Product Catalogue

2

Durability.The Husqvarna three-piece crankshaft consists of two forged halves connected withthe crankpin. This design provides extremelydurability and long service life. Ourcrankcases made in magne sium combineboth strength and low weight. Clutch coversare also made in magne sium for the same reasons. The LowVib system has steel springsto keep their original quality.

Effi ciency.Over the years our engines have becomemore and more easy to start. And the powerto weight ratio has increased, providing higher cutting c her capacity. The X-TORQ®higher cutting c her capacity. The X-TORQ®higher cutting c her capacity. The X-TORQengine has high power output under load and lower rpms. In short, more effi cient power.

Ergonomics.The Husqvarna LowVib-system is based onthe two mass principle, where the mass of theentire handlebar system acts as a counter-weight to absorb vibrations. The angled fronthandle, the distance between the handles andthe slim saw body plus low weight, high centreof gravity make our saws easy and less tiringto work with.

3

Note: Features shown are available on applicable models.

With our great knowledge and long experience with chainsaws, wecertainly don’t start totally empty handed. But we start open-mindedand begin with you and your working situation. And one of the mostimportant questions we ask ourselves every time the construction of anew chainsaw starts is how we can treat you, the user with the greatestrespect. The result is a range of chainsaws that you can depend upon toget the job done smoothly and with great precision.And the knowledge that the unique Husqvarna safety features areworking for you every time you go to work. So a Husqvarna is not justany saw. It’s a saw built with respect for you, to be put in you hands.

Environmental care.For many years we’ve been developing fueleffi cient engines with signifi fi cantly lower emissions, named E-TECH® engines. With the X-TORQ®With the X-TORQ®With the X-TORQ engine technology, we are reducing fuel consumption with up to 20% and emissions with up to 60%. We also have developed a biodegradable vegetable based chain oil.

Performance.AutoTune™ gives optimal engine perform-ances throughout automatic engine adjust-ment. It compensates for different fuels, altitude, humidity, temperature and colgged air fi lter. Air Injection™ removes larger dust and debris particles before reaching the air fi lter to improve engine life.

There is one reason for everydetail on our chainsaws. You.

4

Husqvarna 372 XP®Husqvarna 576 XP® Husqvarna 390 XP®

TECHNICAL SPECIFICATIONS 390 XP® 576 XP® 372 XP®

Displacement, cc 87.9 73.5 70.7

Power, kW / hp 4.8 / 6.5 4.2 / 5.7 3.9 / 5.3

Weight excl. bar and chain, kg 7.1 6.6 6.1

Rec. bar length, cm / inches 45 – 70 / 18 – 28 38 – 70 / 15 – 28 38 – 70 / 15 – 28

AutoTune™ ― ― ―

X-Torq ― ―

TrioBrake™ ― ― ―

Air Injection™

Low Vib

E-Tech ― ― ―

Heated handles / carburettor ― / ― ― / ― ― / ―

Price

= Available = Optional ― = Not available

Our most advanced chainsaws for those users who require top end performance. Developed and tested in collaboration with the most demanding professional users. Our XP ® chainsaws are built with exacting demands in terms of professional performance, comfort and ergonomics. High-power, low weight, slim body and high centre of gravity make them both powerful and easy to

manoeuvre. They are fully loaded with features such as Air Injection™, Smart Start and Low Vib. AutoTune™ automatically controls flow of fuel to engine to optimise performance. Fuel consumption and emissions are reduced thanks to the unique X-Torq engine technology. The result is better productivity and a job well done.

Husqvarna XP chainsaws. Professional. Powerful. Precise.

5

Husqvarna 570 Husqvarna 365

Husqvarna 435

TECHNICAL SPECIFICATIONS 570 365

Displacement, cc 67.9 65.1

Power, kW / hp 3.6 / 4.9 3.4 / 4.6

Weight excl. bar and chain, kg 6.7 6.0

Rec. bar length, cm / inches 38 – 70 7 15 – 28 38 – 70 / 15 – 28

X-Torq ―

TrioBrake™ ― ―

Air Injection™

Low Vib

E-Tech ― ―

Heated handles / carburettor ― / ― ― / ―

Price

= Available = Optional ― = Not available

TECHNICAL SPECIFICATIONS 445 435

Displacement, cc 45.7 40.9

Power, kW / hp 2.1 / 2.8 1.6 / 2.2

Weight excl. bar and chain, kg 4.9 4.2

Rec. bar length, cm / inches 33 – 5013 – 20

33 – 4513 – 18

X-Torq

TrioBrake™ ― ―

Air Injection™

Low Vib

Price

= Available = Optional ― = Not available

These all-round chainsaws are ideal for landowners, small holders and others who cut less regularly, since occasional users also demand optimal performance, easy starting, comfortable handling and superb safety. The X-Torq engines deliver maximum power and torque over a wider rpm range while reducing emissions and fuel consumption.The e-series models are especially easy to handle thanks to features such as the spring-assisted starter and tool-less chain tensioning.The 455 is an ideal saw for landowners and part-time users who require a high powered, heavy-duty and responsive workmate for all cutting conditions. It combines technology and ergonomics.

Power to cut through the toughest of jobs.

Chainsaws with the strength you need, whenever you need it.

Our range of powerful, robust, larger chainsaws is designed for the most demanding of users where the environment is hard and conditions tough. They have been developed in close cooperation with professional users. Their low weight and high power is combined with a rugged engine, makes these saws exceptionally versatile and well suited for a wide variety of applications. Delivering more power and extra durability, they are built for increased productivity without adding to the users work burden.

Husqvarna 445

6

Reach greater profi tability withour professional pole saws.Husqvarna 327P5xReach, balance and performance for professional tree care achieved through smart technological solutions, outstanding ergonomics andhigh durability. The Husqvarna 327P5X also feature a detachable shaft that facilitates easy transport and storage.24.5 cm³ – 0.9 kW – 1.2 hp – E-TECH II, Shaft length 275 cm – Empty weight excl. cutting equipment 6.4 kg, Chain pitch 3/8” – Rec. bar length 12”

A perfect hedge without the stretch.Husqvarna 325HE4xThese commercial-grade hedge trimmers are powered by E-TECHengines that combine low emissions with high power-to-weightratios. Their fi fi ne balance and ergonomics make them ideal for long shifts. Both have Smart Start and fuel pump for easier starting. The cutting bar on the 325HE4X can be folded back against the tube, for handy storage and transport.24.5 cm³ – 0.9 kW – 1.2 hp – E-TECH, Bar length 55 cm – Totallength 243.5 cm – Weight excl. accessories 5.8 kg

Husqvarna 325HD60xHusqvarna’s wide range of double-sided hedge trimmers offerseffi cient and comfortable operation, with features such as SmartStart for easier starts, and LowVib vibration damping on mostmodels. Some models also feature E-TECH, which reduces emissionswhile increasing the power-to-weight ratio. The 327HDA65X isequipped with a cutting bar that can be angled.24.5 cm³ – 0.7 kW – 1.0 hp, E-TECH – Bar length 60 cm – Weightexcl. accessories 5.6 kg

SPECIFICATION 325HE4x 325HD60xDisplacement, cm3 24.5 24.5

Power kW/hp 0.9/1.2 0.7/1.0

Bar length, cm 55 60

Weight, kg 5.8 5.6

SPECIFICATION 327P5xDisplacement, cm3 25.4

Power kW/hp 0.9/1.2

Shaft length 275

Bar length 12“

Weight, kg 6.4

Chain pitch, inches 8/3

7

SPECIFICATIONS 350BTDisplacement, cm3 50.2

Power, kW / hp 1.6 / 2.1

Weight, kg 10.2

Air speed, m /s 80.5

Air fl ow, fan housing, m³ / min 19.6

Air fl ow, tube, m³ / min 14

X-Torq = Available ― = Not available

Backpack blowers with professional capacity and ergonomics.Incorporating Husqvarna’s expertise in the design of powerful machines, these backpack blowers offer the user total control. Comfortable to use, these top blowing machines feature adjustable handle with throttle lock control, outstanding ergonomics and comfortable harnesses. All blowers in this range use low emission engines. The 356BTx is also equipped with Husqvarna’s low noise engine specially designed for use in urban areas or where there are noise level restrictions.

Lighten your load when trimming, brushcutting and clearing.brushcutting and clearing.

Husqvarna 236RHusqvarna 236R is a highly durable brushcutter developed for tough work. The engines heavy duty & easy service clutch system together with the effi cient airfi lter leads to long product life. Delivered together with both trimmer head (T35) and grass knife (Multi 275-4) and standard double harness.33.6 cm³, 1.2 kW/1.6 hp, E-TECH, weight excl. accessories 7.5 kg

Husqvarna 143R-IIHusqvarna 143R-II is a rugged brushcutter designed for tough use. The handle bar has an assymetrical design which leads to better working position. Delivered with double harness.41.5 cm³, 1.5 kW/2.0 hp, E-TECH, weight excl. accessories 7.6 kg

Husqvarna 327LDxThe Husqvarna 327LDx is a lightweight, high performance trimmer. The machine is equipped with Husqvarna’s E-TECH® II engine with catalytic emission control, soft and comfortable handles. The 327LDx is a combination machine, developed for many different types of job. Equipped with spray guard and T35 trimmerhead. Several attachments are available as accessories.24.5 cm³ , 0,9 kW/1,2 hp, E-TECH II, weight excl. accessories 5,1 kg³ , 0,9 kW/1,2 hp, E-TECH II, weight excl. accessories 5,1 kg³

SPECIFICATION 143R-II 236R 327LDxDisplacement, cm3 41.5 33.6 24.5

Power kW/hp 1.5/2.0 1.2/1.6 0.9/1.2

Weight, kg 7.6 7.5 5.1

8

Love your lawn your way. We provide the tools.

Husqvarna LT151Efficient garden tractor with side ejection, smart design and ergo-nomics. Powerful Kohler engine with full pressure lubrication. A comfortable and reliable tractor with manual transmission. Can be complimented with a collector and BioClip® plate.Kohler Courage OHV, 15 hp*, manual, cutting width 97 cm

Our tractors combine work with pleasure.

Husqvarna 54Model 54 is a very rugged, traditional cylinder mower that is perfect for smaller lawns. Easy handling, durability and unbeatable cutting results set our manual mowers apart from the rest.40 cm, 8,6 kg

Husqvarna R 153SVRugged, self-propelled mower with a high-performance, easy-start engine from Briggs & Stratton. Equipped with a wide, cast alumini-um cutting deck, ideal for larger areas. Further features include TrioClip, central cutting height adjustment and robust ball-bearing wheels. Also features variable drive speed for maximum driving comfort and cutting effi ciency.B&S series 750, TrioClip, 53 cm

* HP as rated by the engine manufacturer

Husqvarna CT151Garden tractor with integrated central-rear collection and easy emptyingof the grassbox. Kohler Courage OHV SV470, 15 hp*, 97 cm cutting width, 38-102 mm cuttingheight

9

A

B

C

Using different chains.Husqvarna offers a wide range of chains for different needs. Find more information and chains on our website.

1 / 4" Pitch chains, recommended up to 38 cc.Extremely lightweight chain for smooth clean cuts. Have Micro Chisel cutters.

Mini 3 / 8" Pitch chains, recommended up to 45 cc.Low-vibration chain with Chamfer Chisel cutters. For woodcutters who use smaller-size saws in high -production environment. Also available in low kickback version.

Pixel .325" Pitch chains, recommended for 35 – 55 cc.Chain developed to meet the specific needs of today’s lightweight chainsaws. Cuts narrow kerf witch requires less power from the saws than standard cutting systems. Low kickback and low-vibration features with Micro Chisel cutters. Not recommended for heavy duty work e.g storm damages forest.

.325" Pitch chains, recommended for 35 – 60 cc.High-performance, low-vibration chain with Micro Chisel cutters. Ideal for demanding conditions.

3 / 8" Pitch chains, recommended for 50 – 100 cc.Professional chains available in Semi-Chisel and Chisel cutters . Chisel cutters for high-production cutting of clean wood. Semi-Chisel cutters for fast cutting and easy sharpening. The Chisel cutter is available in low-vibration version, and also as a square ground for professional use.

.404" Pitch chains, recommended for 85 cc and larger.A big-timber chain designed for the professional users available in three variants: Chisel cutters, ideal for users who need high production and cut clean wood with larger-size chain saws. Micro Chisel cutters for fast cutting end easy sharpening. Fully rounded Chipper variant for exelent performance, easy sharpening and edge-holding durability.

A. Laminated bars with sprocket nose.The gentle curve and small nose radius of the laminated bars with nose wheel reduce the risk of kickback and facilitate good cutting control. The bars are coated to protect against scratches and corrosion. Available in 3/8" Mini, .325", and 3/8" Pitch in length 10 – 20".

B. Solid bars with replaceable bar nose.Recommended for use with long bars to reduce load on the bar tip. The load is transfered to the high quality roller bearing. Frictional loss is reduced by 8–10 % depending on the bar length compared with solid bars with hard nose. The bars are coated to protect against scratches and corrosion. Replaceable tip is available as a spare part. Available with 3/8" chain pitch in lengths 18 – 28".

C. Solid bars with hard nose.Solid bars are used for hard species of timber, thick bark and in very sandy, dusty or sooty conditions. The bars are coated to protect against scratches and corrosion. Available in lengths 24 – 42".

Bars and chains for a safer, more efficient cut.Genuine Husqvarna equipment and chainsaw accessories are built to the same high standards as our saws themselves. By combining high-quality materials and basing development on the demands of forestry professionals, we are able to offer a wide range of guide bars, chains and files that delivers maximum efficiency and safety when added to any chainsaw.

Also available: Replaceable nose sprockets for your bars and replaceable sprocket nose bearing and rivets for all our laminated bars.

Champfer Chisel chain.

Micro Chisel chain.

Chipper chain. Semi-Chisel chain.

Chisel chain.

Gauge. Pitch.

Special chains.Chains with special factory grind for making dimensional boards and planks from larger timbers by cutting parallell to the wood grain.

Bar and chain kit.Kit containing one bar with small bar mount and two chains. 13" .325, Art.Nr. 531 00 38-13. 15" .325, Art.Nr. 531 00 38-17. 13" Pixel, Art.Nr. 531 00 38-93. 15" Pixel, Art.Nr. 531 00 38-92.

10

Small bar mounting point Large bar mounting point

T42

5

327P

4 / 3

27P

5X

T43

5 / 3

34T

338

XP

T

317

Ele

ctri

c / 3

21 E

lect

ric

240

e-se

ries

235

e-se

ries

339

XP

435

e-se

ries

/ 435

/ 440

e-s

erie

s

450

e-se

ries

/ 445

/ 445

e-s

erie

s

353

/ 346

XP

55 / 4

55 R

anch

er / 4

55 e

-ser

ies

Ran

cher

460

Ran

cher

/ 357

XP

/ 359

365

/ 372

XP

570

/ 576

XP

385

XP

390

XP

* / 3

95 X

P

3120

XP

Bar length inches /cm

Chain pitch inches

Gauge inches /cm

Product number

Drive links Type Product number

LAMINATED BAR WITH NOSE WHEEL

10 / 25 3 / 8 .050 / 1,3 505 89 16-40 40 H36 LowVib 501 84 21-40

12 / 30 3 / 8 .043 / 1,1 501 95 95-45 45 90SG 501 84 23-45

12 / 30 3 / 8 .050 / 1,3 501 95 92-45 45 H36 LowVib 501 84 21-45

14 / 36 3 / 8 .050 / 1,3 501 95 92-52 52 H36 LowVib 501 84 21-52

16 / 40 3 / 8 .050 / 1,3 501 95 92-56 56 H36 LowVib 501 84 21-56

13 / 33 .325 .050 / 1,3 508 92 61-56 56 H30 LowVib 501 84 06-56

15 / 38 .325 .050 / 1,3 508 92 61-64 64 H30 LowVib 501 84 06-64

16 / 40 .325 .050 / 1,3 508 92 61-66 66 H30 LowVib 501 84 06-66

18 / 45 .325 .050 / 1,3 508 92 61-72 72 H30 LowVib 501 84 06-72

20 / 50 .325 .050 / 1,3 508 92 61-80 80 H30 LowVib 501 84 06-80

13 / 33 .325 .058 / 1,5 508 91 21-56 56 H25 LowVib 501 84 04-56

15 / 38 .325 .058 / 1,5 508 91 21-64 64 H25 LowVib 501 84 04-64

16 / 40 .325 .058 / 1,5 508 91 21-66 66 H25 LowVib 501 84 04-66

18 / 45 .325 .058 / 1,5 508 91 21-72 72 H25 LowVib 501 84 04-72

20 / 50 .325 .058 / 1,5 508 91 21-80 80 H25 LowVib 501 84 04-80

15 / 38 3 / 8 .058 / 1,5 508 91 41-56 56 H42 LowVib 501 84 14-56

16 / 40 3 / 8 .058 / 1,5 508 91 41-60 60 H42 LowVib 501 84 14-60

18 / 45 3 / 8 .058 / 1,5 508 91 41-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1,5 510 15 35-72 72 H42 LowVib 501 84 14-72

15 / 38 3 / 8 .058 / 1,5 508 91 31-56 56 H42 LowVib 501 84 14-56

16 / 40 3 / 8 .058 / 1,5 508 91 31-60 60 H42 LowVib 501 84 14-60

18 / 45 3 / 8 .058 / 1,5 508 91 31-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1,5 544 28 55-72 72 H42 LowVib 501 84 14-72

SOLID BAR WITH REPLACEABLE TIP

18 / 45 3 / 8 .058 / 1,5 501 95 77-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1,5 501 95 77-72 72 H42 LowVib 501 84 14-72

18 / 45 3 / 8 .058 / 1,5 501 95 69-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1,5 501 95 69-72 72 H42 LowVib 501 84 14-72

24 / 60 3 / 8 .058 / 1,5 501 95 69-84 84 H42 LowVib 501 84 14-84

28 / 72 3 / 8 .058 / 1,5 501 95 69-92 92 H42 LowVib 501 84 14-92

SOLID BAR

10 / 25 1 / 4 .050 / 1,3 505 89 15-60 60 H00 501 84 40-60

18 / 45 3 / 8 .058 / 1,5 501 95 80-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1,5 501 95 80-72 72 H42 LowVib 501 84 14-72

24 / 60 3 / 8 .058 / 1,5 501 95 80-84 84 H42 LowVib 501 84 14-84

28 / 72 3 / 8 .058 / 1,5 501 95 80-92 92 H42 LowVib 501 84 14-92

24 / 60 .404 .063 / 1,6 507 47 60-46 76 H64 501 84 31-76

28 / 72 .404 .063 / 1,6 501 58 96-01 84 H64 501 84 31-84

30 / 75 .404 .063 / 1,6 501 95 81-92 92 H64 501 84 31-92

36 / 90 .404 .063 / 1,6 501 95 81-04 104 H64 501 84 31-04

42 / 105 .404 .063 / 1,6 501 92 18-24 124 H64 501 84 31-24

* Solid bar with .404 chain pitch on 390 XP is optional on certain markets.

11

Combi can.Developed in-house, our Combi can holds 6 litres of petrol and 2.5 litres of oil. The fuel container is fitted with an efficient overfill protection. When the tank is full, the flow is shut off automatically and you can lift up the can without spilling. The fuel container can be separated from the oil container and is also sold separately. Between the cans there is a space for files and other tools. Approved in accordance with UN recommendations. Art.Nr. 505 69 80-00

When the tank is full, the flow is automatically shut off and you can lift the can up without spillage.

Husqvarna Two-stroke oil, HP.Fulfils the requirements of JASO FB/ISO EGB and Rotax 253 snowmobile test. 0.1 litres, Art.Nr. 544 01 58-05. 1 litre (standard bottle), Art.Nr. 544 01 58-08. 1 litre (dosage bottle), Art.Nr. 544 01 58-09. 4 litres, Art.Nr. 544 01 58-10. 10 litres, Art.Nr. 544 01 58-11.

Husqvarna oils have been proven to leave less deposits on the pistons. Reducing damage at high temperatures.

Regular 2-stroke oils leave depositis on the pistons causing damage at high temperatures.

Husqvarna oils optimised for superior performance.You can always trust in Husqvarna providing oils suitable for your working conditions and that they are optimised according to the development of our engines. Husqvarna’s approach is to use the perfect blend of synthetic and highly refined mineral oils. Together with specially developed additives it will give you perfect lubrication, seizure protection and a cleaner engine.

Husqvarna Two-stroke oil, HP. Husqvarna HP oil is developed to work well with low quality petrol. Carefully selected components with special additive gives a cleaner engine and less coating on the piston and cylinder walls, exhaust system and crankcase.

Engine Oil Comparison.Tests made with Husqvarna chainsaws show the differences between a reference oil and Husqvarna 2-stroke oils. Cylinder and piston comparison run under the same circumstances but with different engine oil. The cylinders were run on the same engine block. The test was done with a Husqvarna 346XP under very heavy load in a specially developed laboratory method. The Husqvarna oils gives better protection against lean and carbon related piston seizures.

12

FILING EQUIPMENT PRODUCT NUMBER

FILING EQUIPMENT PRODUCT NUMBER

Intensive Cut 4.0 mm, 2 pcs 510 09 57-01 File gauge, .325" H25 505 69 81-10

Intensive Cut 4.8 mm, 2 pcs 510 09 55-01 File gauge, 3 / 8" MINI 505 24 37-01

Intensive Cut 4.8 mm, 12 pcs 510 09 55-02 File gauge, .404" H64 505 69 81-15

Intensive Cut 5.5 mm, 2 pcs5.5 mm, 2 pcs5.5 mm, 510 09 56-01 Depth gauge, .325" 505 69 81-00

Intensive Cut 5.5 mm, 12 pcs 510 09 56-02 Depth gauge, 3 / 8" 505 69 81-01

Round fi les, Ø 4.0 mm, 2 pcs 544 03 69-40 Depth gauge, .404" 505 69 81-02

Round fi les, Ø 4.0 mm, 12 pcs 505 69 81-41 Depth gauge, 3 / 8" MINI 505 69 81-03

Round fi les, Ø 4.5 mm, 2 pcs 544 03 69-45 Combination gauge, .325" / 1.3" PIXEL H30 505 69 81-08

Round fi les, Ø 4.8 mm, 2 pcs 544 03 69-48 Combination gauge, .325" / 1.5" H25 505 69 81-09

Round fi les, Ø 4.8 mm, 12 pcs 505 69 81-49 Combination gauge, 3 / 8" H42 505 24 35-01

Round fi les, Ø 5.2 mm, 12 pcs 505 69 81-52 Stump vise 505 66 52-56

Round fi les, Ø 5.5 mm, 2 pcs 544 03 69-55 File handle, Ø 4.5 – 5.5 mm 505 69 78-01

Round fi les, Ø 5.5 mm, 12 pcs 505 69 81-56 File handle, fl at fi les 505 69 78-10

Flat fi les, 6", 1 pcs 505 69 81-60 File kit .325" 505 69 81-25

Flat fi les, 6", 12 pcs 505 69 81-61 File kit .325" PIXEL 505 69 81-27

Flat fi les, 8", 1 pcs 505 69 81-80 File kit 3 / 8" 505 69 81-30

Flat fi les, 8", 12 pcs 505 69 81-81 File kit 3 / 8" MINI 505 69 81-38

File kit .404" 505 69 81-92

A sharp chain is just as important as a powerful engine.For your chainsaw to operate effectively, safely and with precision it is vital to have a sharp chain. How often it needs to be sharpened depends of course on how frequently you use it. A good indication of the condition of your chain is the appearance of the wood chips. A sharp chain will produce fine even wood chips while a dull chain generates sawdust.

Filing equipment.You’ll need a round file, a flat file and a filing gauge to file a chain. Husqvarna has developed a unique combination gauge that includes a file gauge and a depth gauge setter in the same tool. Used together with the round file and flat files it ensures the correct filing angle. We also recommend that you use a vise to hold the bar, leaving both hands free for filing. File kits are available.

2. File the depth gauges.Place the depth gauge tool on the chain and use the flat file to file the depth gauge all the way down. If you file the depth gauge without a tool you risk filing them too far down. The chain will then produce too thick chips. This will increase vibration, poor precision and could increase the risk of kickback.

1. File the cutting teeth.Place the file gauge on the chain. You’ll see arrows which should be pointing in the same direction as the chain rotates. File using light and even pressure with gentle, pushing strokes parallel to the gauge.File down to get a fresh cutter edge. Try to get the same length of all cutters. File every other tooth from the right and every other tooth from the left. A good method is to file from one direction then turn the saw and continue working in the other direction.

13

100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

1

2

3

4

5

6

7

8

9

A B

C

D

F

E

G

Husqvarna Intensive Cut.New upgraded design with 20 % better cutting performance and longer lifetime. To keep your chain in trim you will need a round file and a file gauge to sharpen the cutters. With a correct sharpened chain your work will be easier and safer.

We compare the number of strokes and the amount of material removed from the cutter with each stroke. By doing this we are able to ascertain that Husqvarna files remove more material with fewer strokes when compared to its main competitor.

A. Husqvarna round and fl at fi les.Quality files which give you the right geometry of the cutter.

B. File handle.Patented file locking system. Fits all our files. 25° and 30° guides ensures correct file angling.

C. File gauges.Specially designed file gauges that give the correct filing angles, use together with our round files.

D. Depth gauge tool.Specially designed depth gauges that give the correct filing angles, use together with our flat files.

E. Combination gauges.Our combination gauges are specially designed with a file gauge and depth gauge setter to put together in one tool. Use together with our round and flat files for a correct filing angle.

F. Stump vise.To fasten the chainsaw in a secure position when filing. Made of forged steel.

G. Chainsaw maintenance kits.The chainsaw maintenance kits includes fuel filter, sparkplug and airfilter. Husqvarna 340/340e /345/345e /350 and 346 XP/353, Art.Nr. 510 27 62-01.Husqvarna 346 XP/353, Art.Nr. 510 27 63-01.

New!COMPARISION ROUND FILES

Acc

umul

ated

wei

ght

redu

ctio

n on

cut

ter

( g )

Number of strokes

Main competitorHusqvarna Intensive Cut

14

Helmet.A somewhat simpler but effective helmet with six point plastic interior. Can be adjusted vertically, complete with visor and hearing protectors. Approved for temperatures to –20°C/-4F. The helmet has been tested and meets the requirements in EN 397. Hearing protectors have been tested and meets the requirements in EN 352-3. The visor has been tested and meets the requirements in EN 1731.

Art.Nr. 505 66 56-00

Leather boots with saw protection. Leather boot with good stability and fi t. Made of polyurethane treatedleather. Seams of heavy-duty Kevlar thread for signifi cantly increased strength. Durable and waterproof polyurethane sole. Hooks for stron-ger and easier adjustments. Inner sole of shock-absorbent Ergothan prevents stress injuries. This boot has a steel toe cap and meets require-ments of EN 345-2, S2, EN 381-3 class 1, 20 m/s.Art.Nr. 544 67 39-43

Choose the right protection gear for your chainsaw job.

Jacket.Top of high wiz orange for better visibility. Extended back. Full long zipper at front, two front pockets with zipper.Material: 75% polyester 25 % cotton, Öko Tex approved material.Size: S, M, L, XL and XXLArt.Nr. 510 22 10-xx

Gloves Garden Pro. This glove is perfect for the professional landscaper. Short model for better comfort. Made in water repellent kid leather.Art.Nr. 505 65 01-06

Comfort Gloves. Shaped and reinforced palm. Exposed areas are seamless and reinforced with leather. Water proof kid leather palm and hardwearing, water-repellent polyester back.Art.Nr. 505 64 20-19

15

Waist trouserKnee area and front of leg in high wiz orange for better visibility, two pockets at front and one at back with zipper , two zippers at back of leg for possibility to open for better venti-lation, elastic waist, buttons for suspenders, pocket for ruler on right leg.Material: 75 % Polyester 25 % cotton, Öko Tex approved material.Size: 44 – 64Approval: Approved according to EN 381-5, class 1, 20 m/s, Euro test.Style A protective material.Art.Nr. 510 22 12-xx

Carpenter trouserHigh front and rear part, front with a big pocket with zipper, wide adjustable suspen-ders with elastic band at the rear. Knee area and front of leg in high wiz orange for better visibility. Two pockets at front and one at back with zipper, two zippers at back of leg for possibility to open for better ventilation. Elastic waist, buttons for suspenders, pocket for ruler on right leg. Material: 75 % Polyester 25 % cotton, Öko Tex approved material. Size: 44 – 64 Approval: Approved according to EN 381-5, class 1, 20 m/s, Euro test. Style A protective material.Art.Nr. 510 22 15-xx

Chaps. One size, easy to adjust to height and waist size. Perfect for the occasional chain saw user. Made of 100% polyester. Elastic ankle tie.Art.Nr. 505 63 26-09

Drawing on more than 300 years of engineering asolutions for the care of forest, parks and gardens. With an optimal combination of professional performance and user focus, Husqvarna products give you effi ciency, satisfaction and quality results.

XX

-00

Vision Joint Stock Company, No. A5B Giang Vo, Ba Dinh Dist, Hanoi, Vietnam Tel: +84 4 38462833, Fax: +84 4 38462420, E-mail: huong.vision@netnam.vn

www.husqvarna.com/vn

Copyright © 2010 Husqvarna. All rights reserved. Husqvarna and other product and feature marks are trademarks of Husqvarna AB (publ).