ifr-iv integrated field recorder - binary acoustic tech design 2/3 downloads/doc/ifr-iv... ·...

1
Digital Acoustic Processing Binary Acoustic Technology, LLC. iFR-IV integrated Field Recorder Product description: The iFR-IV is an integrated field recording system de- veloped for overnight and extended duration monitor- ing projects. Drawing just 3.2 Watts, the iFR-IV is Binary Acoustic Technologies lowest power recording solution. It is capable of recording up to three days using the internal battery and up to two weeks using a small 40 Ah external car battery. A complete monitoring system can be assembled using a minimum of components. A typical overnight re- cording system consists of an iFR-IV Field Recorder along with an ultrasonic microphone. The system can also be reconfigured into a extended duration recording system by adding, a USB hard drive, and a solar panel. The iFR-IV is a fully weather proof system. It includes an integrated battery system, an embedded microcon- troller, a high speed 16-bit digitizing system and two USB connectors which allow it to control and operate an ultrasonic microphone along with a combination of external USB hard-drives, Compact Flash writers, or USB thumb-drives. Internally, the iFR-IV runs an embedded version of SPECT’R software. It supports an operation timer, the WAVPACK loss-less compressed file format, sleep mode to conserve battery power, and a remote file transfer mode that will automatic transfer recordings back to a specified FTP site. The iFR-IV operates using Binary Acoustic Technolo- gies EXT ultrasonic microphone units. The micro- phone interface supports cable lengths of up to 250 feet. Specifications: Interface: Two (2) USB ports One (1) Ethernet connector One (1) RS-232 console connector One (1) EXT MIC connector One (1) 12V power barrel connector Compatible Accessories: AirLink Raven-X cellular modem AR125 Ultrasonic Receiver Blue Icicle XLR microphone interface LCD Controller USB Thumb-drives USB Compact Flash writer USB enabled external hard drives Power Requirements : +12V @ 3.2W (typ.) iFR-IV with ultrasonic microphone Contact information: Information : [email protected] Sales: [email protected] www.binaryacoustictech.com

Upload: dangphuc

Post on 06-Feb-2018

218 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: iFR-IV integrated Field Recorder - Binary Acoustic Tech design 2/3 Downloads/Doc/iFR-IV... · Digital Acoustic Processing Binary Acoustic Technology, LLC. iFR-IV integrated Field

Digital Acoustic Processing

Binary Acoustic Technology, LLC.

iFR-IV integrated Field Recorder

Product description:

The iFR-IV is an integrated field recording system de-veloped for overnight and extended duration monitor-ing projects. Drawing just 3.2 Watts, the iFR-IV isBinary Acoustic Technologies lowest power recordingsolution. It is capable of recording up to three daysusing the internal battery and up to two weeks using asmall 40 Ah external car battery.

A complete monitoring system can be assembled usinga minimum of components. A typical overnight re-cording system consists of an iFR-IV Field Recorderalong with an ultrasonic microphone. The system canalso be reconfigured into a extended duration recordingsystem by adding, a USB hard drive, and a solar panel.

The iFR-IV is a fully weather proof system. It includesan integrated battery system, an embedded microcon-troller, a high speed 16-bit digitizing system and twoUSB connectors which allow it to control and operatean ultrasonic microphone along with a combination ofexternal USB hard-drives, Compact Flash writers, orUSB thumb-drives.

Internally, the iFR-IV runs an embedded version ofSPECT’R software. It supports an operation timer, theWAVPACK loss-less compressed file format, sleepmode to conserve battery power, and a remote filetransfer mode that will automatic transfer recordingsback to a specified FTP site.

The iFR-IV operates using Binary Acoustic Technolo-gies EXT ultrasonic microphone units. The micro-phone interface supports cable lengths of up to 250feet.

Specifications:

Interface:Two (2) USB portsOne (1) Ethernet connectorOne (1) RS-232 console connectorOne (1) EXT MIC connectorOne (1) 12V power barrel connector

Compatible Accessories:AirLink Raven-X cellular modemAR125 Ultrasonic ReceiverBlue Icicle XLR microphone interfaceLCD ControllerUSB Thumb-drivesUSB Compact Flash writerUSB enabled external hard drives

Power Requirements : +12V @ 3.2W (typ.)

iFR-IV with ultrasonic microphone

Contact information:Information : [email protected]: [email protected]

www.binaryacoustictech.com