hybrid sliding door...maximum door heights 2400mm maximum door panels 1200mm 7 optional heavy duty...
TRANSCRIPT
-
Trend thermAL® Hybrid
Sliding DoorTECHNICAL DATA
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
Features & Benefits
Size Range
Ordering Details
Installation
Cross Sectional Views
1Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
-
2Please note that drawings are not to scale
Features & BenefitsTrend thermAL® Sliding Door
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
1 Glazing Trend thermAL® is designed to
accommodate up to 24mm double glazed units for maximum energy efficiency. With over 60 different glazing options there is a solution for any climate in Australia.
Among the lowest U-Values and SHGC available but at a significantly lower cost when compared to similar systems.
U-Value down to 2.5 SHGC range from 0.65 - 0.36 Cooling Efficiency 62% Heating Efficiency 56%
2 Composition Aluminium external surface for maximum strength which can be powder coated in a range of
standard and designer colours for a bold external finish
Rigid polymer ERP is available in 3 standard steadfast colours to complement internal finishes with a subtle appearance but complementing the external finish.
Rigid polymer ERP internal surface designed to reduce energy transfer for highest energy efficiency
Rigid polymer ERP is impact modified to ensure minimal damage even during construction.
Rigid polymer ERP is pre–stressed to eliminate excessive shrinkage or expansion and is also UV stabilised to withstand the harsh Australian climates
3 Locks Trend thermAL® Sliding doors are
fitted with double cylinder deadlock as standard and has a double parrot beak with a 2 point locking system. Striker plate is mounted with full fixing to jamb for added security.
4 Safety Glazing Toughened Safety A Grade glass
with a visual motif at the mid point to provide added safety.
5 Heavy Duty Rollers Trend thermAL® door uses a heavy
duty, double bogey roller system for smooth operation.
The marine alloy aluminium carriage reduces the chance of corrosion ensuring a long and smoother operation.
6 Frames Maximum Door Heights 2400mm Maximum Door Panels 1200mm
7 Optional Heavy Duty Barrier and Insect Screen Door
The sturdy extruded aluminium, external sliding flydoor is fitted with spring loaded acetal wheels that ensure the insect screen door stays on the track and opens smoothly.
8 Options Wide range of powdercoat finishes
available including timber powdercoat finishes.
ERP Colours Anodic Natural Matt White Matt Stone Beige
9 Protective Wrapping Protective wrapping for delivery
to site is a standard for all Trend thermAL® products.
Bushfire protection up to BAL-29
-
Size RangeTrend thermAL® Sliding Door
3Please note that drawings are not to scaleConfidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
All windows and doors are designed to 700pa velocity and 200pa water rating. For higher ratings consult Trend® Windows & Doors
2100
2160
1510
1570
1810
1870
2110
2170
2410
2470
STUD
OPE
NING
DOOR
SIZE
2992
3052
3593
3653
STUD
OPE
NING
DOOR
SIZE
4192
4252
4792
4852
2100
2160
TAXD2130
TAXD2115
*Max height available 2400mm
TAXD2118 TAXD2121 TAXD2124
TAXD2136 TAXD2142 TAXD2148
-
Ordering DetailsTrend thermAL® Sliding Door
4Please note that drawings are not to scaleConfidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
All doors are illustrated as viewed from outside.
Codes shown are for plain doors. The first two numbers of code indicate approximate height, the last two numbers indicate approximate width.
Manufactured from aluminium and Rigid Polymer extrusion.
Sash Style Options:Standard option, eg door TAXD2118
Configuration Options: XXF = Sliding/Sliding/Fixed FXX = Fixed/Sliding/Sliding FXXF = Fixed/Sliding/Sliding/Fixed
Pa refers to Pascal rating (wind pressure)
Aluminium exterior and Extruded Rigid Polymer (ERP) interior. ERP interior skin is available in three colours - white, anodic natural matt and stone beige
The aluminium sill and external brick skin must be separated with an isolator to prevent possible reaction between brick and mortar and the aluminium frame which can lead to crevice corrosion.
General:Black hardware is supplied as standardOption:Two panel doors is available as reverse to what is shown on size range chart
Two lite door available in reverse to what is shown on the size range chart.
Note:For information on different glass types or wind ratings, plase contact a Trend Windows & Doors sales representative.
-
InstallationTrend thermAL® Sliding Door | Building In Detail | Brick Veneer - 230mm wall
5Please note that drawings are not to scaleConfidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
-
6Please note that drawings are not to scale
InstallationTrend thermAL® Sliding Door | Building In Detail | Double Brick - 280mm wall
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
-
7Please note that drawings are not to scale
InstallationTrend thermAL® Sliding Door Window | Building In Detail | Aluminium Cladding on Studs
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
-
8Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Sliding Door |
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
2 Lite - Double Glazed
HEAD
OUTSIDE
SILLSILL
HEAD
OUTSIDE
44
29134 20
93
8
38
82
29134
37
82448
74
13429
70
-
9Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Sliding Door |
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
OUTSIDEJAMB
OUTSIDE
JAMB
13428
14 14
23
4514
51
7584
2 Lite - Double Glazed
-
10Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Sliding Door |
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
HEAD
OUTSIDE
SILLSILL
HEAD
OUTSIDE
44
29134 20
93
8
38
82
29134
37
82448
74
13429
70
4 Lite - Double Glazed
-
11Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Sliding Door |
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Sliding Door | TAXD | Mk-1 | 30 Nov 2012
OUTSIDEJAMB
OUTSIDEJAMB
14 14
23
45
7515
014 14
37
4510
4
45
13428
4 Lite - Double Glazed