icom2010
DESCRIPTION
un paseo por la fabrica de radiocomunicacion ICOMTRANSCRIPT
![Page 1: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/1.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
103-Feb-2011
Icom Factory TourIcom Factory Tour
Wakayama, Japan Wakayama, Japan –– November 5, 2010November 5, 2010
Adam Farson VA7OJAdam Farson VA7OJ
![Page 2: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/2.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
203-Feb-2011
APDXC and IcomAPDXC and Icom
! Attendees at the Asia-Pacific DX Convention (APDXC 2010), held in Osaka, were invited to tour the Icom manufacturing plant in Wakayama, about 100 km SW of Osaka. The tour took place on Friday, November 5, 2010.
![Page 3: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/3.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
303-Feb-2011
Icom and APDXC 2010Icom and APDXC 2010
! Icom are the official sponsor of APDXC. Mr. Tokuzo Inoue, JA3FA, Founder and Chairman of Icom Inc., was the patron of APDXC 2010.
In exalted company: Shigeru Ueda JO3BAV, the author, Mr. Inoue and Johnny Siu VR7XMC
![Page 4: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/4.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
403-Feb-2011
A few factsA few facts
! Icom is a rare example of an electronics manufacturer that has not shifted production to lower cost countries, but kept its production base 100% in Japan. All Icom radios are built in Japan.
! Main product lines are: land-mobile, amateur, marine (VHF & HF radios, radar), aeronautical (VHF) and wireless LAN.
! The Wakayama Icom plant has an advanced production system to produce small volume/multi-model radio-communication products.
! 330 highly-trained production employees turn out 130,000 units/month in a highly-automated manufacturing facility.
! The factory has eight automated production lines. A line can be switched from one product to another in as little as 5 to 12 minutes.
! Icom’s R&D organization employs 270 engineers.
! We were given free access to the assembly line area and allowed to take all the photographs we wanted.
![Page 5: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/5.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
503-Feb-2011
The Icom production facilitiesThe Icom production facilities
We visited the We visited the KinokawaKinokawa factory.factory.
![Page 6: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/6.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
603-Feb-2011
Product showcaseProduct showcase
! Small product showcase in factory lobby.
![Page 7: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/7.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
703-Feb-2011
Introductory talkIntroductory talk
! The factory manager gave a short introductory presentation on Icom’s manufacturing capability and philosophy. The interpreter is to his left.
![Page 8: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/8.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
803-Feb-2011
Automated component Automated component handlinghandling
! All components, from grain-of-sand-sized SMT diodes to small integrated circuits, are delivered on Mylar tape spool cartridges.
![Page 9: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/9.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
903-Feb-2011
Typical main radio boardTypical main radio board
Once populated, the board will be separated from its surroundand mounted on a chassis by robot machines.
![Page 10: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/10.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
1003-Feb-2011
Overall view of production Overall view of production floorfloor
! The technician is loading a tape cartridge into a board-stuffing machine.
The steam-jets in the ceilingmaintain the correct humiditylevel for ESD suppression.
The automated PCB stuffingmachines pick parts off the tape, then place the parts on the circuit board which has previously been wiped with solder paste.
![Page 11: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/11.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
1103-Feb-2011
Automated component handling Automated component handling systemssystems
! Component tape reels are being loaded for Line 2.
![Page 12: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/12.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
1203-Feb-2011
A view of Lines 1 and 2A view of Lines 1 and 2
On left: Inspection machine, then a row of SMT board-stuffing machines
![Page 13: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/13.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
1303-Feb-2011
Rack of completed boardsRack of completed boards
The boards produced bythe PCB-stuffing machinesare loaded into racks that are delivered by robot carts to the correct position on the assembly lines.
![Page 14: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/14.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
1403-Feb-2011
RealReal--time status displaystime status displays
Johnny VR2XMC at the line status board. The displays show start & run times, error counts, product model,
line manager ID etc.
Line status display.
![Page 15: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/15.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
1503-Feb-2011
BoardBoard--stuffing machine in actionstuffing machine in action
![Page 16: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/16.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
1603-Feb-2011
Control computer for board lineControl computer for board line
Panic button!
![Page 17: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/17.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
1703-Feb-2011
XX--ray board inspection machine ray board inspection machine ––scans for soldering/assembly defects in multiscans for soldering/assembly defects in multi--layer PCBlayer PCB’’s. s.
The machine is totallyenclosed in a leadencabinet.
![Page 18: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/18.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
1803-Feb-2011
Mounted PCB inspection Mounted PCB inspection machinemachine
Inside detail showing board in test
![Page 19: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/19.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
1903-Feb-2011
Detail of antiDetail of anti--ESD steam jetsESD steam jets
![Page 20: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/20.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
2003-Feb-2011
Automated HT assemblyAutomated HT assembly
HT PCBprior toinsertion in auto-assembly machine.
Surroundswill be cutoff.
HT PCB fed into themachine forradioassembly.
![Page 21: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/21.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
2103-Feb-2011
““Come ride with us, Robbie.Come ride with us, Robbie.””
![Page 22: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/22.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
2203-Feb-2011
AntiAnti--ESD vacuum cleaner ESD vacuum cleaner and completed PCBs awaiting their chassisand completed PCBs awaiting their chassis
![Page 23: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/23.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
2303-Feb-2011
Final assembly areaFinal assembly area
![Page 24: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/24.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
2403-Feb-2011
Final test/inspection areaFinal test/inspection area
![Page 25: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/25.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
2503-Feb-2011
ICIC--718 front panels718 front panelsawaiting mounting on radiosawaiting mounting on radios
![Page 26: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/26.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
2603-Feb-2011
Chassis assembly robots:Chassis assembly robots:loading and operatingloading and operating
![Page 27: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/27.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
2703-Feb-2011
A busy corner of the final A busy corner of the final assembly/test areaassembly/test area
![Page 28: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/28.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
2803-Feb-2011
Final alignment of HT Final alignment of HT chassischassis
![Page 29: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/29.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
2903-Feb-2011
Final alignment benchFinal alignment bench
![Page 30: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/30.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
3003-Feb-2011
ICIC--9100 chassis9100 chassispartially assembledpartially assembled
![Page 31: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/31.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
3103-Feb-2011
ICIC--9100 chassis, rear view9100 chassis, rear view
![Page 32: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/32.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
3203-Feb-2011
ICIC--9100 chassis, front view9100 chassis, front view
![Page 33: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/33.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
3303-Feb-2011
ICIC--9100 chassis: 9100 chassis: subsub--assemblies addedassemblies added
![Page 34: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/34.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
3403-Feb-2011
ICIC--9100 front9100 front--panel mouldingspanel mouldings
![Page 35: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/35.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
3503-Feb-2011
Chassis fan installationChassis fan installation
![Page 36: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/36.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
3603-Feb-2011
An RF test positionAn RF test position
![Page 37: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/37.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
3703-Feb-2011
Packaging area: Packaging area: individual radios are individual radios are packed in their cartonspacked in their cartons
![Page 38: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/38.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
3803-Feb-2011
““Ship it, guys!Ship it, guys!””
![Page 39: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/39.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
3903-Feb-2011
The package conveyorThe package conveyor
Battery case
Xcvr
![Page 40: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/40.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
4003-Feb-2011
CartonCarton--sealing robot: sealing robot: sealed cartons sealed cartons are loaded onto a mobile robot, which takes themare loaded onto a mobile robot, which takes themto the stockroomto the stockroom
Swiss NEMA (1948)
![Page 41: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/41.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
4103-Feb-2011
The stockroom The stockroom (warehouse area)(warehouse area)
![Page 42: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/42.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
4203-Feb-2011
Related activitiesRelated activities
! At the end of the tour, we were taken to Icom’s corporate HQ in downtown Osaka for a meeting with engineers and managers in the Amateur Products Division.
! We were shown an exhibition of Icom products in the lobby, and then taken to a conference room where we viewed a presentation on Icom’s new RS-BA1 remote-control software suite. We also had an opportunity to participate in a Q&A session with Icom engineering staff.
! Our day concluded with a superb welcoming party and buffet at International House, Osaka-Uehonmachi, hosted by Mr. Inoue.
! The following Sunday, Johnny Siu VR2XMC and I attended an IC-9100 Dealer Preview at Icom’s Nipponbashi office in central Osaka.
![Page 43: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/43.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
4303-Feb-2011
Icom HQ, OsakaIcom HQ, Osaka
![Page 44: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/44.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
4403-Feb-2011
Lobby exhibit of Icom Lobby exhibit of Icom productsproducts
![Page 45: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/45.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
4503-Feb-2011
Part of Icom Part of Icom ““minimini--museummuseum””also in HQ lobbyalso in HQ lobby
![Page 46: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/46.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
4603-Feb-2011
In the conference roomIn the conference room
![Page 47: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/47.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
4703-Feb-2011
RSRS--BA1BA1 slide slide showing remote control showing remote control via Internetvia Internet
![Page 48: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/48.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
4803-Feb-2011
Johnny Johnny SiuSiu VR2XMC VR2XMC operating operating the ICthe IC--9100 at the Osaka Dealer Preview9100 at the Osaka Dealer Preview
![Page 49: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/49.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
4903-Feb-2011
““ItIt’’s s mymy turn!turn!””
![Page 50: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/50.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
5003-Feb-2011
RSRS--1BA Remote Control Suite 1BA Remote Control Suite demo at the Osaka Dealer Previewdemo at the Osaka Dealer Preview
![Page 51: Icom2010](https://reader038.vdocuments.mx/reader038/viewer/2022102804/547e0087b4af9f733f8b46c8/html5/thumbnails/51.jpg)
- • - • - - • - - • • • • • • - • - - • • • - • • • • • - •
NSARC - ICOM Factory Tour, November 2010
5103-Feb-2011
Thanks for watching!Thanks for watching!Future presentation: Future presentation: ““JapanJapan””