VR 54976-029 796514021 (TE81) Vacuum Pump 1

VR 55007-020 79651417A (TE132) Filter 1

PE 6X547 79656547A (TE135) Timer, 12-hour 2

VR 54996-252 79651407K (TE147) Vacuum Oil 5 gallons

CP YA-6407-02 796540702 (TE156) Vacuum Hose (6 ea.) 10 feet

JC 1009A 79651009A (TE158) Vacuum Gauge 2

CP YA-6392-21 7965639221 (TE160) Vacuum Fitting 1

Plastic WedgePart Number: AST-2802 (TE138)

Description: Wedge to aid in separating the hub halves of an aluminum hub propeller without scarring the mating surfaces.



Ring Centering ToolPart Number: AST-2803 (TE17)

Description: Tool to keep internal rings in alignment. Used during assembly of oil transfer unit for A-224-2 Seal in propeller model HC-A2X20-4( )2.

Torque Wrench AdaptorPart Number: AST-2805 (TE139) “K” flange steel hub propellers AST-2805-1 (TE139-1) “W” flange propellers AST-2805-2 (TE139-2) “D” flange propellers

Description: Wrench to tighten and torque mounting bolts on propellers. Used in conjunction with a standard 1/2 inch square drive torque wrench.



Torque Wrench AdaptorPart Number: AST-2814 (TE149)

Description: Wrench to tighten and torque 9/16 inch, 12 point mounting bolt. Used in conjunction with a standard 1/2 inch square drive torque wrench.

Supersedes: A-2814

Safety NozzlePart Number: AST-2833 (TE83)

Description: Fitting to ensure safe use of air nozzle.



APS-201

Beta Rod Retainer Installation ToolPart Number: AST-2849 (TE65)

Description: Tool to crimp the beta rod retainers onto the beta rod. Used in conjunction with a standard vise.

Pilot O-ring Installation ToolPart Number: AST-2856 (TE73)

Description: Installation tool for A-217-1, -2 Plug. For use with A-224-3, -4 Oil Transfer Unit.

NOTE: This part number may be used to order the drawing to permit local fabrication.



Block

Area to be Inspected

Probe

APS-381

APS-155

Probe and Probe HolderPart Number: AST-2857 (TE94)

Description: Part of Eddy Current Instrument used to inspect “Y” shank aluminum blade retention radius.

Hub Bearing Radius ComparatorPart Number: AST-2870 (TE27)

Description: Comparator to ensure proper fit of blade retention bearing into “D” or “Y” shank hubs.



Propeller Mounting Flange

Aircraft EngineMounting Flange

Standard Torque Wrench

Torque Wrench Adaptor AST-2877-( )

MountingBolt

PropellerMounting

O-ring

APS-543

Torque Wrench AdaptorPart Number: AST-2877 (TE5) 5/8 inch

AST-2877-1 (TE155) 11/16 inch

Description: Wrench adaptor to install and torque mounting bolts. Used in conjunction with a standard 1/2 inch square drive torque wrench.

Torque Wrench AdaptorPart Number AST-2917 (TE152)

Description Wrench to tighten and torque propeller mounting bolts on “K” flange propellers. Used in conjunction with a standard 1/2 inch square drive torque wrench.

Supersedes: A-1327


TOOL AND EQUIPMENT LIST 61-00-65 Page 4-7Rev. 14 Jun/13


Description: Wrench to tighten and torque mounting bolts on “L” flange propellers. Used in conjunction with a standard 1/2 inch square drive torque wrench.


Description: Wrench to tighten and torque mounting bolts on “W” flange propellers. Used in conjunction with a standard 1/2 inch square drive torque wrench.

NOTE: This part number may be used to order the drawing of the torque wrench adaptor to permit local fabrication.

AST-3175



Shipping SleevePart Number: AST-2961 (TE119)

Description: Sleeve to prevent damage to air valves on feathering compact propellers during shipping and handling.

Assembly GuidePart Number: AST-2981 (TE319)

Description: Assembly tool for Spring Assemblies. Used with BST-2853 (TE9) Assembly Tool.

NOTE: One order of Assemby Guide AST-2981 includes a quantity of two (2) guides.



Spring CompressorPart Number: AT-725-1 (TE29)

Description: Spring compressor for beta springs during assembly.

(This space is intentionally blank.)


Page 4-10Rev. 15 Dec/13

TOOL AND EQUIPMENT LIST 61-00-65

Balance Tube PositionerPart Number: AT-3011 (TE334)

Description: Balance tube positioner used for installing balance tubes in composite blades used in an aluminum hub propeller.

Balance Tube PositionerPart Number: AT-3010 (TE333)

Description: Balance tube positioner used for installing balance tubes in "M" shank composite blades.

AT-3010

AT-3011



Shot Peen Plug KitPart Number: AST-3163-( ) (TE405)

Description: Kit to mask the chamfered lubrication fittings in two-blade and three-blade aluminum hubs.

Kit:

AST-3163 Kit for two-blade aluminum hubs, includes:

Components Quantity

1 . . . . . AST-3157 (TE406) Shot Peen Plug 4 2 . . . . . AST-2971-1 (TE407) Screw - 0.50 inch (12.7 mm) 2 3 . . . . . AST-2971-2 (TE408) Screw - 0.62 inch (15.7 mm) 2

AST-3163-1 Kit for three-blade aluminum hubs, includes:

Components Quantity

1 . . . . . AST-3157 (TE406) Shot Peen Plug 6 2 . . . . . AST-2971-1 (TE407) Screw - 0.50 inch (12.7 mm) 6

ScrewShot Peen Plug

AST3157 AST2971




Stud Installation/Torque Check ToolPart Number: AST-2968 (TE404) (Install/check 1/2-20 [12.7 mm] studs.)

AST-2968-1 (TE404-1) (Install/check 9/16-18 [14.2 mm] studs.) AST-2968-2 (TE404-2) (Install/check 7/16-20 [10.9 mm] studs.)

Description: Used to install hub mounting studs and to check the required torque after stud adhesive cures.

Slimsert® Repair KitPart Number: A-2327 (TE409)

Description: Kit including tools and parts necessary to repair to the lubrication fitting holes in aluminum hubs. The kit contains the following:

Vendor Vendor P/N Hartzell P/N Description Qty

RC SR258 B-6986-258 (TE410) Slimsert® 1

n/a 5/16-24 UNF-3B MOD 791762313 (TE411) Tap 1 (Minor diameter 0.280-0.285 MOD)

RC SR25W4-A BST-2930-1 (TE389-1) Slimsert® Installation Tool 1 (Supersedes TE314)

RC SR25D BST-2931-1 (TE412) Step Drill 1

AST2968


TOOL AND EQUIPMENT LIST 61-00-65 Page 4-13Rev. 15 Dec/13

Slimsert® Repair KitPart Number: AST-3154 (TE421)

Description: Kit including tools and parts necessary to repair to the link pin unit safety screw hole. Not shown. The kit contains the following:

Vendor Vendor P/N Hartzell P/N Description Qty

RC SR192 B-6986-192 (TE422) Slimsert® 1

n/a 1/4-28 UNF-3B 99620070 (TE423) Tap 1

RC SR19W4-A BST-2930-5 (TE353) Slimsert® Installation Tool 1

RC SR19D BST-2931-5 (TE424) Step Drill 1

Test Specimen for CalibrationPart Number: AST-2979 (TE121)

Description: Test specimen to calibrate an eddy current instrument before its use.

AST-2979


TOOL AND EQUIPMENT LIST 61-00-65 Page 4-14Rev. 13 Jul/12

Shaft Nut WrenchPart Number: BST-2910 (TE146)

Description: Wrench to tighten the propeller mounting shaft nut on #20, #30 and #40 splined propellers.

Supersedes: BT-2804, BT-840, BST-2804 and BST-840

Ball Hex DriverPart Number: AST-3174 (TE439)

Description: Used with 3/8 inch ratchet on the B-3812-5-16P socket head cap screw to set preload on blade assembly.

AST3174



Profilometer Part Number: AST-3475 (TE436)

Description: Used to measure surface finish in the radius and transition areas of aluminum blade shanks. Probe Housing Component BST-3227 (TE437) is available for use with the Hartzell and Mahr Federal models. Stand Adapter 104371 (TE496) and Drive Housing Adapter 104372 (TE497) are available for use with the Mahr Federal Model as an alternate to BST-3227. Use of Stand Adapter 104371 (TE496) and Drive Housing Adapter 104372 (TE497) connect the drive unit to a standard height stand (customer procured) without the use of BST-3227 (TE437).

Hartzell Approved Alternates:

Vendor Part Number Vendor

Perthometer 6910431 Mahr Federal Inc. (MF)

Perthometer 6910134 Mahr Federal Inc. (MF) (no longer available)

Perthometer 6910135 Mahr Federal Inc. (MF) (no longer available)

Surftest SV-600 series Mitutoyo America Corporation (MT) (no longer available)

TI-165005

Perthometer 6910431 Mahr Federal Inc. (MF)



Flatness GaugePart Number: BST-2811 (TE321)

Description: Flatness gauge for steel hub flanges.

Counterweight Clamp GaugePart Number: BST-2812 (TE60)

Description: Gauge to locate D-1209 Counterweight Clamp on A10460E Composite Blade.

Supersedes: BG-3445



Clamp Nut WrenchPart Number: BST-2813 (TE142)

Description: Wrench to hold A-1373 Clamp Nut while torquing A-1372 Bolt.

Supersedes: B-2813

Outboard Clamp Bolt

A-1372

Standard 12 point Socket

Special Wrench

BST-2813

Spinner Mounting Plate BenderPart Number: BST-2823 (TE11)(CS)

Description: Spinner mounting plate bender to achieve acceptable deice slip ring runout.

Supersedes: B-2823



Template Part Number: BST-2825 (TE131)

Description: Template to check minimum wall thickness of T10176( ) Blade bore.

Supersedes: B-2825

APS-488

Spring Compressor AssemblyPart Number: BST-2826 (TE30)

Description: Spring compressor to compress or decompress the feathering spring for propeller assembly or disassembly on propeller model HC-E2Y( )-2( ).

Components: 1 AST-2827 (TE282) Spring Compressor Bolt 2 BST-2828 (TE283) Spring Compressor Slide

1

2



Spring Compressor AssemblyPart Number: BST-2826-1 (TE31)

Description: Spring compressor to compress or decompress the feathering spring for propeller assembly or disassembly on propeller model number

HC-E2Y( )-2( ).

Components: 1 AST-2827-1 (TE284) Spring Compressor Bolt 2 BST-2828 (TE283) Spring Compressor Slide

1

2

Torque Wrench AdapterPart Number: BST-2837 (TE6) (Includes TE385 and TE386)

Description: Installation of the pitch change rod in compact aluminum -2 propellers. Used with standard 1/2 inch square drive torque wrench.

Components: 1 . . . .BST-2837+1+3 (TE385) Modified Socket

2 . . . .BST-2837+2 (TE386) Anti-Rotation Pin

Supersedes: BT-2837APS6259

TE385TE386

BST2826A



Probe SupportPart Number: BST-2847 (TE128)

Description: Probe support to ensure accurate contact of probe to blade surface during Eddy Current Inspection.

Supersedes: BT-2847

Assembling ToolPart Number: BST-2853 (TE9)

Description: Tool to assemble and disassemble the Feather Assist Spring Assembly on the compact aluminum -2 propeller. Used with AST-2981 (TE319) Assembly Guide.

Components: 1 B-3368 (TE387) 5/16-24 Hex Nut 2 BST-2850 (TE287) Threaded Rod 3 AST-2852 (TE288) Drilled Washer 4 BST-3152 (TE289) Thrust Bearing (supersedes GT-3) 5 BST-3151 (TE290) 5/8 Hex Nut 6 AST-2851 (TE291) Guide Washer 7 A-3204 (TE388) 5/16-24 Set Screw

5 6 2 3

4

1

7



Torque WrenchPart Number: BST-2860 (TE150)

Description: Wrench to tighten and torque mounting bolts on “K”, "R", or “L” flange propellers. Used in conjunction with a standard 1/2 inch square drive torque wrench.

Supersedes: BST-2835 and BT-2860

Pilot Tube PullerPart Number: BST-2876 (TE107)

Description: This part number may be used to order the drawing of the pilot tube puller for local fabrication. Puller to remove pilot tubes from steel hub propellers. Used in conjunction with DT-336 (TE53) or customer supplied fixture.

Supersedes: CST-2831



Plug-Lifting RingPart Number: BST-2884 (TE113)

Description: Ring to thread into pitch change rod of turbine propellers for lifting and moving.

Spring Compressor BasePart Number: BST-2890 (TE488) BST-2891 (TE488-1) BST-2894 (TE488-2)

Description: Spring Compressor Base is to be used in conjunction with CST-2914 (TE59) Spring Compressor Fixture. Refer to CST-2914 (TE59) to determine which Spring Compressor Base (TE488-[ ]) to use with Spring Assembly type.



Piston FixturePart Number: BST-2892 (TE54) HC-B3( )30-2E BST-2892-1 (TE55) ALL #20 Spline BST-2892-2 (TE56) HC-B3( )30-2B

Description: Fixture to balance propellers. Used with some models of Marvel Manufacturing Company balancers.

NOTE: For left hand propeller, add L to dash number of fixture.

Supersedes: BSK-274

Spring Compressor RetainerPart Number: BST-2895 (TE489) BST-2896 (TE489-1) BST-2897 (TE489-2) BST-2899 (TE489-3)

Description: Spring Compressor Retainer is to be used in conjunction with CST-2914 (TE59) Spring Compressor Fixture. Refer to CST-2914 (TE59) to determine which Spring Compressor Retainer (TE489-[ ]) to use with Spring Assembly type.




Spring Compressor Guide RodPart Number: BST-2902 (TE490) BST-2903 (TE490-1) BST-2904 (TE490-2) BST-2905 (TE490-3) BST-2907 (TE490-4)

Description: Spring Compressor Guide Rod is to be used in conjunction with CST-2914 (TE59) Spring Compressor Fixture. Refer to CST-2914 (TE59) to determine which Spring Compressor Guide Rod (TE490-[ ]) to use with Spring Assembly type.

Piston FixturePart Number: BST-2908 (TE57)

Description: Fixture to balance propeller models ( )HC-A3VF-4 and HC-B3WF-4. Used with some models of Marvel Manufacturing Company balancers.

Supersedes: BSK-484



Piston Nut WrenchPart Number TE Number Description

SC058 (SO) TE144 Wrench to tighten A-880-1 Piston Nut on a steel hub turbine propeller. Customer procured.

SC058 (SO) TE144-1 Wrench to remove A-880-2A Piston Nut on a steel (Supersedes TE145) hub turbine propeller. Customer procured.

NOTE: TE144 and TE144-1 are the same.

Supersedes: B-842, B-842-1, BST-2911, BST-3911-1APS-205




Building Buck ComponentsPart Number: BST-2912 (TE125) Building Buck Components, includes items 1 through 9 listed belowItem Number Part Number Description 1 ...............BST-2912+ (TE125-1) Spindle Base; Supersedes: B-843-2 (Includes TE85) 2 ...............BST-2912-1 (TE124) Flanged Hub Spindle (Includes TE4)

Supersedes: BST-2812 3 ...............BST-2912-2 (TE122) #20 Spline Spindle; not shown 4 ...............BST-2912-3 (TE123) #30 Spline Spindle; not shown 5 ...............BST-2912-4 (TE4) Adapter Ring; Permits mounting of “N” flange

propellers 6 .................BST-2912-9 (TE2) Adapter; Permits mounting of “A” flange single

acting propellers 7 ...............BST-2912-11 (TE85) Stop Pin; not shown 8 ...............BST-2912-12 (TE127) Mid Pitch Stop; Supersedes: BT-2162; not shown 9 ...............BST-2912-13 (TE327) Blade Angle Stop for -5 Propellers; not shownAlso available as necessary (not a part of BST-2912 (TE-125): BST-2912-10 (TE80) “C” Flange Spindle; allow mounting of “C” flange HD-E6C-3 propeller;

not shownBST-2912-17 (TE433) “A” Flange Spindle; allow mounting of “A” flange HC-E5A-2 propeller;

not shownBST-2912-19 (TE536) “H”, “T”, “Q”, and “G” Flange Spindle; allow mounting of “H”, “T”, “Q”,

and “G” flange propellers; shown on page 4-148 of this manualDescription: Spindle mounts to propeller assembly table CST-2901(-) (TE129) to permit

pressurizing of propeller to change pitch. Also permits rotating of the propeller.

Obsolete: BST-2912-8 (TE1) Adapter; Allow mounting of “C” flange single acting propellers; not shown

BST-2912+ Spindle Base

APS-546

BST-2912-1 Flanged Hub

Spindle

BST-2912-4Adapter Ring

BST-2912-9Adapter



Drill FixturePart Number: BST-2920 (TE51)

Description: Fixture to modify C-3201 Piston for installation of external feather stop.

APS-175

Torque Wrench AdapterPart Number: BST-2921 (TE153)

Description: Wrench to remove, install and torque cylinders on aluminum hub propellers.

Supersedes: BST-2801



Modified Deep Well SocketPart Number: BST-2922 (TE120)

Description: Modified socket to remove, install and torque piston mounting nuts on light-weight turbine propellers.

PitchChange

Rod

Modified Deep WellSocket No. BST-2922

Piston

APS-152

Dummy Pitch Change RodPart Number: BST-2932 (TE298)

Description: Used during assembly of the HC-A6A-3 propeller.



Shot Peen PlugPart Number: BST-2938 (TE87)

Description: Plug to mask the blade bore prior to shot peening on “Y” shank blades.

Piston Installation SocketPart Number TE Number Description

BST-3067 TE228 Modified socket to install and remove piston on D-6071 and D-494 pitch change rods.

BST-3067+3 TE228-1 Modified socket to install and remove piston on a D-3657 pitch change rod.



Shot Peen PlugPart Number: BST-2939N (TE89)

Description: Plug to mask the blade bore prior to shot peening on “M” and “T” shank blades, with “N” modifications.


Description: Plug to mask the blade bore prior to shot peening on “E” shank blades.




Description: Plug to mask the blade bore prior to shot peening on “W” shank blades.

Shank Protection CapPart Number: BST-2942 (TE13) “T,” “S” and “M” Shanks BST-2943 (TE14) “V,” “MV”, “N” and “X” Shanks BST-2944 (TE15) “W,” “R,” “Z” and “P” Shanks BST-2945 (TE16) “D” and “Y” Shanks

Description: Cap to protect blade shank and bore during shipping and storage. BST-2942 is shown.




Description: Plug to mask the blade bore prior to shot peening on “P” and “Z” shank blades.

Bushing PullerPart Number: BST-2947 (TE101)

Description: Puller to remove A-1347 and A-1309 Bushings. Used in conjunction with customer supplied hydraulic or pneumatic puller.



Bearing PullerPart Number: BST-2948 (TE102)

Description: Puller to remove A-127, A-127-1, and A-1497 bearings. Used in conjuntion with customer supplied hydraulic or pneumatic puller.


Description: Puller to remove bearings from “M,” “S,” “T” and “W” shanks. Used in conjunction with a customer supplied hydraulic or pneumatic puller.

APS-494




Description: Puller to remove bearings from “M” and “T” shanks. Used in conjunction with a customer supplied hydraulic or pneumatic puller.

APS-900


Description: Puller to remove bearings from “D,” “Y” and “V” shanks.

Supersedes: CST-2838



Pitch Angle Stop PlugPart Number: BST-2958 (TE86)

Description: Plug to block the end of the pitch change rod to allow actuation of the propeller on the bench.

Hoist Ring ComboPart Number: BST-2958L (TE62)

Description: Combination tool to lift and move propellers. Also, to seal the end of pitch change rods and actuation of propellers on the bench.



Alignment Check RodPart Number: BST-2959 (TE114)

Description: Rod to check concentricity of the inner threads of the B-3018 or B-1948 Rod.

Supersedes: B-1509

Digital ProtractorPart Number: BST-2960-3 (TE97)

Description: Protractor to measure blade angles. May be used to check angles with propeller installed on engine. Protractor includes protractor case.

Supersedes: BST-2960-1, BST-2960-2, BST-2820, and CST-2880

NOTE: Locally procured and calibrated bubble protractor accurate to within 0.1 degree may be used and is considered equivalent.

Protractor Case

BST-2960 APS0336



Thickness GaugePart Number: BST-2964 (TE61)

Description: Gauge to inspect thickness of 13/4 I.D. on M10876 Blade.





Ream FixtureDescription: Fixture is to locate and drill spinner support plates.

Part Number: Description SupersedesBST-2966 (TE181) C-3733 “A” Flange, 5 Way BT-2723BST-2966-3 (TE182) C-3003-1, 3 Way BST-2836, CT-1472BST-2966-4 (TE183) C-3404, 4 Way CT-1482BST-2966-5 (TE184) C-4011-5, 5 Way BST-2848

Erosion Shield Bonding Clamp Part Number: BST-2974 (TE161) LM10585(A)(N)(B,K)+4 BST-2974-1 (TE162) M10877 BST-2974-2 (TE163) M10083 BST-2974-3 (TE164) B7421 BST-2974-4 (TE165) A10460(E) BST-2974-5 (TE541) B7466 BST-2974-6 (TE542) E11990 BST-2974-7 (TE168) E10950P(C)( ) BST-2974-8 (TE543) E13482 BST-2974-9 (TE544) E12902 BST-2974-10 (TE545) E13890K BST-2974-11 (TE546) ( )7690( )Description: Clamp to prevent wrinkling of fiberglass during erosion shield bonding on

composite blades.


TOOL AND EQUIPMENT LIST 61-00-65 Page 4-39Rev. 16 Apr/14

Fit Check ToolPart Number: BST-2975 (TE171) LM10585AN+4 BST-2975-1 (TE172) M10877 BST-2975-2 (TE173) M10083 BST-2975-3 (TE174) B7421 BST-2975-4 (TE175) A10460E BST-2975-6 (TE177) E11990 BST-2975-7 (TE178) E10950 BST-2975-9 (TE180) E12902 BST-2975-10 (TE340) E13890 BST-2975-11 (TE376) 7690C BST-2975-12 (TE377) 7890K BST-2975-13 (TE378) 7690E BST-2975-14 (TE480) N7605 BST-2975-15 (TE549) E9193 BST-2975-16 (TE481) N7893 BST-2975-17 (TE482) N7605-2 BST-2975-18 (TE483) N7605+2 BST-2975-19 (TE484) N7605-4 BST-2975-20 (TE485) NC9208 BST-2975-21 (TE511) NG8301( ) BST-2975-22 (TE512) NC8834( ) BST-2975-23 (TE513) ( )79(A,B)06( ) BST-2975-24 (TE514) ( )76(A,B)01-2( ) BST-2975-25 (TE515) ( )75(A,B)01-2( )

Description: Tool to check fit of erosion shield before installation on composite blades.



Drill JigPart Number: BST-2982 (TE75)

Description: Drill jig for “N” flange slimsert installation.

Drill JigPart Number: BST-2983 (TE76)

Description: Drill jig for “F” flange slimsert installation.



Alignment Check RodPart Number: BST-2984 (TE115)

Description: Rod to check concentricity of internal threads of D-494 Pitch Change Rod.

Bearing Installation ToolPart Number TE Number Description

BST-2985 TE64 Tool to install the blade alignment bearings in T and M shank blades with N modification. Used in conjunction with customer supplied hydraulic or pneumatic press.

BST-2985-1 TE64-1 Tool to install the blade alignment bearings in R and W shank blades with N modification. Used in conjunction with customer supplied hydraulic or pneumatic press.

BST-2985,-1

BST-2985 BST-2985-1




TemplatePart Number: BST-3004 (TE219) 48 inch station of LM10585 BST-3004-1A (TE220) 42 inch station of M10877 BST-3004-1B (TE221) 52 inch station of M10877 BST-3004-2A (TE222) 39.75 inch station of M10083 BST-3004-2B (TE223) 47.25 inch station of M10083 BST-3004-3A (TE224) 30 inch station of B7421 BST-3004-3B (TE225) 34 inch station of B7421 BST-3004-4A (TE226) 30 inch station of A10460 BST-3004-4B (TE227) 48 inch station of A10460 BST-3004-6A (TE230) 42 inch station of E11990 BST-3004-6B (TE231) 54 inch station of E11990 BST-3004-7A (TE232) 42 inch station of E10950 BST-3004-7B (TE233) 51 inch station of E10950 BST-3004-9A (TE236) 54 inch station of E12902 BST-3004-9B (TE237) 60 inch station of E12902 BST-3004-10A (TE335) 54 inch station of E13890 BST-3004-10B (TE336) 60 inch station of E13890 BST-3004-11A (TE337) 30 inch station of E7690 BST-3004-11B (TE338) 36 inch station of E7690 BST-3004-12A (TE461) 30 inch station of 7890 BST-3004-12B (TE462) 36 inch station of 7890 BST-3004-13A (TE463) 30 inch station of E8190 BST-3004-13B (TE464) 30 inch station of E8190 BST-3004-14A (TE465) 36 inch station of E9193 BST-3004-14B (TE466) 42 inch station of E9193 BST-3004-15A (TE467) 30 inch station of N7605 BST-3004-15B (TE468) 36 inch station of N7605 BST-3004-16A (TE469) 30 inch station of N( )7893 BST-3004-16B (TE470) 36 inch station of N( )7893 BST-3004-19A (TE471) 24 inch station of N7605-4 BST-3004-20A (TE472) 30 inch station of NC9208 BST-3004-20B (TE473) 42 inch station of NC9208 BST-3004-21A (TE521) 30 inch station of NG8301 BST-3004-21B (TE522) 36 inch station of NG8301 BST-3004-22A (TE523) 30 inch station of NC8834 BST-3004-22B (TE524) 36 inch station of NC8834 BST-3004-23A (TE525) 30 inch station of ( )79(A/B)06 BST-3004-23B (TE526) 36 inch station of ( )79(A/B)06 BST-3004-24A (TE527) 30 inch station of ( )76(A/B)01-2 BST-3004-24B (TE528) 36 inch station of ( )76(A/B)01-2 BST-3004-25A (TE529) 30 inch station of ( )75(A/B)01-2 BST-3004-25B (TE530) 36 inch station of ( )75(A/B)01-2

Description: Tool to check stations of composite blades.BST-3004



Thread Insert Removal ToolPart Number: Description:

BST-3019 (TE112) Tool to remove B-1243 threaded staked insert.

BST-3019-3 (TE112-1) Tool to remove B-1243-1 threaded staked insert.



Blade Assembly Support StandPart Number: BST-3024 (TE126)

Description: Stand to support blade in hub during HD-E6C-3 or HC-E4N-3A propeller assembly.



Bearing Press Part Number: BST-3026-1 (TE238) 1.000 inch O.D. BST-3026-2 (TE239) 1.500 inch O.D. BST-3026-3 (TE240) 1.625 inch O.D.

Description: Press used to install bearings into bearing carriers or housings during assembly of HD-E6C-3 propeller or PCU.

Modified CrowfootPart Number: BST-3027 (TE40)

Description: Modified 15/16 inch, 3/8 inch drive crowfoot wrench.




Description: Modified 113/16 inch, 3/8 inch drive crowfoot wrench.


Description: Modified 13/4 inch, 3/8 inch drive crowfoot wrench used during assembly and disassembly of HD-E6C-3 propeller.



Open End WrenchPart Number: BST-3032 (TE143)

Description: Modified 13/4 inch open end wrench.


Description: Modified 17/16 inch crowfoot adapter to remove, install and torque pitch change rod or hydraulic assembly into pitch change fork of HD-E6C-3 propeller. If propeller has been subjected to pitch lock, use BST-3044.



AdapterPart Number: BST-3035 (TE3)

Description: Adapter to remove or install the front bearing nut in the HD-E6C-3 propeller.

Piston Installation ConePart Number: BST-3036 (TE63)

Description: Cone used to compress O-rings and seals installed on PCU servo piston to allow ease of installation into PCU servo column.



Aft Control Spring CompressorPart Number: BST-3037 (TE74)

Description: Tool to be used in conjunction with customer supplied press to push against spacer in order to compress aft spring of HD-E6C-3 propeller. This allows installation of spacer retaining ring.

Control Rod Alignment ToolPart Number: BST-3038 (TE26)

Description: Used to re-align the control rod to control valve in the HD-E6C-3 propeller.




Description: Puller to remove pitch lock bearing and carrier from pitch lock bearing housing of HD-E6C-3 propeller.

Rigging PinPart Number: BST-3041 (TE84)

Description: Rigging pin, 3/16 inch diameter, to hold PCU and CSU power and condition levers in the correct position for rigging. (Two required.)



Clamp WrenchPart Number: BST-3044 (TE141)

Description: Wrench to remove pitch change rod or hydraulic assembly from pitch change fork of HD-E6C-3 propeller after pitch lock.

PullerPart Number: BST-3045 (TE98)

Description: Puller to remove bearings from pitch change brackets, O-ring plugs from extended hub compact propellers, etc.



Threaded Insert Installation ToolPart Number: Description: Supersedes:

BST-3047 (TE68) Tool to install B-1243 threaded staked insert. AT-2422, KHT9000-9

BST-3047-1 (TE68-9) Tool to install B-6143 threaded staked insert.BST-3047-2 (TE68-8) Tool to install B-6143-4 threaded staked insert.BST-3047-3 (TE68-3) Tool to install B-6143-4H threaded staked insert.BST-3047-4 (TE68-4) Tool to install B-6143-5 threaded staked insert.BST-3047-5 (TE68-5) Tool to install B-6143-7 threaded staked insert.BST-3047-6 (TE68-6) Tool to install B-6143-8 threaded staked insert.BST-3047-7 (TE68-7) Tool to install B-6143-8H threaded staked insert.BST-3047-8 (TE68-1) Tool to install B-1243-1 threaded staked insert.

Transfer Tube and Plug Removal/Installation ToolPart Number: BST-3048 (TE320)

Description: Installation of transfer tube and removal of transfer tube and plug in HD-E6C-3 propeller.



Chip Detector FittingPart Number: BST-3050 (TE492)

Description: Chip Detector Fitting used with DST-3049-( ) (TE318) Ground Hydraulic Power Unit.

Chip Detector Fitting CoverPart Number: BST-3051 (TE493)

Description: Cover for BST-3050 Chip Detector Fitting on DST-3049-( ) Ground Hydraulic Power Unit.



PCU Manifold Installation ToolPart Number: BST-3054 (TE72)

Description: Tool used to align and install PCU manifold insert into PCU manifold/servo column.

PCU Bearing Installation ToolPart Number: BST-3055 (TE185) For B-6133-1 Bearing BST-3055-1 (TE186) For B-6133-2 Bearing

Description: Tool used in conjunction with customer supplied press to install roller bearings into PCU manifold.



PCU Bushing Installation ToolPart Number: BST-3056 (TE70)

Description: Tool used in conjunction with customer supplied press to install oil lite bushings into PCU manifold.

PCU Bushing Installation ToolPart Number: BST-3057 (TE71)

Description: Tool used in conjunction with customer supplied press to install oil lite bushings into PCU manifold.



Shot Peen Masking ToolPart Number: BST-3060 (TE118)

Description: Screw to mask 1/2-28 helicoil holes during shot peening.

Screw DriverPart Number: BST-3060-1 (TE46)

Description: Screw driver to drive BST-3060 Screw.



Press ToolPart Number: BST-3061 (TE308)

Description: Used to press split bearings in steel hub propellers.

Supersedes: BT-222-1

Press ToolPart Number: BST-3062 (TE309)

Description: Used to press split bearings in steel hub propellers.

Supersedes: BT-222



BST-3064-2HC-B( )( )( )

BST-3064-3HC-9( )2( )-( )

BST-3064-4HC-A( )( )( )HC-D( )( )( )

BST-3064-5HC-8( )X( )-( )

BST-3064-1

Pilot Tube Installation Tool KitDescription: Tool set contains various spacer adapters. Refer to TE52 for the fixture to

be used with customer procured hydraulic press.

Kit Part Number:

BST-3064 (TE241) BST3064-1 (TE242) can only be used with a hydraulic press that accepts a ram adapter that is 0.75 inch (19.0 mm) diameter by 1.25 inches (31.7 mm) long. For other hydraulic presses, the ram adapter is customer procured.

Kit with the Pilot Tube Installation Tool includes: Components 1 BST-3064-1 (TE242) Pilot Tube Installation Tool

(May be purchased separately.) 2 ...BST-3064-2 (TE243) Pilot Tube Positioner & Stop 3 ...BST-3064-3 (TE244) Pilot Tube Positioner & Stop 4 ...BST-3064-4 (TE245) Pilot Tube Positioner & Stop 5 ...BST-3064-5 (TE246) Pilot Tube Positioner & Stop

Supersedes: B-844

BST-3064A (TE241-1) Kit without the Pilot Tube Installation Tool includes: Components 1 ...BST-3064-2 (TE243) Pilot Tube Positioner & Stop 2 ...BST-3064-3 (TE244) Pilot Tube Positioner & Stop 3 ...BST-3064-4 (TE245) Pilot Tube Positioner & Stop 4 ...BST-3064-5 (TE246) Pilot Tube Positioner & Stop




Chamfering ToolPart Number: BST-5845 (TE50)

Description: A six fluted, 45 degree chamfering tool used to chamfer grease fitting holes in aluminum hubs (reference Hartzell Service bulletin No. 165E or subsequent revision).

Blade Shot Peen Plug Removal ToolPart Number: BST-3065 (TE110)

Description: Tool to remove shot peen plugs.

BST-5845



Transfer Tube O-ring Installation ToolPart Number: BST-10001 (TE69)

Description: Tool to protect O-ring when it is installed over the HD-E6C-3 propeller oil transfer tube.

Beta Valve Freeze SleevePart Number: BST-10002 (TE117)

Description: Installation of beta valve assembly in the PCU.



Modified Deep Well SocketPart Number: BST-10004 (TE251)

Description: Used in the assembly and disassembly of HD-E6C-3 propeller.

Flight Idle Set FixturePart Number: BST-10003 (TE136)

Description: Fixture to set PCU piston indicating rod at the pre-set flight idle position.



Beta Switch TesterPart Number: BST-10005 (TE157)

Description: Test box to simulate the cockpit beta light when rigging the PCU beta light switch during PCU assembly. To be used in conjunction with BST-10006 Rigging Cover.

Rigging CoverPart Number: BST-10006 (TE58)

Description: Cover used to actuate the PCU beta light switch at pre-set position to assist in beta light switch rigging. To be used in conjunction with BST-10005 Beta Light Switch Test Box.

STAND-BY BETA

ON

OFF

BST-10005HARTZELL

BST-10005

BST-10006ABST-10006B




100923

Strap WrenchPart Number: 100923 (TE148-1)

Description: Wrench to install/remove feathering spring.

Supersedes: BT-461 (TE148)

Threaded Headless PinsPart Number: BST-10007 (TE159)

Description: These pins are threaded into the hub's forward mounting ring to hold it in the correct position for:

1) Hydraulic unit mounting during HD-E6C-3 propeller assembly (four required).

2) Cylinder mounting during the HC-E5A-2 propeller assembly (2 required).



APS-189-1

BST-3061 (TE308) or BST-3062 (TE309)to pull bearing retaining ring into position

Retention Bearing PullerPart Number: BT-223 (TE108)

Description: Puller to remove and install bearings on steel hub spiders. Used in conjunction with BST-3061 and BST-3062. Adaptors used as listed.

Adaptors: BT-223+9 (TE108-1) (CS) Adaptor ring used when removing the A-1852 bearing retaining ring.


BT-223+10 (TE108-2) (CS) Adaptor ring used when removing the A-972 bearing retaining ring.


Bearing Retaining Ring

Adaptor BT-223+9 (TE108-1) or BT-223+10 (TE108-2)



Shot Peen Tube AssemblyPart Number: BT-1271-1,2 (TE137)

BT-1271-1 Fine Threads

BT-1271-2 Coarse Threads

Description: Adapter assembly to shot peen blade balance bores. Used with CT-1311 (TE12).

Supersedes: BT-1271 BT-1271-1_2

Shot Peen Gun (TE379) (not included)

Shot Peen Tube Assembly (TE137)

Shot Nozzle Unit (TE494) (not included)

Shot Nozzle UnitPart Number TE Number Length

BT-1271-4 (TE494) 1.95 inches (49.5 mm) BT-1271-5 (TE494-1) 3.34 inches (84.8 mm) BT-1271-6 (TE494-2) 4.72 inches (119.8 mm) BT-1271-7 (TE494-3) 6.10 inches (154.9 mm) BT-1271-8 (TE494-4) 10.10 inches (256.5 mm)

Description: Used with Shot Peen Cabinet CT1311 (TE12), Shot Peen Gun 02643 (TE379), Shot Peen Tube Assembly BT-1271(-1,or-2) (TE137)

Length



Almen Strip FixturePart Number: 104381 (TE49)

Description: Fixture to confirm shot intensity in the lead hole of a blade.

Supersedes: BT-1312TI-165006,7

APS-180A

Shot Peen CabinetPart Number: CT-1311 (TE12) (CS)

Description: This part number may be used to order the drawing of the shot peen cabinet for local fabrication. Cabinet to house and support the blade during lead hole shot peening. Used with BT-1271 (TE137), BT-1312 (TE49), BT-1271-( ) (TE494-[ ])and 02643 (TE379).



Eddy Current Probe UnitDescription: Probe for Eddy Current inspection of blade balance hole.

Part Number: BT-1313 (TE95) No longer available from Hartzell Propeller Inc. Order from vendor (See below)

Superseded by Olympus NDT Inc. Part Number BT-1313(-)( ) (TE95)

Part Number: Olympus NDT Inc. Part Number BT-1313(-)( ) (TE95)

NOTE: There are three versions of the eddy currect probe unit available from Olympus NDT Inc. Refer to the chart.

Supersedes: BT-1313 (Hartzell Part Number)

Vendor: Olympus NDT Inc. (OL)

Probe (included)

Olympus NDT Inc. Part Number Connector Type

BT-1313 1/4" HeadphoneBT-1313-1 MicrodotBT-1313-2 Triax Fischer/Lemo

1/4" Headphone Microdot Triax Fischer/Lemo

Connector Types

Probe Collar (included)

Connector (see chart)

TI-165001,2,3



Floating ReamerPart Number: BT-1465-1 (TE207) 0.766 (19.45 mm) diameter ball nose

BT-1465-3 (TE207-1) 0.758 (19.25 mm) diameter ball nose

BT-1465-2 (TE208) 0.781 (19.83 mm) diameter ball nose BT-1465-4 (TE208-1) 0.773 (19.63 mm) diameter ball nose

Description: Reamer to repair a blade balance hole.

Floating reamer holder not supplied by Hartzell Propeller Inc.




Stop AdapterPart Number: BST-3066-2 (TE311)

Description: Adapter to push pilot tubes deeper into the hub in order to remove with less force.

Peening ToolPart Number: BST-3068 (TE247)

Description: Tool for peening A-2245-(1) bushings in aluminum hubs.



TE315

Eddy Current Probe

APS-2079

3009.TIF

PCU Bearing Seat SanderPart Number: BST-2970 (TE274)

Description: Tool for sanding the O.D. bearing seat surface on Propeller Control Unit.

Eddy Current FixturePart Number: BST-3069 (TE315)

Description: Eddy current probe support fixture for inspecting "X" and "V" shank double shoulder aluminum propeller blades. (Does not include probe. Standard

1/8 inch pencil probe is recommended.)




Drill Jig (PCU)Part Number: BST-3070 (TE296)

Description: Drill jig for removing the PCU manifold plug from Propeller Control Unit.

PCU StandPart Number: BST-3071 (TE297)

Description: Stand for securing Propeller Control Unit during maintenance operations.

BST3071.TIF

BST-3070.ai



Centering Tool for C-5623-2 Drive CouplingPart Number: BT-3035 (TE310)

Description: Tool for aligning the drive coupling in the PCU manifold.

BT3035.TIF

E13890 Master BladePart Number: BST-3200 (TE431) - Group 0 (-100 in. oz.)

BST-10037 (TE299) - Group 1 (-5 in. oz.)

BST-10038 (TE300) - Group 2 (+100 in. oz.)

BST-10039 (TE301) - Group 3 (+180 in. oz.)

102690 (TE460) - Group 4 (+260 in. oz.)

Description: Used to balance composite blades into balance groups. Not shown. The part numbers above may be used to order the drawing of the master blade for local fabrication.



Pitch Lock Roller FixturePart Number: BST-10026 (TE362)

Description: Used to compress A-5654-1 pitch lock unit to facilitate disassembly/assembly.


Description: Modified 1¼ inch, 3/8 inch drive crowfoot wrench used to adjust the pitch lock gap on the HD-E6C-3( ) propeller.




Description: Plug to mask the blade bore prior to shot peening on “X” shank, “X” shank modified to “V” shank, “V” shank, “V” shank blades with “N” modification and “MV” shank blades with “N” modification. Used with TE372 as required.

Shot Peen PlugPart Number: BST-3080-1 (TE372)

Description: Used with TE371 to mask the blade bore prior to shot peening on “V” shank blades with “N” modification and “MV” shank blades with “N” modification.



T-Handle WrenchPart Number: BST-3109 (TE381)

Description: Installation of the stop screw in compact aluminum -2 propellers.

Feathering ToolPart Number: BST-3103 (TE383)

Description: Tool used to install the pitch adjustment washers and feathering stop in compact aluminum -2 propellers.

APS6262

APS6262



Cylinder Installation RodPart Number: BST-3104 (TE384)

Description: Tool used to spread the start lock mechanism when installing the cylinder in compact aluminum feathering propellers.

APS6261

ReamerPart Number: BST-3022 (TE403) - All except Bantam propeller hubs

BST-3022A (TE403-1) - Bantam propeller hubs only

Description: Used to remove adhesive from the bottom of hub mounting stud holes.

BST3022




Description: Plug to mask the blade bore before shot peening “M” and “T” shank blades that do not have “N” modifications.

BST2939


Description: Puller to remove bearings from "E" shanks. Used in conjunction with customer supplied hydraulic or pneumatic puller.

NOTE: Use only with bearings having a cage and a flat bottomed closed end. This puller will not work on bearings with a full complement of needles and a dimpled closed end.

BST2951



Paint Mask CapPart Number: BST-3006 (TE414) diameter of "A" is 5.930 inches (15.06 cm)

BST-3158 (TE415) diameter of "A" is 6.345 inches (16.12 cm) BST-3159 (TE416) diameter of "A" is 5.745 inches (14.59 cm) BST-3160 (TE417) diameter of "A" is 5.370 inches (13.64 cm) BST-3161 (TE418) diameter of "A" is 5.875 inches (14.92 cm) BST-3162 (TE419) diameter of "A" is 5.180 inches (13.16 cm)

Description: Used to mask the cylinder attachment thread area of aluminum hubs.

"A"



SpacerPart Number: BST-2991 (TE420)

Description: Used during assembly for set up of 2-way Hydro-Selective propellers.

BST2991

Mask ScrewPart Number: BST-3081 (TE428)

Description: Screw to mask shot peen from the lubrication fitting hole in an aluminum hub.

BST3081



Blade Pitch FixturePart Number: BST-3226 (TE438)

Description: Tool that attaches to the blade for blade angle check.

Probe Housing ComponentPart Number: BST-3227 (TE437)

Description: Used to support the probe of the profilometer when performing the surface finish inspection in the radius and transition areas of aluminum blade shanks. Used with AST-3475 (TE436), as necessary.

BST-3227

W10448



Blade Seal Alignment ToolPart Number:

BST-3177 (TE440) For four-bladed lightweight turbine propellers

BST-3063 (TE440-1) For five-bladed lightweight turbine propellers

Description: Used during assembly to aid installation of the blade seal. BST3177

Composite Balance Tube PullerPart Number: BST-4114 (TE442)

Description: Tool to remove composite blade balance tube.

BST4114



Grease Seal Pressure Test Tool (Adapter)Part Number: BT-3838 (TE443)

Description: Used with TE382 (DST-3146) Thread Gauge Airflow Kit to perform grease seal pressure test.

NOTE: Use with O-rings C-3317-010-2 and C-3317-08-2, not supplied.BT-3838

Grease Seal Pressure Test ToolPart Number: BT-3838-1 (TE443-1)

Description: Used with TE382 or TE382-1 Thread Gauge Airflow Kit to perform grease seal pressure test.

NOTE: BT-3838-1 (TE443-1) eliminates the need for using both the CST-3117 Probe Assembly and BT-3838 (TE443) to check grease seal pressure.

BT-3838-1A




Pressure Check ToolPart Number: BST-7587 (TE441) ........For K, R, L, and F flange

BST-7587-1 (TE441-1) ..For N flange

BST-7587-2 (TE441-2) ..For Q flange

Description: Used to perform a leak inspection after repair of the pitch change rod bore of an aluminum hub.

NOTE: This part number may be used to order the drawing to allow for local fabrication.

BST-7587

Insert Installation ToolPart Number: BST-7588 (TE445)

Description: Used to provide a location of depth of the flange mounting inserts during the adhesive cure process.

NOTE: This part number may be used to order the drawing to allow for local fabrication.

BST-7588

BST-7587-2



Stud Fixture PlatePart Number: CST-421 (TE487)

Description: A tool used when installing studs in D-flange, F-flange, N-flange, and W-flange hubs to make sure that the studs are set perpendicular to the hub flange.

CST-421

APS-162

Blade Retention Components ClampPart Number: CST-2800 (TE24)

Description: Clamp to hold the blade retention components onto the blade shank for installation into the hub. Designed to fit “D” and “Y” shank blades.



Pilot Tube Assembly Tool (TE242) (*May be purchased separately.)

HydraulicPress Ram

Tool No.BST-3064-( )

(TE243 through TE246, sold separately)

Customer-procured Support Plate

Hub Pilot Tube

Endplate of Pilot Tube FixtureCST-2913

APS197-1

Pilot Tube Press FixturePart Number: CST-2913 (TE52)

Description: Fixture to securely hold the propeller hub during pilot tube installation. The press is customer procured. Press must be capable of generating up to 25 tons of force, have an adjustable press opening height, and at least 3.5 inches (88.9 mm) of stroke.

Supersedes: B-843-2

* TE242 can only be used with a hydraulic press that accepts a ram adapter that is 0.75 inch (19.0 mm) diameter by 1.25 inches (31.7 mm) long. For other hydraulic presses, the ram adapter is customer procured.



APS-545

Spring Compressor FixturePart Number: CST-2914 (TE59)

WARNING: USE EXTREME CAUTION DURING DISASSEMBLY. THE FEATHERING SPRING ASSEMBLY MAY BE PRELOADED TO OVER 2000 POUNDS FORCE.

Description: Fixture to compress the feathering spring sufficiently to allow assembly or disassembly of the spring assembly.

NOTE: This fixture is not to be used on 5 and 6 Way propellers with an “E” or “A” shank. The fixture to be used for “E” shanks is CST-3016 (TE32) and the fixture for “A” shanks is customer supplied.

Supersedes: CSD-4900, C-845-2

The following tooling is required in addition to the CST-2914 Spring Compressor Fixture depending upon the type of Spring Assembly:

Spring Assembly Base Retainer Guide Rod

831-1A BST-2894 (TE488-2) BST-2895 (TE489) BST-2907 (TE490-4)831-2 BST-2890 (TE488) BST-2899 (TE489-3) BST-2905 (TE490-3)831-3 BST-2894 (TE488-2) BST-2895 (TE489) BST-2907 (TE490-4)831-4 BST-2894 (TE488-2) BST-2895 (TE489) BST-2907 (TE490-4)831-5A, B, C BST-2894 (TE488-2) BST-2895 (TE489) BST-2907 (TE490-4)831-6 BST-2894 (TE488-2) BST-2895 (TE489) BST-2907 (TE490-4)831-7 BST-2890 (TE488) BST-2899 (TE489-3) BST-2905 (TE490-3)831-8 BST-2890 (TE488) BST-2895 (TE489) BST-2904 (TE490-2)831-9 BST-2890 (TE488) BST-2899 (TE489-3) BST-2905 (TE490-3)831-10 BST-2890 (TE488) BST-2899 (TE489-3) BST-2905 (TE490-3)831-11 BST-2891 (TE488-1) BST-2899 (TE489-3) BST-2905 (TE490-3)831-12 BST-2890 (TE488) BST-2897 (TE489-2) BST-2902 (TE490)





831-13 BST-2891 (TE488-1) BST-2899 (TE489-3) BST-2905 (TE490-3)831-14 BST-2894 (TE488-2) BST-2895 (TE489) BST-2907 (TE490-4)831-15 BST-2891 (TE488-1) BST-2899 (TE489-3) BST-2905 (TE490-3)831-16 BST-2890 (TE488) BST-2899 (TE489-3) BST-2905 (TE490-3)831-16A BST-2890 (TE488) BST-2899 (TE489-3) BST-2905 (TE490-3)831-17 BST-2890 (TE488) BST-2899 (TE489-3) BST-2905 (TE490-3)831-18 BST-2890 (TE488) BST-2899 (TE489-3) BST-2905 (TE490-3)831-19 BST-2890 (TE488) BST-2895 (TE489) BST-2902 (TE490) 831-20 BST-2894 (TE488-2) BST-2895 (TE489) BST-2903 (TE490-1)831-21 BST-2894 (TE488-2) BST-2896 (TE489-1) BST-2903 (TE490-1)831-22 BST-2890 (TE488) BST-2896 (TE489-1) BST-2902 (TE490)831-23 BST-2894 (TE488-2) BST-2895 (TE489) BST-2902 (TE490)831-23A BST-2890 (TE488) BST-2895 (TE489) BST-2902 (TE490)831-24 BST-2890 (TE488) BST-2895 (TE489) BST-2903 (TE490-1)831-25 BST-2890 (TE488) BST-2895 (TE489) BST-2903 (TE490-1)831-26 BST-2890 (TE488) BST-2895 (TE489) BST-2903 (TE490-1)831-27 BST-2890 (TE488) BST-2895 (TE489) BST-2903 (TE490-1)831-28 BST-2894 (TE488-2) BST-2896 (TE489-1) BST-2904 (TE490-2)831-29 BST-2890 (TE488) BST-2895 (TE489) BST-2904 (TE490-2)831-30 BST-2894 (TE488-2) BST-2895 (TE489) BST-2904 (TE490-2)831-31 BST-2890 (TE488) BST-2895 (TE489) BST-2904 (TE490-2)831-33 BST-2890 (TE488) BST-2895 (TE489) BST-2904 (TE490-2)831-34 BST-2894 (TE488-2) BST-2895 (TE489) BST-2904 (TE490-2)831-35 BST-2891 (TE488-1) BST-2899 (TE489-3) BST-2905 (TE490-3)831-36 BST-2890 (TE488) BST-2895 (TE489) BST-2903 (TE490-1)831-38 BST-2894 (TE488-2) BST-2895 (TE489) BST-2904 (TE490-2)831-39 BST-2894 (TE488-2) BST-2895 (TE489) BST-2904 (TE490-2) 831-40 BST-2894 (TE488-2) BST-2895 (TE489) BST-2904 (TE490-2) 831-41 BST-2890 (TE488) BST-2896 (TE489-1) BST-2902 (TE490) 831-42 BST-2890 (TE488) BST-2896 (TE489-1) BST-2902 (TE490) 831-43 BST-2894 (TE488-2) BST-2896 (TE489-1) BST-2903 (TE490-1)831-44 BST-2890 (TE488) BST-2896 (TE489-1) BST-2903 (TE490-1)831-45 BST-2894 (TE488-2) BST-2895 (TE489) BST-2904 (TE490-2)

Spring Compressor FixturePart Number: CST-2914 (TE59)..... Con’t




Spring Compressor FixturePart Number: CST-2914 (TE59)..... Con’t



831-46 BST-2890 (TE488) BST-2895 (TE489) BST-2903 (TE490-1)831-47 BST-2890 (TE488) BST-2895 (TE489) BST-2902 (TE490) 831-48 BST-2894 (TE488-2) BST-2895 (TE489) BST-2904 (TE490-2) 831-50 BST-2894 (TE488-2) BST-2895 (TE489) BST-2903 (TE490-1)831-51 BST-2894 (TE488-2) BST-2896 (TE489-1) BST-2903 (TE490-1)831-52 BST-2890 (TE488) BST-2899 (TE489-3) BST-2905 (TE490-3)831-53 BST-2894 (TE488-2) BST-2895 (TE489) BST-2907 (TE490-4)831-54 BST-2894 (TE488-2) BST-2896 (TE489-1) BST-2904 (TE490-2) 831-55 BST-2890 (TE488) BST-2896 (TE489-1) BST-2903 (TE490-1)831-56 BST-2890 (TE488) BST-2897 (TE489-2) BST-2902 (TE490) 831-57 BST-2890 (TE488) BST-2895 (TE489) BST-2903 (TE490-1)831-58 BST-2890 (TE488) BST-2896 (TE489-1) BST-2903 (TE490-1)831-59 BST-2890 (TE488) BST-2895 (TE489) BST-2904 (TE490-2)

Balance ArborPart Number: CST-2919 (TE8)

Description: Used to determine the location of the static balance weights on a completed propeller assembly. Used with customer supplied balance units. Works with 2 to 5 bladed propellers with “F,” “K,” “L,” “N” and “R” flanges.

Supersedes: CT-2210 and CSK-155

Includes2 Flanges

CST-2919



Optical Comparator OverlayPart Number: CST-2923 (TE18) “D” and “Y” Shanks CST-2924 (TE19) “X,” “V” and “N” Shanks CST-2925 (TE20) “Z,” “W,” “T” and “S” Shanks CST-2926 (TE21) “M,” “R” and “P” Shanks CST-2989 (TE22) “E” Shank CST-10050 (TE373) "MV" ShanksDescription: A 14 inch (355.6 mm) clear overlay to check the condition and repairability

of an aluminum blade retention radius. Used with customer supplied optical comparator. For the current revision level of each overlay, refer to the Hartzell Aluminum Blade Overhaul Manual 133C (61-13-33).

Blade Retention Components ClampPart Number: CST-2929 (TE25)

Description: Clamp to hold the blade retention components onto the blade shank for installation into the hub. Designed to fit “A” and “E” shank blades, and “N” shank composite blades in lightweight compact hubs.

APS-162



CST-2987 CST-2987+8 CST-2987+9

Beta System PullerPart Number: CST-2987 (TE100)

Supersedes: CST-2834, CST-2834-( )

Description: Puller to compress the beta system on all -3 turbine propellers that uses various types of adapters to gain access to the propeller mounting bolts for propeller removal and installation.

The following replacement components are available individually:

Item Number Part Number Description

1 . . . . . . . . . . . . . CST-2987+8 Finger Adapter 2 . . . . . . . . . . . . . CST-2987+9 Finger Adapter 3 . . . . . . . . . . . . . CST-2987+13 Adapter Nut 4 . . . . . . . . . . . . . CST-2987+7 Threaded Shaft

NOTE: CST-2987 includes items 1 through 4 listed above.

CST-2987+8 (4 pieces included)


CST-2987

CST-2987+13 and




Initial Erosion Shield Sample Program KitPart Number: CST-3000 (TE187) LM10585AN+4

CST-3000-1 (TE188) M10877 CST-3000-2 (TE189) M10083 CST-3000-3 (TE190) B7421 CST-3000-4 (TE191) A10460 CST-3000-6 (TE193) E11990 CST-3000-7 (TE194) E10950 CST-3000-9 (TE196) E12902 CST-3000-10 (TE341) E13890 CST-3000-11 (TE474) 7690 CST-3000-12 (TE476) E8190 CST-3000-15 (TE478) N7605

Description: Kit contains the necessary materials for the initial qualification of a facility to perform erosion shield replacements. The kit includes 4 erosion shields and enough adhesive, fiberglass, vacuum bags, and sealant tape to perform four erosion shield replacements for evaluation.

Supplemental Erosion Shield Sample Program KitPart Number: CST-3000-A (TE342) LM10585AN+4

CST-3000-1A (TE345) M10877 CST-3000-2A (TE346) M10083 CST-3000-3A (TE347) B7421 CST-3000-4A (TE348) A10460 CST-3000-6A (TE349) E11990 CST-3000-7A (TE350) E10950 CST-3000-9A (TE351) E12902 CST-3000-10A (TE352) E13890 CST-3000-11A (TE475) 7690 CST-3000-12A (TE477) E8190 CST-3000-15A (TE479) N7605

Description: Kit contains the necessary materials for the additional qualification of a facility to perform erosion shield replacement of a blade design different than the initial design for which the facility is qualified. The kit includes 1 erosion shield and enough adhesive, fiberglass, vacuum bags, and sealant tape to perform the erosion shield replacement.



Portable Spring CompressorPart Number: CST-3016 (TE32)

Description: Spring compressor for feathering spring assembly during assembly or disassembly of lightweight turbine “E” shank 5 and 6 Way propellers.

Dual Acting Propeller Assembly Table Add-on PackagePart Number: CST-3021 (TE10)

Description: An add-on package compatible with CST-2901(-) propeller assembly tables. Permits the ability to control HD-E6C type propellers. The add-on package includes a mounting bracket, electric actuator, push button control box, BST-2912-10 "C" flange spindle adapter, and the hardware to interface with the propeller. Requires 105-125V AC, 50/60 Hz or 208-245V AC, 50/60 Hz source. Hole drilling and some assembly required.

CST-3021.AI



Dual Acting Propeller Assembly Tool KitPart Number: CST-3028 (TE78)

Description: Tools required for disassembly and reassembly of HD-E6C-3 propeller and PCU.

Qty. Vendor Hartzell P/N Vendor P/N Description

1 HP BST-3027 (TE40) n/a Modified Crowfoot 1 HP BST-3030 (TE41) n/a Modified Crowfoot 1 HP BST-3031 (TE42) n/a Modified Crowfoot 1 HP BST-3033 (TE43) n/a Modified Crowfoot 1 HP BST-3035 (TE3) n/a Adapter 1 HP BST-3036 (TE63) n/a Piston Installation Cone 1 HP BST-3037 (TE74) n/a Aft Control Spring Compressor 1 HP BST-3038 (TE26) n/a Control Rod Alignment Tool 1 HP BST-3039 (TE99) n/a Bearing Puller 2 HP BST-3041 (TE84) n/a Rigging Pin 1 HP BST-3044 (TE141) n/a Clamp Wrench 1 HP BST-3045 (TE98) n/a Puller 1 HP BST-3054 (TE72) n/a PCU Manifold Installation Tool 1 HP BST-3055 (TE185) n/a PCU Bearing Installation Tool 1 HP BST-3055-1 (TE186) n/a PCU Bearing Installation Tool 1 HP BST-3056 (TE70) n/a PCU Bushing Installation Tool 1 HP BST-3057 (TE71) n/a PCU Bushing Installation Tool 1 HP BST-10002 (TE117) n/a Beta Valve Freeze Sleeve 1 HP BST-10003 (TE136) n/a Flight Idle Set Fixture 1 HP BST-10004 (TE251) n/a Deep Well Socket 1 HP BST-10005 (TE157) n/a Beta Light Switch Test Box 1 HP BST-10006 (TE58) n/a Rigging Cover 4 HP BST-10007 (TE159) n/a Threaded Headless Pins 1 SO (TE176) APS351 Adjustable Spanner Wrench, 1/8 Pin 1 BH 9943BLX13 (TE261) BLX 13 Ball Head Hex. Wrench Set 2 LS 9943EN1901 (TE262) EN1 901 Propeller Sling, 1 inch x 3 feet

1 SO 9943FS081 (TE109) GFS081 Socket, 6 Point, ¹/8 inch, 3/8 Drive

1 SO 9943MU121 (TE166) GTMU121 Universal Socket, 12 Point, 3/8 inch, 1/4 Drive 1 SO (TE192) GFC48A Crowfoot Wrench, Open End with Side Lock Hole, 11/2 inch, 3/8 Drive 1 SO (TE202) GSF161 Deep Well Socket, 12 Point, 1/2 inch, 3/8 Drive 1 SO 9943FC012 (TE214) GFC012 Crowfoot Wrench, Open End, 3/8 in 2 SO 994313309 (TE229) GFA4A Socket Driver, 5/32 Hex. Head, 3/8 Drive 1 SO (TE248) GF10M Breaker Bar, 3/8 Drive



Dual Acting Propeller Assembly Tool KitPart Number: CST-3028 (TE78).....Con’t Qty. Vendor Hartzell P/N Vendor P/N Description

1 SO (TE249) GV01820 Open End Wrench, Std Length, 9/16 - 5/8 in

1 SO 994313308 (TE255) GFX1 Extension, 2 inches, 3/8 Drive 1 SO (TE256) GFC60A Crowfoot Wrench, 17/8 inch, 3/8 Drive 1 DM (TE265) M22520/1-01 Beta Light Switch Crimping Tool 1 SO (TE250) PFDH180 Socket, 12 Point, 9/16 inch, 3/8 Drive 1 SO 994313307 (TE253) QJFR275E Adjustable Torque Wrench, 5 to 75 ft-lb, 3/8 Drive 1 SO (TE254) QJR217C Adjustable Torque Wrench, 30 to 200 in-lb, 3/8 Drive 1 SO (TE47) YA484 Tool Box

1 SO 994313306 (TE305) PMF133 0 - 6 inch Dial Calipers 2 AP (TE258) 170-6 Apex Torqset Bit, 1/4 inch, 11/4 Length 1 AP (TE252) 668 Thickness Gauge, Straight Leaves 1 AP (TE259) 1500-P Hand Driver, Replaceable-Bit 4 MC 791800247 (TE260) 90303A247 Nylon Jack Screws 1 LE (TE263) CUTA2810114C Installation & Extraction Tool for Relief Valve 1 LE (TE264) CUTA1870104C Installation & Extraction Tool for Oil Nozzle 1 LE (TE266) CUTA1560203A Lee Plug Installation Tool 1 LE (TE267) CUTA1560103B Lee Plug Extraction Tool 1 LE (TE268) CUTA2180203A Lee Plug Installation Tool 1 LE (TE269) CUTA2180103B Lee Plug Extraction Tool 1 LE (TE270) CUTA2810203A Lee Plug Installation Tool 1 LE (TE271) CUTA2810103B Lee Plug Extraction Tool 1 LE (TE272) CUTA3120203A Lee Plug Installation Tool 1 LE (TE273) CUTA3120103B Lee Plug Extraction Tool 1 LE (TE323) CUTA1250203A Lee Plug Installation Tool 1 LE (TE324) CUTA1250103B Lee Plug Extraction Tool 1 SO (TE257) ASA204A Miniature Pick Set



Dual Acting Line Maintenance Tool KitPart Number: CST-3028-1 (TE79)

Description: Tools required for line maintenance of HD-E6C-3 propeller and PCU.

Qty. Vendor Hartzell P/N Vendor P/N Description

1 HP AST-2877-1 (TE155) n/a Torque Wrench Adapter 1 HP BST-3048 (TE320) n/a Transfer Tube and Plug Removal/Installation Tool 2 HP BST-3041 (TE84) n/a Rigging Pin 1 HP BST-10001 (TE69) n/a Transfer Tube O-ring Installation Tool 2 LS 9943EN1901 (TE262) EN1901 Propeller Sling, 1 inch x 3 feet 1 SO 9943FC012 (TE214) GFC012 Crowfoot Wrench, Open End, 3/8 inch

Dual Acting Line Maintenance Tool Kit (Hartzell Supplied Tools Only)Part Number: CST-3028-2 (TE276)

Description: Tools required for line maintenance of HD-E6C-3 propeller and PCU.

Qty. Hartzell P/N Description

1 AST-2877-1 (TE155) Torque Wrench Adapter 1 BST-3048 (TE320) Transfer Tube and Plug Removal/Installation Tool 2 BST-3041 (TE84) Rigging Pin 1 BST-10001 (TE69) Transfer Tube O-ring Installation Tool



Riser FixtureNo. CT-1075

APS-159-1

Adjustable Riser FixturePart Number: CT-1075 (TE48)

Description: Fixture to allow blade angle measurements during assembly. Used in conjunction with a bench-top protractor.




Cylinder CapPart Number: CST-3110 (TE380)

Description: Cap used with the cylinder when installing the spring assembly in compact aluminum, feathering -2 propellers.

APS-6263

Blade Angle Locating FixturePart Number: CST-2969 (TE413)

Description: Fixture to check blade-to-blade angular difference before final hub assembly.

CST2969A



CST3169

Sleeve Intallation ToolPart Number: CST-3169 (TE427)

Description: Tool for installation of the reverse adjustment sleeve in lightweight turbine propellers.

Ultrasonic Inspection Calibration StandardPart Number: CST-3012 (TE277) Supersedes BST-10009.

Description: Controlled specimen to confirm calibration of ultrasonic test equipment.

CST3012



Calibration StandardPart Number: CST-3015 (TE435)

Description: Calibration standard for 101088 eddy current probe.

CST3015

Bolt Alignment FixturePart Number: CST-3178 (TE448)

Description: Used to align mounting bolts in an E-7369 hub with oversize mounting bolt holes.

CST3178



Propeller Assembly TablePart Number: CST-2901-( ) (TE129)

Description: Table used to assemble/disassemble propellers. May order complete propeller assembly table or contact Hartzell for information to fabricate. The CST-2901 includes the propeller assembly table and the items listed in the chart below.

Anti-rotation Pin Spindle Base

Propeller Assembly Table(Full Size Shown)

Qty Item HPI Part No. Description

1 CST-2901 (TE129) Propeller Assembly Table Full Size

1 CST-2901-1 (TE129) Propeller Assembly Table Short

1 CST-2901-2 (TE129) Propeller Assembly Table Full Size W/ Spindle Base, Anti-Rotation Pin

1 CST-2901-3 (TE129) Propeller Assembly Table Short W/ Spindle Base, Anti-Rotation Pin

1 CST-2901-4 (TE129) Propeller Assembly Table Full Size W/ Building Buck Components

1 CST-2901-5 (TE129) Propeller Assembly Table Short W/ Building Buck Components

1 1 1 1 CST-2901+1 Base, Full Size1 1 1 2 CST-2901-1+1 Base, Short2 2 2 2 2 2 3 79980-HPI-LO Hpi Oval, Hartzell Balde Decal2 2 2 2 2 2 4 CST-2901+3 Hanger1 1 5 BST-2912 (TE125) Building Buck Components

(1) (1) 6 BST-2912-12 (TE127) Mid Pitch Adapter

(1) (1) 7 BST-2912-1 (TE124) Flanged Hub Spindle(1) (1) 8 BST-2912-4 (TE4) Adapter Ring"N" Flange(1) (1) 9 BST-2912-9 (TE2) "A" Flange Adaptor"C" Flange Adaptor(1) (1) 10 BST-2912-10 (TE80) "C" Flange Adaptor(1) (1) 1 1 11 BST-2912+ (TE125-1) Spindle Base(1) (1) 12 BST-2912-13 (TE327) -5 Blade Angle Stop(1) (1) 1 1 13 BST-2912-11 (TE85) Anti Rotation Pin(1) (1) 14 BST-2912-2 (TE122) #20 Spline Spindle(1) (1) 15 BST-2912-3 (TE123) #30 Spine Spindle1 1 1 1 1 1 16 CST-2901-5 Pneumatics




Blade Bearing PressPart Number: DST-2934 (TE93)

Description: Press to install the inboard split bearing races and retaining rings onto single shoulder blades. The press also installs the needle roller bearings inside Y, D, and E shank blade bores.

NOTE: Does not include the hydraulic power unit.

Locator Plate ReferenceBall Size

Use with Bearing Part

NumberDST-2934+1 3/8" C-792-( )

D-7745-( )DST-2934+2 1/2" A-2202-( )

C-7438-( ) C-7075-( ) C-2882-( )




Synchrophaser Check BoxPart Number: DST-10014 (TE23)

Description: Check box to perform functional check of synchrophaser computer and related air frame components.

• BST-3051 (TE493) Chip Detector Fitting Cover

• BST-3050 (TE492) Chip Detector Fitting

NOTE: A return line fitting composed of DST-3049+69, DST-3049 +70, and DST-3049 +7 is provided inside a toolbox that is bolted to the GHPU.

Ground Hydraulic Power Unit (GHPU)Part Number: DST-3049 (TE318) AC, 110 V

DST-3049-1 (TE318) AC, 220 V

DST-3049-2 (TE318) DC, 28 V

Description: Used to change blade angle on the HD-E6C-3 propeller.



APS-925

Hydraulic Press Bed

Fixture No. DT-336 Jaw DT-336+6 (TE53-1) and DT336+7 (TE53-2)that grabs the pilot tube. Refer to chart.

Tool No.BST-2876 (TE107)

Hydraulic Press Ram

APS-197

Pilot Tube Removal FixturePart Number: DT-336 (TE53)

Description: This part number may be used to order the drawing of the pilot tube removal fixture for local fabrication. Fixture to hold the hub during pilot tube removal. Replacement jaws are available. Used with customer procured hydraulic press.

Rolling MachinePart Number: DT-1724-3(TE116) AC, 110 V, 60 Hz Complete Machine

(includes blade fixtures)

DT-1724-70 (TE116) AC, 110 V, 60 Hz Machine only (no blade fixtures)

DT-1724-3(F) (TE116) AC, 220 V, 50 Hz Complete Machine (includes blade fixtures)

DT-1724-70(F) (TE116) AC, 220 V, 50 Hz Machine only (no blade fixtures)

Description: Machine to cold compression roll single shoulder aluminum blade shanks. For operating instructions and adapter listing refer to Hartzell Aluminum Blade Manual 133C (61-13-33).

Jaw Pilot Tube ODDT-336+6 (TE53-1) 1.5xx inch (38xx mm)DT-336+7 (TE53-2) 1.7xx inch (44xx mm)



Bolt Alignment ToolPart Number: DST-10024(1) (TE361)

Description: Used to align A-5989-( ) mounting bolts in a D-6168 hub with oversize mounting bolt holes.

Roller Assembly ToolPart Number: DST-10016 (TE363)

Description: Used to position and align A-5654-11 rollers during assembly of A-5654-1 pitch lock unit.

DST10024TPI-DST-10024-1

DST-10024 DST-10024-1



Go-No-Go GaugePart Number: DST-10025 (TE364)

Description: Used to inspect for deflection of drive tab on B-6428 propeller control unit drive coupling.

APS6144

Pitch Change Bore PlugPart Number Description

DT-2997-4 (TE391) Used to pressure check the pitch change rod bushing on the engine-side of "N" flange hubs. Used with DT-2997-2 (TE390) or DT-2997-8 (TE394).

DT-2997-5 (TE392) Used to pressure check the pitch change rod bushing on the cylinder-side of "N" flange hubs. Used with DT-2997-7 (TE393) or DT-2997-9 (TE429).

NOTE: These part numbers may be used to order the drawings to allow for local fabrication.

APS6265



Pressure Check AdapterPart Number Description

DT-2997-2 (TE390) Adapter to check the pitch change rod bushing on the engine-side of "N" flange aluminum hubs. Used with DT-2997-4 (TE391).

DT-2997-7 (TE393) Adapter to check the pitch change rod bushing on the cylinder-side of aluminum hubs with fine attachment threads. Used with DT-2997-5 (TE392).

DT-2997-8 (TE394) Adapter to check the pitch change rod bushing on the engine-side of "A" flange aluminum hubs. Used with DT-2997-4 (TE391).

DT-2997-9 (TE429) Adapter to check the pitch change rod bushing on the cylinder-side of aluminum hubs with coarse cylinder attachment threads. Used with DT-2997-5 (TE392).

NOTE: These part numbers may be used to order the drawings to allow for local fabrication.

APS6264



Thread Gauge Airflow KitPart Number: DST-3146-( ) (TE382)

Description: Used to inspect the condition of D-5117-1 counterweight clamp threaded holes. Also used to inspect the seal of an assembled propeller.

NOTE: When performing the grease seal pressure test, grease seal pressure test tool TE443 (BT-3838) must be used as adaptor with the CST-3117 Probe Assembly. BT-3838-1 in the DST-3146-1 Kit eliminates the need for an adaptor.

Components: DST-3146 (TE382) 1 ....CST-3117 Probe Assembly 2 ....BST-3118 Flowmeter 3 ....BST-3119 Regulator 4 ....BST-3122 Gauge 5 ....CST-3135 Calibration Block

APS6266

DST-3146-1 (TE382-1) 1A ...BT-3838-1 Probe 2 .....BST-3118 Flowmeter 3 .....BST-3119 Regulator 4 .....BST-3122 Gauge

2

3

4

5

11A



Masking FixturePart Number: DST-3483 (TE444)

Description: Used to mask the pilot tube during the plating process.


DST-3483




Shot Peen Machine AssemblyPart Number: DST-5855(F) (TE446)(WH)

Description: A machine that reapplies the compressive layer to the "F" pitch change knob on "Y" shank blades. The machine consists of one (1) DST-5885-1(F) kit and the drawings needed to allow for local fabrication of the remainder of the machine.

NOTE: DST-5855 is designed for applications using 120V-60 Hz electricity. DST-5855F is designed for use with 50 Hz electric supply along with a voltage transformer.

DST-5855



Shot Peen, "Y" Shank Knob KitPart Number: DST-5855-1(F) (TE447)

Description: Kit consists of one (1) DST-5855+33 Rotation Plate and one (1) DST-5855+34 Top Plate plus the drawings needed to permit local fabrication of a DST-5855(F) Shot Peen Machine Assembly.

NOTE: DST-5855-1 is designed for applications using 120V-60 Hz electricity. DST-5855-1F is designed for use with 50 Hz electric supply.

Rotation Plate DST-5855+33

Top Plate DST-5855+34

DST-5855+33 REV. AHARTZELLSER. NO: 064



Optical ComparatorPart Number: Cust. P/N (TE28)

Description: Optical comparator, customer supplied, to inspect the blade retention radius to determine its acceptability for rework or return to service. Refer to Hartzell Service Manual 133C (61-13-33), Blade Overhaul, for a listing of suppliers and approved part numbers.

PCU Filter Removal ToolPart Number: CG40-4 (TE356) Rod

CG40-7 (TE357) Collet

Vendor: Snap-On Tools Corp. (SO)

Description: Used to remove PCU filter B-5840 from the D-1199-2 propeller control unit.

Rod CG40-4

Collet CG40-7

APS6125



Eddy Current Test InstrumentPart Number: ED-520 (TE133), ED-530 (TE134)

Vendor: Magnaflux Corporation (MF)

Description: Instrument to locate cracks and flaws in non-magnetic material (single shoulder aluminum blade retention radii). Used in conjunction with the following:

AST-2857 (TE94) Probe and Probe Holder for "Y" Shank Blade Inspection

AST-2979 (TE121) Test Specimen for Calibration BST-2847 (TE128) Probe Support BT-1313(-)( ) (TE95) Eddy Current Probe Unit for Blade Balance Hole

Inspection BST-3069 (TE315) Eddy Current Fixture



APS-147

Bench Top Protractor

Riser FixtureNo. CT1075

APS-159-1

Thread Insert Installation ToolPart Number: KHT9000-9 (TE67)

Vendor: ALATEC Products Corporation (AL)

Description: Tool to assist in installing the thread insert into the pre-threaded hole and then aid in driving in the locking tangs.

Superseded by: BST-3047-( ) TE68-( )

Bench Top Blade Angle ProtractorPart Number: Vendors

PE 105 (TE96) Mausner Equipment Company, Inc. (MS)

799200105 (TE96) Hartzell Propeller Inc.

Description: Protractor to measure the blade angles of an assembled propeller while installed on the bench. Used in conjunction with the CT-1075 Riser Fixture.

NOTE: Locally procured and calibrated bubble protractor accurate to within 0.1 degree may be used and is considered equivalent.



APS-173

APS-146

CrowfootPart Number: SC038 (TE33) Crowfoot 13/16 inch SC040 (TE34) Crowfoot 11/4 inch SC042 (TE35) Crowfoot 15/16 inch SC048 (TE36) Crowfoot 11/2 inch SC052 (TE37) Crowfoot 15/8 inch SC056 (TE38) Crowfoot 13/4 inch SC060 (TE39) Crowfoot 17/8 inch

Vendor: Snap-On Tools Corporation (SO)

Description: Used in conjunction with a 1/2 inch square drive torque wrench or breaker bar for propeller assembly and disassembly.

Apex Torqset BitPart Number: 170-1/4 (TE44)

Vendor: APEX Products (AP)

Description: Bit to remove, install and torque self-locking mounting screws.




Slimsert® Installation and Removal Tool

Vendor: Fairchild Fasteners

Part Number Hartzell Part Number Description

SR25W4A (Rosan) MR25W4A (McKinnon) 225-072722 (Acme)

BST-2930-1 (TE389-1) (Supersedes TE314)

Used to install Slimsert®-type threaded inserts into 1/4-20 or 1/4-28 threaded holes


BST-2930-2 (TE389-2) Used to install Slimsert®-type threaded inserts into 7/16-20 threaded holes

SR50W4A (Rosan) MR50W4A (McKinnon) 225-072738 (Acme) or 225-890051 (Acme)


Used to install Slimsert®-type threaded inserts into 1/2-13 or 1/2-20 threaded holes



Used to install Slimsert®-type threaded inserts into 9/16-18 threaded holes



Used to install Slimsert®-type threaded inserts into 10-24 or 10-32 threaded holes



Used to install Slimsert®-type threaded inserts into 8-32 threaded holes


BST-2930-7 (TE389-7) Used to install Slimsert®-type threaded inserts into 3/8-16 or 3/8-24 threaded holes


BST-2930-8 (TE389-8) Used to install Slimsert®-type threaded inserts into 3/8-24 threaded holes


BST-2930-9 (TE389-9) Used to install Slimsert®-type threaded inserts into 10-32 threaded holes


BST-2930-10 (TE389-10) Used to install Slimsert®-type threaded inserts into 8-32 threaded holes

BST-2930



APS-178

APS-144, APS-147

Helicoil Insert Removal ToolVendor: Heli-Coil Division, Emhart Fastening Systems Group (HE)

Description: Tool to remove a helicoil insert.

TE Number Vendor P/N Hartzell P/N

TE111 1227-6 791912276

Helicoil Insert Installation Tool, 7552-4Vendor: Heli-Coil Division, Emhart Fastening Systems Group (HE)

Description: Tool to pre-wind the insert to a smaller diameter for installation into the prethreaded hole.

TE Number Vendor P/N Hartzell P/N

TE66 7552-4 791975524 TE66-1 7552-5 791975525 TE66-2 7552-7 791975527



1 ** See Note below. (TE375) Ultrasonic Flaw Detector 1 PM 23SC Hard-shell Shipping Case 1 PM 21PR Seiko Printer 1 PM 21PP Printer Paper 1 PM 23BAT-12 8 Hour Battery Pack 1 PM M207-RB (Included in TE374) 2.25 MHz Transducer 1 PM DLH-2 (Included in TE374) Delay Tip (Line) 1 PM BCB-58-6 Transducer Cable 1 HP CST-3012 (TE277) Ultrasonic Inspection Calibration Standard

**NOTE: Supplied per approved units as listed in Hartzell Composite Blade Manual 135F (61-13-35), Table 201. Not shown.

Ultrasonic Flaw Detector KitPart Number: 791256000 (TE285)

Description: Instrument to locate flaws in non-magnetic material (composite blade shank area).

Qty. Vendor Vendor P/N Description



RollersPart Number: MR02030 (TE275) Roller, Steel 1½" x 2"

MR01020 (TE328) Roller, Smooth 11/8" x 1/8"

MR10900 (TE329) Roller, Gooseneck 1" x 1/16"

MR05000 (TE330) Roller, Rubber 2"

MR05020 (TE331) Roller, Silicon 15/16" x 1¾"

Vendor: Everhard Products (EP)

Description: Miscellaneous rollers used for installation of propeller de-ice boots.

Composite Blade Repair BlanketsPart Number: HZP161001 (TE302) E10950 Blade Repair Blanket

HZP161002 (TE304) Blade Repair Blanket (4" x 12")

Vendor: BriskHeat Corporation (BR)

Description: Heat blankets which provide accelerated cure time when making repairs to composite blades. TE304 Not shown.

APS2086

MR02030




Heat GunPart Number: HL1802E (TE303)

Vendor: Steinel America (SA)

Description: Heat Gun for heat shrinking tubing around the wire harness of the de-ice boot for the HD-E6C-3( ) propeller assembly and the tubing for wires used in an electrically actuated governor.

Temp-Plate® RecorderPart Number: 240-120F (TE306) Records temperatures from 120°F to 180°F

240-190F (TE307) Records temperatures from 190°F to 220°F

Vendor: Wahl Instruments, Inc. (WI)

Description: Temperature indicating strips to be used when performing composite blade repairs with a blade repair blanket (TE302 or TE304). TE307 Not shown.

TEMPPLTE.TIF

HL1802E



Tie Strap GunPart Number: GS4H (TE332)

Vendor: All Phase Electric Supply Co. (AE)

Description: Device for securing tie straps used on de-ice boots for propeller assembly HD-E6C-3B.

Unfeathering ToolPart Number: 9943HART-001 (TE316)

Vendor: Clay-Groomer Machine Shop, Inc. (CG) or Hartzell Propeller, Inc. (HP)

Description: Tool for unfeathering propeller assembly HC-E4A-3(A,I).

TE316

APS2082

GS4H



Temp-Plate® RecorderPart Number: 240-090F (TE358)

Vendor: Wahl Instruments, Inc. (WI)

Description: Temperature indicating strips to be used when performing a de-ice system static check on the de-ice system used on the HD-E6C-3( ) ( ) propeller.

APS6123

Signal Generator Model 3001Part Number: 90F2312 (TE359)

Vendor: BK Precision (BK)

Description: Provides an output signal to the aircraft Np sensor, allowing the de-ice system to be checked statically.

APS6124



Bransonic CleanerPart Number: 000-951-005 Model B3 (TE370)

Vendor: Branson Ultrasonics Corporation (BN)

Description: Used to clean B-5840 PCU filter prior to reinstallation in D-1199-2 propeller control unit.

Megohm MeterPart Number: Customer P/N (TE354) - A megohm meter meeting the following

requirements: 0-20 megohms at 500V DC or equivalent.

Vendor: Customer Supplied (CS)

Description: Used to measure the ring-to-ring insulation resistance on the A-5635-1 slip ring. Not shown.

BRANSONIC 3

APS6146


Page 4-122Rev. 16 Apr/14


MilliohmmeterPart Number: Customer P/N (TE355) - A milliohmmeter meeting the following

specfications:

RANGE RESOLUTION MAXIMUM TEST NON DRY CIRCUIT TEST CURRENT ACCURACY 1 Year, 18°-28°C ±(%rdg+counts)

PULSED DC

200 mΩ 10 µΩ 100 mA 0.04 + 2 0.04 + 3


Description: Used to measure the bonding resistance of the HD-E6C-3( )( ) propeller. Not shown.

Pin ExtractorPart Number: MS27495R20 (TE369)


Description: Used to disassemble B-5927 electrical connector on D-1199-2 propeller control unit and used for removal of pins on electrical connector for electrically actuated governors

APS6142



Slide HammerPart Number: CG250-9 and CG250-8A (TE365) Slide Hammer, 2 lb.

CG41-11 (TE366) Rod CG41-14 (TE367) Collet, 1/4 inch to 5/16 inch CG41-13 (TE368) Collet, 3/8 inch to 7/16 inch (Not shown)

Vendor: Snap-On Tools Corp. (SO)

Description: TE365 used in conjunction with TE366, and TE367 or TE368 to remove bearings B-6133-1 or B-6133-2 from D-1199-2 propeller control unit.

APS6126

APS6127

APS6128

TE365

TE366

TE367



Ultrasonic Flaw DetectorPart Number: ** See Note below. (TE375)

Description: Instrument to locate flaws in non-magnetic material (composite blade shank area). Not shown.

** NOTE: Supplied per approved units as listed in Hartzell Composite Blade Manual 135F (61-13-35), Table 201. Contact Hartzell Product Support department for written approval of similar equipment.

Transducer AssemblyPart Number: Cust. P/N (TE374)

Vendor: Panametrics, Inc. (PM)

Description: Used in conjunction with Ultrasonic Flaw Detector (TE375) to locate flaws in non-magnetic material (composite blade shank area). Not shown.

Qty. Vendor Vendor P/N Description

1 PM M207-RB 2.25 MHz Transducer 1 PM DLH-2 Delay Line



Gear Inspection WireVendor: Van Keuren (VK)

Part Number Description

0.0525 inch dia. (TE395) Used to inspect the governor control shaft.

0.0620 inch dia. (TE396) Used to inspect the governor rack.

0.0850 inch dia. (TE397) Used to inspect the governor drive shaft gear internal pitch diameter.

0.2634 inch dia. (TE398) Used to inspect the governor idler gear.

0.2700 inch dia. (TE399) Used to inspect the governor drive shaft gear.

0.0962 inch dia. (TE400) Used to inspect the governor idler gear pitch diameter.

0.1400 inch dia. (TE401) Used to inspect the governor idler gear pitch diameter.

0.1480 inch dia. (TE402) Used to inspect the governor drive shaft gear pitch diameter.



Shot Peen GunPart Number: 02643 (TE379)

Vendor: Clemco Industries Corp. (CL)

Description: Tool used to shot peen blade balance holes. Used with BT-1271-1,2 (TE137), (not included), CT-1311 (TE12), and BT-1271(-4, -5, -6, -7,-8) (TE494-4, -5, -6, -7,-8)

Supersedes: HZP-09S#4 (GO)

BT-1271-1_2

Shot Peen Gun (TE379)

Shot Peen Tube Assembly (TE137) (not included)

Shot Nozzle Unit (TE494-( ) (not included)



Eddy Current ProbePart Number: 101088 (TE434) (HP)

Description: Eddy current probe for bearing cavity inspection.

Supersedes: 379-006-430 (TE434) (HK)W10460

No Go GaugePart Number: .2760 Pin Gauge, Minus "Y" Tolerance (TE430)

Vendor: Hemco Corporation (HM)

Description: Used to inspect the C-6066-1 preload plate.

W10418




"E" Shank Potting MoldPart Number: 101736 (TE450)

Description: Used when filling the area of the blade retention radius of the E10950 composite blade to provide sufficient material for cutting a new radius. Used with TE449, TE451, and a customer supplied worm gear hose clamp.

"E" Shank Form ToolPart Number Description

101679 (TE449) Used to cut the retention radius of the E10950 composite blade after potting

105473 (TE449-1) Used to cut E13890 and E9193 composite blades after potting.

Description: Used with TE450 and TE451.

101679

101736



Tube Puller AssemblyPart Number: 101999 (TE452) (CS)

Description: Tool used to pull the balance tube for the N-shank composite blade. This part number may be used to order the drawing of the tube puller assembly for local fabrication. Used with customer supplied press.

Composite E-shank Comparison ChartPart Number: GT-3669 (TE451)

Description: Chart to check condition and repairability of composite blade retention radius. Used in conjunction with a customer supplied optical comparator, TE449, and TE450. NOTE: This is a 14-inch diameter chart.

GT-3669

101999



101923

Plug PullerPart Number: 101781 (TE454)

Description: Tool used to pull the blade plug for the N-shank composite blade. Used with a customer supplied press.

101781

Balance AdapterPart Number: 101923 (TE453)(CS)

Description: Adapter used with the balance arbor for the N-shank composite blade. This part number may be used to order the drawing of the balance adapter for local fabrication. Used with customer supplied blade balancing equipment.



Blade Spud AdapterPart Number: 101932 (TE455)(CS)

Description: Adapter used with the blade spud for the N-shank composite blade. This part number may be used to order the drawing of the balance adapter for local fabrication. Used with a customer supplied blade spud inspection bench.

101932

MandrelPart Number: 103570 (TE456)(CS)

Description: Adapter used with the N-shank composite blade. This part number may be used to order the drawing of the mandrel for local fabrication.

103570



Torque Wrench AdapterPart Number: 101939 (TE457)(CS)

Description: Installation of the hub clamping bolts and nuts in 3-bladed compact propellers with smooth forged hubs. Used with standard 3/8 inch square drive torque wrench. This part number may be used to order the drawing of the torque wrench adapter for local fabrication.

101939

Shot Peen PlugPart Number: 101060 (TE458)

Description: Plug to mask the blade bore before shot peening on "P" shank, "R" shank, "W" shank, and "Z" shank blades with "N" modification.

101060



RingPart Number: 103572 (TE459)

Description: Adapter used with DST-2934 blade bearing press blade to locate and install the retention ring and press the bearings during epoxy bonding for the 103425 composite blade shank. This part number may be used to order the drawing of the ring for local fabrication.

103572

212-8 DriverPart Number: 791911212 (TE486)

Description: Bit to remove, install and torque self-locking screws.



Torque WrenchPart Number: 104287 (TE495)

Description: Used for blade preload of the hovercraft model 103000 assembly. Used with standard 3/8 inch square drive torque wrench This part number may be used to order the drawing of the torque wrench for local fabrication.

104287

Stand AdapterPart Number: 104371 (TE496)

Vendor: Mahr Federal Inc. (MF), part number 2247086

Description: Used with customer procured height stand and drive housing adapter TE497. Customer procured.

104371 (TE496)



Drive Housing AdapterPart Number: 104372 (TE497)


Description: Used with customer procured height stand and stand adapter TE496. Customer procured.

104372 (TE497)

Roughness StandardPart Number: 104374 (TE498)


Description: Used to measure surface finish. Customer procured.

Part Number104374 (TE498)



Crimp ToolPart Number: M22520/37-01 (TE499)


Description: Used to crimp wire splices on the electronic governor. Locally procured.

Calibration StandardPart Number: BST-3076 (TE500)

Description: Test specimen to calibrate an eddy current instrument before its use when inspecting the retention radius of X and V shank blades.

BST-3076

TI-165008



Eddy Current ProbePart Number: BST-3077-1 (TE501)

Description: Standard 0.125 inch diameter pencil probe that has a 200 KHZ frequency. Locally procured.

Fitting WrenchPart Number: 104933 (TE502)

Description: Used for fittings of anti-ice assemblies. This part number may be used to order the drawing of the wrench for local fabrication.

3077-1

104933


Page 4-138Rev. 14 Jun/13



Spacer BlankPart Number: 104811 (TE503)

Description: Used to make custom sized spacer in accordance with the procedure in Hartzell Propeller Inc. Blade Shank Rolling Machine Maintenance Manual 128 (61-00-28).



Bearing Assembly ToolPart Number: 105189 (TE504)

Description: Used to assemble the bearing on Bantam blades. This part number may be used to order the drawing of the bearing assembly tool for local fabrication.

ClampPart Number: 105190 (TE505)

Description: Used to assemble the bearing on Bantam blades. This part number may be used to order the drawing of the clamp for local fabrication.

105189

105190




Leak Check ManifoldPart Number: 104507 (TE506)

Description: Used to perform an assembly leak check before installing the red dye oil in the propeller hub.

AdapterPart Number: 104504 (TE507)

Description: Used to perform an assembly leak check before installing the red dye oil in the propeller hub. Used with 104507 (TE506).

Valve Assembly,B-1938

Air Pressure Gage,

102560-1

Reducer, 104509

Tee, 104508

104507

104504



Check CylinderPart Number: 104798 (TE508)

Description: Used to perform an assembly leak check before installing the red dye oil in the propeller hub for Bantam 5-bladed series propellers. Used with 104507 (TE506) and 104504 (TE507).

104798A

105167

Check CylinderPart Number: 105167 (TE509)

Description: Used to perform an assembly leak check before installing the red dye oil in the propeller hub for 6-bladed Hovercraft propellers. Used with 104507 (TE506) and 104504 (TE507).




Plug AssemblyPart Number: 104506 (TE510)

Description: Used to perform an assembly leak check before installing the red dye oil in the propeller hub for Bantam series propellers.

Plug, 104490

O-Ring, C-3317-006

104506




Double Shoulder Blade Eddy Current KitPart Number: BST-3075 (TE516)

Description: Instruments used to perform eddy current inspection of the double shoulder blade retention radius.

Qty. Vendor P/N Description

1 BST-3069 (TE315) Probe Holder 1 BST-3076 (TE500) Calibration Standard 1 BST-3077-1 (TE501) Eddy Current Probe 1 BST-3078 Teflon Tape 1 BST-3075+1 Protective Case

Calibration StandardBST-3076 (TE500)

Probe HolderBST-3069 (TE315)

Eddy Current ProbeBST-3077-1 (TE501)

3075




Torque Unit AdapterPart Number: 105266 (TE517)

Description: Wrench to tighten and torque mounting bolts on 3-bladed reversing Bantam propellers. Used in conjunction with a standard 1/2 inch drive torque wrench.

NOTE: This part number may be used to order the drawing of the torque wrench adapter to permit local fabrication.

Torque Unit AdapterPart Number: 105269 (TE518)

Description: Wrench to tighten and torque mounting bolts on 3-bladed reversing Bantam propellers. Used in conjunction with a standard 1/2 inch drive torque wrench.

NOTE: This part number may be used to order the drawing of the torque wrench adapter to permit local fabrication.

105266

105269



Hovercraft 5-Way AdapterPart Number: BST-2912-20 (TE519)

Description: Adapter permits mounting of 5-bladed Hovercraft propellers to the CST-2901( ) Propeller Assembly Table. Must be used with the BST-2912-1 Flanged Spindle.

Hovercraft 6-Way AdapterPart Number: BST-2912-21 (TE520)

Description: Adapter permits mounting of 6-bladed Hovercraft propellers to the CST-2901( ) Propeller Assembly Table. Must be used with the BST-2912-1 Flanged Spindle.

BST-2912-20

BST-2912-21




Balance AdapterPart Number: 105274 (TE531)

Description: Adapter used with the balance arbor for the Bantam composite blade. This part number may be used to order the drawing of the balance adapter for local fabrication. Used with the customer supplied blade balancing equipment.

Bantam Blade Spud AdapterPart Number: ** See Note below. (TE532)

Description: Adapter used with the blade spud for the Bantam composite blade. Not shown.

** NOTE: Contact Hartzell Propeller Inc. Product Support department for recommended tooling.

105274.ai



Leak Detector KitPart Number: 102560 (TE533)

Description: Leak Detector Kit is an assembly of a digital pressure gauge, fill valve, fittings, tubing, and a hub connector. Kit is used to inspect the propeller seals with compressed air prior to filling the hub with red dyed oil in accordance with HC-SL-61-273.

102560

105478

97

.65

PS

I

Air Pressure Gauge102560-1 Valve Assembly

B-1938

Barbed Fitting102560-2

Tubing102560-3

Tee Fitting102560-4

Blade Seal ProbeBT-3838-1

O-RingC-3317-010-2

Blade Inspection AdapterPart Number: 105478 (TE534)

Description: Adapter used with the NC8834( ) composite blade.

AlteredBushing Liner105478-2

Spacer105478-4

Hold Down105478-3

Screw

Set Screw

Altered Bushing Liner105478-5r

Frame Unit105478-1

Knob105478-6




Drill JigPart Number: 104052 (TE535)

Description: Drill jig used to repair the dowel pin in the existing N7605(B,K)( ) and N7893( ) composite blades in accordance with HC-SB-61-319.

104052

104052-2Knob Locator

104052-1Base

BST-2912-19A

Hub Flange SpindlePart Number: BST-2912-19 (TE536)

Description: Adapter permits mounting of the H, T, Q, and G Hub Flange propellers to the CST-2901( ) Propeller Assembly Table. Used with TE548 Bantam Spring Compressor.

Anti-rotate Pin (included)



Shank Spacer PullerPart Number: 102516 (TE538)

Description: Tool for engaging the threaded bearing spacer in P, R, P/N, M, T, Z/W, W, M/N, and T/N blades to pull out the spacer and the outboard bearing.

Shank Spacer PullerPart Number: 102515 (TE537)

Description: Tool for engaging the threaded bearing spacer in V, V/N, and MV blades to pull out the spacer and the outboard bearing.

102515

102516




Blade Inspection AdapterPart Number: 105501 (TE539)

Description: Adapter used with the N7605, N7893, and N9208 composite blade. This part number may be used to order the drawing of the adapter for local fabrication.

105501

103454

Preload Stud PlatePart Number: 103454 (TE540)

Description: Used for the 103437 hub at overhaul to re-install the mounting studs properly. Drawing available for local fabrication, not for sale.



Valve Assembly Check ToolPart Number: 105615 (TE547)

Description: Tool to pressure test the internal relief valve contained in the relief valve bolt unit in accordance with HC-SB-61-350. This part number may be used to order the drawing of the valve assembly check tool for local fabrication.

TPI-MB-0022

Cap

Rubber WasherO-ring

Relief Valve Bolt Unit

Housing

Inlet Port for Regulated, Filtered Air

Hole




Bantam Spring CompressorPart Number: 105532 (TE548)

Description: Adapter permits mounting of Bantam propellers to the CST-2901( ) Propeller Assembly Table. Used with TE536 BST-2912-19 Hub Flange Spindle.

NOTE: This part number may be used to order the drawing of the Bantam Spring Compressor to permit local fabrication.

Components: 1 105663 (TE548-1) Extension

2 105664 (TE548-2) Pull Rod

3 105665 (TE548-3) Compression Spring

TPI-165010

1

2

3

illustrated tool and equipment - hartzell...

Documents