hresys li-ion battery energy storage system...bms bamu bcmu bmu1 2 bmun * hresys powerful...

10
Smart Energy Solutions for a Cleaner World HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM

Upload: others

Post on 12-Aug-2020

36 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM...BMS BAMU BCMU BMU1 2 BMUn * HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system. * BMU

Smart Energy Solutions for a Cleaner World

HRESYS LI-ION

BATTERY ENERGY

STORAGE SYSTEM

Page 2: HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM...BMS BAMU BCMU BMU1 2 BMUn * HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system. * BMU

HRESYS Containerized Battery Energy Storage System is designed based on high

performance Lithium Iron Phosphate (LFP) battery rack, and it has also integrated with HRESYS

Battery Management System, Thermal Management System, Alarming System, etc. It is

compatible to most of the Power Conversion System in the market, and it is also provided with

smart Energy Management System with remote monitoring for option.

Product

ESS Introduction

Solar & Wind farm Island

Microgrid Energy Storage System

Integrated System Solution with High Safety Batteries and High Reliability Management system

Energy Storage System – Container

High Safety, High Power Availability, Long Service Life, High Energy Density

Commercial &IndustrialPower Plant

Features of HRESYS

1ms

FAST RESPONSE

OK!

MAINTENANCELONGDURATION

6HOURS

COMPACTRELIABILITY &

SAFETY

Aeson Power ‖ Energy Storage System

Page 3: HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM...BMS BAMU BCMU BMU1 2 BMUn * HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system. * BMU

Copyright © Aeson Power Pty Ltd. All Rights Reserved.

Why HRESYS?HRESYS optimizes advanced LFP cell technology and battery system to ensure high safety and high energy density.

Multi-measures in structure design to ensurebattery cell’s safety, i.e.◼ Anti-explosion valve◼ Thermal Management◼ Fuse

Fuse

Anti-explosion Valve

Vibration Resistance Design

Cell – Ensured High Safety

Cell – Long Cycle Life

HRESYS ESS battery cell adoptedadvanced technical to ensure long life:

4600 cycles@100%DOD, 25℃

5200 cycles@90%DOD , 25℃

5800 cycles@80%DOD , 25℃

Model No. Capacity (Ah)@25℃ Nominal Voltage (V) Weight (kg)

VHR 3914895LFP - 50Ah 50 3.2 1.10

VHR 32173184LFP - 100Ah 100 3.2 2.30

VHR 45173184LFP - 150Ah 150 3.2 3.15

Aeson Power ‖ Energy Storage System

Page 4: HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM...BMS BAMU BCMU BMU1 2 BMUn * HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system. * BMU

Module

www.aesonpower.com .au

Modular Design and Flexible Product

Scalable pre-packaged modules to fully containerized solutions. The flexible design canaccommodate system sizes from hundreds of kilowatts to tens of megawatts.

Module Specification

MODULENominal

Battery Voltage (V)

Nominal

Capacity (Ah)

Dimension

[ W × D × H ] (±2mm)Weight (±2kg)

Recommended

Charge Current (A)

Recommended

Discharge Current (A)

Cycle Life(cycles)

@80%DOD

VHR CES25100LFP 25.6 100 482 × 465 × 220 33.9 20 20 ≥5000

VHR CES25150LFP 25.6 150 482 × 465 × 220 38.8 30 30 ≥5000

VHR CES25200LFP 25.6 200 482 × 465 × 220 54.6 40 40 ≥5000

VHR CES25300LFP 25.6 300 482 × 555 × 220 68.5 60 60 ≥5000

VHR CES28100LFP 28.8 100 482 × 465 × 220 34.7 20 20 ≥5000

VHR CES28150LFP 28.8 150 482 × 465 × 220 42.3 30 30 ≥5000

VHR CES28200LFP 28.8 200 482 × 465 × 220 59.8 40 40 ≥5000

VHR CES28300LFP 28.8 300 482 × 555 × 220 73.6 60 60 ≥5000

VHR CES32150LFP 32 150 482 × 465 × 220 45.2 30 30 ≥5000

VHR CES32200LFP 32 200 482 × 465 × 220 65.5 40 40 ≥5000

VHR CES32300LFP 32 300 482 × 555 × 220 80.2 60 60 ≥5000

VHR CES38100LFP 38.4 100 482 × 465× 220 44.5 20 20 ≥5000

VHR CES38150LFP 38.4 150 482 × 465 × 220 51.3 30 30 ≥5000

VHR CES38200LFP 38.4 200 482 × 555 × 232 70.3 40 40 ≥5000

VHR CES38300LFP 38.4 300 482 × 615 × 220 96.6 60 60 ≥5000

VHR CES48100LFP 48 100 482 × 465 × 220 52.4 20 20 ≥5000

VHR CES48150LFP 48 150 482 × 555 × 232 64.5 30 30 ≥5000

VHR CES48200LFP 48 200 482 × 615 × 220 97.5 40 40 ≥5000

Rack

Standard Cabinet Design, Compact Design

Case:

Module Rack Module Rack

VHR

ES32150LFPR154-M32150

VHR

ES38150LFPR052-M38150

Capacity Ah 150 150 150 150

Energy kWh 4.8 153.6 5.76 51.8

Operating Voltage V 26.7~36.0 427.2~576.0 32.0~43.2 288.4~388.8

VHR

ES38200LFPR100-M38200

VHR

ES38300LFPR104-M38300

Capacity Ah 200 200 300 300

Energy kWh 7.7 99.8 11.5 103.6

Operating Voltage V 32.0~43.2 416.5~561.6 32.0~43.2 288.4~388.8

Item

Model

Model

Module Rack Module Rack

VHR

CES28300LFPR207-M28300

VHR

ES32300LFPR211-M32300

Capacity Ah 300 300 300 300

Energy kWh 8.64 207.3 9.6 211.2

Operating Voltage V 24.0~32.4 576.7~777.6 26.7~36.0 587.4~792.0

VHR

ES32300LFPR220-M32300

VHR

ES38300LFPR230-M38300

Capacity Ah 300 300 300 300

Energy kWh 9.6 220.8 11.5 230.4

Operating Voltage V 26.7~36.0 614.1~828.0 32.0~43.2 640.0~864.0

Item

Model

Model

* Battery Rack can be customized according to project need.

Aeson Power ‖ Energy Storage System

Page 5: HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM...BMS BAMU BCMU BMU1 2 BMUn * HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system. * BMU

BMS

BAMU

BCMU

BMU1 BMU2 BMUn

* HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system.

* BMU – Battery Monitoring Unit

* BCMU – Battery Cluster Management Unit* BAMU – Battery Array Management Unit

Features & Functions:

◼ Battery working condition monitoring

◼ SOC estimation

◼ Cell balancing

◼ Thermal management

◼ Failure diagnose alarming

◼ Battery information monitoring

◼ Protection – over-charge/discharge,

short-circuit, reverse connection, over-

load, over-temperature, etc.

Aeson Power ‖ Energy Storage System

www.aesonpower.com .au

Page 6: HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM...BMS BAMU BCMU BMU1 2 BMUn * HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system. * BMU

Microgrid Energy Storage System

HRESYS battery system can provide essential functions

for smaller grids , such as microgrid, island grid, and

grids in remote locations. These functions includes

support for higher levels of renewables, time shifting

and stabilization of wind and solar, voltage support,

frequency regulation, protection against frequency

collapse during contingencies and backup power. With

HRESYS Microgrid Energy Storage System, the result is

a greener grid with lower operating costs and higher

reliability.

Maximize reliability

Function and Features

Product layout

Maximize renewable energy contribution

Energy independence

Energy & cost savings

Uninterrupted supply

Reduce environmental impact

PV Wind

Consumer

Utility gridEnergy Storage System

Battery inverter

Off-Grid On-Grid

Diesel

Aeson Power ‖ Energy Storage System

Copyright © Aeson Power Pty Ltd. All Rights Reserved.

Page 7: HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM...BMS BAMU BCMU BMU1 2 BMUn * HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system. * BMU

Product Solutions

System Specifications

1X: 345.6V/52KWh; 2X: 345.6V/104KWh; 3X: 499.2V/100KWh; 4X : 512V/154KWh; Solution

ENERGY STORAGE SYSTEM 10 20 30 40 50 30 50 100 120 150

1232KWh 4X 8P

924KWh 4X 6P

600KWh 3X 6P

624KWh 2X 6P

462KWh 4X 3P

300KWh 3X 3P

312KWh 2X 3P

308KWh 4X 2P

200KWh 3X 2P

208KWh 2X 2P

154KWh 4X 1P

100KWh 3X 1P

104KWh 2X 1P

104KWh 1X 2P

52KWh 1X 1P

UPS TYPE

THE POSSIBLE OUTPUT SOLUTIONS

SPO33 HPS

AC power rating10KVA/20KVA/30KVA/40KVA/50KVA/1

00KVA/120KVA/150KVA

AC output voltage 380/400/415±25%Vac/3-phase

Rectifier Frequency 50/60Hz

AC frequency 50/60±10%Hz(±5% optional)

Overload capacity125% load for 10 mins, 150% load for

1min

Peak efficiency >96%

DC voltage range 348Vdc@SPO;352~600Vdc@HPS

BASIC SPECIFICATIONS

Operation temperature 0~40℃

Cooling Forced-air cooling

Humidity 0-95%, non-condensing

Protection IP20/ IP54

ENVIRONMENTAL SPECIFICATIONS

BMS communication RS-485, dry contacts, can

Dispatching

communication

RS232/RS485(standard),Ethernet,GPRS(o

ptional)

COMMUNICATION INTERFACES

Aeson Power ‖ Energy Storage System

www.aesonpower.com .au

Page 8: HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM...BMS BAMU BCMU BMU1 2 BMUn * HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system. * BMU

Energy Storage Container

HRESYS Energy Storage Cabinets/Containers is amodular high-density solution that is built and tested toreduce project risk, shorten timelines and cutinstallation costs. The Battery Management Unitactively balances the safety, life and performance ofeach cell, extending battery life. The modular systemhas multiple installation and is configured to minimizeoperation and maintenance expenses over the life ofthe project with all weather capabilities and highefficiency cooling system.HRESYS Energy Storage Cabinets/Containers are mainlyapplied for electrical energy storage system, large scaleUPS system and other relevant applications.

Adopted high energy density prismatic cell

Standard design according to ISO…Scalability: easy to expand capacity

Easy installation by simple module structureEfficient and Intelligent Cooling Solution

High Accuracy BMS

Features

Product layout

①②③④⑤⑥

⑦ ⑧ ⑨

Battery Cluster

Fire Suppression System

Air Conditioner

PCS

On/Off Grid Cabinet

Ac Combiner Box

Air Conditioner

EMS

Access Control

Dc Combiner Box

Aeson Power ‖ Energy Storage System

Copyright © Aeson Power Pty Ltd. All Rights Reserved.

Page 9: HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM...BMS BAMU BCMU BMU1 2 BMUn * HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system. * BMU

Product Solutions

System Specifications

1X: 691.2V/207.3KWh; 2X: 704V/211.2KWh; 3X: 736V/220.8KWh; 4X : 768V/230.4KWh;

All in oneOnly battery

AC power rating50KW/1600KVA/250KW/500KW/1000KW/2

000KW

AC output voltage 380/400/415±25%Vac/3-phase

Rectifier Frequency 50/60Hz

AC frequency 50/60±10%Hz(±5% optional)

Overload capacity 110% load for long term operation

Peak efficiency >97%

DC voltage range200~600Vdc@50KW;500~900Vdc@Other

BASIC SPECIFICATIONS

Operation temperature 0~40℃

Cooling Forced-air cooling

Humidity 0-95%, non-condensing

Protection NEMA 3R/ IP54

ENVIRONMENTAL SPECIFICATIONS

BMS communication RS-485, dry contacts, can

Dispatching

communication

RS232/RS485(standard),Ethernet,GPRS

(optional)

COMMUNICATION INTERFACES

SYSTEM POWER 1

(only battery)100 250 500 1000 250 500 1000 1500 2000

2765KWh 4X 12P

2488KWh 1X 12P

2304KWh 4X 10P

2073KWh 1X 10P

2074KWh 4X 8P

1866KWh 1X 8P

1382KWh 4X 6P

1244KWh 1X 6P

922KWh 4X 4P

829KWh 1X 4P

Container Type

THE POSSIBLE OUTPUT SOLUTIONS

20GP 40HQ

Aeson Power ‖ Energy Storage System

www.aesonpower.com .au

Page 10: HRESYS LI-ION BATTERY ENERGY STORAGE SYSTEM...BMS BAMU BCMU BMU1 2 BMUn * HRESYS powerful user-friendly HMI for monitoring, control and visualization of energy storage system. * BMU

6. On-line Monitoring

STANDARDS COMPLIANCE

AESON POWER PTY LTD

+61 3 9545 5993

[email protected]

www.aesonpower.com.au

18/40 Ricketts Road, Mount Waverley 3149