wireless speaker with NFC one-touch pairing

ISBT10013

instruction manual

Contents

safety warnings ................................................................................................................................. 3

unpacking .......................................................................................................................................... 5

product overview ............................................................................................................................. 6main unit ....................................................................................................................................................................... 6

- front view ........................................................................................................................................................................... 6

- top view .............................................................................................................................................................................. 6

- rear view ............................................................................................................................................................................. 6

remote control ............................................................................................................................................................ 7

remove the insulating strip from the remote control ............................................................... 8

battery replacement for the remote control ............................................................................... 8

remote control operation range .................................................................................................... 9

power source ..................................................................................................................................... 9mains power ................................................................................................................................................................ 9

general operation ........................................................................................................................... 10switching on / off the unit.....................................................................................................................................10

selecting modes .......................................................................................................................................................10

adjusting the volume ..............................................................................................................................................10

adjusting the sound effect ....................................................................................................................................10

Bluetooth® operation .................................................................................................................... 11

NFC operation ................................................................................................................................. 12Connecting an NFC device with one already connected ..........................................................................12

iPod / iPhone / iPad operation ..................................................................................................... 13charging your iPod / iPhone / iPad ....................................................................................................................13

AUX IN operation ............................................................................................................................ 14

maintenance .................................................................................................................................... 14cleaning the unit ......................................................................................................................................................14

hints and tips ................................................................................................................................... 15

specifications ................................................................................................................................... 15

3

• Read all the instructions carefully before using the unit and keep them for future reference.

• Retain the manual. If you pass the unit onto a third party make sure to include this manual.

• Check that the voltage marked on the rating label matches your mains voltage.

Damage• Please inspect the unit for damage after

unpacking.• Do not continue to operate the unit if you

are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.

Location of Unit• The unit must be placed on a flat stable

surface and should not be subjected to vibrations.

• Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.

• The mains socket must be located near the unit and should be easily accessible.

• This unit is designed for indoor use only.

Temperature• Avoid extreme degrees of temperature,

either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric fires.

• Avoid exposure to direct sunlight and other sources of heat.

Naked Flames• Never place any type of candle or naked

flame on the top of or near the unit.

Moisture• To reduce the risk of fire, electric shock or

product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit. Do not operate the unit with wet hands, near water or other liquid.

• If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer.

Ventilation• To prevent the risk of electric shock or fire

hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.

• Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.

Safety• Always disconnect the unit from the mains

supply before connecting/disconnecting other devices or moving the unit.

• Unplug the unit from the mains socket during a lightning storm.

• In the interests of safety and to avoid unnecessary energy consumption, never leave the unit switched on while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Switch it off and disconnect the mains adapter from the mains socket.

Mains Cable• Make sure the unit is not resting on top of

the mains cable, as the weight of the unit may damage the mains cable and create a safety hazard.

Interference• Do not place the unit on or near appliances

which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound.

Batteries• Batteries used in the unit are easily

swallowed by young children and this is dangerous.

• Keep loose batteries away from young children and make sure that the battery holder tray is secure in the unit. Seek medical advice if you believe a cell has been swallowed.

• Please dispose of batteries correctly by following the guidance in this manual.

Supervision• Children should be supervised to ensure

that they do not play with the unit and the remote control.

• Never let anyone especially children push anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock.

safety warnings

4

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.

Service• To reduce the risk of electric shock, do not

remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.

• Do not open any fixed covers as this may expose dangerous voltages.

Maintenance• Ensure to unplug the unit from the mains

socket before cleaning.• Do not use any type of abrasive pad or

abrasive cleaning solutions as these may damage the unit’s surface.

• Do not use liquids to clean the unit.

5

Thank you for purchasing your new iWantit wireless speaker with NFC one-touch pairing.

We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

unpackingRemove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

The Main Unit Remote Control

If items are missing or damaged, please contact Partmaster (UK only). Tel: 0344 800 3456 for assistance.

6

product overview

main unitfront view

top view

1. IR Sensor

2. Subwoofer speaker

3. Speakers

1. BLUETOOTH MODE Indicator

2. IPHONE/IPOD/IPAD Mode Indicator

3. AUX IN Mode Indicator (bright) STANDBY Mode Indicator (Dim)

4. STANDBY/SOURCE Button• Press and hold to switch the unit

to standby mode.• Press to switch the unit on if in

standby mode.• Press to toggle between Bluetooth,

iPhone/iPod/iPad and AUX IN Modes.

5. PLAY/PAUSE ButtonPress to start or pause the playback in iPhone/iPod/iPad and Bluetooth modes.

6. VOLUME +/– ButtonsTo adjust the volume

2

3

1

6541 2 3

rear view

1. USB PortFor connection of iPhone/iPod/iPad for playback and charging of mobile device.

2. AUX IN Socket

3. MAINS CABLE4. POWER ON/OFF Button

41 32

If the unit is idle for approximately 20 mins, it will automatically switch to standby mode.

7

remote control

1. STANDBY ButtonSwitches the unit between on and standby modes.

2. PLAY/PAUSE ButtonStarts or pauses playback.

3. LEFT/RIGHT (SKIP ) Button Returns to start of current track.

Moves to end of current track.

Moves backwards through current track

Moves forwards through current track

UP/DOWN ButtonTo select the options on the iPhone/iPod/iPad menu screen.

ENTER ButtonConfirms selection on the iPhone/iPod/iPad menu screen.

4. MENU ButtonNavigates through iPod/iPhone/ iPad menus.

5. SOURCE ButtonSwitches between Bluetooth, iPhone/iPod/iPad and AUX IN modes. The LED indicators indicate the mode chosen.

6. TREBLE – / + ButtonTo adjust the treble level.

7. BASS – / + ButtonTo adjust the bass level.

8. MUTE ButtonTo mute and restore sound.

9. VOLUME – / + ButtonTo adjust the volume.

1

3

4

8

2

5

6

7

9

8

remove the insulating strip from the remote controlRemove the insulating plastic strip from the battery if the battery is being used for the first time. It is located at the bottom back side of the remote control.

2. Pull out the battery holder and remove the old battery.

battery replacement for the remote controlThe remote control requires a CR2025, 3V Lithium battery.

1. Slide and hold the battery release tab in the direction of the arrow.

3. Replace with a new battery.

4. Insert the battery holder back into the remote control.

handling the battery• Improper or incorrect use of batteries may cause corrosion or battery

leakage, which could cause fire, personal injury or damage to property.• Install the battery correctly by following the polarity (+ and –) indications

in the battery compartment.• When the battery is exhausted, the remote control will not function. • Only use the battery type indicated in this manual.• Do not dispose of the used battery as domestic waste. Dispose of it in

accordance with the local regulations.• Small button cell batteries such as the one used in the remote control

are easily swallowed by young children and this is dangerous. Keep loose button cells away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed.

9

remote control operation rangePoint the remote control at the unit no more than 5 metres from the remote control sensor and within 60° of the front of the unit. The operating distance may vary depending on the brightness of the room.

30° 30°

Within about 5m

power source

mains powerThis unit was designed to operate with an AC 100-240V power supply. Connecting the unit to any other power source may cause damage to the unit.

1. Unwind the mains cable to its full length.

2. Connect the mains plug to a mains socket. Make sure the mains plug is fully inserted into the mains socket. Switch on at the mains socket.

3. The unit is now connected and ready to use.

4. To switch the unit off completely, switch the MAINS POWER switch to the OFF position or withdraw the mains plug from the mains socket.

handling the remote control• Take care of your fingernails when you press and hold the battery release tab.• Do not drop or cause impact to the remote control.• Do not spill water or any liquid on the remote control.• Do not place the remote control on a wet object.• Do not place the remote control under direct sunlight or near sources

of excessive heat.• Remove the battery from the remote control when not in use for a long

period of time, as it could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire.

10

general operation

switching on / off the unit• Ensure that the plug is switched on at the wall socket, then switch the POWER ON/OFF

switch at the rear of the unit to the ON position.

• To turn the unit on, either press the STANDBY button on the remote control or press the STANDBY/SOURCE button on the unit. The standby mode indicator will light.

• To switch the unit to standby, either press the STANDBY button on the remote control or press and hold the STANDBY/SOURCE button on the unit.

• To completely turn off the unit, switch the MAINS POWER switch at the rear of the unit to the OFF position.

selecting modes• On the unit, press the STANDBY/SOURCE button repeatedly to toggle between

Bluetooth, iPhone/iPod/iPad and AUX IN modes. The LED indicator next to the selection will light up indicating the mode chosen.

• On the remote control, press the SOURCE button repeatedly to select either Bluetooth, iPhone/iPod/iPad or AUX IN mode. The LED indicator next to the mode chosen will light up.

• NFC mode is selected with the unit in standby or Bluetooth modes by placing an NFC device close to (within 10mm) the unit’s NFC sensor.

adjusting the volume• Press the VOLUME +/– buttons on the unit or remote control to adjust the volume.

• If you wish to switch the sound off, press the MUTE button on the remote control. The LED indicator next to the mode in use will flash. Press the MUTE button again or the VOLUME +/– button to resume normal listening.

adjusting the sound effect• Press the BASS +/– button repeatedly on the remote control to adjust the bass level.

• Press the TREBLE +/– button repeatedly on the remote control to adjust the treble level.

If the unit is idle for approximately 20 mins, it will automatically switch to standby mode.

11

Bluetooth® operation1. Select BLUETOOTH mode by repeatedly pressing the STANDBY/SOURCE button

on the unit or SOURCE button on the remote control.2. Activate Bluetooth on the device to be connected and select search mode.

3. “ISBT10013” will appear on the list of Bluetooth devices. Type in the password “0000” if requested.

4. There will be a sound once the connection is complete.

5. In BLUETOOTH mode the PLAY/PAUSE, VOLUME +/– controls, MUTE button and buttons can be controlled using the remote control. Use the controls on the device for all other functions.

6. You must disconnect the Bluetooth device before it can be paired with another device. There will be a sound to confirm the disconnection.

If you are trying to pair your speaker to a mobile device and your mobile device shows the message ‘ failed to connect and password is incorrect’, then switch the unit off at the mains switch, wait 1 minute then switch the unit back on. Try pairing again using bluetooth or NFC modes.

12

Distance between device sensor and sensor area on unit should be less than 10mm

Connecting an NFC device with one already connectedYou can only connect one NFC device at a time. If an NFC device is already connected, the connected device must be disconnected before you can connect another NFC device. This is to prevent some from changing the music you are playing without your permission.

1. In the Bluetooth settings of the connected device select disconnect. The Bluetooth device will now disconnect.

2. While the speaker is in Bluetooth mode touch the other NFC device against the NFC sensor, the device will now connect.

NFC operationNFC is a one touch way of pairing your NFC device via Bluetooth to your speaker.

1. The unit must be in STANDBY or Bluetooth mode to pair using NFC. Check your device has NFC enabled.

2. Place the NFC sensor area on the device close to the unit’s NFC sensor area (it will work best within 10mm). The unit will switch on and switch to Bluetooth mode, it will play a sound to show it is connected via Bluetooth and the Bluetooth LED on the unit will light up.

The first time you use a device with NFC or if you have previously used it but un-paired it you will be asked if you want to connect to the speaker. Confirm you want to connect.

3. Use the controls on the device to select and play music. In Bluetooth mode the PLAY/PAUSE, VOLUME +/– controls, MUTE button and buttons on the device and remote control can be used to control playback. Use the controls on the device for all other functions.

4. To disconnect the device place it close to the NFC sensor area again. The device will disconnect and your unit will remain in Bluetooth mode.

If its the first time the NFC device has been used you will your HiFi you will be asked if you want to connect. Confirm you want to connect.

13

iPod / iPhone / iPad operationThis unit can support the following iPhone/iPod/iPad models.

Type Support Model

iPhone • iPhone 6s Plus, 6s, 6 Plus and 6• iPhone 5s, 5c and 5

iPod • iPod touch 5th, 6th and 7th generation

iPad • iPad Pro• iPad Air and Air 2• iPad mini, iPad mini 2, iPad mini 3 and iPad mini 4• iPad 4th generation

1. Select IPHONE/IPOD/IPAD mode by repeatedly pressing the STANDBY/SOURCE button on the unit or SOURCE button on the remote control.

2. Connect your iPhone/iPod/iPad to the unit using the USB socket on the back of unit.

3. Once connected, the unit will start playback automatically and also start charging the device.4. Select your desired music and play the connected iPhone/iPod/iPad as usual.

You can use either the iPhone/iPod/iPad controls or the remote control.

• Press the PLAY/PAUSE button on the unit or remote control to start/pause playback.

• Press the buttons on the remote control to select the previous or next song. To fast rewind or fast forward through a song press and hold either the or button.

• To view menus on the iPhone/iPod/iPad, press the MENU button on the remote control, then use the UP/DOWN buttons to navigate through the different menu options. Press the ENTER button to confirm a choice.

To control the menu operation of iPad series, iPhone series, iPod touch series and iPod nano 6th generation, you need to enter the music menu on your iPhone/iPod/iPad first.

This manual provides the basic instructions of menu navigation on iPhone/iPod/ iPad. For advance operations, please refer to your iPhone/iPod/iPad instructions.

To avoid damaging your iPhone/iPod/iPad or the unit please take care when inserting and removing the cable.

If you charge the iPhone/iPod/iPad while playing music, it may take a longer time. 1st, 2nd & 3rd generation iPods cannot be charged.

charging your iPod / iPhone / iPad1. You can automatically charge the iPhone/iPod/iPad through the unit when it is

connected by a USB cable.

14

AUX IN operation1. Make sure the unit is disconnected at the

mains socket.

2. Use a 3.5mm AUX IN cable to connect your audio device through the AUX IN socket at the rear of the unit.

3. Connect the mains plug to the mains socket and switch the POWER ON/OFF switch at the rear of the unit to the ON position. The unit will enter standby mode. The indicator light will be on but dim to show the unit is in standby mode.

4. Press the STANDBY button on the remote control or the STANDBY/SOURCE button on the unit to switch the unit on.

5. Select AUX IN mode by repeatedly pressing the STANDBY/SOURCE button on the unit or SOURCE button on the remote control. The Aux In indicator will now light brighter to show Aux mode is selected.

6. In AUX IN mode only the VOLUME +/– controls and MUTE button can be controlled using the remote control. Use the controls on the device for all other functions.

maintenance

cleaning the unit• To clean the unit, wipe the case with a slightly moist, lint-free cloth.

• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.

• Do not spray aerosol at or near the radio.

Ensure to unplug the unit from the mains socket before cleaning.

Standby mode and Aux mode use the same indicator.

Standby mode is dim.

Aux mode is bright.

15

specifications

Model ISBT10013

AC power AC 230V ~50Hz

Unit output power 2 x 20W (L/R Speakers)60W (Subwoofer)

Power consumption 130 W

Standby power consumption ≤ 0.5 W

Bluetooth compatibility 2.1EDR

Dimensions Approx. 450(L) x 195(W) x 185(H) mm

Features and specifications are subject to change without prior notice.

If any anomaly is encountered, unplug the mains plug and reconnected again.

hints and tipsIf a problem does occur, it may often be due to something very minor. The following table contains various tips.

Problem Cause / Solution

PowerUnit does not turn on or does not respond to the remote control.

• Make sure the mains plug is connected to the mains socket and switched on at the mains.

• Check that the remote control has a battery. The battery may need to be replaced.

• Make sure that the power switch on the back of the unit is switched to ON.

iPhone/iPod/iPadThe unit doesn’t play files or doesn’t function as expected.

• Make sure the function is set to iPhone/iPod/iPad mode.• Make sure the iPhone/iPod/iPad is connected properly. • Make sure the iPhone/iPod/iPad is switched on.• Volume level may need increasing on the iPhone/iPod/iPad.

Remote ControlNo functions or short range.

• The battery may need to be replaced.• Aim remote directly towards the remote sensor.• Remove any objects that are between the remote control

and sensor.

NFCCan’t connect

• Make sure the HiFi is in Standby or Bluetooth mode before touching the devices together.

• Make sure another NFC device isn’t already connected. If so disconnect the other device.

IB-ISBT10013-160303V4

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by DSG Retail Limited is as an Affiliate under the License held by DSG International Sourcing Ltd. Other trademarks and trade names are those of their respective owners and all rights are acknowledged.

DSG Retail Ltd. (co. no. 504877)1 Portal Way, London, W3 6RS, UK

Notes for battery disposalThe batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste.For more information, please contact the local authority or your retailer where you purchased the product.

For general information about this appliance and handy hints and tips, please visit www.knowhow.com/knowledgebank or call 0344 5611234

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only). Calls charged at National Rate.

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

“Made for iPod,” “Made for iPhone,” and “Made for iPad,”mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the

developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless performance.iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

iPod, iPhone and iPad not included