ibex 2008 boat fuel systems: design and compliance session 309 john mcknight, director environmental...
DESCRIPTION
Marine Engine and Boat Projects Boat Manufacturer Projects Diurnal Emission Test, ATL, Mesa, AZ, HH&A Fuel, Vent and Fill Hose Emission Test, Sterling Labs, HH&A Canister In-Boat Test Project, Mead Westvaco, HH&A Canister Shock and Vibration Durability Tests, Delphi Engineering ABYC H-24 fuel hose emission standards, ABYC Committee Marine Engine Projects CARB Fresh Water Catalyst Test Program, SwRI EPA/CARB Salt Water Catalyst Test Program, SwRI Off Cycle Emission Test Program, SwRI On-board Diagnostic Standard Development SAE JTRANSCRIPT
IBEX 2008Boat Fuel Systems: Design and Compliance
Session 309
John McKnight, Director
Environmental &Safety Compliance
Session Speakers
• Mike Samulski, USEPA, Office of Transportation and Air Quality, [email protected]
• Nydia Reyes-Morales USEPA Compliance Division [email protected]
• John Adey, ABYC, Technical Director
• Brian Scott, Category Manager- Fuel Systems Hardware, Attwood Corporation
www.nmma.org government relations- environmental-IBEX 2008
Marine Engine and Boat ProjectsBoat Manufacturer Projects
• Diurnal Emission Test, ATL, Mesa, AZ, HH&A
• Fuel, Vent and Fill Hose Emission Test, Sterling Labs, HH&A
• Canister In-Boat Test Project, Mead Westvaco, HH&A
• Canister Shock and Vibration Durability Tests, Delphi Engineering
• ABYC H-24 fuel hose emission standards, ABYC Committee
Marine Engine Projects
• CARB Fresh Water Catalyst Test Program, SwRI
• EPA/CARB Salt Water Catalyst Test Program, SwRI
• Off Cycle Emission Test Program, SwRI
• On-board Diagnostic Standard Development SAE J1939-05