hybrid dental solutions - golden...

54

Information

Dental Implants

Prosthetic Accessories

Transfer and Analog Devices

Surgical Kits and Tools

Drilling Protocol

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-55

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-59

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-63

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-69

CONTENT:

TECHNICAL CATALOGUE

Please visit our website:

www.sgs-dental.com

Hybrid Dental Solutions

6 7

IMPLANTOLOGY

Implantology is the epitome of restoration dentistry, ensuring the functional and aesthetical replacement of lost teeth. Long term studies show that implants, when properly placed and cared for, enjoy a lifespan comparable to that of natural teeth. Hence it is no wonder that implantology continues to gain prominence throughout the world of dentistry.

Titanium alloy - The material of choice

All SGS Dental Systems' implants are made of the titanium alloy Ti-6Al-4V ELI, in accordance with ASTM-F136-02. Titanium has proven to be the ideal implant material for many reasons, perhaps the most important being its ability to integrate almost completely with the bone. In addition to being «bio-friendly» it enjoys favorable mechanical qualities (strength, endurance) and can be precisely fabricated (precision measured in microns) to ensure a range of implants that meet the requirements for optimizing stability in the widest range of patients (taking into account the dimensions and state of health of an individual’s bone and gums).

Clinical results with the BONITex®- SurfaceAnimal trial (University Erlangen)(Clinic for Maxillofacial Surgery, Director: Prof. Dr. Dr. F.W.Neukam, PD Dr. Dr. K. A. Schlegel)• 24 Minipigs with 9 implants implanted into the Os frontale• Histology, Microradiography and Immunhistochemistry after several time points postoperatively• Evaluation of the BIC-Data in the cervical as well as in the apical implant area (BIC= Bone Implant Contact)

Results• significant increased BIC-Data in the spongiosa-area after 14 and 30 days• significant increase of Osteocalcin-expression after 30 days • BIC-Data during the further remodeling process between 40-60%

SummaryThe implants with the BONITex-surface showed between 14 and 30 days a significant increased Bone-Implant-Contact (BIC) in the spongiosa. In the further course within the bony remodeling BIC-Data in the range between 40-60% arised, which conforms to the data described in the literature. After 30 days the osteocalcin –expression too was significant increased by the implants with the BONITex-surface.

A New MICrOSTruCTureD BIOACTIve SurfACe fOr IMPLANTSBONITex® is a HA-blasted, acid etched, bioactive surface, which describes a combination of a structured surface and a completely resorbable microcrystalline, adhesive CaP-layer.

Characterization of the Surface:

• micro- and nanostructured surfacetopography due to HA-blasting and acid etching• Bioactive, resorbable CaP-coating for further surface enlargement

A CB D

SterilitySGS Dental Systems’ implants undergo a strict sterilization process, including exposure to Gamma irradiation (at a level of 2.5 mrad) as stipulated in «Sterilization of medical devices - Validation and routine control of sterilization by irradiation - EN 552 (1994)”. Samples are tested for sterility using USP 24 procedures for medical devices (membrane filtration method). Irradiated finished products also undergo «Bio-Burden test - ISO 11637-1» to assure sterilization.

fatigue testingThe mechanical strength (fatigue test) of SGS Dental Systems’ implants was tested according to the “Class II Special Control Guidance Document: Root form Endosseous Implants and Abutments: Draft Guidance for Industry and FDA” at the Metallurgical Lab of the «Technion Research and Development Foundation». These implants were found to be highly resistant to fatigue under extreme mechanical loading forces.

Product guaranteeSGS Dental Systems guarantees all its products for a period of 15 years when used in accordance with the supplied Instructions for Use and the company's protocols.

Calciumphosphat-crystallite

0102030405060708090

100

3 Ta

ge

7 Ta

ge

14 T

age

21 T

age

30 T

age

56 T

age

84 T

age

180

Tage

B IC-Wert (Ko rtikalis)

BIC-Wert (Spo ngios a)

Osteocalcin, 14 days Osteocalcin, 30 days

8 9

restoration Options

SGS Dental Systems offers the widest range of tools and devices for oral restoration, ensuring that dental solutions can be offered to meet your patient's needs. Prosthetic accessories are suitable for all the implants with an internal hex. The abutments are available in two platforms – narrow (for implants with diameters of 3.25, 3.75 & 4.2mm) and wide (for implants with diameters of 4.5, 5 & 6 mm). All of the abutments have internal threading, which ensures that the fit will not loosen, strengthens the neck of the abutment and allows their removal by friction. Due to the precise interface between the implant and the abutment, which are designed to withstand the pressures in the mouth, the result is a very high rate of success of the implants over the years.Prior to the restoration in two-piece implants (P1 & P7), remove the cover screw or healing cap. Complete the screwing motion with a torque wrench (R8) up to 30 Ncm. (If you choose the P9S or P7S abutments with a secondary upper screw, tighten it using up to 20 Ncm.)

Double Platform Implants* - The Complete fit!

SGS Dental Systems, Ltd. offers a patented solution for a bridge which is screwed onto non-parallel implants. SGS Dental Systems' Research and Development team has developed an implant with a Flat Connection platform. The implant looks the same as all other SGS Dental Systems' implants from the outside. Inside, however, are two platforms.

The original deep hexagonal platform remains for connection to regular abutments, but a second shallow and round platform is also found inside which facilitates the Complete Fit of a Flat Connection abutment to the implant. The Flat Connection abutment is placed inside and screwed into the implant instead of a regular abutment. This new technology allows for a shorter «Path of Insertion» for the placement of the abutment.

Development of this new generation of implants will maximize surgical options without concern for the possible limitations of the future rehabilitation stage. If the reconstruction dentist decides to carry out the rehabilitation on a single implant, a regular abutment can be used. If he decides to carry out the rehabilitation following a series of multiple divergent implants, however, a Complete Fit can be achieved through the use of our Flat Connection Abutments.

Super Lock®

When an abutment is annexed to an implant using a screw it generates internal forces: the screw is stretched under tension (force T) when the abutment is forced downwards (Force Fh) by the head of the screw, and the threading action pulls the implant upwards (Force Ft). Thus the screw causes interactive forces (Fr) between the conical ring at the bottom of the abutment and the conical crater on the upper part of the implant (Figure 1). This structure resists pure vertical.

Figure 2 illustrates how the implant is supposed to react to the pressures generated by side loading of the abutment. Integrative forces F1& F2 balance the side force F. Hence the hex on the bottom of the abutment needs to precisely match the hex hole of the implant. Any margin will cause the tightening screw to bear a heavy burden and it will either bend or be lengthened, and the abutment will become loose.

ABuTMeNT

IMPLANT

10 11

The uNIque PrODuCTS Of SGS DeNTAL SYSTeMS, whICh SeT uS APArT frOM OTher COMPANIeS:

«Groovy Implants»The P1, P7 and P7S implants have grooves, or deep threading, on the neck. This sharp threading enables implant self-retention and assures:• Innovative design• Increased surface area• Deep threading• Fast & strong osseointegration• The best grip• Prevention of future bone absorption• Even more precise work• Elastic joint between implant and abutment• Ensure the equal distribution of burdens and long-term success• Prevention of release and breakage of screws

Short ImplantsThese short implants have proven to be very successful. The P7 implants with diameters of 4.5mm, 5mm & 6mm and all diameters of the P7S implants are available in the especially short length of 6mm.The major advantages are:• Excellent initial stability and retention even in sparse bone zones• Deep and sharp threading which enables implant selfretention• The entire neck of the implant is delicately threaded in order to prevent bone retraction• Recommended for soft bone and optimal for use in mildly dense bone• Implantation performed without the need for sinus lifting• Prevention of release and breakage of screws

Long ImplantsThese extra long Screw Type Implants come in lengths of 18mm and 20mm. These implants are offered in the 4.2mm diameter of the P1 Screw Type Implant: P1-4.2,18 and P1-4.2,20.

However, as some margin is required, since the hex of the abutment must slide into the hole of the implant, we offer the Super Lock system. The external dimension of the Super Lock abutment neck is slightly larger than the internal dimension of the implant's hexagonal receptacle part. Nevertheless since the hexagonal neck of the Super Lock abutment is gently sliced longitudinally by tiny radial spaces in its sides, the slices gently bend inward when theabutment is forced into the implant, thereby decreasing its external dimension and allowing it to enter the 'poky' hexagonal receptacle part. When the abutment is manually inserted into its place it remains steady, reserving two free hands for tightening the screw and/or anything else that may be required. A tight fit is created between the internal walls of the implant's hexagonal receptacle part and the external walls of the abutment's hexagonal neck when the affixing screw is tightened.

Super Lock Abutment removal

Release of the abutment, which is firmly fixed in the holeof the implant, requires the use of a special tool, becauseeven after opening the screw the abutment remains tightly bound to the implant. (Even the application of normative force will not free it.) After the screw which secured the abutment is removed, the extraction screw (K7) is used (as shown in fig. 4) to release the abutment. The heads of the tightening screw and extraction screw are identical and therefore the same wrench is used for both. After the abutment is released the extraction screw must be removed and the tightening screw returned to its place.Strict precision demands (within 5 microns) both for the implant hole and the neck of the abutment, ensure the long-term, problem-free connection between them.

12

P9 ImplantsThe P9 is a thin implant with a replaceable ball attachment on top. It is the only thin implant available on the market with interchangeable prosthetic parts. Available in diameters of 3mm & 3.2mm. Its primary advantages are:• Appropriate for immediate loading Suitable for use on narrow ridges or between closely spaced teeth / implants / between permanent implants for temporary restorations• Optimal usage for mild and dense bones• The height of the Ball Attachment can be changed as required by the patient's gum line• The ability to replace the ball attachment prevents the regular wear on ball attachments

NEWP7–D3.2Another smart innovation from SGS Dental Systems that joinsup our narrow implants' family.• An especially narrow implant designated for narrow ridges.• A narrow spiral implant with a standard rehabilitation platform (internal hexagon - 2.5mm).• The rehabilitation is done using standard platforms.• Double platform (registered patent) - a standard and a flat one in one implant.• The implant is manufactured using bioresorbable blasting. • Bioresorbable Blasting to the surface area of the implant is an innovative and unique development that encourages the fast growth of the bone aside the implant and shortens the healing time significantly.

P7 3.2mm P9 3mm P9S 3mm

NEW

14 15

P1 SCrew TYPe GrOOvY IMPLANT

Pa

Pb

Clip Carrier

Cover Screw

Narrow platform (3.75 mm)

H

D

PL

Screw Type Groovy Implant: While two-stage implants can be used with all types of bones, their optimal usage is with wide and dense bone. P1 implants have double and dense threading.Available in narrow (3.75 mm) and wide (4.5 mm) platforms.They are used in multi-implant restoration.Immediate loading is optional. All the restoration components are compatible.Extra long implants with lengths of 18 mm and 20 mm offered in the 4.2 mm diameter of the P1 Screw Type Groovy Implant.

1200– Drill speed (rpm) 1500Diameter Ø1.9

13 mm

P1b3.25

P1b3.75

P1b4.2

P1b4.5

P1b5

P1b6

900– 1200

Ø2.0

500– 700

Ø2.8

400– 700

Ø3.2

400– 600

Ø3.65

400– 600

Ø4.2

300– 500

Ø5.2

ALL IMPLANTS

After good surgical exposure of the bony surface the position for the implant should be determined and a guide hole should be made using our round head burr taken down into the cortical bone to the level of the neck beneath the burr head. Do not attempt to drill deeper with the round burr. Using the guide hole for position, the color-coded drill bits will be utilized to drill the hole to the desired depth. The color-coding on the bits indicates the diameter of the bit. Almost all drilling (excluding all P9S implants, P7-3.75 & P7S-3.75) should commence using the 2.0 mm bit. The bits are used in graduating order to slowly increase the diameter of the implant hole until the desired diameter is reached. This will allow a safe progression and decrease trauma to the surrounding bony structures. The accurate depth of the hole is determined by the length of each particular implant and is indicated by the depth lines around each bit, in order to allow good position of the implant in the bone so that its end is flush with the alveolar ridge.

P1 Protocol

The final diameter of the hole should be one half millimeter smaller than the implant diameter (e.g. for an implant with a diameter of 3.75 mm, the final bit size would be 3.2 mm). Table 1 below summarizes the final color-coded drill for each implant.

15

P1

CAT No. H 2.5 mm

P 0.6 mm

P1-3.25, 8-16 3.25 8 10 11.5 13 16

L(mm)

P1-3.75, 8-16 3.75 8 10 11.5 13 16

P1-4.2, 8-20 4.2 8 10 11.5 13 16 18 20

P1-5.8-16 5 8 10 11.5 13 16

P1-6.8-16 6 8 10 11.5 13 16

D(mm)

TABLE 1

P13.25 3.75 4.2 4.5 5 6Ø2.8 Ø3.2 Ø3.65 Ø3.65 Ø4.2 Ø5.2

Red Blue Green Green Black Brown

16 17

P7 CONICAL GrOOvY IMPLANT

Pa

Pb

Clip Carrier

Cover Screw


H

D1

P=1.2 mm

L

• Enables a mass growth of the cortical bone that surrounds the implant.• A groovy implant that enables a better grip of the bone.• Designed in a way that prevents a future regression of the different types of bone.• Facilitates in the organic growth of the bone to it.• Composed of two platforms, a flat and a deep one that shortens significantly the patient's healing period due to the surface area of the implant.• The surface is produced using biological means that encourages a fast growth of the bone and an optimal connection between the teeth and the implant.• Sharp and deep screwing that facilitate an outstanding prelimi- nary stability, increases the surface area and assists in the prevention of the trauma to the bone, enabling the patient's swift recovery.• Consists of a Switch Platform – a uniform platform for all the diameters.• A conical implant as the tooth's root Specially designed to enables the change of direction during the implantation.

D

• The implant «finds the way» and first retention is excellent even in sparse bone zones.• The entire neck of the implant is delicately threaded in order to prevent bone retraction.• All of the restoration components are compatible.• Extra short implants with a length of 6 mm are offered in the 4.5, 5 and 6 mm diameters of the P7 Conical Groovy Implant.

P7, P7S Protocol

The bottom part of P7S is identical to P7, thus they share the same instructions. The best conical hole for the planned conical implant is achieved by using the appointed conical drilling bit. All bits, with the exception of the final regular bit, are inserted in turn till the required depth line reaches the alveolar ridge. The final regular bit is inserted lightly to a depth of only 2mm. The drilling protocols of tapered holes for different implants are presented in Table 2.

The most efficient method of drilling has been found to be achieved through the use of conical drilling bits. We highly recommend that our customers acquire the conical drilling bits. The conical drilling bit for each diameter is suitable for every implant length in that diameter!Where the conical drilling bits are not available, it is possible to achieve the desired tapering of the hole by redrilling with two slighter larger bits taken down to only a partial depth. The first bit, slightly larger than the bit used to reach the desired depth of the implant hole, drills only ~2/3 of the total depth and the second, slightly larger than the first, drills only ~1/3 of depth, thus creating a staged or conical tapered hole. The drilling protocols of tapered holes for different implants are presented in Table 3.

P7

Short Implant

CAT No. H 2.5 mm

P 1.2 mm

P7-3.2, 10-16 3.2 2.45 10 11.5 13 16

L(mm)

P7-3.75, 8-16 3.75 2.75 8 10 11.5 13 16

P7-4.2, 8-16 4.2 3.2 8 10 11.5 13 16

P7-4.5, 6-16 4.5 3.5 6 8 10 11.5 13 16

P7-5.6-16 5 4 6 8 10 11.5 13 16

P7-6.6-16 6 5 6 8 10 11.5 13 16

D1(mm)

D(mm)

The final drilling sequence for optimal implant position in bone:TABLE 3

P7 P7S 3.2 3.75 4.2 4.5 5 6Full depth Ø2 Ø2 Ø2.8 Ø2.8 Ø3.2 Ø3.652/3 depth Ø2.5 Ø2.8 Ø3.2 Ø3.2 Ø3.65 Ø4.21/3 depth Ø2.8 Ø3.2 Ø3.65 Ø3.65 Ø4.2 Ø5.2


13 mm

P73.75

P7S3.75

P74.24.5

P7S4.24.5

P75

P7S5

P76

P7S6


900– 1200

Ø2.0

500– 700

Ø2.8

400– 700

Ø3.2

400– 600

Ø3.65

400– 600

Ø4.2

300– 500

Ø5.2

P73.2

TABLE 2

P7 P7S 3.2 3.75 4.2 4.5 5 6Preceding

Regular bits Ø2 Ø2 Ø2Ø2.5

Ø2Ø2.5

Ø2Ø2.5

Ø2Ø2.8

Conical bit (TDC) Ø2.4 Ø3.2 Ø3.2 Ø3.2 Ø3.2 Ø4

Final regular bit – – Ø3.65 Ø3.65 Ø4.2 Ø5.2

Yellow Blue Green Green Black Brown

18 19

Integral Groovy Implant: (Smart Implant) One-piece implant combining implant and abutment in conical form. Suitable for immediate loading where there is enough bone in both dimensions (height and width) as in post-extraction sockets. Advantages: quick insertion; increased strength due to unified structure; ideal for non-surgical approach; works as a closed system without gum incisions, reducing risk of infections. Their optimal usage is for mild and dense bone and they are recommended for use with soft bones. The restoration componentsare limited to casting only. The mechanical preparations (grinding) are optional but are only to be done in the patient’s mouth, not in the lab.Extra short implants with a length of 6 mm are offered in the 3.75, 4.2, 5 and 6 mm diameters of the P7S Integral Implant.

D

D1

P=1.2 mm

L

L1

Intergral ImplantCarrier

P7sa

CAT No. H 8 mm

P 1.2 mm

P7S-3.2, 6-16 3.2 2.45 8 10 11.5 13 16

L(mm)

P7S-3.75, 6-16 3.75 2.75 6 8 10 11.5 13 16

P7S-4.2, 6-16 4.2 3.2 6 8 10 11.5 13 16

P7S-5.6-16 5 4 6 8 10 11.5 13 16

P7S-6.6-16 6 5 6 8 10 11.5 13 16

D1(mm)

D(mm)

INTeGrAL GrOOvY IMPLANTP7S

Short Implant

P7SP7, P7S Protocol

The bottom part of P7S is identical to P7, thus they share the same instructions. The best conical hole for the planned conical implant is achieved by using the appointed conical drilling bit. All bits, with the exception of the final regular bit, are inserted in turn till the required depth line reaches the alveolar ridge. The final regular bit is inserted lightly to a depth of only 2mm. The drilling protocols of tapered holes for different implants are presented in Table 2.


The final drilling sequence for optimal implant position in bone:TABLE 3



13 mm

P73.75

P7S3.75

P74.24.5

P7S4.24.5

P75

P7S5

P76

P7S6


900– 1200

Ø2.0

500– 700

Ø2.8

400– 700

Ø3.2

400– 600

Ø3.65

400– 600

Ø4.2

300– 500

Ø5.2

P73.2

TABLE 2

P7 P7S 3.2 3.75 4.2 4.5 5 6Preceding


Ø2Ø2.5

Ø2Ø2.5

Ø2Ø2.8

Conical bit (TDC) Ø2.4 Ø3.2 Ø3.2 Ø3.2 Ø3.2 Ø4

Final regular bit – – Ø3.65 Ø3.65 Ø4.2 Ø5.2

Yellow Blue Green Green Black Brown

20 21

Thin Implant with Ball Attachment: A two-piece, one-stage thin implant with a replaceable ball attachment on top.Appropriate for immediate loading. The height of the ball attachment can be changed as is required by the gum line of the patient, and this flexibility prevents the regular wear on ball attachments. In a rare case of need the upper ball could be replaced.

P9aaScrew

P9aIntegral ImplantDriver

H-P9.3

Healing Cap Optional Elements:

S3-P9.1 S3-P9.2 S3-P9.3 SP-P9 S1-P9 S2-P9 A1-P9 T1-P9

D

D1

PL

L1

ThIN IMPLANT wITh BALL ATTAChMeNTP9P9 Protocol

Preferably, the 2.4 mm conical drill bit is inserted till the required depth line reaches the alveolar ridge. Where the 2.4 mm conical drill bit is not available, it is possible to use the regular 2.0 mm drill bit instead, but it should be inserted only till the depth line below the nominal one reaches the alveolar ridge.

Drill speed 1200– (rpm) 1500Diameter Ø1.9

13 mm

500– 700

Ø2.0

500– 700

Ø2.4

P9P9S2,4

P9P9S3,0

P9P9S3,2

P9

CAT No. P 1.5 mm

P9-2.4, 13/16 2.4 1.5 10 11.5 13 16L

(mm)P9-3, 10-16 3 2 10 11.5 13 16

P9-3.2, 10-16 3.2 2.4 10 11.5 13 16

D1(mm)

D(mm)

22 23

P9S ThIN INTeGrAL IMPLANT

D1

P

Thin integral implant: a thin, conical, one-piece implant combining implant and abutment. Intended for narrow alveolar ridges with sufficient depth. Appropriate for immediate loading.Advantages: suitable for use on narrow ridges, or between closely spaced teeth or implants and of course between permanent implants for temporary restoration.Their optimal usage is for mild and dense bones and they are optional for use with soft bones. The restoration components are limited to casting only. The mechanical preparations (grinding) are optional but are only to be done in the patient’s mouth, not in the lab.

D

L

L1

P9SaIntergral ImplantCarrier

A1–P9S T1–P9S

ImplantAnalog

Transfer For Thin Integral

Implant

P9, P9S Protocol

Preferably, the 2.4 mm conical drill bit is inserted till the required depth line reaches the alveolar ridge. Where the 2.4 mm conical drill bit is not available, it is possible to use the regular 2.0 mm drill bit instead, but it should be inserted only till the depth line below the nominal one reaches the alveolar ridge.

Drill speed 1200–(rpm) 1500Diameter Ø1.9

13 mm

500– 700

Ø2.0

500– 700

Ø2.4

P9P9S2,4

P9P9S3,0

P9P9S3,2

P9S

CAT No. H 8 mm

P 1.5 mm

P9S-2.4, 13/16 2.4 1.5 10 11.5 13 16L

(mm)P9S-3, 10-16 3 2 10 11.5 13 16

P9S-3.2, 10-16 3.2 2.4 10 11.5 13 16

D1(mm)

D(mm)

24 25

All the solutions...

25...for a perfect smile!

26 27

The healing cap is set on the implant after it has been exposed, and remains in the jaw until soft tissue (the gums) has healed.Its function is to prepare the site for placing the prosthetic device.It can also be used as a temporary prosthetic structure.Healing caps are available in 3 sizes: normal, narrow and wide.Heights: 2, 3, 4, 5 and 7 mm.Selected height is a function of the thickness of the gums.

H-3.75, 2

H-3.75, 4H-3.75, 3

H-3.75, 7H-3.75, 5

CAT No. H 1.25 mm

D1 4.7 mm

L(mm)

H-3.75, 2-7 3.75 2 3 4 5 7

D(mm)

D

D1

L

H


H TITANIuM heALING CAP

The healing cap is set on the implant after it has been exposed, and remains in the jaw until soft tissue (the gums) has healed.Its function is to prepare the site for placing the prosthetic device.It can also be used as a temporary prosthetic structure.Healing caps are available in 3 sizes: normal, narrow and wide.Heights: 3, 5 and 7 mm.Selected height is a function of the thickness of the gums.

HW-3.75, 5D

D1

L

H

Single platform (3.75 mm)

HN NArrOw TITANIuM heALING CAP

HN-3.75, 5HN-3.75, 3 HN-3.75, 7

CAT No. H 1.25 mm

D1 4.7 mm

L(mm)

HW-3.75, 5 3.75 5

HN-3.75, 3-7 3.75 3 5 7

D(mm)

wIDe TITANIuM heALING CAPHW

H HW

28 29

CAT No. H 1.25 mm

P 4.2 mm

S1-3.75, 5-16 3.75 5 7 9 12 15 L(mm)

S1-3.75, 5-16-S [Super Lock ] 3.75 5 7 9 12 15

D(mm)

A straight titanium abutment with hex. Available in two 3.75 (mm) platforms:Narrow - (3.75 mm) for implants with diameters of 3.25, 3.75 and 4.2 mm.Wide - (4.5 mm) for implants with diameters of 4.5, 5 and 6 mm.Standard model includes a short screw, but can be ordered with a long screw.Also available in Super Lock.The abutment comes in five configuragtions:Regular - standard 9 mm and also 5 mm and 7 mm.Wide – when wide space is required, primarily for back teeth.Narrow – when space is limited, for example between 2 teeth or implants usually in the anterior of the mouth.High - abutment with a basis of 3 mm above the bone.This is appropriate for thick gums or when the implant is very deep.Long - when the implant is very deep.

D

L


S1-3.75, 5

S1-3.75, 7 S1-3.75, 9

S1-3.75, 12 S1-3.75, 15

S1aScrew s/l

S1Anti-rotationAbutment

* optional element

D1

S1 ANTI-rOTATION ABuTMeNT

CAT No. H 1.25 mm

D1 4.5 mm

L(mm)

S1A-3.75, 1-3 3.75 1 2 3

S1A-3.75, 1-3-S [Super Lock ] 3.75 1 2 3

D(mm)

A straight titanium abutment with hex.Available in two platforms:Narrow - (3.75 mm) for implants with diameters of 3.25, 3.75 and 4.2 mm.Wide - (4.5 mm) for implants with diameters of 4.5, 5 and 6 mm.Standard model includes a short screw,but can be ordered with a long screw.Also available in Super Lock.The Anatomic Anti-rotation Abutmentfollows the shape of the gum line.


S1A-3.75, 1D

L

D1

9 m

m

S1A-3.75, 2 S1A-3.75, 3 S1aScrew s/l

S1AAnatomic Anti-rotationAbutment* optional element

S1AZ-3.75, 1

ANATOMIC ANTI-rOTATION ABuTMeNTS1A

2,5 mm

2,5 mm

S1 S1A

30 31

CAT No. H 1.25 mm

L(mm)

S1N-3.75, 5-9 3.75 3.75 5 7 9

S1N-3.75, 5-9-S [Super Lock ] 3.75 3.75 5 7 9

D(mm)

D1(mm)

A straight titanium abutment with hex.Available in three heights-only in the narrow platform:Narrow - (3.75 mm) for implants withdiameters of 3.25, 3.75 and 4.2 mm.To be used when space is limited, for example between 2 teeth or implants usually in the anterior of the mouth.Also available in Super Lock.


S1N-3.75, 5D

L

S1N-3.75, 9S1N-3.75, 7 S1aScrew s/l

S1NNarrow Anti-rotationAbutment

* optional element

S1N NArrOw ANTI-rOTATION ABuTMeNT

A straight titanium abutment with hex.Available in two platforms in two heights:Narrow - (3.75 mm) for implants with diameters of 3.25, 3.75 and 4.2 mm.Wide - (4.5 mm) for implants with diameters of 4.5, 5 and 6 mm.Heights - 9 and 12 mm.Standard model includes a short screw, but can be ordered with a long screw.Also available in Super Lock.The abutment comes in the following configuration:Wide - when wide space is required, primarily for back teeth.


S1W-3.75, 9

D

L

D1

CAT No. H 1.25 mm

L(mm)

S1W-3.75, 9 5.5 3.75 9

S1W-3.75, 9-S [Super Lock ] 5.5 3.75 9

S1W-3.75, 12 5.5 3.75 12

D(mm)

D1(mm)

wIDe ANTI-rOTATION ABuTMeNTS1W

S1aScrew s/l

S1WWide Anti-rotationAbutment

* optional element

2,5 mm

2,5 mm

S1N S1W

33

Pure PerfectionA new line of innovative zirco-nium abutments, developed, manufactured and distributed by SGS Dental Systems, combining supreme mechanical strength with optimal design for the ideal aesthetic result.

For dental professionals and dental implant companies.

S1AZZirCoNium AbuTmENTS

CAT No. H 1.25 mm

L(mm)

S1AZ-3.75, 15 3.75 15

S2AZ-3.75, 15 3.75 15

D(mm)

Zirconium abutments: available with or without hex.

The length of the screw is dependent on the size of the abutment.

S1AZ-3.75, 1

Single Platform (3.75 mm)

S2AZ-3.75, 15

S1aShort/Long Screw

* optional element

S1PZirconium Abutment

S1AZ ZIrCONIuM ABuTMeNTS

2,5 mm

S1AZ

34 35

Angular titanium structure. Available in narrow and wide platforms. With angles of 15° and 25°. Also available in Super Lock. Available in the following configurations: Standard angular abutment composed of a base with an angle of either 15° or 25° and a screw.Narrow angular abutment with a short internal gradient. The lower point is located on the buccal side of the gums, which is the opposite of the standard angular abutment. Long angular abutment when the implant is very deep.

Narrow platform(3.75 mm)

S2-3.75, 15

D

L

α

S2-3.75, 25 S2-3.75, 35 S2-3.75, 45

S2aScrew

S2AngularAbutment

S2L LONG ANGuLAr ABuTMeNT


S2L-3.75, 15 S2L-3.75, 25

CAT No. L α (mm)

S2-3.75, 15 3.75 9 15

S2L-3.75, 15 3.75 11 15

S2-3.75, 25 3.75 9 25

S2L-3.75, 25 3.75 11 25

S2-3.75, 35 3.75 9 35

S2-3.75, 35 3.75 11 45

D(mm)

S2 ANGuLAr ABuTMeNT

The Anatomic Angular Abutment (15°) is available in narrow platform (3.75 mm) and in two heights – 1 mm and 3 mm. The lower side is located in the buccal part.Appropriate for aesthetic solutions in buccal part.The Anatomic Angular Abutment follows the shape of the gum line.


S2A-3.75, 1

D

L1

α

S2A-3.75, 2

CAT No. L α (mm)

L1(mm)

S2A-3.75, 1 3.75 9 15 1

S2A-3.75, 1-S [Super Lock ] 3.75 9 15 1

S2A-3.75,2 3.75 9 15 2

S2A-3.75, 2-S [Super Lock ] 3.75 9 15 2

S2A-3.75, 3 3.75 9 15 3

S2A-3.75, 3-S [Super Lock ] 3.75 9 15 3

D(mm)

S2A АNATOMIC ANGuLAr ABuTMeNT

S2AZ-3.75, 3

S2 S2A

36 37

S1P PrOSTheTIC ACCeSSOrIeS Peek

PrOSTheTIC ACCeSSOrIeS

S1P Peek

CAT No.

S1PNH 3.75 11L

(mm)S1PN 3.75 11S1PWH 3.75 9

D(mm)

3 mm

7 mm

D

L

Plastic structure for casting with no internal threading.

Available with or without a hex, in switch platform.

The sleeve with the hexagon is meant to build structure on implant or to set a crown or bridge that fits on to the abutment.

The sleeve without the hexagon is designated for various tasks (root balls, various attachments). The plastic sleeve is effective when a number of prosthetic devices must be fitted in. It is easy to work with because it is made of plastic and easy to cast. Its drawback: hex inaccuracy. The plastic sleeve is made from Delrin, a material appropriate for casting as it melts when heated without leaving any residue.

Available with different screw lengths according to the height required for alignment.

Added Values:• One of the most chemically resistant polymers available

•Exhibits a superior combination of strength, stiffness and toughness

Bio-Compatible Aesthetics

•Easy to sharpen at the patient's mouth

•Low electrical conductivity

Temporary Abutment made of PEEKPEEK-CLASSIX polymer is a high performance, biocompatible thermoplastic designed for medical device applications. The Peek is an ideal substance for medical use in general and dental use in particular.

1. Straight abutment - P3S - Peek, H': 1-3 mm.2. Angular abutment - P4S - Peek 15 & 25, H':1-3 mm.

Switch platform

S1Pas

S1PNH-3.75, 11 S1PN-3.75, 11 S1PW-3.75, 9S2A-Peek, 15-1

S1A-Peek, 1

S2A-Peek, 25-1

S2A-Peek, 15-2

S1A-Peek, 2

S2A-Peek, 25-2

S2A-Peek, 15-3

S1A-Peek, 3

S2A-Peek, 25-3

D

L

L1

L2

CAT No.

S1A-Peek 3.75 0 1, 2, 3 9 2, 3, 4

S2A-Peek, 15 3.75 15 1, 2, 3 9 2, 3, 4

S2A-Peek, 25 3.75 25 1, 2, 3 9 2, 3, 4

D(mm)

L(mm)

L1(mm)

L2(mm)

38 39

A plastic casting abutment with titanium base & hex.Available in narrow and wide platforms. Also available in Super Lock.Advantage: precise location on implant which allows easy carving.

D

L


D1

S1aShort/Longscrew

* optional element

S1PTComposedHex Abutment

S1PT-3.75, 11

CAT No.H 1.25 mm

D1 4.5 mm

L 1 1.5 mm

S1PT-3.75, 11 3.75 11 L(mm)

S1PT-3.75, 11-S [Super Lock ] 3.75 11

D(mm)

COMPOSeD hex ABuTMeNTS1PT

2,5 mm

A base with hexagons at both ends. A plastic casting sleeve is attached to the upper hex.The plastic sleeve is available with or without an internal hex.Suitable for single implant restoration, or a screw retained bridge, and also to raise the height for performing various procedures: overdentures, removable dentures, bridges, bars.Advantage: close the screw at the base of the abutment to the implant only once without opening to proceed to restoration (thread bridge only).Comes in 3 heights: 1, 2 and 3 mm.This abutment has a specific driver that is meant to be used with it: The K2-S1T.

ANTI-rOTATION AeSTheTICON ABuTMeNTS1T

D

L


D1

S1T-3.75, 0.5

S1T-3.75, 2.5

S1TPH

S1T-3.75, 1.5

S1TAAbutmentScrew

S1TPHPlastic Sleeve with or without Internal Hex

S1TBase forAbutment

S1PT

CAT No. D1 4.5 mm

S1T-3.75 3.75 0.5 1.5 2.5 L(mm)

D(mm)

S1T

40 41

Snap structure connected by a click to the removable denture.The abutment is available in different heights – 1, 2, 3, 4, 5 & 6 mm – selected according to height of gums.The snap abutment is designed with a stainless steel cap and a silicon intermedian cap.Silicon cap is available in three hardness levels, 1-3 from the hardest to the softest.This snap abutment is designed for accurate joints on overdenture implants.

H

D

L

CAT No. H 1.25 mm

S3-3.75, 1-16 3.75 1 2 3 4 L(mm)

D(mm)

* optional element

S3aBall MetalCover

S3bSilicon Cap

S3c(1-6)

BallAttachmentAbutment

S3dProtective disc

(1) Hard

(2) Standard

(3) Soft

S3 BALL ATTAChMeNT


S3-3.75, 1 S3-3.75, 2

S3-3.75, 3 S3-3.75, 4 The snap abutment is designed with a stainless steel cap and a silicon intermedian cap. Silicon cap is available in three hardness levels, 1-3 from the hardest to the softest. This snap abutment is designed for accurate joints on overdenture implants.

Snap structure connected by a click to the removable denture. The abutment is available in different heights – 1, 2, 3, 4, 5 & 6 mm – selected according to height of gums.

BALL ATTAChMeNT

S3 1

2

42 43

Multi-optional angular ball attachment composed of two parts: the base and the affixing screw. This snap structure is connected by a «click» to the removable denture.The abutment is available in four different heights -1, 2, 3 and 5 mm - selected according to the height of the gums.The snap abutment is designed with a stainless steel cap and a silicon intermediate cap.The silicon cap is available in three hardness levels - 1, 2 and 3 - from the hardest to the softest.This abutment is designed for accurate connections to over denture implants.

D

20°

L

S3-3.75, 20-1

S3-3.75, 20-4

S3-3.75, 20-2

S3-3.75, 20-3


CAT No. H 1.25 mm

S3-3.75, 20-1-3, 5 3.75 1 2 3 5 L(mm)

D(mm)

* optional element

S3aBall MetalCover

S3bSilicn Cap

S3-20aScrew

S3dProtective Disk

(1) Hard

(2) Standard

(3) Soft

S3-20c(1-3.5)

Abutment

S3-20° ANGuLAr BALL ATTAChMeNT ANGuLAr BALL ATTAChMeNT

S3-20° 1

2

3

44 45

Temporary Abutment for immediate loading ontemporary bridges. The abutment is connectedby a «click» to the bridge.

Available in narrow platform.

Available in five heights - 1, 2, 3, 5 and 7 mm.


S4-3.75, 1D

D1

L

H

S4-3.75, 2 S4-3.75, 3

S4aPlastic Sleeve

S4bTemporaryAbutmentfor ImmediateLoading

CAT No.H 1.25 mm

D1 4.5 mm

L 1 1.5 mm

S4-3.75, 1-7 3.75 1 2 3 L(mm)

D(mm)

TeMPOrArY ABuTMeNTfOr IMMeDIATe LOADINGS4 TeMPOrArY ABuTMeNT fOr IMMeDIATe LOADING

S4 1

2

3

4

46 47

This unique Flat Connection Abutment fits the shallow platform of our innovative Double Platform Implants. It is suitable for use with a screw-retained denture to be fitted over multiple non-parallel implants. The bottom part, which will interface with the implant, is very flat and lightly tapered in order to facilitate denture installation even on extremely non-parallel implants.A Temporary Flat Connection Abutment (S5-3.75-T) is also available.The Extension (S5-3.75c) can function as an adaptor for the Flat Connection Abutment over a regular deep hexagonal interface implant.Compatible transfer (T1-S5) & analog (A1-3.75) are also available.

D1

L

S5-3.75P

Extension

S5aScrew

D

S5Flat ConnectionAbutment

S5-3.75c S5-3.75-T

A1-3.75 T-S5

Analog and Transfer for FlatConnection Abutment

CAT No. D1 4.5 mm

S5-3.75 3.75 3.5 L(mm)S5-3.75-T 3.75 3.5

D(mm)

S5 fLAT CONNeCTION ABuTMeNT

A new generation of implants with a dual connection platform:

reGuLAr AND fLATS5

1

3

5

7

2

4

6

Hybrid Dental Solutions

48 49

Straight adaptor for the «All on 4» method made from titanium. Facilitates installation of over denture system on non-parallel implants. The upper cone solves the lack of parallelism. The impression taking is done over the installed adaptors. The over denture system is screwed to the cone.

Available in a narrow platform (3.75 mm).

Available in 3 different heights: 1, 2 & 3 mm.


S6-3.75, 0.5D

D1

S6-3.75, 1.5 S6-3.75, 2.5

A1-S6/S7

PH-S6/S7

H-S6/S7

T-S6/S7

T1-S6/S7

P-S6/S7

S6aScrew

S6/P/TTitanium Sleeve

L

Analog and Transfer for Straight Adaptor

Healing Cap

Titanium Sleeve

Without Hex

Analog

Plastic Sleeve

Transfer

Plastic Sleeve

S6bAbutment Base

CAT No. D1 4.8 mm

S6-3.75, 1-3 3.75 0.5 1.5 2.5 L(mm)

D(mm)

S6 STrAIGhT ADAPTOr

S6tpPlastic Sleeve

4

8

1

5

9

2

6

10

3

7

STrAIGhT ADAPTOr

AS6

Without Hex With Hex

5150

1

5

9

2

6

10

3

7

11

4

8

12

B

52 53

S7 - Angular Adaptor. Angular adaptor for the «All on 4» method made from titanium.Facilitates installation of over denture system on non parallel implants. The base is installed in the implant's hexagonal hole at the appropriate orientation. The upper cone solves the residual lack of parallelism. The impression taking is done over the installed adaptors. The over denture system is screwed to the cone.Available in a narrow platform (3.75 mm). Available in 2 different angles - 17°& 30° - with 2 different height options - 1 & 3 mm - for each angle.Narrow platform

(3.75 mm)

S7-3.75, 17-1

D

L

D1

S7-3.75, 17-3

S7-3.75, 30-1 S7-3.75, 30-3

P-S6/S7

A1-S6/S7

T-S6/S7 H-S6/S7

T1-S6/S7

PH-S6/S7

S3-S6/S7

Analog and Transfer for Angular AdaptorTitanium Sleeve Plastic Sleeve

Analog

Plastic Sleeve

Ball

Healing Cap

Transfer

*optional element

S7aUpper Screw

S7bPlastic Sleeve*

Cone

Angular Adaptor

S7b/TTitanium Sleeve*

S7c

S7d+e

CAT No.D1

4.5 mm

S7-3.75, 17-1 3.75 1

L(mm)

S7-3.75, 17-3 3.75 3

S7-3.75, 30-1 3.75 1

S7-3.75, 30-3 3.75 3

D(mm)

S7 ANGuLAr ADAPTOr

S7

THE PERFECT REALIZATION

Place the adaptor in the desired orientation in the implant while holding the plastic sleeve (the adaptor is packaged attached to the sleeve). Screw the retaining screw to the implant's head and tighten it using 30 N/cm. Release the plastic sleewe by rotating it counterclockwise.

1.

1.

3.

2.

1. 1.

2.

1.

3.

2.

Stage 1:

Stage 2:

Stage 3:

1. The insertion of the adaptor in the desired position in the implant is done by means of the plastic sleeve (the adaptor comes attached to the sleeve in the package).2. Close and secure the retaining screw at 30 N/cm.3. Release the plastic sleeve by turning it counterclockwise.

1. Screw the cone to the adaptor and tighten it using 30 N/sm (the cone is packaged attached to its metal carrier). release the metal carrier retaining screw by the T2 tool.2. The release of the retaining screw of the metal sleeve from the cone is done with the aid of a driver for abutments 2-1.2. the sleeve is then removed from the mouth.

1. Attached the titanium sleeve to the cone using 20 N/cm for the temporary bridge by means of the retaining screw that attached the metal sleeve to the cone.

Without Hex Without HexWith Hex

54 55

LOCATORThe Locator system is intended for use with overdentures or partial dentures, maintained in whole or in part by endodontically treated roots in the mandible or maxilla. The Locator overdenture attachment system raises the available opportunities for removable implant prosthetics, through its low profile, dual retention, allowance for divergence and its self-aligning ability. All these attributes allow the patient to easily seat their overdenture without the need for accurate alignment of the attachment components.

ADDED VALUES: • A dual retention that eases the removal and the insertion of the denture • Very low height • Enables an angle correction of up to 20 degrees

S8 PrOSTheTIC ACCeSSOrIeS

S8

Tools T25-B

Pull out Put in

S8-3.75,0

S8-3.75,4

S8-3.75,2

S8-3.75,6

S8-3.75,1

S825-3.75,5

S8-3.75,3

S8-3.75,7

S8b/10-1Silicon Cap

PAMetal Cover

S8b/10-3Protective Disc

S8b/20-1Silicon Cap

S8b/10-2Silicon Cap

S8b/20-2Silicon Cap

S8b/10-3Silicon Cap

S8b/20-3Silicon Cap

(1)Hard

(2)Standard

(3)Soft

Angular Pack Straight Pack

We have invented the smile again...

56 57

Made of stainless steel to allow preparation of lab models. Available in narrow or wide platforms.

D

H

L

A1-P9S A1-S6/S7

CAT No. H2.5 mm

A1-3.75 3.75 10L

(mm)A1-P9S 4.5 8.5

A1-S6/S7 3.75 10

D(mm)

A1 IMPLANT ANALOG


A1-3.75

NEWA1-T3

Plastic transfer Plastic healing cap Abutment

T3

T3-3.75,9 3.75 9

CAT No.

L(mm)

D(mm)

NEWSTrAIGhT-ABuTMeNTS COMfOrT CAPS

10

9

NEWA1-T3

A1 T3

1 2 3

58 59

Made of stainless steel and available for closed tray (short) and open tray (long). Available in narrow and wideplatforms.Angular Impression Transfer:transfer with a flat platform for impression taking from non-parallel implants.D

L


T1-S5

T1-S6/S7

CAT No.

T1-3.75, 9-15 3.75 9 15

L(mm)

T1-3.75/3 3.75 10

T1-D3S 3 10

T1-S7 3 10

T1-S6/S7 3.75

D(mm)

T1aShort/LongTransfer Screw

T1bTransfer

T1 IMPreSSION TrANSfer

16 mm

* optional element

7 mm

T1-3.75, 15

T1-P9S

T1-3.75, 9

Springy impression transfer with no affixing screw. Suitable for closed tray method with higher precision. There is no need to remove nor to insert the transfer as it remains in the intermedial model throughout the process.Important: suitable for parallel teeth/implants only! (Doesn't completely replace standard transfer – T1).Efficient especially for back teeth where there is no space for wrench.D

L


T2-3.75, 9 T2-3.75, 15

T2 CLIP TrANSfer

CAT No.

T2-3.75, 9-15 3.75 9 15 L(mm)

D(mm)

T1 T2

60 61

Compact Organizer KitSK

Width: 8cm Length: 10cm Height: 5 cm

Width: 14 cm Length: 19 cm Height: 5 cm

mK Medium Organizer Kit

Width: 17.5 cm Length: 29 cm Height: 5 cm

Large Organizer KitLK

62 63

PrOfeSSIONAL IMPLANTOLOGY TOOLS

SGS Dental Systems' tools are made of surgical stainless steel and undergo thermal treatment. This process strengthens the steel and protects from wear. The tools are unique as they grip the various parts and prevent them from falling into the patient's mouth or from loss.

K1Short or Long Driver to close abutment with a ratchet/torque with square.

K1-1.2, 9 K1-1.2, 15

K2Short or Long Hand Driver to close abutment.

K2-1.2, 9 K2-1.2, 15


SGS Dental Systems' tools are made of surgical stainless steel and undergo thermal treatment. This process strengthens the steel and protects from wear. The tools are unique as they grip the various parts and prevent them from falling into the patient's mouth or from loss.

K6K5Short or Long Driver to close implant with ratchet/torque with square. Manual Adaptor for Driver.

K6-P9S long

Short or Long Driver to close implant with ratchet/torque with square. Manual Adaptor for Driver.

K5-2.4, 9 K5-2.4, 18 K5a

K7Retrieving screw – used to release perfect structure from implant.

K8-2.4Short or Long Adaptor for inserting the implant using a handpiece.

K8-2.4, 20 K8-2.4, 25

K9-1.2Our new K9-1.2 is an excepti- onally long adaptor (26mm.) which enables the doctor to affix the abutment to the implant in a controlled manner (in terms of speed and torque). K9-1.2, 21, K9-1.2, 26. The adaptor is for prosthetic accessories using a handpiece with a torque.

K9-1.2, 21 K9-1.2, 26

K6-P9 longK6-P9 small

64 65

Flexible Driver for Handpiece is intended for use when initially securing the screws via the handpiece. It allows access to hard-to-reachareas of themouth.

D8-1.2FRatchet Torque Combo

r8TDepth Gauge - Measuring tool – to indicate depth of

drilling. fl2.7 mm.

m+

8 mm

10 mm11.5 mm

13 mm

16 mm

16 mm

13 mm11.5 mm

10 mm8 mm


Handle for inserting the

implants into the anterior region.

D9Technician’s

Handle

D13Tissue Punch

Driver4 mm.

D17Parallel Pin used for placing implants in

parallel position. Used also to check

parallelism and depth of drilling.

DP

DP-17 DP-23

Ratchet Wrench - for inserting implant and tightening

abutment to implant.

r8

DrILLING BITS

Dr-1.9

Mark drill

Dr-2.0

Pilot drill (white)

Dr-2.4

Drill (yellow)

Dr-2.8

Drill (red)

Dr-3.2

Drill (blue)

Dr-3.68

Drill (green)

Dr-E

Drilling extension bit

(adds 14 mm.)

Drill (black)

Dr-4.2

Drill (brown)

Dr-5.2

66 67

Conical Drilling BitsThe drill bits are internally cooled. The diameter of each drill is color-coded as well as laser-etched on the upper portion of the drill. The depth markings are both milled and laser-etched. Intended for use with conical implants. The drilling is accurate and eliminates the need to use serial drill bits.Available in the following sizes:Each conical drilling bit fits all implant’s lengths of the same diameter.2,4 mm for the Thin Implants (P9S) with a diameter of 3/3.2 mm3,2 mm for the Conical Implants with a diameter of 3.75, 4.2, 4.5, 5 mm4 mm for the Conical Implants with a diameter of 6 mm

Caution!All conical drill bits are characterized by drilling through the bone along the entire length of the drill that is positioned inside the gums. This is as opposed to the regular drill bit, which only drills through the bone using the frontal lower tip. At the same time, its side helical blades slide along the wall of the hole without any significant radial forces.The use of conical drill bits causes extreme radial pressure, creating the necessity for gentle, probing drilling instead of constant drilling. This gradual drilling should include the use of a low torque and low rpm and intensive irrigation.Pausing periodically during the drilling allows both the blade and the bone to cool down. It also allows for the removal of bone fragments, as well as the control necessary at the appropriate rpm.

ShOrT DrILLING BITS

LONG DrILLING BITS

CONICAL DrILLING BITS

Surgical Kit Containing 30 Drill Bits

Surgical Drill Kit (DRS) containing a drill bit for every length implant in every diameter. This Drill Kit provides the doctor with a practical and convenient solution to drilling. The diameter of each drill is color-coded as well as laser etched on the upper portion of the drill. The depth marking is both milled and laser-etched.

DrC-2.2

(yellow+white)

DrS-2

Pilot drill - (white)

DrL-2

Drill - (yellow)

DrC-2.2

(yellow + white)

DrS-2.5

Drill - (yellow)

DrL-3.2

Drill - (blue)

DrC-3.2

(yellow + blue)

DrS-2.8

Drill - (red)

DrL-3.65

Drill - (green)

DrC-3.7

(yellow + green)

DrS-3.2

Drill - (blue)

DrL-4.2

Drill - (black)

DrC-4.5

(yellow + black)

DrS-3.65

Drill - (green)

DrC-5.5

(yellow + red)

(yellow+blue) (yellow+green) (yellow+black) (yellow+red)

DrC-4.5DrC-3.2 DrC-5.5DrC-3.7

11,5 mm10 mm8 mm

20 mm18 mm16 mm

Hybrid Dental Solutions Hybrid Dental Solutions

68 69

P7, P7S Protocol

The bottom part of P7S is identical to P7, thus they share the same instructions. The best conical hole for the planned conical implant is achieved by using the appointed conical drilling bit. All bits, with the exception of the final regular bit, are insertedin turn till the required depth line reaches the alveolar ridge. The final regular bit is inserted lightly to a depth of only 2mm.The drilling protocols of tapered holes for different implants are presented in Table 2.

TABLE 2

P7 P7S 3.2 3.75 4.2 4.5 5 6Preceding


Ø2Ø2.5

Ø2Ø2.5

Ø2Ø2.8

Conical bit (TDC) Ø2.4 Ø3.2 Ø3.2 Ø3.2 Ø3.2 Ø4Final regular bit – – Ø3.65 Ø3.65 Ø4.2 Ø5.2

yellow blue green green black brown

13 mm

P73.75

P7S3.75

P74.24.5

P7S4.24.5

P75

P7S5

P76

P7S6


900– 1200

Ø2.0

500– 700

Ø2.4

400– 700

Ø3.2

400– 600

Ø3.65

400– 600

Ø4.2

300– 500

Ø5.2

P73.2


13 mm

P53.75

P7S3.75

P54.24.5

P7S4.24.5

P55

P7S5

P56

P7S6


900– 1200

Ø2.0

500– 700

Ø2.8

400– 700

Ø3.2

400– 600

Ø3.65

400– 600

Ø4.2

300– 500

Ø5.2

P73.2

The drilling sequence for optimal implant position in bone:TABLE 3


red blue green green black brown

70

1 Implant

10 Implants

How to open the vial

Color of Cap

Implant Diameter 2.5 3.25 3.75 4.2 4.5 5 6Final Drill Bit 2.1 2.8 3.2 3.65 3.65 4.2 5.2

красный синий зеленый зеленый черный коричневыйжелтый

hybrid dental solutions - golden...

Documents