Product InformationHydraulic power pack TC-HYPU480.001 for use with testControl

PI 4

49 2

.070

3

Range of application

The newly developed hydraulic power pack furtheroptimises specimen gripping. The connection is at thegrips and the load frame via the Zwick/Roellmeasurement and control electronics testControl.

Advantages/Characteristics

The force zero control reliably prevents unrequiredtensile or compression forces, caused by materialbeing displaced or by specimen holder deformation,being applied to the specimen during the close andgripping sequences.

The gripping can be adapted to the specimensproperties and to the test conditions via fourselectable types of operation.

The simple operation and documentation of the testparameter via the test software testXpert ensuresreproducible, operator dependent test conditions.

A maintenance free construction and a long lifespan distinguish this power pack.

Product InformationHydraulic power pack TC-HYPU480.001 for use with testControl

All data at ambient temperature. All rights reserved.

Order item TC-HYPU480.001

Operation and documentation of the test parameter via the test software testXpert

Dimensions (W x H x D) 611 x 772 x 620Max. hydraulic pressure 480 barWeight approx. 150 kgPower rating 1.8 kWSafety EMERGENCY OFF link, CE conformityNoise emission 64 dB; with cooling fan max. 70 dBForce-zero control - Prevents impermissible loading of the specimen during the

close and gripping procedureTypes of operation - Once off setting of the preselected gripping pressure

- Regulation at pressure reduction- Continuous gripping at the preselected gripping pressure- Gripping at a gripping pressure thats proportional to the

current test load (proportionality factor freely selectable)Here is required - CAN-BUS measurement module TC-MOCANBU(it is not

necessary to order another one if this module exists alreadybecause of an automatic extensometer)

- Expanded remote control unit TC-OPRCADV