International Building

MaterialsIs pleased to present to you

Ginde Pipes

Ginde Pipes

Ginde Pipes is a unique and innovative system

Comes in all common sizes

Ginde Pipes

Ginde Pipes is the largest pipe manufacturer in the world

Ginde Pipes are now placed in 89 countries around the world

Ginde is meets and exceeds all certifications

Certification Products meet the following countries quality standards: 

United States of America NSF INTERNATIONAL, ASTM F1281, ASTM F1282

Germany: DVGW W542, DVGW W534

United Kingdom: BS 7291, BS 6920

Australia: AS 4176

Russia: OCT 12.2.003, 18599 5.1, P52134

Canada: CSA B137.9, CSA B137.10Israel:SI 2242

South Africa: SABS JASWIC R56  

This includes the most stringent

Advantages of Ginde Pipes

• Individual advantages show its consistency is very strong and it has the ability to bend.

• Superior resistant properties of high temperature, high pressure, corrosion and fire.

• Smooth inner surface of the pipe reduces flow resistance to fluids and has the ability to convey water 30% more efficiently than metal pipes.

• Thermal conductivity is 0.45W/m.k and is more cost effective than metal pipes therefore saves insulation materials costs and convenient installation.

• Small diameter pipes are easy to bend and are packaged in rolls therefore saves time, cut-off waste and labor cost.

Advantages of Ginde Pipes

• Under normal conditions the lifespan is generally more than 50 years.

• Transportation fees and installation costs are reduced because of the PAP pipe’s light weight (one tenth of the zinc-plates pipes weight).

• The plastic covered aluminum core assures no oxygen permeability therefore avoids any chance of bacteria.

• Underground pipes are easily found with metal detectors.

Advantages of Ginde Pipes

• It has excellent static-shield properties and is often used to cover electric cabling.

• The aluminum middle layer has a very low linear heat expansion coefficient.

• The pipe is not only as rigid as metal pipes but is also flexible and pressure-resistant.

• Corrosion resistance properties prevents encrustation build-up in the pipes thus enabling the free flow of water and eliminating rust that causes stains in tubs and basins.

• This pipe has high temperature and high-pressure resistance and can work under continuous normal working pressure with water temperatures up to 95 °C/ 203 °F.

Advantages of Ginde Pipes

• Heat preservation and energy saving properties greatly minimizes heat losses during hot water flow.

The heat conduction coefficient is 1/200 of metal pipes.

• The pipes are lightweight and the specific gravity is 1/7 of metal pipes.

• Burning resistance – The HDPE-AL-PE (X) composite structure of Ginde pipe has a much better burning resistance than other Polyethylene pipes. With the test by the national Fire-Proof Construction Material Quality Supervisory Test Center, the burning resistance reaches Grade B1 of GB8624, the same stipulations that are used for wire and cable conduit plastic materials.

Advantages of Ginde Pipes

• Hygiene – Ginde’s multilayered composite pipe is hygienic, non-toxic, rust free and prevents growth of micro-organisms and therefore avoids contamination of water and reduces health risk.

Applications for Ginde Pipes

• Industrial and residential systems for hot and cold water

• Pipeline systems for conveying potable water

• Heating pipelines for under floor heating, wall and roof heating, snow melting in parking lots and airport runways

• Pipelines for air conditioners

• Pipelines for solar heating systems

• Pipelines for gas and coal gas

• Pipelines for oxygen transportation in hospitals

Applications for Ginde pipes

• Pipelines for oil and cooling fluid transportation • Pipelines for electric wire and cabling • Pipelines for compressed air • Pipelines for fluid transportation in beverage factories • Pipelines for irrigation engineering in agriculture and gardens

Ginde Fittings

Ginde manufactures a wide range of fittings. Press fittings, compression fittings and clamp fitting are utilized for a vast range of applications.Press or Crimp Fittings are the most popular products for water reticulation in residential, commercial and industrial applications.For Industrial and commercial applications where large volumes of fluid are conveyed, the Clamp Fittings are used on the larger size composite pipe.

All types of Fittings

Ginde Pipes are bendable

Small diameter pipes are shipped and stored in rolls, reducing space, transportation costs, reduce waste (they can be cut to size on site), and easy to use.

Fittings are made strong

Fittings are made of brass

Our factory is ISO:9000 compliant

Guaranteed

Technical Specifications

Thermal conductivity 0.45W/(MK)

Coefficient of thermal expansion 0.00098425INC

Bend radius ≥ 5 x D (D = outside diameter)

Working Temperature -40°C – 95°C / -40°F – 203°F

Oxygen-permeability 0

Coefficient of roughness 1.5748e-5 inch

Corrosion resistance Excellent

Technical Specifications

Burning resistance Grade B1 of GB8624

Hygiene Excellent

Burst pressure 1247psi

Life span 50yr

Detectable Walls & underground with metal detector

Static shield Excellent

Only tools necessary for small diameter pipes

Ginde pipe installation Bowling Green University

Questions?