identco - thermal transfer products catalog (asia)
TRANSCRIPT
TTPThermal Transfer ProductsASIA Product Bulletin
Global HeadquartersIDENTCO International Corporation28164 W. Concrete Dr.Ingleside, IL 60041 • USAPhone: +1.815.385.0011www.identco.com
Table of Contents
TTL™ 100 Series - Circuit Board & Electronic Component Labels...............................................02-09
TTL™ 200 Series- Wire & Cable Identification Labels................................................................10-12
TTL™ 300 Series - UL/CSA Nameplate Labels...........................................................................13-15
Environmental Compliance Labels ...............................................................16
Thermal Transfer Resin Ribbons.....................................................................17
1
TTL™ 100 Series
TTL™ 100 Series Material List
Engineered for use on printed circuit boards (PCBs) and electronic components, the TTL™ 100 Series labels endure harsh environments such as high heat, aggressive fluxes, and caustic cleaners commonly used in the manufacturing process. Materials are intended for top-side, bottom-side, or after process identification.
To achieve optimal print quality and UL recognition, IDENTCO’s circuit board and electronic component labels have been thoroughly tested and qualified to match a TTRR™ Series Ribbon. The superior chemical bond between the label and the ribbon provides permanent component identification.
Highlights• Endures Harsh Manufacturing Environments• Renders Lifelong Identification
Features• Thermal Transfer Printable• Top-side, Bottom-side, or After Process Identification
Quality Endorsements• UL Recognized Label and Ribbon Combination*• RoHS Compliant• ISO Certified
Materials TT700 - White Polyester TT462 - White Polyimide TT461 - White Polyimide TT411 - Tan Polyimide TT433 - White Polyimide
Circuit Board & Electronic Component Labels
*UL recognitions are contingent upon printing with the appropriate TTRR™ ribbon and IDENTCO material combination specified in testing by Underwriters Laboratories.
IDENTCO UL Approved
TT700 TTRR-B,D
TT462 TTRR-B
TT461 TTRR-B
TT411 TTRR-AK
TT433 TTRR-CR
* UL Recognition is contingent upon matching / printing with the appropriate IDENTCO Material & Ribbon combination recognized by UL
- 40 °F to 500 °F - 40 °C to 260 °C
- 40 °F to 500 °F - 40 °C to 260 °C
White
Color
White
Tan
White
White
Agency Approval
- 40 °F to 300 °F - 40 °C to 149 °C
Temperature Range
- 40 °F to 500 °F - 40 °C to 260 °C
- 40 °F to 500 °F - 40 °C to 260 °C
Polyimide
Polyimide
Polyimide
Material Description
Super Solvent Resistant Polyimide for PCBA & High Temp. Applications.
Matte tan polyimide film or PCBA & high temperature applications.
Low profile (1 mil) glossy white polyimide for PCBA & high temperature applications.
Glossy white polyimide film for PCBA & high temperature applications.
Glossy white polyester film used for PCBA, Component ID, & Rating Plates.
Polyimide
Polyester
PENDING
UL
UL
UL
UL
2
Label Reference GuideTECHNICAL DIAGRAM OF STANDARD LABEL DIMENSIONS AND TERMS
VERTICAL REPEAT (VR)
HORIZONTAL REPEAT (HR)
WEB WIDTH
CORNERRADIUS (CR)
EDGE TRIM
HEIGHT (H)
WIDTH (W)
WIDTH (W) • Horizontal measurement from left to right of label.
HEIGHT (H) • Vertical measurement from top to bottom of label.
VERTICAL REPEAT (VR) • Vertical measurement from the top of the label to the top of the next label.
HORIZONTAL REPEAT (HR) (2 or more across) • Horizontal measurement from the left edge of the label to the left edge of the next label. • Applies only to multiple across layouts.
WEB • Horizontal measurement of the liner.
CORNER RADIUS (CR) • Measurement of label corner—use corner measurement tool. • Standard = 0.0625” (1.59mm) • 0.0156” (0.40mm) is the minimum to be used.
EDGE TRIM: • Horizontal measurement from edge of liner to first label. • Measurement is taken from both ends of liner.
EXPLODED VIEW OF LABEL
TOPCOAT:
• Glossy
• Matte
FACESTOCK:
• Polyester • Polyimide • Polypropylene
• Polycarbonate • Vinyl • Polyvinylflouride
• Polyethylene • Paper
ADHESIVE:
• Permanent
• Removable
LINER:
• Hand apply
• Auto-apply
Part Number DescriptionTTL140-462-10
Size Material Quantity/Roll (10,000)3
TTL™ 100 Part Number List
4.318 3.30 TTL - 140 5 10,000 38.10 7.62 11.11 0.76 (x2) 2.54 *6.35 6.35 TTL - 100 12 10,000 81.28 6.35 9.52 1.57 2.54 *6.35 6.35 TTL - 124 8 10,000 53.97 6.35 9.52 1.58 1.58 *6.35 6.35 TTL - 148 7 10,000 63.50 8.89 9.52 1.58 1.906.86 6.86 TTL - 113 5 10,000 63.50 12.70 12.70 1.58 2.927.62 5.08 TTL - 139 5 10,000 63.50 10.16 7.62 1.58 2.547.93 7.93 TTL - 111 5 10,000 63.50 12.70 12.70 2.38 2.368.00 8.00 TTL - 146 8 10,000 83.31 9.90 10.32 1.58 2.989.52 9.52 TTL - 116 7 10,000 81.28 11.11 12.70 1.58 2.549.53 9.53 TTL - 125 4 10,000 50.80 12.70 12.7 1.58 1.58
11.405 3.98 TTL - 145 6 25,000 74.67 11.40 6.98 0.76 3.12 *12.70 6.35 TTL - 101 5 10,000 76.20 15.24 12.70 1.58 1.2712.70 11.125 TTL - 112 5 10,000 85.09 16.81 14.28 1.58 2.5412.70 5.08 TTL - 121 5 10,000 81.28 15.87 7.62 1.58 2.5412.70 5.08 TTL - 126 4 10,000 63.50 15.87 7.62 1.58 1.5812.70 11.125 TTL - 127 3 10,000 85.09 16.81 14.28 1.58 2.5415.24 6.35 TTL - 137 1 10,000 21.59 15.24 11.43 1.58 2.5416.51 5.08 TTL - 102 4 10,000 74.93 17.78 9.52 0.79 2.5416.51 5.08 TTL - 128 2 10,000 40.64 20.32 9.52 1.58 1.9016.51 5.08 TTL - 136 1 10,000 21.59 16.51 7.62 1.58 1.5817.78 9.53 TTL - 122 4 10,000 80.01 19.05 12.06 1.58 2.5419.05 6.35 TTL - 103 4 10,000 85.09 20.32 9.52 1.58 2.5419.05 19.05 TTL - 123 4 10,000 85.09 20.32 22.19 1.58 2.5419.05 6.35 TTL - 129 1 10,000 22.225 19.05 9.52 1.58 1.5819.05 6.35 TTL - 141 4 10,000 85.09 21.59 9.52 0.76 3.0422.86 6.35 TTL - 104 3 10,000 85.09 28.57 9.52 1.58 2.5422.86 6.35 TTL - 130 1 10,000 27.94 22.86 9.52 1.58 1.5825.40 9.53 TTL - 105 3 10,000 85.09 27.30 12.70 1.58 2.5425.40 12.70 TTL - 106 3 10,000 85.09 27.30 15.87 1.58 2.5425.40 9.53 TTL - 131 1 10,000 32.39 25.40 12.7 1.58 3.4925.40 6.35 TTL - 135 1 10,000 28.57 25.40 9.52 1.58 1.5825.40 25.40 TTL - 144 3 10,000 87.37 27.94 28.57 1.58 3.1225.40 12.70 TTL - 147 1 10,000 30.48 25.40 15.87 1.58 2.5427.94 9.65 TTL - 138 2 10,000 63.50 30.48 12.70 1.58 2.5431.75 6.35 TTL - 118 2 10,000 69.85 33.02 9.52 1.58 2.5431.75 6.35 TTL - 134 1 10,000 36.83 31.75 8.89 1.58 2.5431.75 9.53 TTL - 149 2 10,000 69.85 33.02 12.70 1.52 2.5438.10 6.35 TTL - 114 2 10,000 85.09 41.91 5.71 1.58 2.5438.10 3.18 TTL - 115 2 10,000 85.09 41.91 6.35 0.78 2.5438.10 12.70 TTL - 119 2 10,000 85.09 41.91 15.87 1.58 2.5438.10 6.35 TTL - 132 1 10,000 43.18 38.10 8.89 1.58 2.5438.10 3.18 TTL - 133 1 10,000 43.18 38.10 5.71 0.79 2.5444.45 6.35 TTL - 107 1 10,000 48.26 44.45 9.52 1.58 1.9050.80 9.53 TTL - 109 1 10,000 53.34 50.80 12.7 1.58 1.2750.80 6.35 TTL - 117 1 10,000 55.88 50.80 9.52 0.78 2.5450.80 12.70 TTL - 120 1 10,000 53.97 50.80 15.87 1.58 1.5876.20 7.93 TTL - 110 1 10,000 79.37 76.20 12.7 1.58 1.58
Width (W) Height (H)IDENTCOTTL™ Series
Labelsacross
QuantityRoll
Web Width
CornerRadius (CR)
EdgeTrim
HorizontalRepeat (HR)
VerticalRepeat (VR)
* Kiss cut / Buttcut labels
4
Edge Trim.10”
CR .062”
0.250”6.350 mm
0.250” HR6.350 mm
0.250”6.350 mm
0.375” VR9.525 mm
3.200” Web81.280 mm
Edge Trim.10”
CR .0312”
0.650”16.510 mm
0.700” HR17.780 mm
0.200”5.080 mm
0.375” VR9.525 mm
2.950” Web74.930 mm
Edge Trim.10”
CR .0625”
0.900”22.860 mm
1.125” HR28.575 mm
0.375” VR9.525 mm
3.350” Web85.090 mm
0.250”6.350 mm
Edge Trim.10”
CR .0625”
1.000”25.400 mm
1.075” HR27.305 mm
0.500”12.700 mm
0.625” VR15.875 mm
3.350” Web85.090 mm
Edge Trim.05”
CR .0625”
2.000”50.800 mm
0.375”9.525 mm
0.500” VR12.700 mm
2.100” Web53.340 mm
Edge Trim.05”
CR .0625”
0.500”12.700 mm
0.600” HR15.240 mm
0.500” VR12.700 mm
0.250”6.350 mm
3.000” Web76.200 mm
Edge Trim.10”
CR .0625”
0.750”19.050 mm
0.800” HR20.320 mm
3.350” Web85.090 mm
0.375” VR9.525 mm
0.250”6.350 mm
Edge Trim.10”
CR .0625”
1.000”25.400 mm
1.075” HR27.305 mm
0.500” VR12.700 mm
3.350” Web85.090 mm
0.375”9.525 mm
Edge Trim.075”
CR .0625”
1.750”44.450 mm
0.250”6.350 mm 0.375” VR
9.525 mm
1.900” Web48.260 mm
Edge Trim.0625”
CR .0625”
3.000”76.200 mm
0.313”7.950 mm 0.500” VR
12.700 mm
3.125” Web79.375 mm
TTL100
TTL102
TTL104
TTL106
TTL109
TTL101
TTL103
TTL105
TTL107
TTL110
6.35mm x 6.35mm
16.51mm x 5.08mm
22.86mm x 6.35mm
25.4mm x 12.7mm
50.8mm x 9.53mm
12.7mm x 6.35mm
19.05mm x 6.35mm
25.4mm x 9.53mm
44.45mm x 6.35mm
76.2mm x 7.95mm
5
Edge Trim.09375”
CR .09375”
0.313”7.950 mm
0.500” HR12.700 mm
0.313”7.950 mm 0.500” VR
12.700 mm
2.500” Web63.500 mm
Edge Trim.115”
CR .0625”
0.270”6.858 mm
0.270”6.858 mm
0.500” HR12.700 mm
0.500” VR12.700 mm
2.500” Web63.500 mm
Edge Trim.10”
CR .031”
1.500”38.100 mm0.125”
3.175 mm
1.650” HR41.910 mm
0.250” VR6.350 mm
3.350” Web85.090 mm
Edge Trim.10”
CR .031”
2.000”50.800 mm
0.250”6.350 mm 0.375” VR
9.525 mm
2.200” Web55.880 mm
Edge Trim.10”
CR .0625”
1.500”38.100 mm
1.650” HR41.910 mm
0.500”12.700 mm
0.625” VR15.875 mm
3.350” Web85.090 mm
Edge Trim.10”
CR .0625”
0.500”12.700 mm
0.662” HR16.815 mm
0.4375”11.125 mm
0.5625” VR14.288 mm
3.350” Web85.090 mm
Edge Trim.10”
CR .0625”
1.500”38.100 mm
1.650” HR41.910 mm
0.250”6.350 mm 0.375” VR
9.525 mm
3.350” Web85.090 mm
Edge Trim.10”
CR .0625”
0.375”9.525 mm
0.4375” HR11.113 mm
0.375”9.525 mm
0.500” VR12.700 mm
3.200” Web81.280 mm
Edge Trim.10”
CR .0625”
1.250”31.750 mm
1.300” HR33.020 mm
0.250”6.350 mm 0.375” VR
9.525 mm
2.750” Web69.850 mm
Edge Trim.0625”
CR .0625”
2.000”50.800 mm
0.500”12.700 mm
0.625” VR15.875 mm
2.125” Web53.975 mm
TTL111
TTL113
TTL115
TTL117
TTL119
TTL112
TTL114
TTL116
TTL118
TTL120
7.95mm x 7.95mm
6.858mm x 6.858mm
38.1mm x 3.175mm
50.8mm x 6.35mm
38.1mm x 12.7mm
12.7mm x 11.125mm
38.1mm x 6.35mm
9.52mm x 9.52mm
31.75mm x 6.35mm
50.8mm x 12.7mm
6
Edge Trim.10”
CR .0625”
0.500”12.700 mm
0.625” HR15.875 mm
0.300” VR7.620 mm
0.200”5.080 mm
3.200” Web81.280 mm
Edge Trim.10”
CR .0625”
0.750”19.050 mm
0.800” HR20.320 mm
0.750”19.050 mm
0.875” VR22.225 mm
3.350” Web85.090 mm
Edge Trim.0625”
CR .0625”
0.375”9.525 mm
0.375”9.525 mm
0.500” HR12.700 mm
0.500” VR12.700 mm
2.000” Web50.800 mm
Edge Trim.10”
CR .0625”
0.500”12.700 mm
0.662” HR16.815 mm
0.4375”11.125 mm
0.5625” VR14.288 mm
2.024” Web51.410 mm
Edge Trim.0625”
CR .0625”
0.750”19.050 mm
0.250”6.350 mm 0.375” VR
9.525 mm
0.875” Web22.225 mm
Edge Trim.10”
CR .0625”
0.700”17.780 mm
0.750” HR19.050 mm
0.375”9.525 mm
0.475” VR12.065 mm
3.150” Web80.010 mm
Edge Trim.0625”
CR .0625”
0.250”6.350 mm
0.250” HR6.350 mm
0.250”6.350 mm 0.375” VR
9.525 mm
2.125” Web53.975 mm
Edge Trim.0625”
CR .0625”
0.500”12.700 mm
0.625” HR15.875 mm
0.200”5.080 mm 0.300” VR
7.620 mm
2.500” Web63.500 mm
Edge Trim.075”
CR .0625”
0.650”16.510 mm
0.800” HR20.320 mm
0.200”5.080 mm 0.375” VR
9.525 mm
1.600” Web40.640 mm
Edge Trim.0625”
CR .0625”
0.900”22.860 mm
0.250”6.350 mm 0.375” VR
9.525 mm
1.10” Web25.929 mm
TTL121
TTL123
TTL125
TTL127
TTL129
TTL122
TTL124
TTL126
TTL128
TTL130
12.7mm x 5.08mm
19.05mm x 19.05mm
9.53mm x 9.53mm
12.7mm x 11.125mm
19.05mm x 6.35mm
17.78mm x 9.53mm
6.35mm x 6.35mm
12.7mm x 5.08mm
16.51mm x 5.08mm
22.86mm x 6.35mm
7
Edge Trim.0625”
CR .0625”
1.000”25.400 mm
0.375”9.525 mm
0.500” VR12.700 mm
1.275” Web32.385 mm
Edge Trim.10”
CR .0312”
1.500”38.100 mm0.125”
3.175 mm 0.225” VR5.715 mm
1.700” Web43.180 mm
Edge Trim.0625”
CR .0625”
1.000”25.400 mm
0.250”6.350 mm 0.375” VR
9.525 mm
1.125” Web28.575 mm
Edge Trim.10”
CR .0625”
0.600”15.240 mm
0.250”6.350 mm 0.450” VR
11.430 mm
0.850” Web21.590 mm
Edge Trim.10”
CR .0625”
0.300”7.620 mm
0.400” HR10.160 mm
0.200”5.080 mm 0.300” VR
7.620 mm
2.500” Web63.500 mm
Edge Trim.10”
CR .0625”
1.500”38.100 mm
0.250”6.350 mm 0.350” VR
8.890 mm
1.700” Web43.180 mm
Edge Trim.10”
CR .0625”
1.250”31.750 mm
0.250”6.350 mm
0.350” VR8.890 mm
1.450” Web36.830 mm
Edge Trim.0625”
CR .0625”
0.650”16.510 mm
0.200”5.080 mm 0.300” VR
7.620 mm
0.85” Web21.590 mm
Edge Trim.10”
CR .0625”
1.100”27.940 mm
0.380”9.652 mm
1.200” HR30.480 mm
0.500” VR12.700 mm
2.500” Web63.500 mm
Edge Trim.065”
CR .03” (x2)
0.17”4.318 mm
0.300” HR7.620 mm
0.13”3.302 mm 0.4375” VR
11.113 mm
1.5” Web38.100 mm
TTL131
TTL133
TTL135
TTL137
TTL139
TTL132
TTL134
TTL136
TTL138
TTL140
25.4mm x 9.53mm
38.1mm x 3.175mm
25.4mm x 6.35mm
15.24mm x 6.35mm
7.62mm x 5.08mm
38.1mm x 6.35mm
31.75mm x 6.35mm
16.51mm x 5.08mm
27.94mm x 9.652mm
4.318mm x 3.302 mm
8
Edge Trim.12”
CR .03”
0.750”19.050 mm
0.850” HR21.590 mm0.250”
6.350 mm 0.375” VR9.525 mm
3.540” Web89.916 mm
Edge Trim.123”
CR .03”
0.449”11.405 mm
0.449” HR11.405 mm
0.157”3.988 mm 0.275” VR
6.985 mm
2.94” Web74.676 mm
Edge Trim.10”
CR .0625”
1.000”25.400 mm
0.500”12.700 mm
0.625” VR15.875 mm
1.200” Web30.480 mm
Edge Trim.10”
CR .06”
1.25”31.750 mm
1.3” HR33.020 mm
.375”9.525 mm
.50” VR12.700 mm
2.750” Web69.850 mm
Edge Trim.12”
CR .06”
1.000”25.400 mm
1.100” HR27.940 mm
1.000”25.400 mm 1.125” VR
28.575 mm
3.440” Web87.376 mm
Edge Trim.1175”
CR .06”
.315”8.001 mm
.39” HR 9.906 mm
.315”8.001 mm
3.280” Web83.312 mm
.406” VR10.320 mm
Edge Trim.075”
CR .062”
0.25”6.350 mm
0.350” HR8.890 mm
.25”6.350 mm .375” VR
9.525 mm
2.500” Web63.500 mm
TTL141
TTL145
TTL147
TTL149
TTL144
TTL146
TTL148
19.05mm x 6.35mm
11.405mm x 3.98mm
25.4mm x 12.7mm
31.75mm x 9.53mm
25.4mm x 25.4mm
8.0mm x 8.0mm
6.35mm x 6.35mm
9
TTL™ 200 Series
Designed for cables and wire identification, the TTL™ 200 Series also works on other surfaces requiring conformability. IDENTCO’s universal “site-hole” technology allows virtually any thermal transfer printer to print clear self-laminating labels accurately with minimal waste.
IDENTCO’s wire and cable labels have been thoroughly tested and qualified to match the TTRR™-A ribbon. Combining the wire and cable labels with the TTRR™-A ribbon promises optimal print quality, UL recognition and lifelong product labels.
Highlights• Excellent Product Conformability• Universal “Site-Hole” Technology
Features• Thermal Transfer Printable • Self-laminating Vinyl Film• Custom Sizes, Colors and Formats
Quality Endorsements• UL Recognized Label and Ribbon Combination*• RoHS Compliant • ISO Certified
MaterialsTT727
Wire & Cable Identification Labels
*UL recognitions are contingent upon printing with the appropriate TTRR™ ribbon and IDENTCO material combination specified in testing by Underwriters Laboratories.
IDENTCO UL Approved
TT727 TTRR-A
* UL Recognition is contingent upon matching / printing with the appropriate IDENTCO Material & Ribbon combination recognized by UL
- 40 °F to 158 °F - 40 °C to 70 °C
DescriptionMatte white / transparent conformable vinyl film for wire & cable identification labels.
ColorMaterial
Vinyl White / Clear UL
Agency Temperature Range
TTL™ 200 Series Part Number & Material ListWidth (W) Height (H)
IDENTCOTTL™ Series
Labelsacross
QuantityRoll
Web Width
CornerRadius (CR)
EdgeTrim
HorizontalRepeat (HR)
VerticalRepeat (VR)
12.70 23.90 6 10,000 TTL - 209 93.98 15.24 31.75 1.58 2.5412.70 36.50 5 10,000 TTL - 200 85.09 16.82 42.86 1.58 2.5419.05 23.80 4 10,000 TTL - 207 85.09 20.32 30.16 1.58 2.5420.32 36.50 4 10,000 TTL - 201 85.09 20.32 42.86 1.58 1.9025.40 38.10 3 7,500 TTL - 205 83.82 25.40 44.45 1.58 3.8125.40 57.20 3 5,000 TTL - 202 83.36 27.94 63.50 1.58 2.5425.40 95.30 3 3,500 TTL - 203 83.36 27.94 101.60 1.58 2.5448.26 151.00 2 1,000 TTL - 208 105.15 50.80 158.75 1.58 3.1750.80 36.50 2 2,500 TTL - 210 107.95 50.80 42.86 1.58 3.1750.80 57.20 1 1,000 TTL - 204 54.61 50.80 63.50 1.58 1.9050.80 95.30 1 1,000 TTL - 206 55.88 50.80 101.60 1.58 2.54
10
Edge Trim.075”
CR .0625”
1.4375”36.513 mm
.80”20.320 mm
.50”
.0625”
.0625”.125”
.125”
.80” HR20.320 mm
1.6875” VR42.863 mm
3.35” Web85.090 mm
Edge Trim.10”
1.0”
CR .0625”
.0625”
.0625”.125”
.125”
1.0”25.400 mm
1.1” HR27.940 mm
3.75”95.250 mm 4.0” VR
101.600 mm
3.4” Web86.360 mm
Edge Trim.15”
.50”
CR .0625”
.0625”
.0625”.125”
.125”
1.0”25.400 mm
1.0” HR25.400 mm
1.5”38.100 mm 1.75” VR
44.450 mm
3.3” Web83.820 mm
Edge Trim.10”
.50”
CR .0625”
0.500”12.700 mm
.0625”.125”
.125”
.0625”
0.663” HR16.828 mm
1.4375”36.513 mm 1.6875” VR
42.863 mm
3.35” Web85.090 mm
Edge Trim.10”
CR .0625”
.0625”
.0625”.125”
.125”
1.0”25.400 mm
.75”
1.1” HR27.940 mm
2.25”57.150 mm 2.5” VR
63.500 mm
3.4” Web86.360 mm
Edge Trim.075”
.75”
CR .0625”
.0625”
.0625”.125”
.125”
2.0”50.800 mm
2.25”57.150 mm 2.5” VR
63.500 mm
2.15” Web54.610 mm
TTL200
TTL202
TTL204 TTL205
TTL201
TTL203
12.7mm x 36.513mm
25.4mm x 57.15mm
50.8mm x 57.15mm 25.4mm x 38.1mm
20.320mm x 36.513mm
25.4mm x 95.25mm
11
Edge Trim.10”
.375”
CR .0625”
.0625”
.0625”.125”
.125”
.75”19.050 mm
.80” HR20.320 mm
0.9375”23.813 mm 1.1875” VR
30.163 mm
3.35” Web85.090 mm
Edge Trim.12”
.50”
CR .0625”
.0625”
.0625”.125”
.125”
.50”12.700 mm
.60” HR15.240 mm
.94”23.876 mm 1.25” VR
31.750 mm
3.7” Web93.980 mm
Edge Trim.10”
1.0”
CR .0625”
.0625”
.0625”.125”
.125”
2.0”50.800 mm
3.75”95.250 mm 4.0” VR
101.600 mm
2.2” Web55.880 mm
Edge Trim.12”
.375”
CR .0625”
.0625”
.0625”.125”
.125”
1.9”48.260 mm
2.0” HR50.800 mm
5.94”150.876 mm 6.25” VR
158.750 mm
4.14” Web105.156 mm
Edge Trim.125”
.50”
CR .062”
.0625”
.0625”.125”
.125”
2.0”50.800 mm
2.0” HR50.800 mm
1.4375”36.513 mm 1.6875” VR
42.863 mm
4.25” Web107.950 mm
TTL206
TTL208
TTL210
TTL207
TTL209
50.8mm x 95.25mm
48.26mm x 150.876mm
50.8mm x 36.513mm
19.05mm x 23.813mm
12.7mm x 23.876mm
12
*UL / CSA recognitions are contingent upon printing with the appropriate TTRR™ ribbon and IDENTCO material combination specified in testing by Underwriters Laboratories and/or CSA.
TTL™ 300 Series
TTL™ 300 Series labels provide a cost-effective variety of nameplates, rating plates or instructional labels constructed from UL/CSA recognized materials. The label materials require a smooth surface. (For powder coated surfaces, please contact an Application Engineer who can make recommendations on alternative materials.)
To achieve optimal print quality and UL recognition, IDENTCO’s TTL™ 300 Series labels have been thoroughly tested and qualified to match a TTRR™ Series Ribbon. The exceptional bond between the label material and the ribbon provides lifelong product identification.
Highlights• Economical Nameplates, Rating Plates and Instructional Labels• Lifelong Product Identification
Features• Thermal Transfer Printable• 10 Stock Sizes
Quality Endorsements• UL Recognized Label and Ribbon Combination*• RoHS Compliant• ISO Certified
Materials TT700 - White polyester TT730 - Glossy White polyester TT740 - Matte Silver polyester
UL/CSA Nameplate Labels
IDENTCO UL Approved
TT700 TTRR-B,D
TT730 TTRR-B,D
TT740 TTRR-B,D
* UL Recognition is contingent upon matching / printing with the appropriate IDENTCO Material & Ribbon combination recognized by UL
UL
UL
Temperature RangeDescriptionAgency
Approval
Polyester
Polyester
Polyester
Material
Matte Silver Polyester Film used for Rating Plates.
Glossy Silver Polyester Film used for Rating Plates.
Glossy White Polyester Film used for Rating Plates.
- 40 °F to 300 °F - 40 °C to 149 °C
- 40 °F to 300 °F - 40 °C to 149 °C
- 40 °F to 300 °F - 40 °C to 149 °C
Color
White
Silver
Silver UL
TTL™ 300 Part Number & Material ListWidth (W) Height (H)
IDENTCOTTL™ Series
Labelsacross
QuantityRoll
Web Width
CornerRadius (CR)
EdgeTrim
HorizontalRepeat (HR)
VerticalRepeat (VR)
31.75 25.40 2 12,000 TTL - 300 69.85 33.00 28.57 3.17 1.5838.10 19.10 2 10,000 TTL - 308 83.82 41.91 22.23 1.58 1.9038.10 25.40 1 6,000 TTL - 301 43.18 38.10 28.58 1.58 2.5450.80 25.40 1 6,000 TTL - 302 28.58 50.80 28.58 1.58 1.5850.80 31.80 1 2,500 TTL - 311 56.89 50.80 34.92 1.58 3.0469.85 25.40 1 5,000 TTL - 310 76.20 69.85 28.57 1.58 3.1869.85 34.90 1 4,000 TTL - 304 73.03 69.85 38.10 1.58 1.5876.20 25.40 1 5,000 TTL - 309 79.38 76.20 28.58 1.58 1.5876.20 38.10 1 2,500 TTL - 312 82.29 76.20 41.27 1.58 3.0476.20 50.80 1 3,000 TTL - 307 79.38 76.20 53.98 1.58 1.58
13
Edge Trim.10”
CR .0625”
1.50”38.100 mm
1.0”25.400 mm
1.125” VR28.575 mm
1.7” Web43.180 mm
Edge Trim.0625”
CR .0625”
2.750”69.850 mm
1.375”34.925 mm
1.500” VR38.100 mm
2.875” Web73.025 mm
Edge Trim.075”
CR .0625”
1.500”38.100 mm
1.650” HR41.910 mm
0.750”19.050 mm
0.875” VR22.225 mm
3.300” Web83.820 mm
Edge Trim.0625”
CR .125”
1.25”31.750 mm
1.375” HR34.925 mm
1.0”25.400 mm 1.125” VR
28.575 mm
2.750” Web69.850 mm
Edge Trim.0625”
CR .0625”
2.0”50.800 mm
1.0”25.400 mm
1.125” VR28.575 mm
2.125” Web53.975 mm
Edge Trim.0625”
CR .0625”
3.0”76.200 mm
2.0”50.800 mm
2.125” VR53.975 mm
3.125” Web79.375 mm
TTL300
TTL302
TTL307
TTL301
TTL304
TTL308
31.75mm x 25.4mm
50.8mm x 25.4mm
76.2mm x 50.8mm
38.1mm x 25.4mm
69.85mm x 34.925mm
38.1mm x 19.05mm
14
Edge Trim.125”
CR .0625”
2.750”69.850 mm
1.000”25.400 mm
1.125” VR28.575 mm
3.000” Web76.200 mm
Edge Trim.12”
CR .0625”
3.000”76.200 mm
1.500”38.100 mm
1.625” VR41.275 mm
3.240” Web82.285 mm
Edge Trim.0625”
CR .0625”
3.000”76.200 mm
1.000”25.400 mm
1.125” VR28.575 mm
3.125” Web79.375 mm
Edge Trim.12”
CR .0625”
1.250”31.750 mm
2.000”50.800 mm
1.375” VR34.925 mm
2.240” Web56.891 mm
TTL309
TTL311
TTL310
TTL312
76.2mm x 25.4mm
50.8mm x 31.75mm
69.85mm x 25.4mm
76.2mm x 38.1mm
15
Application: PackagingPart Number: PB FREE-PACKAGESize: 1.0” x 1.0”Material: TT516 - Paper
Application: PackagingPart Number: WEEE-PACKAGESize: 1.0” x 1.0”Material: TT516 - Paper
Application: PackagingPart Number: ROHS COMPLIANT-GREENSize: 1.0” x 1.5”Material: TT516 - Paper
Application: PackagingPart Number: NON ROHS REDSize: 1.0” x 1.5”Material: TT516 - Paper
Application: ProductPart Number: WEEE-PRODUCTSize: .50” x .50”Material: TT700P - Polyester
Application: PackagingPart Number: PB FREE-PRODUCTSize: .50” x .50”Material: TT700P - Polyester
Application: PackagingPart Number: PB FREE-BOARDSize: .25” x .25”Material: TT403 - Polyimide
Application: BoardPart Number: PB FREE-BOARD-POLYSize: .25” x .25”Material: TT700 - Polyester
Stock WEEE and RoHS labels
Stock Lead-free (Pb) labels
Environmental Compliance Labels
IDENTCO is your complete source for product identification labels for environmental compliance. IDENTCO offers STOCK sizes manufactured in paper, polyester and polyimide.
Highlights• RoHS• WEEE• Lead-Free (Pb)• China RoHS
Features• Paper• Polyester • Polyimide
Quality Endorsements• RoHS Compliant• ISO Certified
Materials TT516 - Paper TT700 - Polyester TT403 - Polyimide
China RoHS
Stock and Custom Labels
16
Highlights• Abrasion & Solvent Resistant• Legend Permanence• Compatible with Standard Thermal Transfer Printers
Features• High Performance Resin• Coated-Side In / Side Out
Quality Endorsements• UL/CSA Recognized Label and Ribbon Combinations*• RoHS Compliant • ISO Certified
TTRR™ RibbonsThermal Transfer Resin Ribbons
The TTRR™ Series Ribbon passes rigorous quality testing to meet the performance requirements of the TTL™ 100 Series labels. The critical bond between the ribbon and the material topcoat ensures lasting legend permanence.
IDENTCO offers a complete line of thermal transfer ribbons for various label applications.
*UL / CSA recognitions are contingent upon printing with the appropriate TTRR™ ribbon and IDENTCO material combination specified in testing by Underwriters Laboratories and/or CSA.
17