how to use this install guide -...
TRANSCRIPT
![Page 1: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/1.jpg)
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.
WARNINGPressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
![Page 2: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/2.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD ECONOLINE
2008-2014RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 3: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/3.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ECONOLINE 2008-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 4: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/4.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ECONOLINE 2008-2014
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 5: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/5.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ECONOLINE 2008-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 6: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/6.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ECONOLINE 2008-2014
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 7: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/7.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ECONOLINE 2008-2014
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center dash, under the radio.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 8: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/8.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ECONOLINE 2008-2014
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 9: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/9.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD EDGE 2007-2010
RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH, SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 10: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/10.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD EDGE 2007-2010
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 11: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/11.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD EDGE 2007-2010
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 12: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/12.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD EDGE 2007-2010
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 13: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/13.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD EDGE 2007-2010
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 14: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/14.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD EDGE 2007-2010
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, right side harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 15: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/15.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD EDGE 2007-2010
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 16: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/16.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD ESCAPE
2008-2012RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 17: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/17.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ESCApE 2008-2012
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 18: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/18.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ESCApE 2008-2012
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 19: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/19.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ESCApE 2008-2012
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 20: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/20.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ESCApE 2008-2012
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 21: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/21.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ESCApE 2008-2012
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Junction connector, behind the radio to the right.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 22: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/22.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ESCApE 2008-2012
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 23: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/23.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD ExPEDITION
2007-2014RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 24: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/24.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpEDITION 2007-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 25: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/25.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpEDITION 2007-2014
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 26: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/26.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpEDITION 2007-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 27: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/27.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpEDITION 2007-2014
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 28: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/28.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpEDITION 2007-2014
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, right side, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 29: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/29.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpEDITION 2007-2014
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 30: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/30.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD ExPLORER
2006-2010RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 31: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/31.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER 2006-2010
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 32: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/32.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER 2006-2010
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 33: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/33.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER 2006-2010
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 34: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/34.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER 2006-2010
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 35: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/35.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER 2006-2010
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ White/Brown (MUX) Center console, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 36: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/36.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER 2006-2010
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 37: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/37.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD ExPLORER SPORT TRAC
2006-2010RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 38: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/38.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER SpORT TRAC 2006-2010
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 39: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/39.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER SpORT TRAC 2006-2010
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 40: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/40.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER SpORT TRAC 2006-2010
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 41: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/41.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER SpORT TRAC 2006-2010
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 42: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/42.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER SpORT TRAC 2006-2010
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ White/Brown (MUX) Center console, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 43: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/43.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD ExpLORER SpORT TRAC 2006-2010
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 44: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/44.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD F-SERIES SUPER DUTy
2008-2010RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 45: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/45.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2008-2010
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 46: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/46.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2008-2010
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 47: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/47.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2008-2010
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 48: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/48.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2008-2010
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 49: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/49.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2008-2010
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Passenger side, next to glove box.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 50: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/50.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2008-2010
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 51: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/51.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD F-SERIES SUPER DUTy
2011-2016RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 52: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/52.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2011-2016
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 53: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/53.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2011-2016
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
3
![Page 54: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/54.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2011-2016
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
3
![Page 55: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/55.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2011-2016
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 3
FO1 T-HARNESS
![Page 56: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/56.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2011-2016
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
![Page 57: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/57.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F-SERIES SUpER DUTY 2011-2016
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 58: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/58.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD F150 2009-2010
RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH, SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 59: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/59.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2009-2010
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 60: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/60.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2009-2010
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 61: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/61.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2009-2010
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 62: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/62.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2009-2010
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 63: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/63.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2009-2010
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center dash, under the tray.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 64: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/64.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2009-2010
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 65: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/65.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD F150 2011-2014
RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH, SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 66: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/66.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2011-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 67: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/67.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2011-2014
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
3
![Page 68: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/68.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2011-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
3
![Page 69: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/69.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2011-2014
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 3
FO1 T-HARNESS
![Page 70: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/70.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2011-2014
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
![Page 71: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/71.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD F150 2011-2014
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 72: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/72.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD FIvE hUNDRED
2006-2007RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 73: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/73.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FIVE HUNDRED 2006-2007
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 74: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/74.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FIVE HUNDRED 2006-2007
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
3
![Page 75: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/75.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FIVE HUNDRED 2006-2007
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
3
![Page 76: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/76.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FIVE HUNDRED 2006-2007
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 3
FO1 T-HARNESS
![Page 77: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/77.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FIVE HUNDRED 2006-2007
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
![Page 78: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/78.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FIVE HUNDRED 2006-2007
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 79: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/79.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD FLEx 2009-2012
RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH, SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 80: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/80.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FLEx 2009-2012
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 81: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/81.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FLEx 2009-2012
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 82: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/82.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FLEx 2009-2012
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 83: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/83.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FLEx 2009-2012
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 84: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/84.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FLEx 2009-2012
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, junctionconnector, in front of the shifter.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 85: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/85.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FLEx 2009-2012
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 86: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/86.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD FOCUS 2008-2011
RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH, SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 87: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/87.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FOCUS 2008-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 88: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/88.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FOCUS 2008-2011
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 89: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/89.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FOCUS 2008-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 90: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/90.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FOCUS 2008-2011
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 91: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/91.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FOCUS 2008-2011
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, horizontal harness on the heater box.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 92: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/92.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FOCUS 2008-2011
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 93: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/93.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD FUSION 2006-2012
RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH, SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 94: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/94.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FUSION 2006-2012
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 95: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/95.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FUSION 2006-2012
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 96: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/96.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FUSION 2006-2012
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 97: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/97.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FUSION 2006-2012
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 98: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/98.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FUSION 2006-2012
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, right side, in front of the arm rest.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 99: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/99.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD FUSION 2006-2012
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 100: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/100.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD MUSTANG
2007-2012RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 101: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/101.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG 2007-2012
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 102: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/102.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG 2007-2012
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 103: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/103.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG 2007-2012
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 104: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/104.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG 2007-2012
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 105: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/105.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG 2007-2012
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange or Blue (MUX) Sync unit, behind the glove box.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 106: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/106.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG 2007-2012
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 107: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/107.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD MUSTANGBASE 2013-2014
RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH, SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 108: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/108.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG BASE 2013-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 109: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/109.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG BASE 2013-2014
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 110: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/110.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG BASE 2013-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 111: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/111.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG BASE 2013-2014
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 112: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/112.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG BASE 2013-2014
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange or Blue (MUX) Sync unit, behind the glove box.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 113: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/113.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG BASE 2013-2014
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 114: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/114.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD MUSTANG
ShAkER 2013-2014RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 115: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/115.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER 2013-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 116: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/116.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER 2013-2014
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
2
![Page 117: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/117.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER 2013-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
2
![Page 118: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/118.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER 2013-2014
Automotive Data Solutions Inc. © 2015 5
C
A
H
FG
D
C
A
G
F
H
D
AUX INAUX IN
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
SUB INCENTER IN
SUB INCENTER IN
OBDII CONNECTOR
MAESTRO RR MODULE
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
RCA CABLES
RCA CABLES
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
FO1 T-HARNESS
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 5
STEP 6
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
![Page 119: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/119.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER 2013-2014
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange or Blue (MUX) Sync unit, behind the glove box.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 120: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/120.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER 2013-2014
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 121: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/121.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD MUSTANG
ShAkER PRO 2013-2014RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 122: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/122.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER pRO 2013-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 123: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/123.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER pRO 2013-2014
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
2
![Page 124: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/124.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER pRO 2013-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
2
![Page 125: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/125.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER pRO 2013-2014
Automotive Data Solutions Inc. © 2015 5
C
A
H
FG
D
C
A
G
F
H
D
AUX INAUX IN
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
SUB INCENTER IN
SUB INCENTER IN
OBDII CONNECTOR
MAESTRO RR MODULE
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
RCA CABLES
RCA CABLES
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
FO1 T-HARNESS
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 5
STEP 6
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
![Page 126: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/126.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER pRO 2013-2014
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange or Blue (MUX) Sync unit, behind the glove box.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 127: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/127.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD MUSTANG SHAkER pRO 2013-2014
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 128: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/128.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD TAURUS
2008-2009RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 129: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/129.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2008-2009
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 130: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/130.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2008-2009
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 131: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/131.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2008-2009
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 132: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/132.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2008-2009
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 133: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/133.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2008-2009
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Gray/Blue (MUX) Center console, right side, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 134: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/134.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2008-2009
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 135: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/135.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD TAURUS
2010-2012RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 136: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/136.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2010-2012
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 137: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/137.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2010-2012
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 138: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/138.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2010-2012
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 139: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/139.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2010-2012
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 140: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/140.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2010-2012
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, right side, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 141: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/141.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS 2010-2012
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 142: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/142.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEFORD TAURUS x
2008-2012RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 143: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/143.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS x 2008-2012
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 144: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/144.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS x 2008-2012
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 145: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/145.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS x 2008-2012
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 146: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/146.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS x 2008-2012
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 147: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/147.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS x 2008-2012
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, right side, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 148: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/148.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
FORD TAURUS x 2008-2012
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 149: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/149.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDELINCOLN MkS
2009-2012RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 150: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/150.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkS 2009-2012
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 151: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/151.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkS 2009-2012
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 152: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/152.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkS 2009-2012
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 153: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/153.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkS 2009-2012
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 154: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/154.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkS 2009-2012
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, right side, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 155: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/155.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkS 2009-2012
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 156: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/156.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDELINCOLN MkT
2010-2012RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 157: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/157.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkT 2010-2012
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 158: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/158.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkT 2010-2012
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 159: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/159.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkT 2010-2012
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 160: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/160.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkT 2010-2012
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 161: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/161.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkT 2010-2012
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, right side, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 162: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/162.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkT 2010-2012
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 163: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/163.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDELINCOLN Mkx
2007-2010RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 164: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/164.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN Mkx 2007-2010
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 165: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/165.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN Mkx 2007-2010
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 166: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/166.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN Mkx 2007-2010
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 167: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/167.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN Mkx 2007-2010
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 168: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/168.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN Mkx 2007-2010
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, right side, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 169: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/169.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN Mkx 2007-2010
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 170: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/170.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDELINCOLN MkZ
2007-2012RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 171: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/171.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkZ 2007-2012
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 172: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/172.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkZ 2007-2012
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 173: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/173.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkZ 2007-2012
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 174: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/174.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkZ 2007-2012
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 175: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/175.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkZ 2007-2012
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, right side, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 176: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/176.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN MkZ 2007-2012
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 177: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/177.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDELINCOLN NAvIGATOR
2007-2014RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 178: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/178.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN NAVIGATOR 2007-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 179: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/179.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN NAVIGATOR 2007-2014
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 180: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/180.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN NAVIGATOR 2007-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 181: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/181.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN NAVIGATOR 2007-2014
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 182: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/182.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN NAVIGATOR 2007-2014
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Sync unit, center console.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 183: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/183.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN NAVIGATOR 2007-2014
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 184: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/184.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDELINCOLN ZEPhyR
2006RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 185: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/185.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN ZEpHYR 2006
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 186: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/186.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN ZEpHYR 2006
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
3
![Page 187: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/187.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN ZEpHYR 2006
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
3
![Page 188: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/188.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN ZEpHYR 2006
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 3
FO1 T-HARNESS
![Page 189: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/189.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN ZEpHYR 2006
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
![Page 190: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/190.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
LINCOLN ZEpHYR 2006
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 191: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/191.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEMAZDA TRIBUTE
2008-2011RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 192: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/192.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MAZDA TRIBUTE 2008-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 193: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/193.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MAZDA TRIBUTE 2008-2011
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
3
![Page 194: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/194.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MAZDA TRIBUTE 2008-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
3
![Page 195: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/195.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MAZDA TRIBUTE 2008-2011
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 3
FO1 T-HARNESS
![Page 196: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/196.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MAZDA TRIBUTE 2008-2011
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
![Page 197: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/197.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MAZDA TRIBUTE 2008-2011
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 198: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/198.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEMERCURy MARINER
2008-2011RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 199: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/199.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MARINER 2008-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 200: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/200.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MARINER 2008-2011
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 201: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/201.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MARINER 2008-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 202: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/202.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MARINER 2008-2011
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 203: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/203.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MARINER 2008-2011
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Junction connector, behind the radio to the right.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 204: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/204.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MARINER 2008-2011
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 205: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/205.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEMERCURy MILAN
2006-2011RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 206: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/206.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MILAN 2006-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 207: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/207.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MILAN 2006-2011
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 208: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/208.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MILAN 2006-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 209: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/209.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MILAN 2006-2011
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 210: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/210.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MILAN 2006-2011
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Blue/Orange (MUX) Center console, right side, in front of the arm rest.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 211: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/211.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MILAN 2006-2011
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 212: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/212.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEMERCURy MONTEGO
2005-2007RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 213: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/213.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MONTEGO 2005-2007
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 214: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/214.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MONTEGO 2005-2007
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
3
![Page 215: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/215.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MONTEGO 2005-2007
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
3
![Page 216: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/216.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MONTEGO 2005-2007
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 3
FO1 T-HARNESS
![Page 217: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/217.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MONTEGO 2005-2007
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
![Page 218: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/218.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MONTEGO 2005-2007
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 219: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/219.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEMERCURy MOUNTAINEER
2006-2010RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 220: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/220.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MOUNTAINEER 2006-2010
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 221: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/221.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MOUNTAINEER 2006-2010
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 222: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/222.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MOUNTAINEER 2006-2010
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 223: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/223.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MOUNTAINEER 2006-2010
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 224: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/224.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MOUNTAINEER 2006-2010
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ White/Brown (MUX) Center console, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 225: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/225.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY MOUNTAINEER 2006-2010
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 226: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/226.jpg)
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS2
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
INSTALL GUIDEMERCURy SABLE
2008-2009RETAINS STEERING WHEEL CONTROLS SYNC VOICE COMMANDS, SYNC BLUETOOTH,
SIRIUS SATELLITE AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
![Page 227: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/227.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY SABLE 2008-2009
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 228: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/228.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY SABLE 2008-2009
Automotive Data Solutions Inc. © 2015 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of FO1 T-harness to WHITE/BLUE wire of the OBDII connector located at pin 6.
• Connect the YELLOW/BROWN wire of FO1 T-harness to the WHITE wire of the OBDII connector located at pin 14.
NOTE:
Connections not required for 2014-2015 Pioneer radios.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
NOTE:
In Pioneer radios: plug Audio cable in auxiliary input of the radio.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module.
MODULE PROGRAMMING• Open the vehicle driver door, insert the key into the ignition
and turn it to the ACC position.
• The OEM Bluetooth is OFF by default. To activate it, go to the radio screen, scroll down to FORD SETUP, press SET, go to the OEM Bluetooth and press ON, then Press the BACK button (circular shaped arrow).
• Scroll down, press FINISH and wait. Press START, then press NEXT.
• Now follow the radio screen instructions while performing the following steps: Turn the key to the OFF position, then to the ACC position, turn it back to the OFF position, then to the ACC position.
The module is now programmed and ready to be used. To access the new menus, press on FORD FEATURES.
• Test all the functionalities then reassemble the dashboard carefully.
1
![Page 229: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/229.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY SABLE 2008-2009
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
![Page 230: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/230.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY SABLE 2008-2009
Automotive Data Solutions Inc. © 2015 5
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
C
A
H
FG
D
C
A
G
F
H
D
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1
STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
AUDIOCABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
REFER TO WIRE CHARTFOR WIRE LOCATION
WIRES FROMVEHICLE
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
WHITE/BLUEWHITE/BLUE
WHITEWHITE
RED/BROWN - CAN2H
YELLOW/BROWN - CAN2L
STEP 4
FO1 T-HARNESS
![Page 231: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/231.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY SABLE 2008-2009
Automotive Data Solutions Inc. © 2015 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Can2H OBDII ~ 16 pin 06 White/Blue (DATA) OBDII connector, under driver side dash
Can2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 2 ~ ~ ~ ~ Gray/Blue (MUX) Center console, right side, harness going to the back.
SWI 2 connection is required only if vehicle is equipped with Sync.
![Page 232: HOW TO USE THIS INSTALL GUIDE - iDatalinkcdncontent2.idatalink.com/corporate/Content/Manuals/RR-FOR/ADS-RR... · OPTIONAL ACCESSORIES None PROGRAMMED FIRMWARE ADS-RR(SR)-FOR01-DS2](https://reader030.vdocuments.mx/reader030/viewer/2022013117/5a7929807f8b9a217b8d8d35/html5/thumbnails/232.jpg)
ADS-RR(SR)-FOR01-DS2 maestro.idatalink.com
MERCURY SABLE 2008-2009
Automotive Data Solutions Inc. © 2015 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink