-29-Pipe Benders

HYDRAULIC PIPE BENDER WITH HINGEDFRAME

Prod. No.

213A

213B

213C

213D

213E

Size in Inches Pump Force in Tons N.Wt. (Kgs.) G.Wt.(Kgs.)

3/8 - 1 7 42.0 60.0

1/2 - 2 15 98.0 110.0

1/2 - 3 16 143.0 163.0

1 - 4 20 312.0 390.0

2 - 6 20 368.0 482.0

Manual operated for long radius heavy gauge ERW pipe bending ideally suitable for 'C' class size 3/8" to 6" gas, water, steam DIN 2440/2441 up to 90° bending & sch 40 on request.

P-213

SPARE BENDING FORMERS OF HINGEDFRAME

SUGGESTION : Bending formers of Prod. No. 213, 215 & 212 are available in Cast Iron, S.G. Iron & M.S. Steel but we recommend S.G.Iron & M.S. Steel formers for long life and durability.

Prod. No. I.D O.D. Wall Thick. O.D. Wall Radius N.Wt.. (Kgs.)Inches (ERW) (ERW) Sch. Thick Sch. mm C.I. M.S.

mm mm 40/80mm 40/80 mm3/8 16.7 3.25 — — 95 1.250 2.3501/2 21.0 3.25 21.3 2.7 - 3.7 95 1.200 2.3003/4 26.4 3.25 26.6 2.8 - 3.9 95 1.200 2.1501 33.2 4.05 33.4 3.3 - 4.5 130 2.000 4.900

1¼ 42.0 4.05 42.1 3.5 - 4.8 165 4.550 4.1501½ 47.8 4.05 48.2 3.6 - 5.0 210 6.600 9.2502 60.3 4.5 60.3 3.9 - 5.5 280 10.750 14.650

2½ 76.1 4.5 73.0 5.1 - 7.0 300 12.250 14.7503 88.9 4.8 88.9 5.5 - 7.6 400 19.900 20.3504 115.0 5.4 114.3 6.0 - 8.5 600 40.000 38.5006 166.0 5.4 168.3 7.1 - 11.0 700 54.000 58.000

214A214B214C214D214E214F214G214H214I214J214L214M214N214O

8 — — 219.1 8.1 - 12.7 1100 165.000 —10 — — 273.0 9.2 - 15.1 1365 244.000 —12 — — 323.8 10.3 - 17.4 1620 192.000 —

R

Bending radius Ris always calculated from the middle of the pipe.M.S. FORMERS

For long radius heavy gauge bending ideally suitable for 'C' class (Sch. 40 pipe) size 3/8" to 6" gas, water, steam DIN 2440/2441 up to 90° bending.

C.I. & S.G.FORMERSP-214

HYDRAULIC MOTORISED PIPE BENDER WITH HINGED FRAME

Prod. No.

215A

215B

215C

215D

Size in Pump Force Motor Power/KW N.Wt. G.Wt.Inches in Tons III Phase 440V & (Kgs.) (Kgs.)

I Phase 220/110V on request

1/2 - 2 15 1.5 130.0 160.0

1/2 - 3 16 1.5 163.0 195.0

1 - 4 20 2.0 337.0 422.0

2 - 6 20 2.0 393.0 514.0

Limit Switch/Stopperon request

Motorised operated for long radius heavy gauge ERW pipe bending ideally suitable for 'C' class size 3/8" to 6" gas, water, steam DIN 2440/2441 up to 90° bending & sch. 40 on request.

P-215

HYDRAULIC MOTORISED PIPE BENDER WITH HINGED FRAME WITH POWER PACK

Prod. No.

212A

212B

212C

212D

Size Motor Power/KW III Phase 440V & N.Wt. G.Wt.in Inches Phase 220/110V on request (Kgs.) (Kgs.)

1/2 - 2 1.5 185.0 250.0

1/2 - 3 1.5 220.0 300.0

1 - 4 1.5 390.0 540.0

2 - 6 1.5 447.0 628.0

212E 4 - 8 3.0 — —

212F 6 - 12 3.0 — —

Foot Control

Lever Control

Limit Switch/Stopperon request

Motorised with power pack for long radius heavy gauge ERW pipe bending ideally suitable for 'C' class size 3/8" to 12" gas, water, steam DIN 2440/2441 up to 90° bending & Sch. 40 & 80 on request

P-212

Manual operated specially self designed for short radius heavy & thin wall thickness bending size 3/8" to 2" gas, water, steam, stainless steel & Conduit upto 180° in two steps.

HYDRAULIC PIPE BENDER WITH DOUBLE FRAME OPEN BENDING

Prod. No.

224A

224B

Size in Inches Pump Force in Tons N.Wt. (Kgs.) G.Wt.(Kgs.)

3/8 - 1¼ 15 180.0 227.0

1/2 - 2 15 230.0 277.0

P-224

Motorised specially self designed for short radius heavy & thin wall thickness bending size 3/8" to 2" gas, water, steam, stainless steel & Conduit upto 180° in two steps.

HYDRAULIC MOTORISED PIPE BENDER WITH DOUBLE FRAME OPEN BENDING

Prod. No.

222A

222B

Size Pump Force Motor Power/KW III Phase 440V & N.Wt. G.Wt.in Inches in Tons I Phase 220/110V on request (Kgs.) (Kgs.)

3/8 - 1¼ 15 1.5 204.0 269.0

1/2 - 2 15 1.5 244.0 309.0

Limit Switch/Stopperon request

P-222