The i5000 MetroMark utility locator combines Vivax-Metrotechs advanced line locating technology and electronic marker system (EMS) detection in a single instrument. Capable of detecting and measuring the depth of all commercially available markers, the i5000 MetroMark has the added ability of reading serial numbers of programmable Marker iDs. Access the i5000s line locating or marker detection mode with one press of the receivers softkey. The intuitive operational display provides simple maneuvering of all the available features frequency selection, marker selection, automatic or manual signal gain, and access to the main menu for other advanced features.

Technical Data Features: Receiver Cable, Sonde & Marker Locator Electronic Marker System (EMS) Detection Marker iD Read Capability Signal Select Distortion Alert Left/Right Guidance Arrows Guidance Compass Data Logging Available With Mylocator Bluetooth Transmitter 10 Watt Signal Select Transmit Up To Three Frequencies Simultaneously Bluetooth Power Protection Line Voltage Meter

Standard Equipment: Complete kit consists of MetroMark Receiver 10W Transmitter Ground Spike Insulated Conductive Attachments Operations Manual Carrying Case Options: Sheath Fault Locating (SFL) Transmitter Standalone A-Frame For Fault Locating GPS Antenna MyLocator Online Data Warehousing Analysis Service

Accessories: Inductive Clamps Soft Cases Search Coil

i5000 MetroMark

Receiver Electronic Marker System (EMS) Detection Mode Detection Range (passive) 5ft (1.5m), depending upon soil conditions and marker type Marker Read Capability Depth

10 digit ID number (XXX-XXX-XXXX), 3M EMS Marker iD only Marker iD Read Range Up to 3ft (0.9m) Operating Frequencies Utility Market Color Icon Frequency (kHz)

Power Red 169.8

Water Blue 145.7

Sanitary Green 121.6

Telephone Orange 101.4

Gas Yellow 83.0

CATV Orange/Black 77.0

Reclaimed Water / General Purpose

Purple

66.35

Line Locating Mode

Frequencies

Active Frequencies -491Hz, 982Hz, 8.44 kHz, 9.82 kHz, 35 kHz, 82 kHz, 83 kHz Passive Frequencies -50Hz, 60Hz, 100Hz, 120Hz, RF 14 21 kHz Extended and special frequency sets available

Depth Display Accuracy

0 - 10ft (0 - 3m): +/- (5% + 2in) under ideal field conditions 10 - 20ft (3 - 6m): +/- 10% under ideal field conditions

Depth Range 20ft (6m) Maximum Gain Adjustment Automatic & manual with push-button centering Controls On/off, four-way navigation key and soft keys Display Indicators

Frequency GPS Audio Volume Battery Condition Guidance Compass Distortion Alert Signal Select Signal Strength Left / Right Guidance Menu Softkey Frequency Softkey Gain Softkey Shortcut Softkey Peak Signal Bar Graph Null Centerline

Line ID Signal Select Guidance Compass Distortion Alert

System Operating Temperature -4F to 122F (-20C to 50C) Batteries Li-ion rechargeable Battery Life 20 hours continuous, depending upon use Battery Check Continuous display Dimensions 29in(L) x 8.25in(W) x 13.25in(H) (737mm x 210mm x 337mm) Weight 5.53lbs (2.5kg) Regulatory Compliance FCC, CE Environmental IP54 Display VGA Bright Color Communications Bluetooth or RS232 serial cable Data Acquisition GPS, internal data logging memory

Transmitter

Output Frequencies 491Hz, 982Hz, 8.44 kHz, 9.82 kHz, 35 kHz, 82 kHz, 83 kHz (direct) 9.82 kHz, 82 kHz (inductive) Extended and special frequency sets available

Output Power Variable to 10W Simultaneous Output Up to three active frequencies Controls Frequency select

Measurement units (mA, Volts, Ohms, Watts) Output power Signal SelectTM Menu 4-way navigation select SFL On/off

Display Indicators Battery status Audio volume Output mode Frequency setting Frequency output % output in SFL or induction mode Output graph Loop resistance graph

Display VGA monochrome Batteries Li-ion rechargeable Battery Life Up to 12 hours continuous, depending upon use Operating Temperature -4F to 122F (-20C to 50C) Dimensions 9in(L) x 11in (W) x 6.75in (H) (229mm x 279mm x 171mm) Weight 8.24lbs (3.7kg) Regulatory Compliance FCC, CE Environmental IP54