The Style:Quality - Craftsmanship - Pride

The Style:Quality - Craftsmanship - Pride

®

uFIVE-YEAR LIMITED WARRANTYu

wFIV

E-YEAR LIMITED WARR

AN

TYw

E

LLING TRAILERS

3

FT-6DT-E FT-10 DT-HD FT-16-2 DT-DO FT-20-2 DT-U

Manufacturing industrialtrailers since 1974.

DT-100 Since 1974

TRAILERSTRAILERS

D U M PD U M P

HYDRAULIC DUMP SERIESHYDRAULIC DUMP SERIES

Note: FT-6, 7DT-E standard w/single hydraulic cylinder, FT-10DT-E 10’-12’ standard w/single hydraulic cylinder - 14’ standard w/twinhydraulic cylinders, FT-12 DT-E 12’ standard w/single hydraulic cylinder - 14’ standard w/twin hydraulic cylinders - 16’ standard

w/heavy duty scissor hoist. FT-14 DT-E come standard with a heavy duty scissor hoist.

DT-E SERIES TRAILERSDT-E SERIES TRAILERS

®The standardHydraulic Dump or “DT-E” Series isa heavy duty dump trailer built tohandle the big jobs. The dump box isplaced between the wheels allowing alower profile thereby allowing easierloading and a lower center of gravity.Stop and compare our product withour competitors and you will see foryourself why is a leader in trailer design and durability. The“DT-E” Series dump trailers are available inGVWRs ranging from 6,000 to 16,000 pounds.

®

MODEL STD. Deck Length GVWR Wheels Tires Axle Rating

FT-6DT-E 8’ - 12’ 6,000# 6 hole mod ST225/75R15 LRD 1 - 6,000#

FT-7DT-E 10’ - 12’ 8,000# 5 hole mod ST225/75R15 LRD 2 - 3,500#

FT-10DT-E 10’ - 14’ 9,980# 6 hole mod ST225/75R15 LRD 2 - 6,000#

FT-12DT-E 12’ - 16’ 13,800# 8 hole mod ST235/80R16 LRE 2 - 6,000#

FT-14DT-E 12’ - 16’ 16,000# 8 hole mod ST235/80R16 LRE 2 - 7,000#

Shown aboveand to the rightis the FT-6DT-E

with optionalspare tire.

Shown aboveand below is the

FT-7DT-E withstandard 76”deck width.

Shown above is the FT-6DT-E with optional 5’ Landscape Gate.

Shown above is the FT-12DT-E with optional tool box.

Page 2Some models may be shown with optional equipment.

DT-HD SERIES TRAILERSDT-HD SERIES TRAILERS

Page 3

®

Note: FT-10DT-HD 10’-12’ length is standard with a single hydraulic cylinder - 14’ is standard with twin hydraulic cylinders, the FT-12DT-HD thru the FT-16DT-HD are standard with a heavy duty scissor hoist and all are standard with 5’ 5” slide-out ramps, 80” ID, and double rear swing-out doors.

Some models may be shown with optional equipment.

MODEL STD. Deck Length GVWR Wheels Tires Axle Rating

FT-10DT-HD 10’ - 14’ 9,980# 6 hole mod ST225/75R15 LRD 2 - 6,000#

FT-12DT-HD 12’ - 16’ 13,800# 8 hole mod ST235/80R16 LRE 2 - 6,000#

FT-14DT-HD 12’ - 16’ 16,000# 8 hole mod ST235/80R16 LRE 2 - 7,000#

FT-16DT-HD 12’ - 18’ 18,000# 8 hole plate 215/75R17.5 LRH 2 - 8,000#

The “DT-HD” Series; Skid-steer - Dump Trailer wasdesigned as a multi-usetrailer which you can useto haul both your Skid-steer (slide-out ramps) andother cargo (eg. rocks,cement chunks, landscapewaste, etc.) It serves asboth a Skid-steer and adump trailer in one. The“DT-HD” Series dumptrailers are available inGVWRs ranging from 9,980to 18,000 pounds.

Shown to the left is the FT-16DT-HD. Aboveis the FT-16DT-HD with Optional 44” Tall

Sides, Spare Wheel and Tire with Mount and1/2” Tarp Tie Rod around all four sides.

To the left: FT-12DT-HD withSTD double rear swing-out doorsand 10 ton scissor hoist.Shown above: Standard rampswith storage under the dump box.

To the left is the FT-14DT-HD

Shown above is the FT-14DT-HD with optional gooseneck.

Just imagine the amount of time and money that will be savedover time. The versatility of this model makes it the best seller in the Hydraulic Dump Trailer Line.®

DECK-OVER DUMP TRAILERSDECK-OVER DUMP TRAILERS

MODEL STD. Deck Length GVWR Wheels Tires Axle Rating

FT-12-2 DT 12’ - 14’ 15,000# 8 hole mod ST235/80R16 LRE 2 - 6,000#

FT-14-2 DT 12’ - 16’ 17,500# 8 hole mod ST235/80R16 LRE 2 - 7,000#

FT-16-2 DT 14’ - 18’ 20,000# 8 hole plate LT215/75R17.5 LRH 2 - 8,000#

Page 4Some models may be shown with optional equipment.

®

Note: The FT-12-2 DT, FT-14-2 DT and FT-16-2 DT-DO are standard with aheavy duty scissor hoist, 96” OD and double-acting spreader end gate.

Shown above and to the right is theFT-16-2 DT with optional 44” solidfixed sides.

Shown to left and above is the FT-16-2 DT with optional Gooseneck.

The Deck-Over HydraulicDump Trailer, or the “DT-DO” Seriesfeatures a wider box since the box doesnot have to be contained between thewheels. The box is positionedabove the wheels allowing awider stance thus giving alarger payload capacity.The “DT-DO” Series dumptrailers are available in GVWRsranging from 15,000 to 20,000 pounds.

Shown to the leftis the FT-14-2 DT

with optional140,000# twin

2-speedlanding gear.

Page 5

CONTRACTOR & UTILITY DUMP TRAILERSCONTRACTOR & UTILITY DUMP TRAILERS

Some models may be shown with optional equipment.

MODEL STD. Deck Length GVWR Wheels Tires Axle Rating

FT-18-2 DT-C 14’ - 16’ 22,500# Budd ST235/80R16 LRE 2 - 9,000#

FT-18-2 DT-U 14’ - 18’ 22,500# Budd ST235/80R16 LRE 2 - 9,000#

FT-20-2 DT-C 14’ - 18’ 25,900# Budd ST235/80R16 LRE 2 - 10,000#

FT-20-2 DT-U 14’ - 18’ 25,900# Budd ST235/80R16 LRE 2 - 10,000#

FT-24-2 DT-C 14’ - 20’ 30,000# Budd ST235/80R16 LRE 2 - 12,000#

FT-24-2 DT-U 14’ - 20’ 30,000# Budd ST235/80R16 LRE 2 - 12,000#

FT-30-2 DT-C 14’ - 24’ 40,000# Hub Pilot LT215/75R17.5 LRH 2 - 15,000#

FT-30-2 DT-U 14’ - 24’ 40,000# Hub Pilot LT215/75R17.5 LRH 2 - 15,000#

®

®

The “DT-C” Series; Contractor Body DumpTrailer was designed to be versatile on and off the job site. It comes standard with 14” hinged sides and extensionbrackets so you can load and unload materials easily.This model is also standard with a 20” double-acting spreader end gate. The “DT-U” Series; Utility/Grain Body Dump Trailerwas designed with the demolition and small grainhauler in mind, great for hauling the big loads.Standard with 10 gauge sides with a 7 gauge floor,50” high steel sides, tie rail on 4 sides and a singleswing spreader/dump gate. The “DT-C” and “DT-U” Series dump trailers are available in GVWRs ranging from 22,500 to 40,000 pounds.

®

Shown above: FT-30-2 DT-U (Utility/Grain Body) with Optional Gooseneck.

Shown above: FT-18-2 DT-U (Contractor Body)

Standard Single Swing Spreader/Dump Gate

Shown above: FT-20-2 DT-C (Contractor Body) with optionalGooseneck, 6’ x 8’ deck, spare wheel & tire, Under deck rampstorage and ramps.

®

Trailers’ has the “best paint job in theindustry”, with a 3 year paint warranty along with a5 year structural warranty. All Trailersare steel shot blasted prior to being painted, then a5-coat paint process is electrostaticly applied in ourstate of the art painting facility.

FT-20-2 DT-U (Utility/Grain Body) with Std.Single Swing Spreader/Dump Gate.

Page 6

GAS ENGINE & SIDE DUMP TRAILERSGAS ENGINE & SIDE DUMP TRAILERS

Some models may be shown with optional equipment.

Double-ActingSpreader Gateopens from eitherthe top of thedump box (shownabove.) Or opensfrom the base ofthe dump box(shown on theleft.)

The Trailers’ “Side Dump” landscape trailer is an asset to any landscaper’s fleet. The “Side Dump” trailereliminates the need for multiple trailers to meet your needs for hauling and removal all in one, with payload capacities rang-ing from 3,000 to 5,000 lbs. Standard with split-full width spring-assist ramps, this trailer is accommodating to skid-steersand narrow equipment/machines with smaller tires such as lawnmowers, sod cutters, curb machines, sweepers, etc.

SIDE DUMP SERIES “LANDSCAPER’S DELIGHT”

®

MODEL STD. Deck Length GVWR Wheels Tires Axle RatingFT-12DT-HD 5’ + 14’ or 5’ + 16’ 13,800# 8 hole mod ST235/80R16 LRE 2 - 6,000#FT-14DT-HD 5’ + 14’ or 5’ + 16’ 16,000# 8 hole mod ST235/80R16 LRE 2 - 7,000#FT-16DT-HD 5’ + 14’ or 5’ + 16’ 18,000# 8 hole plate 215/75R17.5 LRH 2 - 8,000#

Model shown isthe FT-14DE-SD.

®

FT-12DT HD

Each Gas Engine Dump Trailer is powered by small engine with a hydraulic unit mounted to the tongue of the dump trailer.

Trailers offers a multitude of features toensure that we have the trailer to meet your needs. TheGas Engine Hydraulic Dump Trailer has been designedfor those who use their dump trailers non-stop andcan’t afford the delay a dead battery may cause.Thistrailer gives you unlimited power, you can workyour dump all day without having to stop andrecharge a battery. This feature is great forrental yards, the gas engine will keep thetrailer running day in and day out withoutthe hassle of making sure a battery is fullycharged for the next customer.

OPTIONAL FEATURESOPTIONAL FEATURES

Double Rear Spreader Gate Spare Wheel & Tire

Gooseneck with 6’ x 8’Top Deck

Grain Doors in Dump Gate Doors

Under deck Ramp Storage and Aluminum Ramps

Spreader with Landscape Gate Double-Acting Spreader End Gate (STD on DT-E and DT-DO)

These are just some of the options available for the Dump Trailers. ContactTrailers or one of our dealers to find out more about the multitude of options available to customize a

Dump Trailer to your exact needs.

® ®

®

Double Rear Swing-Out Gate(STD on DT-HD)

Page 7Some models may be shown with optional equipment.

© 2008 Felling Trailers, Inc. Form No. 150-30 5/08 Printed in U.S.A.

1525 Main Street SouthSauk Centre, MN 56378(320) 352-5239 • (320) 352-5230 FAXMerle J. Felling, PresidentCheck out our Web Site at: www.felling.comE-mail us at: trailers@felling.com

Call 1-800-245-2809 for your nearest dealer

Your TRAILER Dealer:®

To learn more about us, have us mail you a specific full color brochure, or locate your nearestdealer, go to www.felling.com or give us a call at 1-800-245-2809.®

®