Hoshizaki

© HOSHIZAKI AMERICA, INC.618 Hwy. 74 S., Peachtree City, GA 30269 TEL 1-800-438-6087 FAX 1-800-345-1325 www.hoshizaki.com

CUBER DIMENSIONSW x D x H

KML-631M_H1/13

Item # 13192

LOW-PROFILE MODULAR CRESCENT CUBER

Warranty Valid in United States, Canada, Puerto Rico, & U.S. Territories. Contact factory for warranty in other countries.

Three Year - Parts & Labor on entire machine.

Five Year - Parts & Labor on: Evaporator

Five Year - Parts on: Compressor, air-cooled condenser coil.

KML-631M_HItem #

Project:

Qty:

Hoshizaki reserves the right to change specifications without notice.

KML-631M_H30 x 273/8 x 26

*AutoCad available on KCL

• Up to 636 lbs. of ice production per 24 hours

• Durable stainless steel exterior

• Individual crescent cube

• Protected by H-GUARD Plus Antimicrobial Agent

• CycleSaver® Design

• EverCheck® alert system

• Stainless steel evaporator

• Removable air filters (Air-cooled models only)

• R-404A Refrigerant

KML-631MAHAir-Cooled

Shown on an optionalB-500

KML-631MWHWater-Cooled

KML-631MRHRemote Air-Cooled

®

ICEDISPENSER

HOSHIZAKI

DB-200

B-500

B-250

KM CUBE DIMENSIONS

Hoshizaki KML-631MAH Item#:110

Bush Site Content Bush Refrigeration Page: 526

Hoshizaki DIMENSIONS

W x D x H

© HOSHIZAKI AMERICA, INC.

KML-631M_HLOW-PROFILE MODULAR CRESCENT CUBER

UTILITY CONSUMPTION

AIR-COOLED

Model Number

70˚

50˚ 70˚

575

90˚

80˚

90˚

Ice ProductionPer Cycle

KWH per100 LBS.

Potable

WaterGal. per100 lbs.Lbs. Cubes

KML-631MWH

Air Tem

p˚ F.

Water Temp˚ F.

SPECIFICATIONS

Model Number Condenser AmperageMin. CircuitAmpacity

ShippingWeight

6.8 20 A 217 lbs.Water-CooledKML-631MWH

6.2 26.0

558

552

552

522

515

481

457

9.0 480

497

90/70

Condenser

WaterGal. per100 lbs.

N/A

O P E R AT I N G L I M I T S

• Ambient Temp Range 45 - 100˚F• Water Temp Range 45 - 90˚F• Water Pressure 10 - 113psig• Voltage Range 187 - 253V

C O N D E N S I N G U N I T

• Voltage Range 104 - 127V• Ambient Temp Range -22 - 122˚F

ELECTRICAL & PLUMBING/KML-631M_H

• 208-230/60/1(3 wire with dedicated neutral for 115V)• 20 Amp Max Fuse/HACR Breaker Size• 3/8” ODcopper or equivalent independent potable water supply• 3/4” FPT independent drain connection

SERVICE

• Panels easily removed and all componentsaccessible for service.

• Removable/cleanable air filters (Air-cooled models only)

618 Hwy. 74 S., Peachtree City, GA 30269 TEL 1-800-438-6087 FAX 1-800-345-1325 www.hoshizaki.com Printed in U.S.A.

KML-631M_H30 x 273/8 x 26

WATER-COOLED

70˚

50˚ 70˚

632

90˚

80˚

90˚Air Tem

p˚ F.

Water Temp˚ F.

632

631

631

631

593

572

579630

KML-631MAH

4.4 24.89.7 480 119

7.6 20 A 220 lbs.Air-CooledKML-631MAH

STORAGE BINS

Model Number Application Capacity ARI-Rated Capacity

B-500 500 lbs. 360 lbs.

B-700 700 lbs. 550 lbs.

B-800 800 lbs. 600 lbs.

B-900 900 lbs. 660 lbs.

B-1150 1150 lbs. N/A

B-1300 1275 lbs. N/A

B-1500 1500 lbs. N/A

B-1650 1605 lbs. N/A

• Air-cooled

• Water-cooled

• Remote Air-cooled

B-250 250 lbs. 230 lbs.

REMOTE AIR-COOLED

70˚

50˚ 70˚

636

90˚

80˚

90˚Air Tem

p˚ F.

Water Temp˚ F.

626

622

622

604

578

545

535589

KML-631MRH 5.3 24.09.4 480 N/A

7.8 20 A 220 lbs.Remote

Air-CooledKML-631MRH

FRONT VIEW SIDE VIEW

AIR-COOLED UNITWATER-COOLED UNIT

REMOTE AIR-COOLED UNIT

ICE DROP ZONE

32 3/1615 11/16

36 15/16URC-9F

Air Flow

2 11/16

2 1/2

18 1/8

2115/16

34 5/16

Liquid RefrigerantLine

Discharge Line

ElectricalConduitAccess

Pre-Charged Tubing Kits(Sold Separately)20’ R404-2068-235’ R404-3568-255’ R404-5568-2

Voltage supply for the URC Remote Condenser is supplied from the Ice Maker.No additional circuit is required.

URC-9F Remote Condenser (Sold Separately)For Use with KML-631MRH

3

Hoshizaki KML-631MAH Item#:110

Bush Site Content Bush Refrigeration Page: 527

The HDI-11 is a single housing water treatment system with a 10” drop-in cartridge that reduces sediment down to 0.5 micron and reduces chlorine, taste & odor at a flow rate of 1.5 gpm for 15,000 gallons. The system includes IsoNet®, patented scale inhibiting technology, which delivers consistent protection against the formation and accumulation of scale and provides a protective barrier to help guard against corrosion.

IsoNet® - Patented scale inhibiting technology helps protect equipment against scale and corrosion for the rated capacity of the system.

Reduces maintenance frequency and cost, and extends equipment life.

Gradient-density depth filtration reduces dirt, rust, and other debris as small as 1/2 micron to assure clean, clear water and protect solenoids, valves and other fittings against wear and plugging.

High capacity activated carbon filtration makes water taste great and protects equipment against corrosive chlorine.

Improves equipment operating efficiency.

Stainless steel mounting bracket and full-flow inlet shut-off valve makes installation simple.

Built-in pressure gauge allows visual monitoring of operating pressure.

Inlet shut-off and depressurization valves make changing the filter quick and simple.

Generates less waste, only the drop-in cartridge is replaced. No discarding of metal or plastic quick-change filters.

Replacement cartridge cost per gallon is much less than proprietary quick-change filters.

NSF Certified under Standard 42.

Feed-water connection to system should be COLD only.

Do not exceed system specifications for temperature and pressure.

Allow 3” clearance below system for filter housing removal and cartridge replacement.

Detailed installation, operation & maintenance manual is included with each system.

No activation procedure or flushing is required for system to perform as specified.

ITEM #: __________________ QTY: ________

JOB NAME/NUMBER_____________________

Model: HDI-11 Part #: 160-60105

Application

Snapshot

System Benefits

Installation Tips

- Cubers up to 800 lbs.

- Flakers up to 1,000 lbs.

HOSHIZAKIWATERFILTRATION

Hoshizaki HDI-11 Item#:110

Bush Site Content Bush Refrigeration Page: 528

Model Part Number Qty

CTO-10H 252-40210 1

Systems have a 3 year warranty against defects in material and workmanship.

Model HDI-11 is tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of:Standard 42: Aesthetic Effects, Chlorine ReductionTaste and Odor ReductionNominal Particulate Reduction, Class 1

System Dimensions(Height x Width X Depth, inches

14 1/2” x 6 9/16” x 5 1/8”

Connection - Inlet & Outlet 1/2” NPT female

Operating Pressure Range 10-125 psi (0.7 -8.6 bar)

Inlet Water Temperature Range 35o -100o F (2o -38o C)

Shipping Weight 6 lbs.

PerformanceChlorine, Taste and Odor Reduction Capacity

15,000 gals (56,700 liters)

Service Flow Rate 1.5 gpm (5.7 lpm)

Sediment Reduction .5 micron(nominal)

Scale & Corrosion Inhibitor IsoNet (70 grams)

Model: HDI-11 Part #: 160-60105

Specifications

Do not use on water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

It is recommended that filters be changed every six months, when capacity is reached or when effluent pressure or flow becomes inadequate.

This product is for commercial use only and must be installed and maintained according to manufacturers guidelines.

Replacement Cartridge(s)

Warranty

HDI11spec612

Dealer/Distributor Info:

Optonal Flush Valve Kit - Part #: 160-52910

Mfg. by OptiPure for Hoshizaki America, Inc.

HOSHIZAKIWATERFILTRATION

Application Guide

Model HDI-11

AM50

KM-61

KM-101

KM-151

KM-201

KM-260

KM-320

KM-515

KM-600

KM-650

KML-250

KML-351

KML-451

KML-631

KMD-410

KMD-450

KMS-830

KML700-M

All Cubelet models except F-2000-c

All Flaker models except F-2000

Hoshizaki HDI-11 Item#:110

Bush Site Content Bush Refrigeration Page: 529