hp2-t16 exam preparation customized test exam in excel

QUESTION NO: 1What is provided by the serial port hardware interface for managing network devices?A. scalabilityB. ability to offload functions from the hostC. well-defined communications standardsD. caching and advanced functionsB

QUESTION NO: 2Which statement is true about the installation of DIMM memory modules?A. A bank of DIMMs cannot contain DIMMs of mixed size and speed.B. DIMMs with gold pins can be used on system boards with gold planet and tin plated contacts.C. DIMMs with 144 pins provide error checking and correcting capabilities.D. Performance defaults to the highest DIMM speed.A

QUESTION NO: 3Which statement is true about PCI Express architecture?A. Data is sent serially.B. PCI Express utilizes more pins than PCI-X.C. PCI Express transfers data in half-duplex.D. Data is sent inparalell.A

QUESTION NO: 4Your server is running Windows 2003 and you are experiencing network performance issues.What can you do to determine if the bottleneck is the network card?A. Replace the NVRAM on the network card.B. If the server contains multiple network cards, remove all but one card.C. Run the system monitor applet to monitor the network throughput.D. Add NVRAM to the network card.C

QUESTION NO: 5How many address lines does an Intel Xeon processor use, and what is the maximum amount ofaccessible, addressable memory?A. 32 address lines; 64GB addressable memoryB. 36 address lines; 4GB addressable memoryC. 36 address lines; 64GB addressable memoryD. 64 address lines; 64GB addressable memoryC

QUESTION NO: 6What must you check prior to adding another processor to an existing system. (Select three)A. amount of memory in the systemB. compatibility of the new process with existing processorsC. firmware requirements for the new processorD. number of users currently logged into the system

E. number of processors the operating system supportsF. weight of the new processorBCE

QUESTION NO: 7Which events could require a firmware update? (Select two)A. downgrading memoryB. re-installing the operating systemC. adding support for larger, faster drivesD. adding virtual machines to a serverE. removing an existing processorF. adding plug and play supportCF

QUESTION NO: 8Which statements are true about active and passive cooling systems? (Select two)A. A passive cooling system uses only heat sinks.B. An active cooling system uses only heat sinks.C. An active cooling system adds devices such as fans.D. A passive cooling system adds devices such as fans.AC

QUESTION NO: 9In systems with AMD processors, what allows communication between processors and the I/Osubsystem?A. NorthbridgeB. SouthbridgeC. HyperTransport linkD. APICE. QuickPath InterconnectC

QUESTION NO: 10Which transfer rate does USB 2.0 support?A. 32Mb/sB. 64Mb/sC. 64Mb/s to 120Mb/sD. 120Mb/s to 240Mb/sD

QUESTION NO: 11Which server provides resolution from the hostname to the IP address?A. FTPB. PXEC. DNSD. DHCPC

QUESTION NO: 12What are characteristics of a virtual machine instance? (Select three)A. virtual applicationB. virtual storage controllerC. virtual processorD. virtual operating systemE. virtual driveBCE

QUESTION NO: 13Which address range of the first octet is assigned to a TCP/IP class C network?A. 1-64B. 64-126C. 128-191D. 192-223D

QUESTION NO: 14Which management protocol can notify you when a fan fails in your server?A. SMTPB. DHCPC. TFTPD. IPMID

QUESTION NO: 15Which protocols are support in FC-SAN? (Select three)A. ArbitratedLoopB. EthernetC. Switched FabricD. Point to PointE. CSMA/CDF. Token RingACD

QUESTION NO: 16Which action do you perform after installing the Network Operating System (NOS)?A. Configure the boot order.B. Ensure that the latest drivers are installed.C. Format the hard disk drive.D. Configure hardware RAID.B

QUESTION NO: 17Which switch port type is required to support FC-AL devices in a SAN?A. U_PortB. E_PortC. FL_Port

D. NL_PortD

QUESTION NO: 18What is the software abstraction layer instance commonly called?A. guestB. partitionC. hypervisorD. mirrorC

QUESTION NO: 19What contributes to the use of virtualization?A. the need to conserve space in data centersB. an abundance ofoverutilized hardwareC. decreasing IT agilityD. the need for more system administratorsA

QUESTION NO: 20Into what range do reserved TCP/IP server ports generally fall?A. 0-1023B. 1-512C. 21-80D. 1024-8080A

QUESTION NO: 21You want to create a RAID set with 8 disks. Which RAID technology incurs a 50% capacitypenalty?A. RAID 0B. RAID 1C. RAID 5D. RAID 6B

QUESTION NO: 22What are two types of backbone SAN topologies? (Select two)A. fat treeB. meshedC. skinny treeD. cascadedE. ringAC

QUESTION NO: 23Which statement is true about a JBOD?A. It is configured as a RAID 0 by default.

B. It contains aminumum of one hot spare disk.C. It offers no data redundancy or stripingD. It is connected to a minimum of two hosts by default.C

QUESTION NO: 24Your customer wants to guard against the simultaneous loss of any two disk drives in his RAIDarray. Which RAID level can be used to accomplish this?A. RAID 1B. RAID 3C. RAID 5D. RAID 6D

QUESTION NO: 26You are integrating a RAID array for mixed read/write applications. What should you do withstriping to achieve optimal performance?A. Accept the default stripe size.B. Disable striping.C. Increase the stripe size.D. Decrease the strip size.A

QUESTION NO: 27Which RAID level offers disk mirroring and data striping without parity?A. RAID 1+0B. RAID 5+0C. RAID 6+0D. RAID ADGA

QUESTION NO: 28Your RAID 5 array on a Smart Array sustains a drive failure. A hot spare replaces the failed driveand rebuilds successfully. After replacing the failed drive with a new drive, what happens next?A. The spare drive replicates its data to the new drive and both work as a mirror until you evict thespare drive.B. The new drive stays offline until you assign it to the array, at which point it automatically takesthe place of the spare drive.C. The new drive re-assumes its place in the RAID set and after data rebuild is complete, the drivethat was the spare once again becomes the hot spare drive.D. The new drive becomes a spare drive and you must go to the ACU to remove the old spacedrive and then re-add the new drive to the array.C

QUESTION NO: 29Which statements are correct about mixing drives with different sizes and speeds within an array?(Select two)A. Performance may be degraded.

B. Performance of the fastest disk is provided.C. Capacity is wasted.D. There is no impact on the capacity usage of each disk.E. Usage of hot spare disks is not necessary.AC

QUESTION NO: 30Which statements are true about out-of-band network management? (Select three)A. TELNET or SSH protocols are used to manage the devices.B. TCP/IP and SMTP protocols are used to manage the devices.C. Aseperate network is maintanced for management access and control data.D. Control and management data share the same network as the data being processed.E. Network ports are not used for device management.ACE

QUESTION NO: 31What is the most commonly used measurement unit for describing a UPS?A. kWB. VAC. AmpsD. kJB

QUESTION NO: 32Which material should be used for cleaning the ends of fibre optic cables?A. waterB. carbon dioxideC. polyester clothD. gravelC

QUESTION NO: 33What can you use to access the server console remotely when an operating system is notrunning? (Select two)A. KVM switch with IP remote accessB. MS Terminal ServicesC. TelnetD. serveremdedded remote management cardE. pcAnywhere solutionAD

QUESTION NO: 34Which categories of questions should you ask the customer during needs analysis? (Select two)A. facility sizeB. company locationC. future plansD. business requirementsCD

QUESTION NO: 35Which network management protocols are typically supported by system monitoring agents?(Select two)A. Internet Message Access Protocol (IMAP)B. Server Message Block (SMB)C. Secure Sock Layer (SSL)D. Intelligent Platform Management Interface (IPMI)E. Web-based Enterprise Management (WBEM)DE

QUESTION NO: 36What is the easiest solution for a company to implement in order to defend data from beingcompromised if a physical hard disk is stolen?A. a strong password policy for data sharesB. TPM (Trusted Platform Module) in conjunction with encryption softwareC. Integrated Encryption System, enabled on disk arrays located in data centersD. RAID 6 volumes used to protect againstolent dataB

QUESTION NO: 38What is considered a best practice for a data center?A. leaving KVM stations unlocked for ease ofadministratonB. labeling both ends of cables for easy or identificationsC. unplugging redundant power supplies to conserve powerD. storing all administrative passwords on a sheet in the locked data centerB

QUESTION NO: 39What are recommended procedures to ensure backup media is securely stored? (Select two)A. Place the backup media in a fire-proof safe.B. Ensure the switch on backup tapes is set to lock.C. Store a copy of all backup media in a locked server rack.D. Have a bonded third-party firm store backup media at a secure remote facilityE. Take a copy of all backup media home.AD

QUESTION NO: 40In the GFS backup tape rotation plan, which type of backup is the Grandfather?A. copyB. normalC. differentialD. incrementalB

QUESTION NO: 41What happens during an incremental backup? (Select two)A. The archive bit is set to 1.

B. The archive bit is left aloneC. The archive bit is reset to 0.D. The transaction log is cleared.E. The transaction log is left alone.CD

QUESTION NO: 42Which backup operations clear the archive bit after the file has been backed up? (Select two)A. copyB. normalC. differentialD. incrementalBD

QUESTION NO: 43What happens during a differential backup? (Select two)A. The archive bit is set to 1B. The archive bit is left aloneC. The archive bit is reset to 0.D. The transaction log is cleared.E. The transaction log is left alone.BE

QUESTION NO: 44What should a successful Disaster Recovery Plan contain? (Selecte three)A. offsite media storage locationB. regularbakcup rotationC. provenrestore processD. cost-effective tape formatsE. change management proceduresF. effective performance alternativesABC

QUESTION NO: 45Which information is required for the implementation of a successful backup strategy? (Select two)A. passwords for domain usersB. backup methodC. passwords for application filesD. data to be backed upE. number of users using the systemBD

QUESTION NO: 46In the GFS backup tape rotation plan, how often is the Son backup performed?A. dailyB. weeklyC. monthlyD. quarterly

A

QUESTION NO: 47You notice that your server has a high amount of unexpected disk activity. You suspsect that adisk subsystem bottleneck exists. Which other subsystem could be causing the problem?A. memoryB. graphicsC. networkD. processorA

QUESTION NO: 48You are asked to update the firmware of the backplane of an external disk enclosure to the latestversions. The disk enclosure is connected to a RAID adapter on your server. You have updatedthe firmware successfully and rebooted to complete the setup. The disk enclosure does not startafter rebooting. What can be done to resolve the problem? (Select three)A. Roll back to the old firmware revision.B. Ensure that the disk enclosure is connected to a working AC source.C. Ensure that the power source and power supplies are working properly.D. Replace the disk enclosure.E. Remove the AC power cords from both enclosure power supplies and reinsert them.ADE

QUESTION NO: 49A customer has a single-threaded application running on a dual-core base ProLiant server.Processor utilization is consistently between 80 - 100%. Which step should you take to reducesystem load on the processors?A. Replace with slower quad-core processors.B. Replace with faster single core processors.C. Change the application to use a single thread.D. Add more memory.B

QUESTION NO: 50A customer complains about server performance. Performance parameters show the following:Network Segment: % Network Utilization - 55%Page/Sec - 3% Processor Time - 65%% Disk Time - 75%A. diskB. memoryC. networkD. processorA

QUESTION NO: 51Which tool does Windows provide to monitor and trend system performance?HP HP2-T16: Practice Exam

Pass Any Exam. Any Time. - 100% Guaranteed 25A. Component ServiceB. Windows AnalyzerC. Service ManagerD. System MonitorD

QUESTION NO: 52Which are Linux resource monitoring tools? (Select three)A. freeB. monitorC. perfmonD. vmstatE. topF. vtuneADE

QUESTION NO: 53Which Linux tool measures system activity information and provideds statistics over a specifiedperiod of time?A. iostatB. netstatC. sarD. topC

QUESTION NO: 54Which Linux utility helps you obtain information about I/O and processor statistics?A. iostatB. ioutilC. vmstatD. cpuinfoA

QUESTION NO: 55All the RAID sets in a server system are no longer accessible. Which step should be taken first totroubleshoot this problem?A. Replace the array controller.B. Pull all the disksexcept one in orer to get a lease on working.C. Start the system with the OS installation CD to repartition the hard drives.D. Use the array controller diagnostics utility to verify the array status.D

QUESTION NO: 56After some analysis, you determine that more memory is needed to address a system bottleneck.How do you increase the memory and ensure the additional resources are effective to meet theneed?A. Add the memory and monitor perform counter %Usage Peak to verify that it is < 75%

B. Add the memory and increase the amount of the Paging File to equal the total amount ofmemory installed plus 10%C. Establish a baseline performance report, install the new memory, create a new baseline reportand compare it against expectations and the first baseline.D. Run Task Manager to check the amount of physical memory available, add the new memoryand confirm the addition by running Task Manager again to show the new resources.C

QUESTION NO: 57A customer complains about server performance. Performance parameters show the followinginformation:Network Segment: % Network Utilization - 55%Page/Sec - 7% Processor Time - 55%% Disk Time - 35%A. diskB. networkC. memoryD. processorC

QUESTION NO: 58You added memory to a 4-socket AMD Operton-based server. The new memory does not show inPOST and the operating system does not see it. You verified that the memory is correct for thisserver model. Why is the memory not being used?A. SystemMaintanance Switch DIP SW2 is set to ON and the Configuration Lock is enabled.B. You exceeded the server's maximum memory capacity.C. The memory was added to a bank with no process in the adjoining socket.D. There is a memory size mismatch on DR2 and AMDHyperTransport bus.C

QUESTION NO: 59Which log contains information about the SUSE Linux startup?A. /var/log/boot.logB. /var/log/boot.msgC. /boot/log/boot.logD. /var/opt/log/message.logA

QUESTION NO: 60Which Linux utility allows you to configure a NIC card?A. netstatB. ifconfigC. sarD. ipconfigB

QUESTION NO: 61

How does single-mode fiber compare with multimode fiber?A. Single mode fiber has a higher bandwidth and lower loss.B. Multimode fiber has a higher bandwidth and lower loss.C. Multimode fiber is more often used for long-distance telecommunications.D. Single-mode fiber has higher loss and lower bandwidth.A

QUESTION NO: 62Which are recommended procedures when handling memory modules? (Select three.)A. Wear antistatic device wrist strap for Electrostatic Discharge.B. Hold the DIMM modules by the metallic pins only.C. Discharge static from each DIMM before replacing the module.D. Power down the server before replacing the DIMM.E. Hold the DIMM modules by the edges only.ADE

QUESTION NO: 63Which statements are true about AMD 2P or 4P system architecture? (Select three)A. Requests for memory access arehandle by the Northbridge ASIC.B. Memory must be installed in banks corresponding to the installed processors.C. Each processor has its own memory controllerD. The maximum amount of memory can be installed, regardless of the number of installedprocessors.E. Requests for memory access arehandle directly by the corresponding processor and relayedthrough the HyperTransport link.F. Communications between CPU and memory ishandle through the QuickPath Interconnect.BCE

QUESTION NO: 64What happens when you install a 66Mhz, 32-bit PCI card in a 33MHz, 64-bit PCI slot?A. The 66MHz, 32-bit card operates at 33MHz in 64-bit mode.B. The 66MHz, 32-bit card operates at 66MHz in 32-bit mode.C. All 33MHz, 64-bit cards on the PCI bus operate like 33MHz, 32-bit cards.D. The 66MHz card operates at 33MHz.D

QUESTION NO: 65What must you check prior to adding another processor to an existing system? (Select Three)A. amount of memory in the systemB. compatibility of the new processor with existing processorsC. firmware requirements for the new processorD. number of users currently logged into the systemE. number of processors the operating system supportsF. weight of the new processorBCE

QUESTION NO: 66What does a system require to achieve PCI Hot Plug capability? (Select three)

A. hot-plug fansB. hog-plug operating systemsC. hot-plug adapter driversD. hot-plug memoryE. hot-plug system trayF. hot-plug platformBCF

QUESTION NO: 67What can you do to optimize memory performance?A. Enable Advanced Memory Buffer.B. Rearrange existing memory to allow interleaving.C. Implement memory cachingD. Configure processor interleaving.B

QUESTION NO: 68A customer is running a single-threaded application and experiences performance problemsconnected with the processor subsystem. How would you solve this issue?A. Change processor affinity to enable splitting single threads into multiple threadsB. Add additional processorsC. Upgrade the processor with a higher frequency processor.D. Replace the processor with a higher stepping processorE. Upgrade the processor with a multi-core processor.F. Enable the integrated memory controller of the process at the BIOS.C

QUESTION NO: 69You are comparing similar versions of Intel Xeon and AMD Opteron processors. Which statementsare true about these processors? (Select two)A. Opteron processors use a Northbridge that operates at core bus speed.B. AMDOpteron processors are optimized for virtualization and AMD-V technology.C. An Intel Xeon processor uses HyperTransport link to access its memory.D. Intel Xeon processors are optimized for virtualization withIntel VT technology.E. An AMD Opteron processors uses QuickPath Interconnect to access its memory.BD

QUESTION NO: 70Why should server firmware be updated to the most recent version? (Select two)A. to maintain a valid warrantyB. to fix problems from earlier versionsC. to support new featuresD. to refresh changes that a user has edited in the existing firmwareE. to supportleagcy featuresBC

QUESTION NO: 71Which command can be used to verify connectivity to a client machine?

A. pingB. nslookupC. nbstatD. ipconfigA

QUESTION NO: 72Which port type does a host server use when connected to an FC-SAN?A. N_PortB. E_PortC. G_PortD. F_PortA

QUESTION NO: 73Which server filters outgoing network requests?A. FTPB. ProxyC. DNSD. WINSB

QUESTION NO: 74Into which range do reserved TCP/IP server ports generally fall?A. 0-1023B. 1-512C. 21-80D. 1024-8080A

QUESTION NO: 75Which Network Operating System (NOS) filesystem allows you to set security on invididual files?A. FAT32B. FATC. NTFSD. CDFSC

QUESTION NO: 76Which Network Operating System (NOS) security practices are commonly used when planningserver management? (Select three)A. disable FTP and SSHB. install hardware and software firewallsC. disable unused TCP/IP service portsD. use easy to remember passwordE. enforce regular password changesBCE

QUESTION NO: 77Which major challenges of I/O virtualization do Virtual Machine Managers need to address?(Select two)A. WWN virtualizationB. DMA virtualizationC. IRQ virtualizationD. port virtualizationE. MAC virtualizationAE

QUESTION NO: 78Which technology should you implement for disk redundancy?A. SATAB. NTFSC. RAIDD. SCSIC

QUESTION NO: 79What is the virtual machine instance commonly called?A. guestB. hostC. partitionD. hypervisorA

QUESTION NO: 80Your RAID 5 array on a Smart Array sustains a drive failure. A host spare replaces the failed driveand rebuilds successfully. After replacing the failed drive with a new drive, what happens next?A. The spare drive replicates its data to the new drive and both work as a mirror until you evict thespare drive.B. The new drive stays offline until you assign it to the array, at which point it automatically takesthe place of the spare drive.C. The new drive re-assumes its place in the RAID set and after data rebuild is complete, the drivethat was the spare once again becomes a hot spare drive.D. The new drive becomes a spare drive and you must go to the ACU to remove the old sparedrive and then re-add the new drive to the array.C

QUESTION NO: 81How many independent parity schemes are utilized for a RAID 6 array?A. 1B. 2C. 4D. 6B

QUESTION NO: 82

What factors are important to sustain the I/O rates of the application within an array? (Select two)A. capacity of the disks within the arrayB. speed of the disks within the arrayC. number of disks within the arrayD. location of the disks within an enclosureBC

QUESTION NO: 83Your customer wants to use Microsoft Windows Clustering for high availability. Which storagetechnology is best suited for this?A. Windows dynamic disksB. Fiber Channel SANC. SATA II Point to PointD. Duplexed Array ControllersB

QUESTION NO: 84Which kind of RAID best suits database log files and offers redundancy and usually betterperformance?A. RAID 0B. RAID 1C. RAID 5D. RAID 6B

QUESTION NO: 85What are advantages of DAS solutions?A. maximum scalabilityB. ease of deploymentC. lowintial costD. snapshot capabilityBC

QUESTION NO: 86Which RAID technology provides the most capacity with the same number of disks?A. RAID 0B. RAID 1C. RAID 4D. RAID 5A

QUESTION NO: 87Your customer's workstation has four 15K rpm SAS drives. The customer wants the best possibleperformance, and is not concerned about data loss. Which RAID level best meets this customer'sneeds?A. RAID 0B. RAID 1C. RAID 5

D. RAID 6A

QUESTION NO: 88You are implementing a tape backup solution on a customer's site. The customer's servers arelocated in two different fire compartments 10m apart. Which SCSI standard can be used at thelowest cost for this environment to integrate a tape library in a different fire compartment?A. UltraB. FastC. LVDD. Fibre ChannelC

QUESTION NO: 89Which type of information is obtained during the site survey? (Select two)A. biggest IT problem todayB. capacity of electrical circuitsC. projected role of the serverD. facility sizeBD

QUESTION NO: 90What is problematic for adata center? (Select two)A. low humidityB. high humidityC. carbon dioxide firesupression systemD. seperate console room for KVM stationsE. inline UPSAB

QUESTION NO: 91What devices off the highest and most sophisticated level of security when restricting access to aserver rom? (Select two)A. retinal scannerB. proximity card readerC. mechanical lockD. fingerprint scannerE. reinforced steel doorF. bulletproof windowAD

QUESTION NO: 92Which protocols are used by in-band management? (Select two)A. TCP/IPB. IPXC. SNMPD. SCSIE. MPIO

AC

QUESTION NO: 93When should a performance baseline be captured?A. after updating the server ROMB. during the peak server usageC. after any hardware or software additions to the systemD. after replacing a failed componentC

QUESTION NO: 94Which statement is true about in-band network management?A. Network ports orswtiches are not used for domain management.B. SSH protocol is used to access and manage the devices.C. Aseperate network is maintaned for each management domain.D. The control and management data share the same network.D

QUESTION NO: 95What is the most efficient way to use external DVD-ROM for ten servers in one rack?A. Useseperate USB DVD-ROMs for each server.B. Connect servers to the KVM switch with attached DVD-ROM.C. Use one DVD-ROM and connect to a single server when needed.D. Connect servers to a SAN switch with attached DVD-ROM.C

QUESTION NO: 96What happens during a normal backup? (Select two)A. The archive bit is set to 1.B. The archive bit is left alone.C. The archive bit is reset to 0.D. The transaction log is cleared.E. The transaction log is left alone.CD

QUESTION NO: 97What happens during a copy backup? (Select two)A. The archive bit is set to 1.B. The archive bit is left alone.C. The archive bit is reset to 0.D. The transaction log is cleared.E. The transaction log is left alone.BE

QUESTION NO: 98If the GFS backup tape rotation plan, how often is the Grandfather backup performed?A. dailyB. weekly

C. monthlyD. quarterlyC

QUESTION NO: 99Inf the GFS backup tape rotation plan, which type of backup is the Father?A. copyB. normalC. differentialD. incrementalB

QUESTION NO: 100A customer is using the GFS backup rotation plan with the weekly backups occuring Fridayevening. The customer needs to restore a file that was known to be good on Friday morning. Fromwhich backup should the customer restore?A. FatherB. DifferentialC. GrandfatherD. SonD

QUESTION NO: 101Which information should a successful backup strategy contain? (Select two)A. passwords for application filesB. number of I/O slots in a serverC. number of users using the systemD. when the data is to be backed upE. off-site storage of backup media locationDE

QUESTION NO: 102You want to prevent a service from starting in the future, as it causes abnormally heavy load in aWindows 2003 Server. What do you do?A. Navigate to C:\WINDOWS\system32 and rename the service.B. Open the Control Panel folder, choose System Properties, and change the startup settings.C. Open a command line window and type net stop <service name>D. Right-Click My Computer,select Manage, go to Services, and set the service to Disable.D

QUESTION NO: 103You are receiving performance complains about a client/server-based application. Given thefollowing information:Network Output Queue Length: 10% Processor Time: 50%% Disk time: 30%Pages/Sec: 3Which server subsystem is the bottleneck?

A. processorB. network connectionC. memoryD. diskB

QUESTION NO: 104You have a disk enclosure with 14 x 72GB Wide-Ultra2 SCSI hard disks connected. You add anadditional disk enclosure with 8 x 146GB Hot-Pluggable Ultra320 SCSI hard disks to an arraycontroller. To optimize performance, you move 3 x 72GB Ultra2 hard disks to a new enclosure tobalance the number of hard disks across two channels.The disks in the new enclosure are not working correctly and the disks are not seen in the arraycontroller management tool. There are no conflicting device IDs and termination is correct. Allenclosures were powered on before powering up the server.What are the possible causes of the problem? (Select two)A. Ultra320 SCSI devices cannot be mixed with Wide-Ultra2 SCSI devices.B. You must update the SCSI Controller BIOS to the latest supported revision.C. The cables and/or connectors are faulty or not properly seated.D. The number of disks exceeds the capability of the controller.E. The SCSI I/O module on the disk enclosure is faulty.BD

QUESTION NO: 105What must be done when replacing a degraded system board in a server? (Select three.)A. Re-order the boot disks.B. Discard the old processors.C. Disconnect all the cables.D. Flash the firmware.E. Re-configure the memory.F. Update the serial number.

QUESTION NO: 106Which steps should you take when adding additional processors to a customer's server? (Selectthree.)A. Verify that the processors are supported.B. Upgrade the BIOS.C. Ensure that the processors are the same type and speed.D. Verify that all installed processors are within foursteppings to avoid system problems.E. Replace the heat sinks on the existing processors.

QUESTION NO: 107Which steps should you take to troubleshoot a possible processor issue? (Select two.)A. Confirm the processor is supported within the server.B. Enable all processor cores in casemulticore processors are used.C. If possible, update the system ROM to the latest supported version.D. If the server is capable of dual processors, install a second processor.E. Enablehyperthreading within the system BIOS

QUESTION NO: 108Which statements are true about the Intel Xeon 5500 (Nehalem) system architecture? (Selectthree.)A. Each processor can access the full complement of installed memory.B. Memory must be installed in banks corresponding to the installed processors.C. Each processor can only access its own memory.D. The maximum amount of memory can be installed, regardless of the number of installedprocessors.E. Communication between CPU and memory is through theQuickPath Interconnect.F. Requests for memory access are handled directly by the corresponding processor and relayedthrough theHyperTransport link.

QUESTION NO: 109Which statement is true about the server front side bus?A. It connects the main memory to the PCI bus.B. It is the bus between the processor and system controller (Northbridge).C. It is the bus between the Northbridge and the memory DIMMS.D. It converts signals to and from the PCI and PCI-Express busB

QUESTION NO: 110Which statements are true about the installation of DIMMs? (Select three.)A. ESD best practices should be followed when handling memory.B. Each bank of DIMMs can contain DIMMs of mixed size and speed.C. Each bank of DIMMs must contain DIMMs of the same size and speed.D. Performance defaults to the higher of the two speeds.E. Performance defaults to the lower of the two speedsABE

QUESTION NO: 111What is the best way to obtain the latest firmware for a server?A. Copy it from another same-model server in your environment.B. Locate the CD that came with the server.C. Call the customer software support line.D. Visit the manufacturer's websiteD

QUESTION NO: 112Which advantages do blade servers have over rack-mount or tower servers? (Select two.)A. more efficient energy utilizationB. more flexibility in selecting processor types and expansionC. greater internal expansionD. better suited for database operationsE. greater densityACE

QUESTION NO: 113What is the most important action you should take to protect your computer from viruses?

A. Regulary download the most recent virus signature file.B. Review virus scanning logs.C. Install a virus cleaner to quarantine files.D. Schedule monthly virus scansA

QUESTION NO: 114What does a Preboot Execution Environment (PXE) do?A. enables you to boot from a CD-ROMB. allows a program to execute remotelyC. allows you to boot from a USB keyD. enables a network connection to a bootable imageD

QUESTION NO: 115What are two ways that an IT organization can become more efficient and effective withvirtualization? (Select two.)A. by decreasing server flexibilityB. by scaling resources up or down, based on changing workload demandsC. by removing the need for backup and disaster recovery servicesD. by using physical resources to their full potentialBD

QUESTION NO: 116You are integrating a RAID array for sequential read, such as audio/video applications. Whatshould you do with striping to achieve optimal performance?A. Increase the stripe size.B. Accept the default stripe size.C. Disable striping.D. Decrease the stripe sizeA

QUESTION NO: 117Which type of external storage solution is ideally suited for file level access?A. SANB. iSCSIC. NASD. JBODD

QUESTION NO: 118Which RAID level maximizes both read performance and capacity but still provides faulttolerance?A. RAID 0B. RAID 1C. RAID 3D. RAID 5D

QUESTION NO: 119You have 4 disks inside a server. Which RAID technology typically offers the best random writeperformance?A. RAID 1+0B. RAID 4C. RAID 5D. RAID 6D

QUESTION NO: 120Which network management protocols are typically supported by system monitoring agents?(Select two.)A. SMTPB. SNMPC. DMID. SSLE. SMBAB

QUESTION NO: 121When is it appropriate to use out-of-band network management? (Select two.)A. when the server resources are adequate and the network drivers are responding to requestsB. when the system is turned on and Emergency Management Services are availableC. when the basic input/output system (BIOS) is conducting the power-on self test (POST)D. when the remote management interface is activeE. when the server is not fully initialized

QUESTION NO: 122What is recommended for a data center? (Select three.)A. high temperatureB. low humidityC. high humidityD. inline UPSE. carbon dioxide fire suppression systemF. separate console room for KVM stationsDEF

QUESTION NO: 123Which industry standard protocol enables administrators to remotely monitor devices in theirnetworks and gives the ability to check the remote device for information?A. SNMPB. SMTPC. PXED. RBTPA

QUESTION NO: 124

What is the minimum number of doors needed to design a mantrap security solution?A. 1B. 2C. 3D. 4A

QUESTION NO: 125You want to add additional CPU and hard drives to the production server. How can you preventthe potential loss of data?A. Synchronize CPU and hard drive status with another server.B. Wait for low utilization of CPU and hard drive.C. Perform a backup.D. Copy production data to another serverC

QUESTION NO: 126A customer requires 500GB of data backup capacity and a data backup rate of greater than100MB/sec. Which backup technology meets these requirements?A. DDSB. SDLTC. UltriumD. Super AITC

QUESTION NO: 127Which tools provided by TCP/IP can be used to verify network connectivity? (Select two.)A. lanscanB. tracerouteC. nbtstatD. pingE. netfmtBD

QUESTION NO: 128Which type of I/O refers to the number of I/O requests the array controller sends to the drives,including RAID overhead?A. Logical I/OB. Physical I/OC. Serial I/OD. Parallel I/OBQUESTION NO: 129Your customer is running Microsoft Exchange Server on a server with 4 dual-core CPUs and isconcerned about possible bottlenecks. Which parameters should you monitor to identifysystemwide bottlenecks for all CPUs?A. Cache Faults/secB. % processor time (_Total)

C. processor %DPC timeD. system processor queueE. % processor time (*)F. C4 transitions/secA

QUESTION NO: 130What can you do if a Linux system is heavily using its page file?A. Add more physical memory.B. Add more processors.C. Increase space for paging.D. Add more disk spaceA

AnswerIncorrect Count Correct 0

Count Inorrect 1230

Percentage

Incorrect

Incorrect

Incorrect

Incorrect

Incorrect