hubbell system one -cajas de piso nuevas de hubbell
TRANSCRIPT
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
1/32
from the Leader in Delivery Systems
Wiring Systems
®
HUBBELL
SystemOne
Recessed
Floor Boxes
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
2/32
2 www.hubbell-wiring.com
Wiring Systems
®
Hubbell Delivery Systems are a family of products that work
together to provide commercial buildings with access to power,
data, and AV. From oor boxes to ceiling enclosures – and
everything in between – Hubbell can deliver power, data, and
AV to wherever it’s needed. The Delivery Systems line keeps
schools, hotels, hospitals, retail facilities, and ofce buildingsall reliably, conveniently, and safely connected. No matter the
project, Hubbell Delivery Systems has a exible, easy-to-access,
aesthetically pleasing solution.
What Are Delivery Systems?
SystemOne – part of Hubbell’s Delivery Systems line – was born from a desire to
create a common look for re-rated poke-throughs and oor boxes. This innovative
system allows you to create custom solutions for multi-service applications that require
both ush in-oor boxes and re-rated poke-throughs.
Regardless of capacity or installation, this simple concept allows engineers, architects,
and contractors to select just one product line that will provide a uniform look throughout
an entire building – whether the power, data, and AV are being delivered in the oor or
through the oor.
Hubbell’s rst SystemOne devices included a 4-inch ush re-rated poke-through and oor
boxes that shared a common cover assembly. With the introduction of 4, 6 and 8-inch recessed
re-rated poke-throughs, commercial buildings were provided with even more capacity options
without having to sacrice matching high-end nishes.
The most recent addition to SystemOne is a full line of recessed oor boxes for concrete and raised
access oor applications. These recessed oor boxes guarantee a similar look for all capacities and
installations. They offer a traditional rectangular cover and installation, as well as the option to use
high-end round covers to match the recessed poke-through line.
Hubbell SystemOne -One Look for Any Capacity
Hubbell Delivers
2
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
3/32
Wiring Systems
www.hubbell-wiring.com 3
1 Screw 3 FastenersPre-wired duplex or Style Line® receptacles
with 8 in. stranded leads are installed into
plates to allow for even more labor savings.Easy Mount Device Plates The Easy Mount device plates allow for a device to be
mounted to the plate and wired outside of the oor box.
The device and plate assembly are then easily installed
and secured with one stud that locates the plate and
one screw to secure it.
This patent pending device fastening method maximizes
efciency while reducing install time and comes standard
with all device plates for 2, 4 and 6-Gang boxes.
The Family LookHubbell SystemOne Recessed Floor Box line
offers a common look regardless of capacity
or installation. This simple concept ensuresa consistent look throughout a building with
rectangular or round covers. Round covers lend
themselves to multi-story buildings, also using
Fire-Rated Poke-Through devices.
Covers All SystemOne covers are ADA compliant.
The doors open to 180° for maximum
access. Cables and plugs are protected by
recessed connections.
Hubbell SystemOne Recessed Floor Boxes
1
1
2
3
3
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
4/32
4 www.hubbell-wiring.com
Wiring Systems
®
Hubbell SystemOne Recessed Floor Boxes
Selecting a Concrete Floor BoxTable of Contents
To assist with the oor box selection process, please have the following information available:
Electrical requirements: Application: Cover style:
Power (each electrical device requires one gang)
Data/AV (consult manufacturers’ specication
for size/volume requirements), number required.
Add up total number to determine needed
capacity. If necessary capacity is not shown
round up to next size. Example: 9-Gang rounds
up to a 10-Gang oor box
On-grade (OG)
Above-grade (AG)
Minimum concretepour depth
Round
Rectangular
Once this information is gathered start on the capacity column:
1 Capacity: Select necessary box.
2 Application: Select the concrete pour depth and on-grade or above-grade application.
3 Cover style: Select round or rectangular cover.
4 Locate interconnecting point of all three categories and move to right to select
correct catalog number.
Application - Minimum Pour Depth 2
2 ½ in. 3 in. 3 ¼ in. 3 ¾ in. 5 ½ in. 6 ¼ in.
AG OG AG OG AG OG AG OG AG OG AG OG
E l e c t r i c a l R e q u i r e m e n t s - C a p a c i t y 1
2-Gang
• CFB2G25
S e l e c t C o r r e c t C a t a l o g N u m b e r 4
• CFB2G25CR
• CFB2G30
• CFB2G30CR
• CFB2G25R
• CFB2G25RCR
• CFB2G30R
• CFB2G30RCR
4-Gang
• CFB4G25
• CFB4G25CR
• CFB4G30
• CFB4G30CR
• CFB4G25R
• CFB4G25RCR
• CFB4G30R
• CFB4G30RCR
• CFB4G30CI
• CFB4G30RCI
6-Gang
• CFB6G30
• CFB6G30CR
• CFB6G30R
• CFB6G30RCR
10-Gang
• CFB10G55
• CFB10G55CR
• CFB10G55R
• CFB10G55RCR
Rectangular Rectangular Round Round Rectangular Round
Cover Style 3
Floor Boxes for
Concrete Floors
Features .........................4-5
2-Gang .......................... 6-9
4-Gang .......................... 10-136-Gang .......................... 14-17
10-Gang ........................ 18-21
Floor Boxes for
Raised Access and
Wood Floors
Features .........................22-23
2-Gang .......................... 24-25
4-Gang .......................... 26-27
4-Gang Round ............... 28-29
10-Gang ........................ 30-31
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
5/32
Wiring Systems
www.hubbell-wiring.com 5
oncrete Applications
Safety
• Flush flange available for tile, finished concrete or Terrazzo
• Surface flange available for carpeted floors with 0.15 in. rise
meets ADA requirements
• Hideaway egress doors fold under cover while in use
• 180° opening of main doorFunctionality
• Cables and connections are protected by recessed functionality
• Open architecture sub-plate design
• Common door layout regardless of flange for harmonized look
• Meets UL 514A scrub water requirements with
ScrubShield® technology
• Easy selection with common look for all floor types
Value
• Enhance building décor with numerous finishes
• Increase durability and longevity with cast aluminum covers
Online Resources
• BIM models, customer drawings and technical specifications are available on www.hubbell-wiring.com
Corrosion ResistantEpoxy PaintIntended for on-grade use,
the CR version is coated wi
fusion-bonded epoxy paint
help prevent corrosion.
2 Inch Conduit Ready To meet expanding AV and data
needs, the Hubbell SystemOne
Recessed Floor Box line readily
accepts 2 inch conduits with the use
of a 2 inch threaded conduit hub.
The offset design allows for less
conduit lifting while threading and the
hub mounting holes are asymmetrical
for installation efciency.
Concrete Pour Pocket CapIn concrete applications, all SystemOne
Recessed oor boxes include a yellow
pour pocket cap.
This factory-installed, eld-removable
pour pocket cap provides a pocket in the
nal oor to accept the covers intended
for terrazzo, tile, or nished concrete oor. The cap may not be used for carpet,
wood or engineered oors.
Benefits and Enhancements
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
6/32
Wiring Systems
®
6 www.hubbell-wiring.com
SystemOne for Concrete Floors
Cover
• 180° cover opening
• Two large cable egress doors• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• Available in round, rectangular and furniture feed styles
• All covers are ADA compliant
• Post pour adjustment
Box
• Minimum pour depths of 2 ½ in. to 3 ¼ in.
• 16 gauge galvanized sheet metal construction
• Optional fusion-bonded, green epoxy paint for on-grade use
• 6 in. solid conductor ground pigtail in each gang
• 3 in. deep version accepts adapter (CFBHUB2 ) for 2 in. conduit
• Pre pour adjustment
• Meets UL 514A requirements and are UL scrub water compliant
• Patent pending, labor saving, easy mount device plates
CR version is coated with
fusion-bonded epoxy paint to
help prevent corrosion and
intended for on-grade use.
The Hubbell SystemOne 2-Gang
Recessed Concrete Floor Box
offers eight styles, satisfying
the requirements of almost anycommercial building application.
Rectangular or round covers, as
well as furniture feed covers, are
available in a variety of nishes to
blend with any existing or new décor.
A parallel-device layout reduces plug
interference, maximizing functionality
and performance.
Hubbell SystemOne 2-Gang Recessed Concrete Floor Box
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
7/32
Wiring Systems
®
7www.hubbell-wiring.com
SystemOne for Concrete Floors
* 2 in. conduits requiire the use of CFBHUB2 (purchased separately). See page 9.
Hubbell SystemOne 2-Gang Floor Boxes
CFB2G30 Series - Rectangular Cover for 3 in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2 ) and a rectangular cover
• When a 3 in. concrete pour is required the insert is removed and requires the nished oor type to be
carpet or another engineered oor type
Includes:• Two removable knock-out plates (1 per gang) can be replaced with 2 in. zinc conduit hub (CFBHUB2 ) when needed
• A ½ in. plastic cover insert is included and allows for easy use in tile, nished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB2G30
CFB2G30CR
Standard
On-grade3 in. 2 ½ in. 35 cu. in. 24G / 2GFF ½ in. to 2 in.*
CFB2G25 Series - Rectangular Cover for 2 ½ in. Minimum Pour
• Designed for applications requiring up to 1 in. conduits and a rectangular cover
• When a 2 ½ in. concrete pour is required the insert is removed and requires the nished oor type to be
carpet or another engineered oor type
Includes:• A ½ in. plastic cover insert is included and allows for easy use in tile, nished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB2G25
CFB2G25CR
Standard
On-grade2 ½ in. 2 ½ in. 30 cu. in. 24G / 2GFF ½ in. to 1 in.
CFB2G30R Series - Round Cover for 3 ¾ in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2 ) and a round cover
• Minimum concrete pour of 3 ¾ in. and includes a collar for post pour adjustment of ¼ in.• Suitable for all oor nish types
Includes:• Two removable knock-out plates (1 per gang) can be replaced with 2 in. zinc conduit hub (CFBHUB2 ) when needed
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB2G30R
CFB2G30RCR
Standard
On-grade3 ¾ in. 2 ½ in. 35 cu. in.
CFBS1R6 /
CFBS1R6FF½ in. to 2 in.*
CFB2G25R Series - Round Cover for 3 ¼ in. Minimum Pour
• Designed for applications requiring up to 1 in. conduits and a round cover• Minimum concrete pour of 3 ¼ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all oor nish types
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB2G25R
CFB2G25RCR
Standard
On-grade3 ¼ in. 2 ½ in. 30 cu. in.
CFBS1R6 /
CFBS1R6FF½ in. to 1 in.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
8/32
• UL 514A Listed
8 www.hubbell-wiring.com
Wiring Systems
®
Hubbell SystemOne 2-Gang Covers • UL 514A Listed
SystemOne for Concrete Floors
Surface Style Rectangular Covers (for use with carpet, tile, VCT and other engineered oors)
• Compatible with CFB2G25, CFB2G25CR, CFB2G30 and CFB2G30CR
• Cover dimensions 11 11 / 16 in. x 7 3 / 16 in. and two large cable egress doors and access 180° opening
• Maximum static load of 800 lbs. with 2x safety factor*Finish Flush Surface With Insert Furniture Feed (1 in. and 2 in. Plugs)
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
24GCCVRALU
24GCCVRBK
24GCCVRBRS
24GCCVRBRZ
24GCCVRNK
24GCCVRALUC
24GCCVRBKC
24GCCVRBRSC
24GCCVRBRZC
24GCCVRNKC
2GCFFCVRALU
2GCFFCVRBK
2GCFFCVRBRS
2GCFFCVRBRZ
2GCFFCVRNK
Flush Style Rectangular Covers (for use with tile, nished concrete and Terrazzo oors)
• Compatible with CFB2G25, CFB2G25CR, CFB2G30 and CFB2G30CR
• Cover dimensions 10 11 / 16 in. x 6 3 / 16 in. and two large cable egress doors and access 180° opening
• Maximum static load of 800 lbs. with 2x safety factor*
Finish Flush Surface With Insert Furniture Feed (1 in. and 2 in. Plugs)
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
24GTCVRALU
24GTCVRBK
24GTCVRBRS
24GTCVRBRZ
24GTCVRNK
24GTCVRALUC
24GTCVRBKC
24GTCVRBRSC
24GTCVRBRZC
24GTCVRNKC
2GTFFCVRALU
2GTFFCVRBK
2GTFFCVRBRS
2GTFFCVRBRZ
2GTFFCVRNK
Round Covers (for use with all oor types)
• Compatible with CFB2G25R, CFB2G25RCR, CFB2G30R and CFB2G30RCR
• Cover has a 7 ½ in. outer diameter and two large cable egress doors and access 180° opening
• Maximum static load of 1000 lbs. with 2x safety factor*
Finish Flush Surface Furniture Feed (¾ in. and 2 in. Plugs)
Brushed Aluminum
Black Powder CoatedBrass Plated
Bronze Plated
Satin Nickel Plated
CFBS1R6CVRALU
CFBS1R6CVRBLKCFBS1R6CVRBRS
CFBS1R6CVRBRZ
CFBS1R6CVRNKL
CFBS1R6FFCVRALU
CFBS1R6FFCVRBLKCFBS1R6FFCVRBRS
CFBS1R6FFCVRBRZ
CFBS1R6FFCVRNKL
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
9/32
Wiring Systems
®
Plates for use in 2-, 4- and 6-Gang Floor Boxes
• UL 514A listed
Plate
Style
(1) Decorator
Opening
(1) Duplex
Opening
(2) Extron®
MAAP Openings
(2) Extron®
OpeningsCat. No. FBMPREC FBMPDUP FBMPMAAP FBMPAAP
Plate
Style
(2) 1U Hubbell
iStation Openings
(1) 1.5U Hubbell
iStation Opening
(1) Simplex Opening
1.40 in. Diameter
(1) Twist-Lock ® Opening
1.60 in. Diameter
Cat. No. FBMP2IM FBMP15IM FBMP139 FBMP156
Plate
Style 1-Gang Blank
Cable Feed Through
with Bushing
(1) Opening for
TracJack ® or Series II®(1) Opening with Hubbell ISF6
Frame for Keystone Jacks
Cat. No. FBMPBNK FBMPFT FBMPTRAC FBMP6KS
Pre-Wired Device Plates
• Reduces wiring and installation times
• 8 in. stranded leads mounted to the face plate
Description Type 15A 20A Duplex, Gray Standard
Tamper-Resistant
PWFBMPCR15GRY
PWFBMPCR15GRYTR
PWFBMPCR20GRY
PWFBMPCR20GRYTR
Decorator, Gray Standard
Tamper-Resistant
PWFBMPDR15GRY
PWFBMPDR15GRYTR
PWFBMPDR20GRY
PWFBMPDR20GRYTR
9www.hubbell-wiring.com
SystemOne for Concrete Floors
Accessories
Description Catalog Number
2 in. threaded zinc hub for use with CFB2G30, CFB4G30 and
CFB6G30 series oor boxes; replaces CFBKOPLATE
CFBHUB2
Replacement knock-out plate
Replacement knock-out plate with epoxy coating
CFBKOPLATE
CFBKOPLATECR
Replacement wire-way, used to pass wires from one compartment
to the other, for use in CFB2G30/CR rectangular boxes
CFB2WW
Finished oor height adjustment ring - increase post
pour adjustment; use with CFBS1R6 cover series
0 - ¼ in.
¼ in. - ½ in.
½ in. - ¾ in.
CFB6RCVRR1*
CFB6RCVRR2
CFB6RCVRR3
*Included with standard CFB2G30R and CFB2G25R series.
Hubbell SystemOne 2-Gang Plates and Accessories
Extron® is a registered trademark of Extron Electronics.Crestron® is a registered trademark of Crestron Electronics, Inc.FSR® is a registered trademark of FSR Inc.
TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
10/32
Wiring Systems
®
10 www.hubbell-wiring.com
Cover
• 180° cover opening
• Two large cable egress doors• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• Available with round or rectangular covers
• All covers are ADA compliant
• Post pour adjustment
Box
• Minimum pour depths of 2 ½ in. to 3 ¾ in.
• 16 gauge galvanized sheet metal and cast iron construction
• Optional fusion-bonded, green epoxy paint for on-grade use
• 6 in. solid conductor ground pigtail in each gang
• 3 in. deep version accepts adapter (CFBHUB2 ) for 2 in. conduit
• Pre pour adjustment
• Meets UL 514A requirements and are scrub water compliant
• Patent pending, labor saving, easy mount device plates
CR version is coated with
fusion-bonded epoxy paint to
help prevent corrosion and
intended for on-grade use.
Similar to the 2-Gang Recessed
Concrete Floor Box, Hubbell’s
SystemOne 4-Gang Recessed
Concrete Floor Box is available withrectangular or round covers. Ten
different styles make it possible to meet
the electrical requirements of most
commercial projects - new construction
or renovation. The parallel device layout
maximizes functionality which can be
limited when devices are mounted 90°
from one another.
Hubbell SystemOne 4-Gang Recessed Concrete Floor Box
SystemOne for Concrete Floors
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
11/32
Wiring Systems
®
11www.hubbell-wiring.com
* 2 in. conduits requiire the use of CFBHUB2 (purchased separately). See page 13.
SystemOne for Concrete Floors
CFB4G30 Series – Rectangular Covers for 3 in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2 ) and a rectangular cover
• When a 3 in. concrete pour is required the insert is removed and requires the nished oor type to be
carpet or another engineered oor type
Includes:• Four removable knock-out plates (1 per gang) can be replaced with 2 in. zinc conduit hub (CFBHUB2 )
when needed
• A ½ in. plastic cover insert is included and allows for easy use in tile, nished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB4G30
CFB4G30CR
Standard
On-grade3 in. 2 ½ in. 32.5 cu. in. 24G ½ in. to 2 in.*
CFB4G30CI Cast Iron 3 ¾ in. 2 ½ in. 32.5 cu. in. 24G ¾ in. to 1½ in.
CFB4G25 Series – Rectangular Covers for 2 ½ in. Minimum Pour
• Designed for applications requiring up to 1 in. conduits and a rectangular cover
• When a 2 ½ in. concrete pour is required the insert is removed and requires the nished oor type to be
carpet or another engineered oor type
Includes:• A ½ in. plastic cover insert is included and allows for easy use in tile, nished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB4G25
CFB4G25CR
Standard
On-grade2 ½ in. 2 ½ in. 26.5 cu. in. 24G ½ in. to 1 in.
CFB4G30R Series – Round Covers for 3 ¾ in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2 ) and a round cover
• Minimum concrete pour of 3 ¾ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all oor nish types
Includes:• Four removable knock-out plates (1 per gang) can be replaced with 2 in. zinc conduit hub (CFBHUB2 )
when needed
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB4G30R
CFB4G30RCR
Standard
On-grade3 ¾ in. 2 ½ in. 32.5 cu. in. CFBS1R8 ½ in. to 2 in.*
CFB4G30RCI Cast Iron 4 in. 2 ½ in. 32.5 cu. in. CFBS1R8 ¾ in. to 1½ in.
CFB4G25R Series – Round Covers for 3 ¼ in. Minimum Pour
• Designed for applications requiring up to 1 in. conduits and a round cover
• Minimum concrete pour of 3 ¼ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all oor nish types
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB4G25R
CFB4G25RCR
Standard
On-grade3 ¼ in. 2 ½ in. 26.5 cu. in. CFBS1R8 ½ in. to 1 in.
Hubbell SystemOne 4-Gang Floor Boxes
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
12/32
• UL 514A Listed
12 www.hubbell-wiring.com
Wiring Systems
®
Surface Style Rectangular Covers (for use with carpet, tile, VCT and other engineered oors)
• Compatible with CFB4G25, CFB2G25CR, CFB4G30, CFB4G30CR and CFB4G30CI
• Cover dimensions 11 11 / 16 in. x 7 3 / 16 in. and two large cable egress doors and access 180° opening
• Maximum static load of 800 lbs. with 2x safety factor*
Finish Flush Surface With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
24GCCVRALU
24GCCVRBK
24GCCVRBRS
24GCCVRBRZ
24GCCVRNK
24GCCVRALUC
24GCCVRBKC
24GCCVRBRSC
24GCCVRBRZC
24GCCVRNKC
Flush Style Rectangular Covers (for use with tile, nished concrete and Terrazzo oors)
• Compatible with CFB4G25, CFB2G25CR, CFB4G30, CFB4G30CR and CFB4G30CI
• Cover dimensions 10 11 / 16 in. x 6 3 / 16 in. and two large cable egress doors and access 180° opening
• Maximum static load of 800 lbs. with 2x safety factor*
Finish Flush Surface With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
24GTCVRALU
24GTCVRBK
24GTCVRBRS
24GTCVRBRZ
24GTCVRNK
24GTCVRALUC
24GTCVRBKC
24GTCVRBRSC
24GTCVRBRZC
24GTCVRNKC
Round Covers (for use with all oor types)
• Compatible with CFB4G25R, CFB4G25RCR, CFB4G30R, CFB4G30RCR and CFB4G30RCI
• Cover has a 9 ½ in. outer diameter and two large cable egress doors and access 180° opening
• Maximum static load of 1000 lbs. with 2x safety factor*
Finish Flush Surface
Brushed AluminumBlack Powder Coated
Brass Plated
Bronze Plated
Satin Nickel Plated
CFBS1R8CVRALUCFBS1R8CVRBLK
CFBS1R8CVRBRS
CFBS1R8CVRBRZ
CFBS1R8CVRNKL
Hubbell SystemOne 4-Gang Covers
SystemOne for Concrete Floors
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
13/32
Wiring Systems
®
Plates for use in 2-, 4- and 6-Gang Floor Boxes
• UL 514A listed
Plate
Style
(1) Decorator
Opening
(1) Duplex
Opening
(2) Extron®
MAAP Openings
(2) Extron®
OpeningsCat. No. FBMPREC FBMPDUP FBMPMAAP FBMPAAP
Plate
Style
(2) 1U Hubbell
iStation Openings
(1) 1.5U Hubbell
iStation Opening
(1) Simplex Opening
1.40 in. Diameter
(1) Twist-Lock ® Opening
1.60 in. Diameter
Cat. No. FBMP2IM FBMP15IM FBMP139 FBMP156
Plate
Style 1-Gang Blank
Cable Feed Through
with Bushing
(1) Opening for
TracJack ® or Series II®(1) Opening with Hubbell ISF6
Frame for Keystone Jacks
Cat. No. FBMPBNK FBMPFT FBMPTRAC FBMP6KS
Pre-Wired Device Plates
• Reduces wiring and installation times
• 8 in. stranded leads mounted to the face plate
Description Type 15A 20A Duplex, Gray Standard
Tamper-Resistant
PWFBMPCR15GRY
PWFBMPCR15GRYTR
PWFBMPCR20GRY
PWFBMPCR20GRYTR
Decorator, Gray Standard
Tamper-Resistant
PWFBMPDR15GRY
PWFBMPDR15GRYTR
PWFBMPDR20GRY
PWFBMPDR20GRYTR
13www.hubbell-wiring.com
Accessories
Description Catalog Number
2 in. threaded zinc hub for use with CFB2G30, CFB4G30 and
CFB6G30 series oor boxes; replaces CFBKOPLATE
CFBHUB2
Replacement knock-out plate Standard
Epoxy Coating
CFBKOPLATE
CFBKOPLATECR
Replacement wire-way, used to pass wires from one
compartment to the other, for use in rectangular boxes
CFB4G30/CR
CFB4G25/CR
CFB46WW
CFB4WW
Finished oor height adjustment ring - increase post
pour adjustment; use with CFBS1R8 cover series
0 - ¼ in.
¼ in. - ½ in.
½ in. - ¾ in.
CFB8RCVRR1*
CFB8RCVRR2
CFB8RCVRR3
Replacement low voltage divider CFB46DIV
*Included with standard CFB4G30R and CFB4G25R series.
SystemOne for Concrete Floors
Hubbell SystemOne 4-Gang Plates and Accessories
Extron® is a registered trademark of Extron Electronics.Crestron® is a registered trademark of Crestron Electronics, Inc.FSR® is a registered trademark of FSR Inc.
TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
14/32
Wiring Systems
®
14 www.hubbell-wiring.com
CR version is coated with
fusion-bonded epoxy paint to
help prevent corrosion and
intended for on-grade use.
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• Available with round or rectangular covers
• All covers are ADA compliant
• Post pour adjustment
Box
• Minimum pour depth of 3 in. to 3 ¾ in.
• 16 gauge galvanized sheet metal construction
• Optional fusion-bonded, green epoxy paint for on-grade use
• 6 in. solid conductor ground pigtail in each gang
• 3 in. deep version accepts adapter (CFBHUB2 ) for 2 in. conduit
• Pre pour adjustment
• Meets UL 514A requirements and are scrub water compliant
• Patent pending, labor saving, easy mount device plates
Increased power, data, and AV
capacity is what the Hubbell
SystemOne 6-Gang Recessed
Concrete Floor Box was designed
to handle. Four styles allow the
oor box to work within almost any
commercial application to enhance
connectivity. Rectangular and round
covers are available in a variety of
nishes that work with any aesthetic
or nish.
Hubbell SystemOne 6-Gang Recessed Concrete Floor Box
SystemOne for Concrete Floors
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
15/32
Wiring Systems
®
15www.hubbell-wiring.com
HIGH CAPACITY
FEED-THRU
GANGS
SystemOne for Concrete Floors
CFB6G30 Series – Rectangular Covers for 3 in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2 ) and a rectangular cover
• When a 3 in. concrete pour is required the insert is removed and requires the nished oor type to be
carpet or another engineered oor type
Includes:• Eight removable knock-out plates (1 per center device, 2 per gang) can be replaced with 2 in. zinc conduit hub
(CFBHUB2 ) when needed
• A ½ in. plastic cover insert is included and allows for easy use in tile, nished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB6G30
CFB6G30CR
Standard
On-grade3 in. 2 ½ in.
33 cu. in./
89 cu. in 610G ½ in. to 2 in.*
CFB6G30R Series – Round Covers for 3 ¾ in. Minimum Pour• Designed for applications requiring up to 2 in. conduits (with use of CFBHUB2 ) and a round cover
• Minimum concrete pour of 3 ¾ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all oor nish types
Includes:• Eight removable knock-out plates (1 per center device, 2 per gang) can be replaced with 2 in. zinc conduit hub
(CFBHUB2 ) when needed
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB6G30R
CFB6G30RCR
Standard
On-grade3 ¾ in. 2 ½ in.
33 cu. in./
89 cu. in CFBS1R8 ½ in. to 2 in.*
Oversized Gangs
* 2 in. conduits requiire the use of CFBHUB2 (purchased separately). See page 17.
Hubbell SystemOne 6-Gang Floor Boxes
The 6-Gang oor box provides:
• Two (2) high capacity feed-thru gangs - allow for extra capacity when pulling wires or cables for a run of
boxes. Only one gang is needed when feeding a single service.
• Four (4) standard gangs - allow for maximum exibility in conguring the box.
Note: Each box has a total of 1-Gang positions as shown below.6
Oversized Gang
4
53
62
1
4
53
62
1
4
53
62
1
Oversized Gang
Oversized Gang
Oversized Gang
Oversized Gang
Oversized Gang
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
16/32
• UL 514A Listed
16 www.hubbell-wiring.com
Wiring Systems
®
Hubbell SystemOne 6-Gang Covers
SystemOne for Concrete Floors
Surface Style Rectangular Covers (for use with carpet, tile, VCT and other engineered oors)
• Compatible with CFB6G30 and CFB6G30CR
• Cover dimensions 11 ½ in. x 10 in. and two large cable egress doors and access 180° opening
• Maximum static load of 1500 lbs. with 2x safety factor*
Finish Flush Surface With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
610GCCVRALU
610GCCVRBK
610GCCVRBRS
610GCCVRBRZ
610GCCVRNK
610GCCVRALUC
610GCCVRBKC
610GCCVRBRSC
610GCCVRBRZC
610GCCVRNKC
Flush Style Rectangular Covers (for use with tile, nished concrete and Terrazzo oors)
• Compatible with CFB6G30 and CFB6G30CR
• Cover dimensions 10 ½ in. x 9 in. and two large cable egress doors and access 180° opening
• Maximum static load of 1500 lbs. with 2x safety factor*
Finish Flush Surface With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
610GTCVRALU
610GTCVRBK
610GTCVRBRS
610GTCVRBRZ
610GTCVRNK
610GTCVRALUC
610GTCVRBKC
610GTCVRBRSC
610GTCVRBRZC
610GTCVRNKC
Round Covers (for use with all oor types)
• Compatible with CFB6G30R and CFB6G30RCR
• Cover has a 9 ½ in. outer diameter and two large cable egress doors and access 180° opening
• Maximum static load of 1000 lbs. with 2x safety factor*
Finish Flush Surface
Brushed Aluminum
Black Powder Coated
Brass Plated
Bronze Plated
Satin Nickel Plated
CFBS1R8CVRALU
CFBS1R8CVRBLK
CFBS1R8CVRBRS
CFBS1R8CVRBRZ
CFBS1R8CVRNKL
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
17/32
Wiring Systems
®
Plates for use in 2-, 4- and 6-Gang Floor Boxes
• UL 514A listed
Plate
Style
(1) Decorator
Opening
(1) Duplex
Opening
(2) Extron®
MAAP Openings
(2) Extron®
OpeningsCat. No. FBMPREC FBMPDUP FBMPMAAP FBMPAAP
Plate
Style
(2) 1U Hubbell
iStation Openings
(1) 1.5U Hubbell
iStation Opening
(1) Simplex Opening
1.40 in. Diameter
(1) Twist-Lock ® Opening
1.60 in. Diameter
Cat. No. FBMP2IM FBMP15IM FBMP139 FBMP156
Plate
Style 1-Gang Blank
Cable Feed Through
with Bushing
(1) Opening for
TracJack ® or Series II®(1) Opening with Hubbell ISF6
Frame for Keystone Jacks
Cat. No. FBMPBNK FBMPFT FBMPTRAC FBMP6KS
Pre-Wired Device Plates
• Reduces wiring and installation times
• 8 in. stranded leads mounted to the face plate
Description Type 15A 20A Duplex, Gray Standard
Tamper-Resistant
PWFBMPCR15GRY
PWFBMPCR15GRYTR
PWFBMPCR20GRY
PWFBMPCR20GRYTR
Decorator, Gray Standard
Tamper-Resistant
PWFBMPDR15GRY
PWFBMPDR15GRYTR
PWFBMPDR20GRY
PWFBMPDR20GRYTR
17www.hubbell-wiring.com
SystemOne for Concrete Floors
Hubbell SystemOne 6-Gang Plates and Accessories
Accessories
Description Catalog Number
2 in. threaded zinc hub for use with CFB2G30, CFB4G30 and
CFB6G30 series oor boxes; replaces CFBKOPLATE
CFBHUB2
Replacement knock-out plate Standard
Epoxy Coating
CFBKOPLATE
CFBKOPLATECR
Replacement wire-way, used to pass wires from one
compartment to the other, for use in rectangular boxes
CFB4G30/CR CFB46WW
Finished oor height adjustment ring - increase post
pour adjustment; use with CFBS1R8 cover series
0 - ¼ in.
¼ in. - ½ in.
½ in. - ¾ in.
CFB8RCVRR1*
CFB8RCVRR2
CFB8RCVRR3
Replacement low voltage divider CFB46DIV
*Included with standard CFB6G30R series.
Extron® is a registered trademark of Extron Electronics.Crestron® is a registered trademark of Crestron Electronics, Inc.FSR® is a registered trademark of FSR Inc.
TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
18/32
Wiring Systems
®
18 www.hubbell-wiring.com
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• Available with round or rectangular covers
• All covers are ADA compliant
• Post pour adjustment
Box
• Minimum pour depths of 5 ½ in. to 6 ¼ in.• 16 gauge galvanized sheet metal construction
• Optional fusion-bonded, green epoxy paint for on-grade use
• 6 in. solid conductor ground pigtail in each gang
• Pre pour adjustment
• Meets UL 514A requirements and are scrub water compliant
CR version is coated with
fusion-bonded epoxy paint to
help prevent corrosion and
intended for on-grade use.
With maximum capacity in a small
footprint, the 10-Gang box provides
a uniform look with rectangular or
round covers that are available inseveral nishes to complement
existing décor. Electrical devices are
mounted vertically and are mounted
to the plate prior to securing it to
the box. Two inch knockouts are
designed into each box allowing for
simple installation of AV cables with
pre-connectorized heads and specic
bend radius requirements.
Hubbell SystemOne 10-Gang Recessed Concrete Floor Box
SystemOne for Concrete Floors
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
19/32
Wiring Systems
®
19www.hubbell-wiring.com
SystemOne for Concrete Floors
CFB10G55 Series – Rectangular Covers for 5 ½ in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (integrated 2 in. knockouts) and a rectangular cover
• When a 5 ½ in. concrete pour is required the insert is removed and requires the nished oor type to be
carpet or another engineered oor typeIncludes:
• A ½ in. plastic cover insert is included and allows for easy use in tile, nished concrete or other mediums
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB10G55
CFB10G55CR
Standard
On-grade5 ½ in. 2 ½ in.
33 cu. in./
89 cu. in610G ¾ in. to 2 in.
CFB10G55R Series – Round Covers for 6 ¼ in. Minimum Pour
• Designed for applications requiring up to 2 in. conduits (integrated 2 in. knockouts) and a round cover• Minimum concrete pour of 6 ¼ in. and includes a collar for post pour adjustment of ¼ in.
• Suitable for all oor nish types
Catalog
Number
Box
Type
Min.Pour
Depth
Plate
Depth
Device
Volume
Cover
Series Knockouts
CFB10G55R
CFB10G55RCR
Standard
On-grade6 ¼ in. 2 ½ in.
33 cu. in./
89 cu. inCFBS1R8 ¾ in. to 2 in.
Plate Layout - NEC® Required Volume
Hubbell SystemOne 10-Gang Floor Boxes
CFB10NEMA46 148 cu. in.
CFB10NEMA 68 cu. in. 80 cu. in.
Standard layout 25 cu. in. 48 cu. in. 71 cu. in.
1 2 3 4 5
WI RE -W
A Y
10 9 8 7 6
Standard layout 25 cu. in. 48 cu. in. 71 cu. in.
CFB10NEMA 68 cu. in. 80 cu. in.
CFB10NEMA4G 148 cu. in.
CFB10NEMA
CFB10NEMA4G
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
20/32
• UL 514A Listed
20 www.hubbell-wiring.com
Wiring Systems
®
Surface Style Rectangular Covers (for use with carpet, tile, VCT and other engineered oors)
• Compatible with CFB10G55 and CFB10G55CR
• Cover dimensions 11 ½ in. x 10 in. and two large cable egress doors and access 180° opening
• Maximum static load of 1500 lbs. with 2x safety factor*
Finish Flush Surface With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
610GCCVRALU
610GCCVRBK
610GCCVRBRS
610GCCVRBRZ
610GCCVRNK
610GCCVRALUC
610GCCVRBKC
610GCCVRBRSC
610GCCVRBRZC
610GCCVRNKC
Flush Style Rectangular Covers (for use with tile, nished concrete and Terrazzo oors)
• Compatible with CFB10G55 and CFB10G55CR
• Cover dimensions 10 ½ in. x 9 in. and two large cable egress doors and access 180° opening
• Maximum static load of 1500 lbs. with 2x safety factor*
Finish Flush Surface With Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
610GTCVRALU
610GTCVRBK
610GTCVRBRS
610GTCVRBRZ
610GTCVRNK
610GTCVRALUC
610GTCVRBKC
610GTCVRBRSC
610GTCVRBRZC
610GTCVRNKC
Round Covers (for use with all oor types)
• Compatible with CFB10G55R and CFB10G55RCR
• Cover has a 9 ½ in. outer diameter and two large cable egress doors and access 180° opening
• Maximum static load of 1000 lbs. with 2x safety factor*
Finish Flush Surface
Brushed Aluminum
Black Powder Coated
Brass Plated
Bronze Plated
Satin Nickel Plated
CFBS1R8CVRALU
CFBS1R8CVRBLK
CFBS1R8CVRBRS
CFBS1R8CVRBRZ
CFBS1R8CVRNKL
Hubbell SystemOne 10-Gang Covers
SystemOne for Concrete Floors
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
21/32
Wiring Systems
®
21www.hubbell-wiring.com
Accessories
Description Catalog NumberReplacement wire-way, used to pass wires from one compartment
to the other, for use in CFB10G55/CR rectangular boxes
CFB10WW
Replacement low voltage divider CFB10DIV
Finished oor height adjustment ring - increase post
pour adjustment; use with CFB10G30R cover series
0 - ¼ in.
¼ in. - ½ in.
½ in. - ¾ in.
CFB8RCVRR1*
CFB8RCVRR2
CFB8RCVRR3
*Included with standard CFB10G30R series.
SystemOne for Concrete Floors
Hubbell SystemOne 10-Gang Plates and Accessories
Pre-Wired Device Plates
• Reduces wiring and installation times
• 8 inch stranded leads mounted to the face plate
Description Type 15A 20A
Duplex, Gray Standard
Tamper-Resistant
PWFBMPCR15GRY
PWFBMPCR15GRYTR
PWFBMPCR20GRY
PWFBMPCR20GRYTR
Decorator, Gray Standard
Tamper-Resistant
PWFBMPDR15GRY
PWFBMPDR15GRYTR
PWFBMPDR20GRY
PWFBMPDR20GRYTR
Extron® is a registered trademark of Extron Electronics.Crestron® is a registered trademark of Crestron Electronics, Inc.FSR® is a registered trademark of FSR Inc.
TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
CFB10 Series – Plates
Plate
Style
(1) Decorator
Opening
(1) Duplex
Opening Blank
Decorator Opening Plate
Including Hubbell ISF6GY
(2) Openings to Accommodate
(6) Ortronics TrackJack ®
Cat. No. FB10MPREC FB10MPDUP FB10MPBNK FB10MPKEY FB10MPTRAC
Plate
Style (2) Decorator
(4) Extron® MAAP
Modules
(4) Extron® AAP
Modules
For (6) 1U Hubbell
iStation Modules
Replacement Spacer
Around Wire-Way
Cat. No. FB10MP2A FB10MPMAAP FB10MPAAP FB10MP2B FB10MPX
Plate
Style
(1) Twist-Lock ® Opening
1.60 in. Dia. (Uses 2 Gangs)
(1) Simplex Opening
1.40 in. Dia. (Uses 2 Gangs)
(2) Twist-Lock ® Opening
1.60 in. Dia. (Uses 3 Gangs)
(2) Simplex Opening
1.40 in. Dia. (Uses 3 Gangs)
Cat. No. FB10TLA FB10TLX FB10TLB FB10TLY
Plate
Style
(3) Twist-Lock ® Opening
1.60 in. Dia. (Uses 5 Gangs)
(3) Simplex Opening
1.40 in. Dia. (Uses 5 Gangs)
(2) 2-Gang. Meets NEMA
Spacing. Ideal for Crestron®
DM –TX Product and Power
(4) Single Service Openings
Utilizing NEMA Wallplate
(Uses 5 Gangs)
Cat. No. FB10TLC FB10TLZ CFB10NEMA CFB10NEMA4G
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
22/32
22 www.hubbell-wiring.com
Wiring Systems
®
Wiring Systems
®
Selecting a Raised Access Floor Box
Box Depth 2
2 ½ in. 3 in. 2 ½ in. 5 in. 5 ½ in. 6 ¼ in.
C a p a c i t y 1
2-Gang
• AFB2G25
S e l e c t C o r r e c t C a t
a l o g N u m b e r 4
• AFB2G25CHI
• AFB2G50
• AFB2G50CHI
4-Gang
• AFB4G25
• AFB4G25CHI
• AFB4G50
• AFB4G50CHI
• RAFB4BASE
10-Gang• AFB10G55
• AFB10G55CHI
Rectangular Rectangular Furniture Feed Furniture Feed Rectangular Round
Cover Style 3
Hubbell SystemOne Recessed Floor Boxes
To assist with the oor box selection process please have the following information available:
Electrical requirements: Box depth Cover style:
Power (each electrical device requires one gang)
Data/AV (consult manufacturers’ specication for
size/volume requirements), number required.
Add up total number to determine needed capacity.
If necessary capacity is not shown round up to next size.
Example: 9-Gang rounds up to a 10-Gang oor box.
Determine maximum
tile thickness and
station height and addtogether. Box depth
can not exceed total.
Round
Rectangular
Once this information is gathered start on the right column “capacity” select necessary box, then select
the concrete pour depth and on-grade or above-grade application, and nally cover style. Locate inter
connecting point of all three categories and move to right to select correct catalog number.
1 Capacity: Select necessary box.
2 Box Depth: Determine maximum possible depth (tile and station height total) and select a depth less
than the calculated height.
3 Cover Style: Select Round or Rectangular, not all box sizes are available in round.
4 Locate interconnecting point of all three categories and move to right to select correct catalog number.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
23/32
Wiring Systems
www.hubbell-wiring.com 23
aised Access Applications
Benefits and Enhancements
Safety
• Low profile flanges meet ADA requirements
• Hide-away egress door fold under cover while in use
• 180° opening of main doors
Functionality • Cables and connections are protected by recessed
functionality
• Open architecture sub-plate design
• Dirt ingress reduced by egress door brushes
• Meets UL 514A scrub water requirements with
ScrubShield® technology
• Easy selection with common flange for all f loor types
• Round and rectangular box versions available
Value
• Enhance building décor with numerous finishes
• Increase durability and longevity with cast aluminum covers
Online Resources
• BIM models, customer drawings and technical specifications are available on www.hubbell-wiring.com
Visit web site for information on Hubbell's Pre-wired, Plug and Play, Connexion® System.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
24/32
Wiring Systems
®
24 www.hubbell-wiring.com
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• All covers are ADA compliant
• Furniture feed covers available
Ideal for applications that call for basic
power and data/AV requirements. The
2-Gang boxes can be used as an
access point to electrical or data
connections, or as a furniture feed
to power interior furniture partitions.
Available in two box depths, the 2 ½
in. depth works well in oors using
short pedestals; the 5 in. depth is ideal
for furniture feed applications. The
rectangular covers are available
in assorted nishes to enhance any
design scheme.
Hubbell SystemOne 2-Gang Rectangular Raised Access Floor Box
SystemOne for Raised Access Floors
Box
• 16 gauge galvanized sheet metal construction• 6 in. solid conductor ground pigtail in each gang
• 2 ½ in. or 5 in. box depths
• 5.0 in. deep box allows for 2 in. conduits
• Mounts in tiles ¾ in. to 2 in. thick
• Fits is 6 ¾ in. x 12 7 / 8 in. opening
• Patent pending, labor saving, easy mount device plates
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
25/32
Wiring Systems
®
25www.hubbell-wiring.com
SystemOne for Raised Access Floors
AFB2G Series – Rectangular Box
• Designed for wood and tile applications
• 5 in. deep box allows for 2 in. conduits - ideal for furniture feed applications
• 2 ½ in. provides a solution for oors using short pedestalsCatalog
Number
Box
Type Knockouts
Box
Depth
Max Tile
Thickness
Plate
Depth
Device
Volume
Cover
Series
AFB2G50
AFB2G50CHI
Standard
Chicago
½ in. to 2 in.
None5 in. 2 in. 2 ½ in. 60 cu. in. 2GAFB
AFB2G25
AFB2G25CHI
Standard
Chicago
½ in. and ¾ in.
None2 ½ in. 2 in. 2 ½ in. 30 cu. in. 2GAFB
Rectangular Covers (for use with raised access tiles and wood oors)
• Die cast construction available in ve nishes
• UL 514A listed
• Furniture feed includes one 2 in. conduit hub and one 1 in. conduit hub with reducer to ¾ in.
• Maximum static load of 800 lbs with 2x safety factor*
Finish Surface Style Cover
Surface Style
Cover with Inser t Furniture Feed Cover
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
2GAFBCVRALU
2GAFBCVRBK
2GAFBCVRBRS
2GAFBCVRBRZ
2GAFBCVRNK
2GAFBCVRALUC
2GAFBCVRBKC
2GAFBCVRBRSC
2GAFBCVRBRZC
2GAFBCVRNKC
2GAFBFFCVRALU
2GAFBFFCVRBK
2GAFBFFCVRBRS
2GAFBFFCVRBRZ
2GAFBFFCVRNK
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
2-Gang Rectangular Floor Boxes, Covers and Plates
Extron® is a registered trademark of Extron Electronics.Crestron® is a registered trademark of Crestron Electronics, Inc.FSR® is a registered trademark of FSR Inc.
TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
Plates - for use in 2, 4 and 6-Gang Floor Boxes
• UL 514A listed
PlateStyle
(1) DecoratorOpening
(1) DuplexOpening
(2) Extron®
MAAP Openings
(2) Extron®
Openings
Cat. No. FBMPREC FBMPDUP FBMPMAAP FBMPAAP
Plate
Style
(2) 1U Hubbell
iStation Openings
(1) 1.5U Hubbell
iStation Opening
(1) Simplex Opening
1.40 in. Diameter
(1) Twist-Lock ® Opening
1.60 in. Diameter
Cat. No. FBMP2IM FBMP15IM FBMP139 FBMP156
Plate
Style 1-Gang Blank
Cable Feed Through
with Bushing
(1) Opening for
TracJack ® or Series II®(1) Opening w/ Hubbell ISF6
Frame for Keystone Jacks
Cat. No. FBMPBNK FBMPFT FBMPTRAC FBMP6KS
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
26/32
Wiring Systems
®
26 www.hubbell-wiring.com
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• All covers are ADA compliant
The Hubbell SystemOne 4-Gang
Recessed Raised Access Floor Box
delivers AV plus power. Similar to the
2-Gang recessed raised access oor
box, the 4-Gang 2 ½ inch box depth
provides a solution for oors using
short pedestals. The 5 inch depth
is ideal for applications with a lot of
requirements. Rectangular covers
in a variety of nishes will match any
existing or new style.
Hubbell SystemOne 4-Gang Rectangular Raised Access Floor Box
SystemOne for Raised Access Floors
Box
• 16 gauge galvanized sheet metal construction• 6 in. solid conductor ground pigtail in each gang
• 2 ½ in. or 5 in. box depths
• 5.0 in. deep box allows for 2 in. conduits
• Mounts in tiles ¾ in. to 2 in. thick
• Fits is 11 in. x 11 in. opening
• Patent Pending, labor saving, easy mount device plates
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
27/32
Wiring Systems
®
27www.hubbell-wiring.com
SystemOne for Raised Access Floors
4-Gang Floor Rectangular Boxes, Covers and Plates
Extron® is a registered trademark of Extron Electronics.Crestron® is a registered trademark of Crestron Electronics, Inc.FSR® is a registered trademark of FSR Inc.
TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
AFB4G Series – Rectangular Box
• Designed for wood and tile applications
• 2 ½ in. provides a solution for oors using short pedestals
• 5 in. deep box allows for 2 in. conduits - ideal for furniture feed applicationsCatalog
Number
Box
Type Knockouts
Box
Depth
Max Tile
Thickness
Plate
Depth
Device
Volume
Cover
Series
AFB4G50
AFB4G50CHI
Standard
Chicago
½ in. to 2 in.
None5 in. 2 in. 2 ½ in. 57.5 cu. in. 4GAFB
AFB4G25
AFB4G25CHI
Standard
Chicago
½ in. and ¾ in.
None2 ½ in. 2 in. 2 ½ in. 26.5 cu. in. 4GAFB
Rectangular Covers (for use with raised access tiles and wood oors)
• Die cast construction available in ve nishes
• UL 514A listed
• Maximum static load of 1500 lbs with 2x safety factor*
Finish Surface Style Cover Surface Style Cover with Insert
Aluminum Powder Coated
Black Powder Coated
Brass Powder Coated
Bronze Powder Coated
Satin Nickel Powder Coated
4GAFBCVRALU
4GAFBCVRBK
4GAFBCVRBRS
4GAFBCVRBRZ
4GAFBCVRNK
4GAFBCVRALUC
4GAFBCVRBKC
4GAFBCVRBRSC
4GAFBCVRBRZC
4GAFBCVRNKC
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
Plates for use in 2, 4 and 6-Gang Floor Boxes
• UL 514A listed
Plate
Style
(1) Decorator
Opening
(1) Duplex
Opening
(2) Extron®
MAAP Openings
(2) Extron®
OpeningsCat. No. FBMPREC FBMPDUP FBMPMAAP FBMPAAP
Plate
Style
(2) 1U Hubbell
iStation Openings
(1) 1.5U Hubbell
iStation Opening
(1) Simplex Opening
1.40 in. Diameter
(1) Twist-Lock ® Opening
1.60 in. Diameter
Cat. No. FBMP2IM FBMP15IM FBMP139 FBMP156
PlateStyle 1-Gang Blank
Cable Feed Throughwith Bushing
(1) Opening for TracJack ® or Series II®
(1) Opening w/ Hubbell ISF6Frame for Keystone Jacks
Cat. No. FBMPBNK FBMPFT FBMPTRAC FBMP6KS
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
28/32
Wiring Systems
®
28 www.hubbell-wiring.com
Cover
• 180° cover opening
• Two large cable egress doors
• UL scrub water compliant
• Die cast aluminum cover construction
• All covers are ADA compliant
Box
• Fits in 8 in. diameter air diffuser holes• 16 gauge galvanized sheet metal construction
• Individual grounding screws for each gang
• 2 in. knock-out on the bottom allows for large amounts
of data and/or AV devices
• Mounts in tiles ¾ in. to 2 in. thick
With an 8 in. diameter, the Hubbell
SystemOne 4-Gang Round
Recessed Floor Box is ideal for use
in raised access oors with pre-cuttile or wood oor coverings. With a
variety of nish selections, the round
covers blend in with the ooring
and overall design of the building.
Deep, 2 ¾ in. wiring compartments
are ready to accommodate today’s
most advanced, high-performance
power, data, and AV needs to
supply reliable connectivity.
Hubbell SystemOne 4-Gang Round Raised Access Floor Box
SystemOne for Raised Access Floors
Incorporates four equally
sized device mounting plates
that accommodate NEMA
devices and an array of 3rd
party modules.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
29/32
Wiring Systems
®
29www.hubbell-wiring.com
SystemOne for Raised Access Floors
RAFB4 Series – Round Floor Box
Includes:• Base box shipped with temporary install cover
Catalog
Number Cover Series Depth
Tile
Thickness
Plate
Depth Knockouts Diameter
RAFB4BASE CFBS1R8 6 ¼ in. ¾ in. - 2 in. 2 ¾ in. ¾ in. - 2 in. 8 in.
RAFB4 Series – Round Floor Box with Cover
Includes:• RAFB4BASE and 8 in. cover
Cover Finish
Catalog
Number
Brushed Aluminum
Black Powder Coated
Brass Plated
Bronze Plated
Satin Nickel Plated
RAFB4ALU
RAFB4BLK
RAFB4BRS
RAFB4BRZ
RAFB4NKL
RAFB4 Series – Plates
• All RAFB4SP series plates are powder coated white
Plate
Style (1) Decorator (1) Duplex Blank
Cat. No. RAFB4SPDECO RAFB4SPDUPLEX RAFB4SPBLANK
Plate
Style(1) Simplex Opening
1.40 in. Dia.
(1) Twist-Lock ® Opening
1.60 in. Diameter
(1) Hubbell iStation
Opening for 3 Units
Cat. No. RAFB4SPTL14 RAFB4SPTL16 RAFB4SP3UIS
Plate
StyleOpening to Accept Bezels
for Ortronics TracJack ®(3) Extron®
MAAP Modules
(2) Extron®
AAP Modules
Cat. No. RAFB4SPORT RAFB4SP3MAAP RAFB4SP2AAP
4-Gang Round Floor Boxes, Covers and Plates
Extron® is a registered trademark of Extron Electronics.Crestron® is a registered trademark of Crestron Electronics, Inc.FSR® is a registered trademark of FSR Inc.
TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
30/32
Wiring Systems
®
30 www.hubbell-wiring.com
Cover
• 180° cover opening
• Two large cable egress doors
• Listed to UL 514A and UL scrub water compliant
• Die cast aluminum cover construction
• All covers are ADA compliant
Designed to serve high-capacity,
multi-service applications, the 10-Gang
oor box supports installation with an
array of Hubbell power, data and AV
devices. Third-party mounting plates
are available for other manufacturers’
devices, including FSR®, Crestron®
and Extron®. A 5 ½ in. box depth
offers great capacity for connectivity,
with the ability accept 2 in. conduit to
meet growing AV and data needs. The
rectangular covers come in a variety
of colors and nishes to enhance any
building’s design.
Hubbell SystemOne 10-Gang Rectangular Raised Access Floor Box
SystemOne for Raised Access Floors
Box
• 16 gauge galvanized sheet metal construction• 6 in. solid conductor ground pigtail in each gang
• 5 ½ in. deep box allows for 2 in. conduits
• Mounts in tiles ¾ in. to 2 in. thick
• Fits is 11 in. x 11 in. opening
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
31/32
Wiring Systems
®
31www.hubbell-wiring.com
SystemOne for Raised Access Floors
AFB10G Series – Rectangular Box
• Designed for wood and tile applications
• 5 ½ in. deep box allows for 2 in. conduits - ideal for furniture feed applications
Catalog
Number
Box
Type Knockouts
Box
Depth
Max Tile
Thickness
Plate
Depth
Device
Volume
Cover
Series
AFB10G55
AFB10G55CHI
Standard
Chicago
½ in. to 2 in.
None5.5 in. 2.0 in. 2.5 in 57.5 cu. in. 10GAFB
Rectangular Covers (for use with raised access tiles and wood oors)
• Die cast construction available in ve nishes
• UL 514A listed
• Maximum static load of 1500 lbs with 2x safety factor*
Finish Surface Style Cover Surface Style Cover with Insert
Aluminum Powder CoatedBlack Powder CoatedBrass Powder Coated
Bronze Powder Coated Satin Nickel Powder Coated
10GAFBCVRALU10GAFBCVRBK10GAFBCVRBRS
10GAFBCVRBRZ10GAFBCVRNK
10GAFBCVRALUC10GAFBCVRBKC10GAFBCVRBRSC
10GAFBCVRBRZC10GAFBCVRNKC
* Load applied through a 3 in. (76mm) mandrel in center of the cover.
10-Gang Floor Rectangular Boxes, Covers and Plates
Plate
Style
(1) Twist-Lock ® Opening
1.60 in. Dia. (Uses 2 Gangs)
(1) Simplex Opening
1.40 in. Dia. (Uses 2 Gangs)
(2) Twist-Lock ® Opening
1.60 in. Dia. (Uses 3 Gangs)
(2) Simplex Opening
1.40 in. Dia. (Uses 3 Gangs)
Cat. No. FB10TLA FB10TLX FB10TLB FB10TLY
Plate
Style
(3) Twist-Lock ® Opening
1.60 in. Dia. (Uses 5 Gangs)
(3) Simplex Opening
1.40 in. Dia. (Uses 5 Gangs)
(2) 2-Gang. Meets NEMA
Spacing. Ideal for Crestron®
DM –TX Product and Power
(4) Single Service Openings
Utilizing NEMA Wallplate
(Uses 5 Gangs)
Cat. No. FB10TLC FB10TLZ CFB10NEMA CFB10NEMA4G
Extron® is a registered trademark of Extron Electronics.Crestron® is a registered trademark of Crestron Electronics, Inc.FSR® is a registered trademark of FSR Inc.
TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
RAFB10 Series – Plates
Plate
Style
(1) Decorator
Opening
(1) Duplex
Opening Blank
Decorator Opening Plate
Including Hubbell ISF6GY
(2) Openings to Accommodate
(6) Ortronics TrackJack ®
Cat. No. FB10MPREC FBMPDUP FB10MPBNK FB10MPKEY FB10MPTRAC
Plate
Style
(2) Decorator
Openings
(4) Extron® MAAP
Modules
(4) Extron® AAP
Modules
For (6) 1U Hubbell
iStation Modules
Replacement Spacer
Around Wire-Way
Cat. No. FB10MP2A FB10MPMAAP FB10MPAAP FB10MP2B FB10MPX
-
8/18/2019 Hubbell System One -Cajas de Piso Nuevas de Hubbell
32/32
HUBBELL SystemOne
Delivery Systems eTour
This interactive, virtual tourof a city demonstrates where
and how Hubbell products
can be deployed in the oor,
through the oor, on the wall,
on the surface and from oor
to ceiling and demonstrates
solutions in these spaces.
Visit www.hubbell-wiring.com
to take the tour.
Customer and Technical
DrawingsCustomer and technical
drawings and installation
instructions can be downloaded
at www.hubbell-wiring.com.
BIM Models
Visit www.hubbell-wiring.comr seek.autodesk.com to
download all Hubbell Wiring
device BIM Models.
Online Resources
Available Literature
Hubbell offers an extensive
terature library for product
support. Downloadable
PDFs are available online.
Hubbell SystemOneSelector WheelHubbell SystemOneRecessed 4, 6 and 8-InchFire-Rated Poke-Throughs
Wiring Systems
®
www.hubbell-wiring.com
www.hubbell-premise.com