how to use m-turbo ultrasound machine
TRANSCRIPT
+
How to Use the M-Turbo
Ultrasound Machine
Petra Duran-Gehring, M.D.
University of Florida- Jacksonville
Department of Emergency Medicine
+Objectives
Learn how to save images on the M-Turbo
Learn the knobology of the M-Turbo
Learn to create reports on your studies
+M-Turbo
+Starting Off
Turn the machine on by
pressing the power button
+Start Up Screen
+Let’s Get Started…
Input your
patient’s
data
Press
“Patient”
button
+Patient Information Screen
+Input Your Information
Clear the
screen,
press
“New/End”Input
patient
data
Input
your 3
initials in
the
“User”
field
+Bar Code Scanner
With the machine plugged
in, you can use the
barcode scanner to input
the patient’s MR number
and then your user ID
+Choose Your Weapon
Choose the probe by
pressing the
corresponding triple
connect button
+Choose Your Exam
Pick the exam type from the menu
Exam types differ with different probes
Press “Exam” button
+Ready to Scan?
Almost, just a
few more
buttons to find
+Important Buttons To Know
Freeze an
image
Select
from
menu
Shoot 6
second
video
clip
Save an
image
Depth of
image
adjustment
+What’s Wrong With My Image?
+Adjust Your Gain
Turn dial to adjust
“Gain”
TGC controls
located above
+What Have I Done?
If the gain
appears over
adjusted, start
over by
pressing “Auto
Gain”
+Other Modes
+Need to Measure That?
Press “Calcs” to
save a
measurement
+Calculations
Choose type from
calculations menu Click on the
measurement
typeMeasure
Don’t Forget to
Save!
+Done Scanning?
Not Quite….Still need to
do a Report
+Reports
Press
“Report”
+Report Screen
Select
Type
+Choose Report Type and Complete
Report
+Finishing the Report
Save your report
Press “Done” to
exit report
Type in Attending
Physician of record
in the comments
box
Att: Duran
+Ending It All
Go back to the patient
screen and press
“New/End”
+The End!!!!
Whooohooo!!
! We’re
through!