navionics.com

SonarCharts is viewable on the following GPS chartplotters: - All Humminbird models (excluding 595 and Matrix 87)- Lowrance HDS Gen3, HDS Gen2 Touch, HDS Gen2, HDS Gen1, all Elite and Mark (excluding Elite 4, Elite 4DS, Elite 4m, Elite 4m HD, Elite 5, Elite 5 DSI, Elite 5m, Elite 5m HD, Mark 4) - All Raymarine models produced after 2003 (excluding Raychart 400, 435, 435i)- All Simrad and B&G models produced after 2011- Garmin plotters and handhelds with an SD/MSD card slot, purchased before 2015, with software that has not been updated in 2015.

For more information about the above listed plotter manufacturers and others check navionics.com/compatibility.

Find examples of how to select the SonarCharts layer on compatible plotters below:

300 - 1100 Series o Press the Menu softkey twice

o Select the Chart tab using the arrows

o Enter Chart Select menu to switch to Fish ‘N Chip Card

ION & ONIX Series o Select Chart

o Scroll down to Chart Optionso Select Map Datao Check the SonarCharts box

How to view SonarCharts™ on your GPS chartplotter

Gen1 Series o Press the Menu softkey

o Select Chart Options, then press Enter

o Select Fish ‘N Chip, then press Enter soft key to enable/disable Fish ‘N Chip data

Gen2 Serieso Press Menuo Select Chart options in Chart

menu

o Select Viewo Check the Fish ‘N Chip box

Lowrance

navionics.com

Send your sonar logs to Navionics to enhance SonarCharts in your favorite spot. Navionics accepts multiple formats, including Humminbird (DAT and GPX on all models, GPX only on ION and Onix), Lowrance (GPX), Raymarine (SDF, NMEA, GPX), Simrad (GPX), B&G (GPX) and Garmin (ADM).

a Series, c Series, e Series and gS Series - Lighthouse II o Press Menu > Presentation

> Chart Selectiono Select SonarCharts

Dragonflyo Press and hold the

UniControlo Select Chart Settings >

Chart Selectiono Select SonarCharts

o Tap Menu > Chart options > View

o Check the Fish ‘N Chip box

o Select Charts > Navigation Chart

Simrad and B&G

Garmin