Major Update for Enigma2 Boxes

If your receiver says this, Please follow these instructions:

1). EXIT ALL MENUS (PRESS EXIT)

PLEASE NOTE: YOU MAY NEED TO DO

THESE INSTRUCTIONS

MORE THAN ONCE ON OLDER BOXES

2.) PRESS MENU BUTTON ON YOUR REMOTE

3). USING THE ARROW BUTTONS (UP AND DOWN) CHOOSE

SYSTEM PLUGINS AND PRESS OK BUTTON (IT MAY JUST BECALLED PLUGINS ON OLDER BOXES)

4). CHOOSE ACTIVATOR FOR E2 IF NOT ALREADY HIGHLIGHTED.

PRESS OK BUTTON

5). PRESS THE GREEN COLOURED BUTTON ON YOUR REMOTETO ACTIVATE

6). WAIT

7). THE RECEIVER WILL REBOOT AFTER AWHILE

8). WHEN BACK ON. PRESS MENU AND CHOOSE SYSTEM

PLUGINS AND PRESS OK BUTTON

9). USING THE ARROW BUTTONS CHOOSE AUTODARKBOUQUETS

E2 AND PRESS OK BUTTON

10).PRESS GREEN COLOURED BUTTON ON YOUR REMOTE TOSTART

11). PRESS OK TO PERFORM NIT SCAN

12). WAIT

13). AFTER NEARLY A MINUTE YOU SHOULD SEE RELOADINGBOUQUETS AND SERVICES

14). CHECK CHANNELS, SHOULD BE ON

Thanks, Joe