hp z400 2.5 ssd adapter mount - media.prusaprinters.org
TRANSCRIPT
1.75 hrs
1 pcs
f
0.30 mm
k
0.40 mm
h
8
46.00 g
d
MK3/S
Summary
HP Z400 Workstation SSD drive bay adapter for Samsung EVO860 2.5"internal SSD.
Gadgets > Computers
ssdmount ssdadaptor ssd hewlettpackard harddrivemount
harddrive computer
Category: Computer Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Resolution: .3mm
Infill: 10%
Filament: Overture PETG WhiteNotes:
e edZed
HP Z400 2.5" SSDAdapter Mount
VIEW IN BROWSER
updated 15. 2. 2020 | published 12. 2. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
3.5 MB
1.75 hrs f 0.30 mm k 0.40 mm h PET 46.10 g d MK3/S
updated 15. 2. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
733.8 KBupdated 12. 2. 2020
No supports needed to print this.
Counterbored holes are designed with a single layer (bridge layer)between the hole and counterbore. This hole is easily opened by pushing a3mm screw through the holes.
Computer cases can get very warm so recommend you use an appropriatematerial that will withstand the heat without deforming (or worse). PLAmay not be suitable for this part.
Find source .stl files on Thingiverse.com
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use
z400ssd_03mm_petg_mk3s_1h45m.gcode
z400ssd.stl
✔ | Free Cultural Works ✔ | Meets Open Definition