h&r product catalogue - hobby takt ltd. · h&r group isoparaffins isoparaffins producing...

H&R Group

Our ProductsLiquid Paraffins

White Oils

Isoparaffins

Polydecenes

Vaselines

Paraffin Waxes

H&R Group

White oils

Liquid Paraffins Ph.Eur. / White Oils

Pharmaceutical / Medicinal Grades

All grades are odourless, colourless (colour ASTM < 0,5), tasteless and comply fully with purity re-quirements under DAB, CODEX, BP, USP and all other pharmacopoeias.

PIONIER® Liquid Paraffins are produced in many standard grades covering the viscosity range from 3.5 to 100 cSt/40°C (approx. 38 to 470 SUS/100°F).

Liquid Paraffins are used in the following industries:

Anti-dusting agent Animal feed, grain, wheat, etc, drug processingBasic oil Cosmetics, drugs, baby-, bath-, suntan-oil, hair-preparations, ointment-lotions, rayon-, textile-oilsCompressor lubricant PlasticsDefoamer Human food-products in contact with foodEvaporation control Food processing, pickles, vinegar, wineGlossing agent Drugs, pharmaceuticalsLubricant Food machineryLaxatives Animal medicationMoisture barrier Drugs, food productsMolding agent ConfectionaryProtective barrier Drugs, food productsProtective coating Fruit, vegetablesPigment dispersant PolyethyleneProcess aid PlasticsPlasticizer Hotmelt food coating, adhesive tapesPrimary plasticizer Ethyl cellulosePolishing agent ConfectionaryRelease agent BakingRust prevention Food machinery

These applications are only a few of a wide range of possibilities for the use of Liquid Paraffins.

Main Applications

H&R Group

White oils

Liquid Paraffins Ph.Eur. / White Oils

Pharmaceutical / Medicinal Grades

PIONIER® ColourASTM

SpecificGravity

DIN 51757

Flash PointCOC

DIN 51376

Pour Point

DIN 51597

Viscositymm²/s

DIN 51562

Structural GroupAnalysis

DIN 51378

DIN ISO 2049

ASTM D 1298

ASTM D92

ASTM D97

ASTM D445

ASTM D2140

at 15°C °C °C 40 °C CA% CN% CP%

4281 < 0,5 0,823 130 - 12 3,5 0 30 70

7028 P < 0,5 0,839 150 - 12 7,5 0 33 67

2076 P2076 N2079 P

< 0,5< 0,5< 0,5

0,8520,8600,857

182170190

- 12- 24- 10

16,016,020,0

000

354035

656065

6301 P6301 N7860

< 0,5< 0,5< 0,5

0,8590,8630,860

210200220

- 9- 25

- 9

30,032,040,0

000

354034

656066

2071 P2071 N11422070 P

< 0,5< 0,5< 0,5< 0,5

0,8670,8790,8880,866

266225220250

- 9- 24- 12

- 9

72,069,093,395,0

0000

33394233

67615867

1155 < 0,5 0,874 276 --- 170,0 - 3 32 71

Purity:

All grades correspond to: * Ph.Eur. (latest edition) * USP/NF * FDA 21 CFR 172.878 * 21 CFR 178.3620 (a)

Other viscosities or special grades on request

Subject to usual tolerances

H&R Group

White oils

White Oils

Technical Grades

PIONIER®Colour

ASTM

SpecificGravity

DIN 51757

Flash PointCOC

DIN 51376

Pour Point

DIN 51597

Viscositymm²/s

DIN 51562

Structural GroupAnalysis

DIN 51378

DIN ISO 2049

ASTM D1298

ASTM D92

ASTM D97

ASTM D445

ASTM D2140

at 15°C °C °C 40 °C CA% CN% CP%

7467 < 0,5 0,820 125 - 9 3,8 1 33 66

7321 < 0,5 0,851 140 - 25 8,5 1 37 62

7916 < 0,5 0,875 145 - 60 8,3 1 52 47

7878 < 0,5 0,880 170 - 55 15,0 2 48 50

2016 N < 0,5 0,865 170 - 25 16,5 1 40 59

2003 < 0,5 0,855 195 - 18 16,5 < 1 35 64

1618 < 0,5 0,870 220 - 15 70,0 < 1 34 65

Purity:

All grades correspond to: * FDA 21 CFR 178.3620 (b)



H&R Group

White oils

White Oils Technical - Isoparaffinic

FDA Grades

Description: White Oils Technical - isoparaf finic - PIONIER® are colourless, odourless, catalytically hydroi somerized and dewaxed base oils comprising hydrogenated highly isoparaffinic hydrocar bons.

Applications: White Oils Technical - isoparaffinic - PIONIER® are suitable for use in products with indirect “food contact”. Through their colour and UV- absorbance performance these products fulfil the requirements for technical white oils of FDA 21 CFR Ch (4-1 Edition 96); §178.3620 (b).

Data are subject to usual tolerances.

Test Method Unit PIONIER®

4298PIONIER®

4291PIONIER®

4290PIONIER®

4288

Colour sensitive colourless colourless colourless colourless

Colour ASTM DIN ISO 2049 < 0,5 < 0,5 < 0,5 < 0,5Odour sensitive odourless odourless odourless odourlessDensity at 15 °C ASTM D 4052 kg/m³ 820 834 839 844Viscosity at 40 °C ASTM D-445 mm²/s 7,5 13 35 49Viscosity at 100°C ASTM D-445 mm²/s 2,2 2,9 6,0 7,9Flash Point ASTM D-92 °C > 160 > 180 > 200 250Pour Point ASTM D-97 °C - 49 - 34 - 16 - 14Refractive Index ASTM D 1747 --- 1,4601 1,4646 1,4655PCA Content IP 346 wt. % < 3 < 3 < 3 < 3

UV AbsorbanceFDA 21 CFR Ch(4-1-96 ed.96 §178.3620 (b))

passes passes passes passes

Solubility- in water insoluble insoluble insoluble insoluble- in oil n.a. n.a. n.a. n.a.

Boiling Range Begin 760 Torr

ASTM D 86 °C 304 270 400 ---

Boiling Range End 760 Torr

ASTM D 86 °C 360 400 600 ---

CAS-Nr. 72623-86-0 72623-87-1 72623-87-1 72623-87-1EINECS-Nr. 276-737-9 276-737-9 276-737-9 276-737-9

Customs Tariff-No. 27.10.19.99 27.10.19.99 27.10.19.99 27.10.19.99

H&R Group

White oils

Dearomatized Hydrocarbons / Solvents

Dasol D 60, D 80, D 100

Description: Dearomatized solvent based on paraffinic hydrocarbons.

Properties: Transparent, odourless, very good solvency.

Applications: As solvent in coatings and varnishes. For the production of adhesives, aerosols, cleansing agents, detergents, for removing fats and cleaning metallic articles.

DASOL D60 DASOL D80 DASOL D100

Colour Hazen / Apha DIN ISO 6271 < 10,0 < 10,0 < 10,0

Density at 15°C kg/m³ DIN 51 757ASTM D 4052 817 816 820

Viscosity at 25°C mPa*s DIN 51 562 P.1ASTM D 445/446 1,47 2,1 3,15

Refractive Index at 20°C DIN 51 423ASTM D 1747 1,446 1,447 1,450

Boiling Range Begin °C DIN EN ISO 3405ASTM D 86 183 194 234

5 Volume % °C “ 189 201 240

10 Volume % °C “ 192 205 242

50 Volume % °C “ 202 215 245

90 Volume % °C “ 211 224 251

95 Volume % °C “ 213 226 253

Boling Range End °C “ 222 232 261

Pour Point °C DIN ISO 3016ASTM D 5985 < - 36 < - 36 < - 30

Flash Point PM °C DIN EN 22 719ASTM D 93 64 74 104

Aniline Point °C DIN ISO 2977ASTM D 611 64 68 78,4

Aromatics UOP 495-75 < 50 < 50 < 50

CA / CN / CP % DIN 51 378-KASTM D 2140 0 / 49 / 51 0 / 45 / 55 0 / 40 / 60

Evaporation Number Ether = 1 DIN 53 170 140 400 ---

Purity FDA 178.3620 a passes passes passes

Data are subject to usual tolerances.

H&R Group

Isoparaffins

Isoparaffins

Producing Industries:

Chemical industry Inert solvent on polymerizations, formulationsPharmaceutical industry Inert solvent , slip additivePhytopharmacy Carrier substance for fungicides, herbicides, insecticides, pesticidesCosmetic industry Carrier substance for care components, hygieneColour and varnish industry Solvent for organic pigments, polymers, film binding agent, blowing agent Specification: 3 different types quick-, medium- and slowdryingPaper industry Surface coating, wallpapers, currugated cardboard, napkins

Applying Industries:

Building industry Wood working industry Impregnating agent, dewaxing agentCeramics and glass industry Mould release agent, static inhibitor, foaming agent (PU)Metal industry Cleaning, degreasing, anticorrosive solventAutomobil industry Waxing and dewaxing agent, static inhibitorTextil and leather industry Surface cleaning agent, impregnating and care agentElectronic industry Surface cleaning agent, static inhibitorPrinting industry Detergent for rolls, printing-blanket cleanerHygiene industry Sanitary field: Solvent for additives Detergents, cleaning and care sector: Solvent for tensides

Iso-Paraffins are used in the following industries:

H&R Group

Isoparaffins

Isoparaffins

Data are subject to usual tolerances* provisional classification

PIONIER® 1137

PIONIER® 2094

PIONIER® 1145

PIONIER® 1139

PIONIER® 2093

Colour ASTM - DIN ISO 2049 < 0,5 < 0,5 < 0,5 < 0,5 < 0,5

Density 15°C kg/m³ DIN 51 757 P.4ASTM D 4052 759,5 781 790 808 837

Viscosity 20°C mm²/s DIN 51 562 P.1ASTM D 445/446 1,82 2,43 3,40 6,65 27,9

Viscosity 40°C mm²/s “ 1,4 1,69 2,21 3,81 12,1

Refractive Index - DIN 51 423 S.2ASTM D 1747 1,426 1,4337 1,4385 1,4471 1,4608

Anilin Point °C DIN ISO 2977 Vers.1ASMT D 611 81 82,8 86,6 92,2 102,2

Aromatics UOP mg/kg UOP 495-75 2 23 4 38 140

Flash Point PM ° C DIN EN 22 719ASTM D 93 64 86 101 125 167

Pour Point DIN ISO 3016ASTM D 97 -70 < -57 < -57 < -45 < -36

Evaporation Rate Ether = 1 DIN 53 170 150 > 500 > 500 > 500 > 500

Sulphuric Acid Test Ph.Eur. passes passes passes passes passes

Carbon Chain Length

% GC C10 - C13 C10 - C14 C13 – C16 C13 - C19 C17

Boiling Range Begin °C DIN EN ISO 3405ASTM D 86 185 210 231 262 308

Boiling Range End °C “ 210 235 262 303 393

CAS-Number (*) 64741-73-7 64741-73-7 64741-73-7 64741-73-7 64741-73-7

Customs Tariff-No. 27.10.11.21 27.10.19.41 27.10.19.41 27.10.19.41 27.10.19.41

Stand: 07.08.2006

H&R Group

Polydecenes

Polydecene

PIONIER® 0030 SYN FG

1. Description

PIONIER® 0030 SYN FG is a mixture of iso-paraffins which are produced synthetically. This product is pure, inert, colourless and odourless. It was authorized under the denomination “Hydroge-nated poly-1-decene” as a food additive according to the Directive 2004/457/EC. This means a real alternative to the medicinal and vegetable oils in the foodstuffs industry. Also the pharma-ceutical and cosmetic industries can profit of the versatile characteristics of this oil. Compared to vegetable oils which oxidize very quick becoming rancid and viscous,PIONIER® 0030 SYN FG is thermal- and UV-stable.

2. Chemical Denomination

1-Decen, Homopolymer, hydrogenated orHydrogenated Poly-1-decen.

3. Production

Basic material is usually the synthetic gas ethane which is polymerized up to by passing the in-termediate stage of the Alpha-Decene. Contrary to mineral oil this production procedure results in a highly pure and in its composition exactly defined chemical compound of isoparaffins with carbon-chain lengths of C20, C30, C40, C50 and C60. Afterwards the mixture is distillated and hydrogenated twice. Due to its chemical connection with mineral oils the purity of this product can be reviewed in accordance with the monography “Paraffinum liquidum” Ph.Eur. The test results are excellent in particular the behaviour against sulphuric acid.

4. Product Declaration

CTFA-Trade name: Polydecene / PIONIER® 0030 SYN FG (CTFA File Number: 1943)INCI-Name: Hydrogenated polydeceneCAS-Nr.: 68037-01-4EINECS-Nr.: No longer polymer list 500-183-1JAPAN: Alpha-Olefin Oligomer no. 502029 (Sho-Gai-Ki, all categories)E-No.: 907

H&R Group

Polydecenes

Parameters Typical values Unit Method

Viscosity / 20 °CViscosity / 40 °CViscosity 100 °C

60 - 8529 - 34

5,5 - 6,2mm2/s DIN 51 562

Density / 20 °C 807 - 837 kg / m3 DIN 51 757

Refractive index / 20 °C 1,455 - 1,463 DIN 51 423

Pour Point < - 40 ° C DIN ISO 3016

Flash Point min. 200 ° C DIN ISO 2592

Colour Hazen / Apha 5,0 DIN ISO 6271

Purity of Paraffinum Liquidum passes Ph. Eur. III

5. Approval from the Food Industry

The Food Additive Regulation regulates the require-ments for additives, which are added to foodstuffs for technological purposes. Hydrogenated polydecene was included in the annex 2.

The purity criteria for E 907 “Hydrogenated Poly-1-decene” were published in the Directive 2004/45/EC.

The Food Additive Approval Regulation regulates the use of this product as coating agent (Part B, Pt. kk E 907) for confections, dried fruits and nuts with a limit of 2 g/kg.

6. Analytical Values

Polydecene


H&R Group

Polydecenes

7. Toxicity and Ecotoxicity

7.1. Acute toxicity

Oral Administration: A 14/28 day oral administration did not give any signs of toxic effects.

7.2. Subchronic toxicity

Polydecene PIONIER® 0030 SYN FG proved to be non- toxic. (Mecon 96, 3 month Oral Toxicity Study, No.: 20-04-0154/00-96). Polydecene food grade proved to be non-toxic on rats even when admin-istered in very high concentrations in the food (90 day oral administration in dietary concentrations of up to 5 %). Under the microscope no treatment related effects were found and no evidence of hepatotoxicity or deposition in lymphoid tissue or liver. This is a remarkable contrast to findings of white oils where 2 % added to food caused significant changes in the liver and lymphatic glands. Deposition of mineral oil in a grain-like form is characteristic. There was also a proof for a damage of the liver (Baldwin et al. 1992, Toxicologic Pathalogy 20; 426.435)

7.3. Eye irritation

Instillation of hydrogenated polyalphaolefin in rabbits eyes did not produce any corneal opacity, nor congestion, swelling or discharge of iris or conjunctivae when observed at 1, 24, 48 or 72 hours postinstillation regardless of whether the eyes were flushed with water after instillation of the test agent.

7.4. Inhalation

As for all oils, inhalation of oil mist is toxic and harmul for the lungs.

7.5. Skin irritation (rabbits)

No erythema, edema or necrosis was observed in any of the rabbits upon examination immedi-ately following a 4, 24, 48, and 72h dermal contact with the hydrogenated polyalphaolefin.

7.6. Skin sensitization

25 % of hydrogenated polyalphaolefin in white mineral oil did not produce any erythema or edema after a test containing 10 days of sensitization dosing, two weeks of rest following chal-lenge treatment. The hydrogenated polyalphaolefin is classified as non-sensitizer. A test with 75 % of PIONIER® 0030 SYN FG in PEG 400 covering an observation time of 24 and 48 h respectively did not produce any irritation. This concentration of PIONIER® 0030 SYN FG is classified as non sensitizer (RCC, OECD Number 406 ‚‘Skin Sensitization‘‘ Project 669622).

Polydecene


H&R Group

Polydecenes

7.7. Microbiology

Total counts of germs: < 1 / gGrowth in the concentration specimen: none

7.8. Ecotoxicity

PAO‘s and polydecene have been tested for fish (rainbow trout), algae (Selenastum Capricomu-tum), and daphnia (Daphnia Magna).

Algae: EL 50 / 72 h = > 1000 mg / lDaphnia: EL 50 / 48 h = > 1000 mg / lFish: LI 50 / 96 h = > 1000 mg / l

8. Comparison of the ADI values with mineral oils

The SCF Commission (Scientific Committee for Food) in its function as advisory board of the European Commission for Food Additives has effected extensive evaluations of the toxicologic surveys published by the CONCAWE.

The SCF Commission (Scientific Committee for Food) in its function as advisory board of the European Commission for Food Additives has effected extensive evaluations of the toxicologic surveys published by the CONCAWE.

The intention of these evaluations is the determination of an ADI-value (Acceptable or tolerable Daily Intake), which is specified in mg/kg / body weight. This value multiplied by the average body weight (60 kg) results in the SML-value (Specific Migration Limit), a number which defines the maximal allowed migration mass of a substance in foods.

Also the JECFA (Expert Committee on Food Additives), an organization of the Joint FAO (Food and Agriculture Organization of the United Nation) and the WHO (World Health Organization) publish ADI-values.

A comparison of the ADI-values published by the mentioned boards says that PIONIER 0030 SYN FG, with an ADI-value of 0-6 mg/kg / body weight, is comparable with high-viscous medicinal white oils based on mineral oil. Such oils show ADI-values of 0-10 mg/kg / body weight (JECFA) or 0-4 mg/kg / body weight (SCF). Extra liquid mineral oils show even lower ADI values in compari-son with PIONIER® 0030 SYN FG.

Considering that high viscous medicinal white oils were recommended by the IKW for lip care products due to the ADI-values, it argues for the substitution of this substance by the well-compat-ible PIONIER® 0030 SYN FG.

Polydecene


H&R Group

Polydecenes

In the same way the SCF Commission recommended high viscous medicinal white oils for the use as auxiliary material for the production of plastic packaging for foods (EG-Directive 90/128/EWG PM/Ref. 95883), due to their ADI-values of 0-4 mg/kg / body weight.

For this reason PIONIER® 0030 SYN FG is qualified with its ADI-value of 0-6 mg/kg / body weight as recommendable substitute for this application area.

Herewith the updated ADI-values for medicinal white oils:

JECFA of 4-13 June 2002ADI 0-10 mg/kg (NOEL 1200 mg/kg/day) for medicinal white oils Class I with following specification:

Viscosity 8,5 – 11 mm²/s at 100 °CC-Number after 5% distil off > 25 after 5% distil offBoiling Point after 5% distil off > 391 °CMolecular Weight 480 - 500

JECFA of 4-13 June 2002ADI 0-0,1 mg/kg until 2006 for medicinal white oils Class II with following specification:

Viscosity 7,0 - 8,5 mm²/s at 100 °CC-Number after 5% distil off > 22 after 5% distil offBoiling Point after 5% distil off > 356 °CMolecular Weight 400 - 480

JECFA of 4-13 June 2002ADI 0-0,1 mg/kg until 2006 for medicinal white oils Class III with following specification:

Viscosity 3,0 – 7,0 mm²/s at 100 °CC-Number after 5% distil off > 17 after 5% distil offBoiling Point after 5% distil off > 287 °CMolecular Weight 300 - 400

SCFADI 4 mg/kg for medicinal white oils with following specification:

Viscosity > 8,5 mm²/s at 100 °CC-Number after 5% distil off > 25 after 5% distil offMolecular Weight > 480


Polydecene

H&R Group

Polydecenes

PIONIER® 0030 SYN FG PIONIER® 6301 S CN 401st day, volume, mm³ 9,52 8,3729th day, volume, mm³ 7,65 8,01Wrinkle reduction, volume, mm³ 1,87 0,35Wrinkle reduction % 19,6 % 4,2 %

9. Cosmetic Recommendations

PIONIER® 0030 SYN FG is moisturizing, not occlusive and harmless from the toxicological and allergological point of view. Topical administered polydecenes are reabsorbed quickly, remaining in the horny layer. They could not be proved in epidermis or corium. The skin does not become fatty, however pleasantly smooth with a silky, fresh feeling. Therefore the oil is optimally suitable as super-fatting and glossing agent. Also excellent is the compatibility with a wide spectrum of cosmetic components, such as emulsifiers, pigments, antioxidants, thickeners, UV-filters and other active agents. The product is suited for sun care products, creams, cleaning and care lotions, lipsticks, baby and massage oils, etc.

10. Anti-Wrinkle Test, proDerm Survey

Test conditions: 10 women with an average age of 43,2 tested PIONIER® 0030 SYN FG simultaneously with PIONIER® 6301 CN 40 (a white medicinal oil of the same viscosity class) during 29 days. The depth of the wrinkles was measured with a 3D-PRIMOS equipment.

The following results were detected:

Conclusion: PIONIER® 0030 SYN FG causes a noticeable reduction of the wrinkle depth in comparison to medicinal oil.

11. Ecological Information

Biological degradability: PAO‘s/Polydecene show a better biodegradability than conventional mineral oils.

WGK: 1

Biological accumulation: There are no suspicious facts of a bioaccumulation of PAO‘s / Polydecene in aquatic communities.

Polydecene


H&R Group

Polydecenes

12. Pollution

Heavy metal: As-, Cd-, Sb-, Hg-, Pb-, Ni- content: < 1 ppm DIN 396 TIPCA‘s: The PCA‘s value reads < 10 ppbOther harmful substances: under detection limit / n.a.Pesticides: n.a.

13. Delivery Form

Liquid product, bulk in road tankers or packed in containers with 25-850 kg.

Polydecene


H&R Group

Vaselines

Main Applications

Softeners, lubricants, preservatives, isolating compounds, release agents, glossing agents, plasti-cizers, anti-corrosion agents, sealing compounds, carrier for pigments, etc.

It is used in the following main industries:

* Drug and pharmaceutical* Cosmetics* Food processing and handling* Carbon paper* Plastics / rubber* Tobacco* Confectionary* Paper* Rope* Veterinary

Petroleum Jelly / Vaseline

White and Yellow Pharmaceutical Grades

H&R Group

Vaselines



Petroleum Jelly / Vaseline

White and Yellow

PIONIER® Pharmacopoeia Congealing Point

ASTM D 938

Dropping Point

ASTM D 3954

Colour Lovibond2” CellIP 17

Cone Penetration

ASTM D 937

Viscosity at 100 °C

ASTM D 445

°C °C 25 °C-mm/10 mm²/s

8693 CODEX/Ph.Eur.BP/USP

53 58 0,5 white 185 5,4

17004CODEX/Ph.Eur.

BP/USP53 60 < 1,0 white 155 7,1

5741 Ph.Eur./BP/USP 54 62 0,7 white 180 8,8





17146 Ph.Eur./BP/USP 52 555,2

light yellow160 5,8

5370 Ph.Eur./BP/USP 52 59 25 yellow 170 6,8

5353 Ph.Eur./BP/USP 51 5922

yellow164 7,0

5671 technical 54 62 yellow brown 185 7,5

H&R Group

Paraffin waxes

Paraffin, refined Congealing Point Oil Content Needle Penetrationat 25 °C

Viscosityat 100 °C

DIN ISO 2207 DIN ISO 2908 DIN 51 579 DIN 51 562°C % 1/10 mm mm²/s

Fully Refined Paraffin WaxesH&R WAX 50/52 DAB 51 0,4 18 3,2H&R WAX 52/54 DAB 53 0,4 18 3,5H&R WAX 54/56 DAB 55 0,4 18 3,9H&R WAX 56/58 57 0,4 18 4,2H&R WAX 58/60 DAB 59 0,5 18 4,5H&R WAX 58/60 D DAB 58 0,4 14 4,2H&R WAX 60/62 STD DAB 61 0,5 18 4,9H&R WAX 60/62 321 DAB 61 0,4 15 4,7H&R WAX 62/64 P 476 63 0,7 20 5,9H&R WAX 64/66 66 0,5 19 6,2

Drawing ParaffinsH&R WAX 54/56 P 472 55 0,7 22 4,2H&R WAX 56/58 P 527 DAB 57 0,5 18 4,0

SpecialtiesH&R WAX 45/47 46 0,7 45 2,7H&R WAX 48/50 49 0,5 25 3,1

H&R WAX 48/50 405 DAB 49 1,3 50 3,1H&R WAX 50/52 405 DAB 51 1,3 50 3,4H&R WAX 52/54 405 DAB 53 1,0 45 3,6

H&R WAX 44/48 Z 46 2,0 50 3,0H&R WAX 48/50 Z 50 1,3 50 3,2H&R WAX 50/52 Z 51 0,3 40 3,2H&R WAX 52/54 Z 53 1,3 40 3,9

H&R WAX P 144 42 1,0 60 2,45H&R Gepafin 6062 66 1,0 22 7,4H&R Ersolit 336 G 70 2,8 50 11,2H&R WAX P 72 2,5 50 17,0H&R Wicrofin 74 72 1,0 20 10,6

MicrowaxesH&R Micro 75 76 1,2 21 18H&R Micro SLV 73 2,0 25 15H&R Micro S 2530 74,5 1,2 27 18

Data are subject to usual tolerance (mm²/s = cSt)

Paraffin Waxes

Pharmaceutical-Cosmetic / Technical

H&R Group

Hansen & Rosenthal KGKlaus Dahleke KGTudapetrol KGH&R WAX Company Vertrieb GmbHH&R Vertrieb GmbH

Am Sandtorkai 64D-20457 Hamburg, GERMANY

Tel. +49 (40) 432 18-0Fax +49 (40) 432 [email protected]

H&R ChemPharm GmbHNeuenkirchenerstr. 8D-48499 Hamburg, GERMANY

H&R Ölwerke Schindler GmbHNeuhöfer Brückenstr. 127-152D-21107 Hamburg, GERMANY

H&R ChemPharm (UK) Ltd.Dudley RoadTipton, West Midlands DY4 8EHGREAT BRITAIN

Tel +44 (121) 522 01 00Fax +44 (121) 522 01 [email protected]

H&R Benelux B.V.Thermiekstraat 2NL-6361 HB Nuth, NETHERLANDS

Tel +31 (546) 492 560Fax +49 (40) 432 [email protected]

H&R GSP Pty Ltd144- 152 Fitzgerald RoadLaverton NorthVictoria 3026 AustraliaP. O. Box 432, LavertonVictoria 3028 AUSTRALIA

Tel +61 (3) 9368 0088Fax +61 (3) 9369 6070

Dayang (Ningbo) Co. Ltd.#18, 6 Chuangye RoadFree-Trade West Zone315800 Ningbo, Zhejiang, CHINA


H&R GSP Co. (HK) Ltd.Guangzhou Repr. OfficeSuite 433, Parkview Square906 Jie Fang Bei RoadGuangzhou 510040 CHINA


H&R GSP Co. (HK) Ltd.2/F., Shui On Centre6-8 Harbour RoadWanchai, HONG KONG

Tel +852 2824 8992Fax +852 2824 [email protected]

H&R GSP Sdn. Bhd.Lot 6579, Jalan Parang, North PortLocked Bag No. 203, North Port42000 Port Klang, Selangor, MALAYSIA


H&R GSP Pty (New Zealand Branch) Ltd.Building 2, Suite B, Unit 2b, 5 Ceres CourtMairangi BayAucklang, NEW ZEALAND

Tel +64 (9) 919 2402Fax +64 (9) 919 2404

H&R GSP Sales (Pty) Ltd.113 Trinidad RoadIsland ViewBluff 4052 SOUTH AFRICA

Tel +27 (31) 466 87 00Fax +27 (31) 466 87 16/[email protected]

H&R GSP Co. Ltd. (Thailand)B1/F5 Bangkok City Tower179 South Sathorn RoadTungmahamek, SathornBangkok 10120, THAILAND

Tel +66 (2) 359 90 03Fax +66 (2) 287 13 [email protected]

H&R Group4800 South Ulster Street80237-2882 Denver, COUSA


H&R Group

Imprint: Hansen & Rosenthal KG undertakes to do their utmost to ensure that the information provided on this documenta-tion is free of errors. However, Hansen & Rosenthal KG cannot accept any liability nor can they guarantee that the informa-tion provided is up-to-date, accurate or complete.

Hansen & Rosenthal KG reserves the right to make amendments or additions to the information provided without notice. The content of this documentation is protected by copyright. Storage and reproduction of photographic material or graphics from this documentation is prohibited on copyright grounds.

Hansen & Rosenthal KG is not liable for any direct or indirect damage sustained as a result of or otherwise in association with information provided on this documentation.

Last actualization: 25.08.2006 / ia

H&R GroupAm Sandtorkai 64D-20457 HamburgGermany

Tel. +49 (40) 432 18-0Fax +49 (40) 432 18-400

E-Mail [email protected] www.hansen-rosenthal.com

h&r product catalogue - hobby takt ltd. · h&r group isoparaffins isoparaffins producing...

Documents